[S390] head.S code moving.

There is almost no room left for any new code between 0x10000
and 0x10480. Move the code from 0x10000 to 0x11000.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

1 files changed, 39 insertions, 40 deletions

diff --git a/arch/s390/kernel/head64.S b/arch/s390/kernel/head64.S
index ad5d87f3aef3..47744fcca930 100644
--- a/arch/s390/kernel/head64.S
+++ b/arch/s390/kernel/head64.S
@@ -1,7 +1,7 @@
 /*
  * arch/s390/kernel/head64.S
  *
- * (C) Copyright IBM Corp. 1999,2005
+ * Copyright (C) IBM Corp. 1999,2006
  *
  *   Author(s): Hartmut Penner <hp@de.ibm.com>
  *              Martin Schwidefsky <schwidefsky@de.ibm.com>
@@ -15,18 +15,37 @@
 # this is called either by the ipl loader or directly by PSW restart
 # or linload or SALIPL
 #
-        .org  0x10000
-startup:basr  %r13,0                     # get base
+        .org  0x10000
+startup:basr  %r13,0                     # get base
+.LPG0:  l     %r13,0f-.LPG0(%r13)
+        b     0(%r13)
+0:      .long startup_continue
+
+#
+# params at 10400 (setup.h)
+#
+        .org   PARMAREA
+        .quad  0                        # IPL_DEVICE
+        .quad  RAMDISK_ORIGIN           # INITRD_START
+        .quad  RAMDISK_SIZE             # INITRD_SIZE
+
+        .org   COMMAND_LINE
+        .byte  "root=/dev/ram0 ro"
+        .byte  0
+
+        .org   0x11000
+
+startup_continue:
+        basr  %r13,0                     # get base
 .LPG1:  sll   %r13,1                     # remove high order bit
         srl   %r13,1
-        l     %r1,.Lget_ipl_device_addr-.LPG1(%r13)
-        basr  %r14,%r1
+        GET_IPL_DEVICE
         lhi   %r1,1                      # mode 1 = esame
         slr   %r0,%r0                    # set cpuid to zero
         sigp  %r1,%r0,0x12               # switch to esame mode
         sam64                            # switch to 64 bit mode
         lctlg %c0,%c15,.Lctl-.LPG1(%r13) # load control registers
-        larl  %r12,_pstart               # pointer to parameter area
+        lg    %r12,.Lparmaddr-.LPG1(%r13)# pointer to parameter area
                                          # move IPL device to lowcore
         mvc   __LC_IPLDEV(4),IPL_DEVICE+4-PARMAREA(%r12)
 
@@ -55,8 +74,8 @@ startup:basr  %r13,0                     # get base
         larl  %r1,.Lsclph
         stg   %r1,__LC_EXT_NEW_PSW+8    # set handler
 
-        larl  %r4,_pstart               # %r4 is our index for sccb stuff
-        la    %r1,.Lsccb-PARMAREA(%r4)  # our sccb
+        larl  %r4,.Lsccb                # %r4 is our index for sccb stuff
+        lgr   %r1,%r4                   # our sccb
         .insn rre,0xb2200000,%r2,%r1    # service call
         ipm   %r1
         srl   %r1,28                    # get cc code
@@ -67,7 +86,7 @@ startup:basr  %r13,0                     # get base
         be    .Lservicecall-.LPG1(%r13)
         lpswe .Lwaitsclp-.LPG1(%r13)
 .Lsclph:
-        lh    %r1,.Lsccbr-PARMAREA(%r4)
+        lh    %r1,.Lsccbr-.Lsccb(%r4)
         chi   %r1,0x10                  # 0x0010 is the sucess code
         je    .Lprocsccb                # let's process the sccb
         chi   %r1,0x1f0
@@ -78,15 +97,15 @@ startup:basr  %r13,0                     # get base
         b     .Lservicecall-.LPG1(%r13)
 .Lprocsccb:
         lghi  %r1,0
-        icm   %r1,3,.Lscpincr1-PARMAREA(%r4) # use this one if != 0
+        icm   %r1,3,.Lscpincr1-.Lsccb(%r4) # use this one if != 0
         jnz   .Lscnd
-        lg    %r1,.Lscpincr2-PARMAREA(%r4) # otherwise use this one
+        lg    %r1,.Lscpincr2-.Lsccb(%r4) # otherwise use this one
 .Lscnd:
         xr    %r3,%r3                   # same logic
-        ic    %r3,.Lscpa1-PARMAREA(%r4)
+        ic    %r3,.Lscpa1-.Lsccb(%r4)
         chi   %r3,0x00
         jne   .Lcompmem
-        l     %r3,.Lscpa2-PARMAREA(%r4)
+        l     %r3,.Lscpa2-.Lsccb(%r4)
 .Lcompmem:
         mlgr  %r2,%r1                   # mem in MB on 128-bit
         l     %r1,.Lonemb-.LPG1(%r13)
@@ -94,8 +113,6 @@ startup:basr  %r13,0                     # get base
         b     .Lfchunk-.LPG1(%r13)
 
         .align 4
-.Lget_ipl_device_addr:
-        .long .Lget_ipl_device
 .Lpmask:
         .byte 0
         .align 8
@@ -242,29 +259,16 @@ startup:basr  %r13,0                     # get base
         .quad  0                        # cr13: home space segment table
         .quad  0xc0000000               # cr14: machine check handling off
         .quad  0                        # cr15: linkage stack operations
+.Lduct: .long 0,0,0,0,0,0,0,0
+        .long 0,0,0,0,0,0,0,0
 .Lpcmsk:.quad  0x0000000180000000
 .L4malign:.quad 0xffffffffffc00000
 .Lscan2g:.quad 0x80000000 + 0x20000 - 8 # 2GB + 128K - 8
 .Lnop:  .long  0x07000700
+.Lparmaddr:
+        .quad   PARMAREA
 
-        .org PARMAREA-64
-.Lduct: .long 0,0,0,0,0,0,0,0
-        .long 0,0,0,0,0,0,0,0
-
-#
-# params at 10400 (setup.h)
-#
-        .org   PARMAREA
-        .global _pstart
-_pstart:
-        .quad  0                        # IPL_DEVICE
-        .quad  RAMDISK_ORIGIN           # INITRD_START
-        .quad  RAMDISK_SIZE             # INITRD_SIZE
-
-        .org   COMMAND_LINE
-        .byte  "root=/dev/ram0 ro"
-        .byte  0
-        .org   0x11000
+        .align 4096
 .Lsccb:
         .hword 0x1000                   # length, one page
         .byte 0x00,0x00,0x00
@@ -281,18 +285,14 @@ _pstart:
 .Lscpincr2:
         .quad 0x00
         .fill 3984,1,0
-        .org 0x12000
-        .global _pend
-_pend:  
-
-        GET_IPL_DEVICE
+        .align 4096
 
 #ifdef CONFIG_SHARED_KERNEL
         .org   0x100000
 #endif
         
 #
-# startup-code, running in virtual mode
+# startup-code, running in absolute addressing mode
 #
         .globl _stext
 _stext: basr  %r13,0                    # get base
@@ -326,4 +326,3 @@ _stext:	basr  %r13,0                    # get base
             .align 8
 .Ldw:       .quad  0x0002000180000000,0x0000000000000000
 .Laregs:    .long  0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
-