Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (33 commits)
  sh: Fix test of unsigned in se7722_irq_demux()
  sh: mach-ecovec24: Add FSI sound support
  sh: mach-ecovec24: Add mt9t112 camera support
  sh: mach-ecovec24: Add tw9910 support
  sh: MSIOF/mmc_spi platform data for the Ecovec24 board
  sh: ms7724se: Add ak4642 support
  sh: Fix up FPU build for SH5
  sh: Remove old early serial console code V2
  sh: sh5 scif pdata (sh5-101/sh5-103)
  sh: sh4a scif pdata (sh7757/sh7763/sh7770/sh7780/sh7785/sh7786/x3)
  sh: sh4a scif pdata (sh7343/sh7366/sh7722/sh7723/sh7724)
  sh: sh4 scif pdata (sh7750/sh7760/sh4-202)
  sh: sh3 scif pdata (sh7705/sh770x/sh7710/sh7720)
  sh: sh2a scif pdata (sh7201/sh7203/sh7206/mxg)
  sh: sh2 scif pdata (sh7616)
  sh-sci: Extend sh-sci driver with early console V2
  sh: Stub in P3 ioremap support for nommu parts.
  sh: wire up vmallocinfo support in ioremap() implementations.
  sh: Make the unaligned trap handler always obey notification levels.
  sh: Couple kernel and user write page perm bits for CONFIG_X2TLB
  ...

6 files changed, 350 insertions, 6 deletions

diff --git a/arch/sh/boards/mach-ap325rxa/setup.c b/arch/sh/boards/mach-ap325rxa/setup.c
index 7a9f69663f1a..1f5fa5c44f6d 100644
--- a/arch/sh/boards/mach-ap325rxa/setup.c
+++ b/arch/sh/boards/mach-ap325rxa/setup.c
@@ -323,7 +323,8 @@ static struct soc_camera_platform_info camera_info = {
                 .height = 480,
         },
         .bus_param = SOCAM_PCLK_SAMPLE_RISING | SOCAM_HSYNC_ACTIVE_HIGH |
-        SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_MASTER | SOCAM_DATAWIDTH_8,
+        SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_MASTER | SOCAM_DATAWIDTH_8 |
+        SOCAM_DATA_ACTIVE_HIGH,
         .set_capture = camera_set_capture,
 };
 
diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c
index 826e62326d51..194aaca22d47 100644
--- a/arch/sh/boards/mach-ecovec24/setup.c
+++ b/arch/sh/boards/mach-ecovec24/setup.c
@@ -19,11 +19,18 @@
 #include <linux/usb/r8a66597.h>
 #include <linux/i2c.h>
 #include <linux/i2c/tsc2007.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/sh_msiof.h>
+#include <linux/spi/mmc_spi.h>
+#include <linux/mmc/host.h>
 #include <linux/input.h>
 #include <linux/input/sh_keysc.h>
 #include <linux/mfd/sh_mobile_sdhi.h>
 #include <video/sh_mobile_lcdc.h>
+#include <sound/sh_fsi.h>
 #include <media/sh_mobile_ceu.h>
+#include <media/tw9910.h>
+#include <media/mt9t112.h>
 #include <asm/heartbeat.h>
 #include <asm/sh_eth.h>
 #include <asm/clock.h>
@@ -338,6 +345,12 @@ static struct platform_device ceu1_device = {
 };
 
 /* I2C device */
+static struct i2c_board_info i2c0_devices[] = {
+        {
+                I2C_BOARD_INFO("da7210", 0x1a),
+        },
+};
+
 static struct i2c_board_info i2c1_devices[] = {
         {
                 I2C_BOARD_INFO("r2025sd", 0x32),
@@ -421,6 +434,7 @@ static struct i2c_board_info ts_i2c_clients = {
         .irq            = IRQ0,
 };
 
+#ifdef CONFIG_MFD_SH_MOBILE_SDHI
 /* SHDI0 */
 static void sdhi0_set_pwr(struct platform_device *pdev, int state)
 {
@@ -493,6 +507,248 @@ static struct platform_device sdhi1_device = {
         },
 };
 
+#else
+
+static int mmc_spi_get_ro(struct device *dev)
+{
+        return gpio_get_value(GPIO_PTY6);
+}
+
+static int mmc_spi_get_cd(struct device *dev)
+{
+        return !gpio_get_value(GPIO_PTY7);
+}
+
+static void mmc_spi_setpower(struct device *dev, unsigned int maskval)
+{
+        gpio_set_value(GPIO_PTB6, maskval ? 1 : 0);
+}
+
+static struct mmc_spi_platform_data mmc_spi_info = {
+        .get_ro = mmc_spi_get_ro,
+        .get_cd = mmc_spi_get_cd,
+        .caps = MMC_CAP_NEEDS_POLL,
+        .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, /* 3.3V only */
+        .setpower = mmc_spi_setpower,
+};
+
+static struct spi_board_info spi_bus[] = {
+        {
+                .modalias       = "mmc_spi",
+                .platform_data  = &mmc_spi_info,
+                .max_speed_hz   = 5000000,
+                .mode           = SPI_MODE_0,
+                .controller_data = (void *) GPIO_PTM4,
+        },
+};
+
+static struct sh_msiof_spi_info msiof0_data = {
+        .num_chipselect = 1,
+};
+
+static struct resource msiof0_resources[] = {
+        [0] = {
+                .name   = "MSIOF0",
+                .start  = 0xa4c40000,
+                .end    = 0xa4c40063,
+                .flags  = IORESOURCE_MEM,
+        },
+        [1] = {
+                .start  = 84,
+                .flags  = IORESOURCE_IRQ,
+        },
+};
+
+static struct platform_device msiof0_device = {
+        .name           = "spi_sh_msiof",
+        .id             = 0, /* MSIOF0 */
+        .dev = {
+                .platform_data = &msiof0_data,
+        },
+        .num_resources  = ARRAY_SIZE(msiof0_resources),
+        .resource       = msiof0_resources,
+        .archdata = {
+                .hwblk_id = HWBLK_MSIOF0,
+        },
+};
+
+#endif
+
+/* I2C Video/Camera */
+static struct i2c_board_info i2c_camera[] = {
+        {
+                I2C_BOARD_INFO("tw9910", 0x45),
+        },
+        {
+                /* 1st camera */
+                I2C_BOARD_INFO("mt9t112", 0x3c),
+        },
+        {
+                /* 2nd camera */
+                I2C_BOARD_INFO("mt9t112", 0x3c),
+        },
+};
+
+/* tw9910 */
+static int tw9910_power(struct device *dev, int mode)
+{
+        int val = mode ? 0 : 1;
+
+        gpio_set_value(GPIO_PTU2, val);
+        if (mode)
+                mdelay(100);
+
+        return 0;
+}
+
+static struct tw9910_video_info tw9910_info = {
+        .buswidth       = SOCAM_DATAWIDTH_8,
+        .mpout          = TW9910_MPO_FIELD,
+};
+
+static struct soc_camera_link tw9910_link = {
+        .i2c_adapter_id = 0,
+        .bus_id         = 1,
+        .power          = tw9910_power,
+        .board_info     = &i2c_camera[0],
+        .module_name    = "tw9910",
+        .priv           = &tw9910_info,
+};
+
+/* mt9t112 */
+static int mt9t112_power1(struct device *dev, int mode)
+{
+        gpio_set_value(GPIO_PTA3, mode);
+        if (mode)
+                mdelay(100);
+
+        return 0;
+}
+
+static struct mt9t112_camera_info mt9t112_info1 = {
+        .flags = MT9T112_FLAG_PCLK_RISING_EDGE | MT9T112_FLAG_DATAWIDTH_8,
+        .divider = { 0x49, 0x6, 0, 6, 0, 9, 9, 6, 0 }, /* for 24MHz */
+};
+
+static struct soc_camera_link mt9t112_link1 = {
+        .i2c_adapter_id = 0,
+        .power          = mt9t112_power1,
+        .bus_id         = 0,
+        .board_info     = &i2c_camera[1],
+        .module_name    = "mt9t112",
+        .priv           = &mt9t112_info1,
+};
+
+static int mt9t112_power2(struct device *dev, int mode)
+{
+        gpio_set_value(GPIO_PTA4, mode);
+        if (mode)
+                mdelay(100);
+
+        return 0;
+}
+
+static struct mt9t112_camera_info mt9t112_info2 = {
+        .flags = MT9T112_FLAG_PCLK_RISING_EDGE | MT9T112_FLAG_DATAWIDTH_8,
+        .divider = { 0x49, 0x6, 0, 6, 0, 9, 9, 6, 0 }, /* for 24MHz */
+};
+
+static struct soc_camera_link mt9t112_link2 = {
+        .i2c_adapter_id = 1,
+        .power          = mt9t112_power2,
+        .bus_id         = 1,
+        .board_info     = &i2c_camera[2],
+        .module_name    = "mt9t112",
+        .priv           = &mt9t112_info2,
+};
+
+static struct platform_device camera_devices[] = {
+        {
+                .name   = "soc-camera-pdrv",
+                .id     = 0,
+                .dev    = {
+                        .platform_data = &tw9910_link,
+                },
+        },
+        {
+                .name   = "soc-camera-pdrv",
+                .id     = 1,
+                .dev    = {
+                        .platform_data = &mt9t112_link1,
+                },
+        },
+        {
+                .name   = "soc-camera-pdrv",
+                .id     = 2,
+                .dev    = {
+                        .platform_data = &mt9t112_link2,
+                },
+        },
+};
+
+/* FSI */
+/*
+ * FSI-B use external clock which came from da7210.
+ * So, we should change parent of fsi
+ */
+#define FCLKBCR         0xa415000c
+static void fsimck_init(struct clk *clk)
+{
+        u32 status = ctrl_inl(clk->enable_reg);
+
+        /* use external clock */
+        status &= ~0x000000ff;
+        status |= 0x00000080;
+
+        ctrl_outl(status, clk->enable_reg);
+}
+
+static struct clk_ops fsimck_clk_ops = {
+        .init = fsimck_init,
+};
+
+static struct clk fsimckb_clk = {
+        .name           = "fsimckb_clk",
+        .id             = -1,
+        .ops            = &fsimck_clk_ops,
+        .enable_reg     = (void __iomem *)FCLKBCR,
+        .rate           = 0, /* unknown */
+};
+
+struct sh_fsi_platform_info fsi_info = {
+        .portb_flags = SH_FSI_BRS_INV |
+                       SH_FSI_OUT_SLAVE_MODE |
+                       SH_FSI_IN_SLAVE_MODE |
+                       SH_FSI_OFMT(I2S) |
+                       SH_FSI_IFMT(I2S),
+};
+
+static struct resource fsi_resources[] = {
+        [0] = {
+                .name   = "FSI",
+                .start  = 0xFE3C0000,
+                .end    = 0xFE3C021d,
+                .flags  = IORESOURCE_MEM,
+        },
+        [1] = {
+                .start  = 108,
+                .flags  = IORESOURCE_IRQ,
+        },
+};
+
+static struct platform_device fsi_device = {
+        .name           = "sh_fsi",
+        .id             = 0,
+        .num_resources  = ARRAY_SIZE(fsi_resources),
+        .resource       = fsi_resources,
+        .dev    = {
+                .platform_data  = &fsi_info,
+        },
+        .archdata = {
+                .hwblk_id = HWBLK_SPU, /* FSI needs SPU hwblk */
+        },
+};
+
 static struct platform_device *ecovec_devices[] __initdata = {
         &heartbeat_device,
         &nor_flash_device,
@@ -503,8 +759,16 @@ static struct platform_device *ecovec_devices[] __initdata = {
         &ceu0_device,
         &ceu1_device,
         &keysc_device,
+#ifdef CONFIG_MFD_SH_MOBILE_SDHI
         &sdhi0_device,
         &sdhi1_device,
+#else
+        &msiof0_device,
+#endif
+        &camera_devices[0],
+        &camera_devices[1],
+        &camera_devices[2],
+        &fsi_device,
 };
 
 #define EEPROM_ADDR 0x50
@@ -560,6 +824,8 @@ extern char ecovec24_sdram_leave_end;
 
 static int __init arch_setup(void)
 {
+        struct clk *clk;
+
         /* register board specific self-refresh code */
         sh_mobile_register_self_refresh(SUSP_SH_STANDBY | SUSP_SH_SF,
                                         &ecovec24_sdram_enter_start,
@@ -773,7 +1039,8 @@ static int __init arch_setup(void)
         gpio_direction_input(GPIO_PTR5);
         gpio_direction_input(GPIO_PTR6);
 
-        /* enable SDHI0 (needs DS2.4 set to ON) */
+#ifdef CONFIG_MFD_SH_MOBILE_SDHI
+        /* enable SDHI0 on CN11 (needs DS2.4 set to ON) */
         gpio_request(GPIO_FN_SDHI0CD,  NULL);
         gpio_request(GPIO_FN_SDHI0WP,  NULL);
         gpio_request(GPIO_FN_SDHI0CMD, NULL);
@@ -785,7 +1052,7 @@ static int __init arch_setup(void)
         gpio_request(GPIO_PTB6, NULL);
         gpio_direction_output(GPIO_PTB6, 0);
 
-        /* enable SDHI1 (needs DS2.6,7 set to ON,OFF) */
+        /* enable SDHI1 on CN12 (needs DS2.6,7 set to ON,OFF) */
         gpio_request(GPIO_FN_SDHI1CD,  NULL);
         gpio_request(GPIO_FN_SDHI1WP,  NULL);
         gpio_request(GPIO_FN_SDHI1CMD, NULL);
@@ -799,8 +1066,59 @@ static int __init arch_setup(void)
 
         /* I/O buffer drive ability is high for SDHI1 */
         ctrl_outw((ctrl_inw(IODRIVEA) & ~0x3000) | 0x2000 , IODRIVEA);
+#else
+        /* enable MSIOF0 on CN11 (needs DS2.4 set to OFF) */
+        gpio_request(GPIO_FN_MSIOF0_TXD, NULL);
+        gpio_request(GPIO_FN_MSIOF0_RXD, NULL);
+        gpio_request(GPIO_FN_MSIOF0_TSCK, NULL);
+        gpio_request(GPIO_PTM4, NULL); /* software CS control of TSYNC pin */
+        gpio_direction_output(GPIO_PTM4, 1); /* active low CS */
+        gpio_request(GPIO_PTB6, NULL); /* 3.3V power control */
+        gpio_direction_output(GPIO_PTB6, 0); /* disable power by default */
+        gpio_request(GPIO_PTY6, NULL); /* write protect */
+        gpio_direction_input(GPIO_PTY6);
+        gpio_request(GPIO_PTY7, NULL); /* card detect */
+        gpio_direction_input(GPIO_PTY7);
+
+        spi_register_board_info(spi_bus, ARRAY_SIZE(spi_bus));
+#endif
+
+        /* enable Video */
+        gpio_request(GPIO_PTU2, NULL);
+        gpio_direction_output(GPIO_PTU2, 1);
+
+        /* enable Camera */
+        gpio_request(GPIO_PTA3, NULL);
+        gpio_request(GPIO_PTA4, NULL);
+        gpio_direction_output(GPIO_PTA3, 0);
+        gpio_direction_output(GPIO_PTA4, 0);
+
+        /* enable FSI */
+        gpio_request(GPIO_FN_FSIMCKB,    NULL);
+        gpio_request(GPIO_FN_FSIIBSD,    NULL);
+        gpio_request(GPIO_FN_FSIOBSD,    NULL);
+        gpio_request(GPIO_FN_FSIIBBCK,   NULL);
+        gpio_request(GPIO_FN_FSIIBLRCK,  NULL);
+        gpio_request(GPIO_FN_FSIOBBCK,   NULL);
+        gpio_request(GPIO_FN_FSIOBLRCK,  NULL);
+        gpio_request(GPIO_FN_CLKAUDIOBO, NULL);
+
+        /* change parent of FSI B */
+        clk = clk_get(NULL, "fsib_clk");
+        clk_register(&fsimckb_clk);
+        clk_set_parent(clk, &fsimckb_clk);
+        clk_set_rate(clk, 11000);
+        clk_set_rate(&fsimckb_clk, 11000);
+        clk_put(clk);
+
+        gpio_request(GPIO_PTU0, NULL);
+        gpio_direction_output(GPIO_PTU0, 0);
+        mdelay(20);
 
         /* enable I2C device */
+        i2c_register_board_info(0, i2c0_devices,
+                                ARRAY_SIZE(i2c0_devices));
+
         i2c_register_board_info(1, i2c1_devices,
                                 ARRAY_SIZE(i2c1_devices));
 
diff --git a/arch/sh/boards/mach-kfr2r09/lcd_wqvga.c b/arch/sh/boards/mach-kfr2r09/lcd_wqvga.c
index 8ccb1cc8b589..e9b970846c41 100644
--- a/arch/sh/boards/mach-kfr2r09/lcd_wqvga.c
+++ b/arch/sh/boards/mach-kfr2r09/lcd_wqvga.c
@@ -273,6 +273,12 @@ int kfr2r09_lcd_setup(void *board_data, void *sohandle,
         return 0;
 }
 
+void kfr2r09_lcd_start(void *board_data, void *sohandle,
+                       struct sh_mobile_lcdc_sys_bus_ops *so)
+{
+        write_memory_start(sohandle, so);
+}
+
 #define CTRL_CKSW       0x10
 #define CTRL_C10        0x20
 #define CTRL_CPSW       0x80
diff --git a/arch/sh/boards/mach-kfr2r09/setup.c b/arch/sh/boards/mach-kfr2r09/setup.c
index 9038d768a525..5d7b5d92475e 100644
--- a/arch/sh/boards/mach-kfr2r09/setup.c
+++ b/arch/sh/boards/mach-kfr2r09/setup.c
@@ -150,6 +150,7 @@ static struct sh_mobile_lcdc_info kfr2r09_sh_lcdc_info = {
                 },
                 .board_cfg = {
                         .setup_sys = kfr2r09_lcd_setup,
+                        .start_transfer = kfr2r09_lcd_start,
                         .display_on = kfr2r09_lcd_on,
                         .display_off = kfr2r09_lcd_off,
                 },
diff --git a/arch/sh/boards/mach-se/7722/irq.c b/arch/sh/boards/mach-se/7722/irq.c
index 4eb31acfafef..b221b6842b0d 100644
--- a/arch/sh/boards/mach-se/7722/irq.c
+++ b/arch/sh/boards/mach-se/7722/irq.c
@@ -57,15 +57,16 @@ static void se7722_irq_demux(unsigned int irq, struct irq_desc *desc)
  */
 void __init init_se7722_IRQ(void)
 {
-        int i;
+        int i, irq;
 
         ctrl_outw(0, IRQ01_MASK);       /* disable all irqs */
         ctrl_outw(0x2000, 0xb03fffec);  /* mrshpc irq enable */
 
         for (i = 0; i < SE7722_FPGA_IRQ_NR; i++) {
-                se7722_fpga_irq[i] = create_irq();
-                if (se7722_fpga_irq[i] < 0)
+                irq = create_irq();
+                if (irq < 0)
                         return;
+                se7722_fpga_irq[i] = irq;
 
                 set_irq_chip_and_handler_name(se7722_fpga_irq[i],
                                               &se7722_irq_chip,
diff --git a/arch/sh/boards/mach-se/7724/setup.c b/arch/sh/boards/mach-se/7724/setup.c
index 4b0f0c0dc2b8..5d0f70b46c97 100644
--- a/arch/sh/boards/mach-se/7724/setup.c
+++ b/arch/sh/boards/mach-se/7724/setup.c
@@ -514,6 +514,13 @@ static struct platform_device *ms7724se_devices[] __initdata = {
         &sdhi1_cn8_device,
 };
 
+/* I2C device */
+static struct i2c_board_info i2c0_devices[] = {
+        {
+                I2C_BOARD_INFO("ak4642", 0x12),
+        },
+};
+
 #define EEPROM_OP   0xBA206000
 #define EEPROM_ADR  0xBA206004
 #define EEPROM_DATA 0xBA20600C
@@ -575,6 +582,16 @@ extern char ms7724se_sdram_enter_end;
 extern char ms7724se_sdram_leave_start;
 extern char ms7724se_sdram_leave_end;
 
+
+static int __init arch_setup(void)
+{
+        /* enable I2C device */
+        i2c_register_board_info(0, i2c0_devices,
+                                ARRAY_SIZE(i2c0_devices));
+        return 0;
+}
+arch_initcall(arch_setup);
+
 static int __init devices_setup(void)
 {
         u16 sw = ctrl_inw(SW4140); /* select camera, monitor */