Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 1838 insertions, 0 deletions

diff --git a/arch/ppc64/kernel/prom_init.c b/arch/ppc64/kernel/prom_init.c
new file mode 100644
index 000000000000..8dffa9ae2623
--- /dev/null
+++ b/arch/ppc64/kernel/prom_init.c
@@ -0,0 +1,1838 @@
+/*
+ * 
+ *
+ * Procedures for interfacing to Open Firmware.
+ *
+ * Paul Mackerras       August 1996.
+ * Copyright (C) 1996 Paul Mackerras.
+ * 
+ *  Adapted for 64bit PowerPC by Dave Engebretsen and Peter Bergner.
+ *    {engebret|bergner}@us.ibm.com 
+ *
+ *      This program is free software; you can redistribute it and/or
+ *      modify it under the terms of the GNU General Public License
+ *      as published by the Free Software Foundation; either version
+ *      2 of the License, or (at your option) any later version.
+ */
+
+#undef DEBUG_PROM
+
+#include <stdarg.h>
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/init.h>
+#include <linux/version.h>
+#include <linux/threads.h>
+#include <linux/spinlock.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/proc_fs.h>
+#include <linux/stringify.h>
+#include <linux/delay.h>
+#include <linux/initrd.h>
+#include <linux/bitops.h>
+#include <asm/prom.h>
+#include <asm/rtas.h>
+#include <asm/abs_addr.h>
+#include <asm/page.h>
+#include <asm/processor.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+#include <asm/smp.h>
+#include <asm/system.h>
+#include <asm/mmu.h>
+#include <asm/pgtable.h>
+#include <asm/pci.h>
+#include <asm/iommu.h>
+#include <asm/bootinfo.h>
+#include <asm/ppcdebug.h>
+#include <asm/btext.h>
+#include <asm/sections.h>
+#include <asm/machdep.h>
+
+#ifdef CONFIG_LOGO_LINUX_CLUT224
+#include <linux/linux_logo.h>
+extern const struct linux_logo logo_linux_clut224;
+#endif
+
+/*
+ * Properties whose value is longer than this get excluded from our
+ * copy of the device tree. This value does need to be big enough to
+ * ensure that we don't lose things like the interrupt-map property
+ * on a PCI-PCI bridge.
+ */
+#define MAX_PROPERTY_LENGTH     (1UL * 1024 * 1024)
+
+/*
+ * Eventually bump that one up
+ */
+#define DEVTREE_CHUNK_SIZE      0x100000
+
+/*
+ * This is the size of the local memory reserve map that gets copied
+ * into the boot params passed to the kernel. That size is totally
+ * flexible as the kernel just reads the list until it encounters an
+ * entry with size 0, so it can be changed without breaking binary
+ * compatibility
+ */
+#define MEM_RESERVE_MAP_SIZE    8
+
+/*
+ * prom_init() is called very early on, before the kernel text
+ * and data have been mapped to KERNELBASE.  At this point the code
+ * is running at whatever address it has been loaded at, so
+ * references to extern and static variables must be relocated
+ * explicitly.  The procedure reloc_offset() returns the address
+ * we're currently running at minus the address we were linked at.
+ * (Note that strings count as static variables.)
+ *
+ * Because OF may have mapped I/O devices into the area starting at
+ * KERNELBASE, particularly on CHRP machines, we can't safely call
+ * OF once the kernel has been mapped to KERNELBASE.  Therefore all
+ * OF calls should be done within prom_init(), and prom_init()
+ * and all routines called within it must be careful to relocate
+ * references as necessary.
+ *
+ * Note that the bss is cleared *after* prom_init runs, so we have
+ * to make sure that any static or extern variables it accesses
+ * are put in the data segment.
+ */
+
+
+#define PROM_BUG() do {                                         \
+        prom_printf("kernel BUG at %s line 0x%x!\n",            \
+                    RELOC(__FILE__), __LINE__);                 \
+        __asm__ __volatile__(".long " BUG_ILLEGAL_INSTR);       \
+} while (0)
+
+#ifdef DEBUG_PROM
+#define prom_debug(x...)        prom_printf(x)
+#else
+#define prom_debug(x...)
+#endif
+
+
+typedef u32 prom_arg_t;
+
+struct prom_args {
+        u32 service;
+        u32 nargs;
+        u32 nret;
+        prom_arg_t args[10];
+        prom_arg_t *rets;     /* Pointer to return values in args[16]. */
+};
+
+struct prom_t {
+        unsigned long entry;
+        ihandle root;
+        ihandle chosen;
+        int cpu;
+        ihandle stdout;
+        ihandle disp_node;
+        struct prom_args args;
+        unsigned long version;
+        unsigned long root_size_cells;
+        unsigned long root_addr_cells;
+};
+
+struct pci_reg_property {
+        struct pci_address addr;
+        u32 size_hi;
+        u32 size_lo;
+};
+
+struct mem_map_entry {
+        u64     base;
+        u64     size;
+};
+
+typedef u32 cell_t;
+
+extern void __start(unsigned long r3, unsigned long r4, unsigned long r5);
+
+extern void enter_prom(struct prom_args *args, unsigned long entry);
+extern void copy_and_flush(unsigned long dest, unsigned long src,
+                           unsigned long size, unsigned long offset);
+
+extern unsigned long klimit;
+
+/* prom structure */
+static struct prom_t __initdata prom;
+
+#define PROM_SCRATCH_SIZE 256
+
+static char __initdata of_stdout_device[256];
+static char __initdata prom_scratch[PROM_SCRATCH_SIZE];
+
+static unsigned long __initdata dt_header_start;
+static unsigned long __initdata dt_struct_start, dt_struct_end;
+static unsigned long __initdata dt_string_start, dt_string_end;
+
+static unsigned long __initdata prom_initrd_start, prom_initrd_end;
+
+static int __initdata iommu_force_on;
+static int __initdata ppc64_iommu_off;
+static int __initdata of_platform;
+
+static char __initdata prom_cmd_line[COMMAND_LINE_SIZE];
+
+static unsigned long __initdata prom_memory_limit;
+static unsigned long __initdata prom_tce_alloc_start;
+static unsigned long __initdata prom_tce_alloc_end;
+
+static unsigned long __initdata alloc_top;
+static unsigned long __initdata alloc_top_high;
+static unsigned long __initdata alloc_bottom;
+static unsigned long __initdata rmo_top;
+static unsigned long __initdata ram_top;
+
+static struct mem_map_entry __initdata mem_reserve_map[MEM_RESERVE_MAP_SIZE];
+static int __initdata mem_reserve_cnt;
+
+static cell_t __initdata regbuf[1024];
+
+
+#define MAX_CPU_THREADS 2
+
+/* TO GO */
+#ifdef CONFIG_HMT
+struct {
+        unsigned int pir;
+        unsigned int threadid;
+} hmt_thread_data[NR_CPUS];
+#endif /* CONFIG_HMT */
+
+/*
+ * This are used in calls to call_prom.  The 4th and following
+ * arguments to call_prom should be 32-bit values.  64 bit values
+ * are truncated to 32 bits (and fortunately don't get interpreted
+ * as two arguments).
+ */
+#define ADDR(x)         (u32) ((unsigned long)(x) - offset)
+
+/* This is the one and *ONLY* place where we actually call open
+ * firmware from, since we need to make sure we're running in 32b
+ * mode when we do.  We switch back to 64b mode upon return.
+ */
+
+#define PROM_ERROR      (-1)
+
+static int __init call_prom(const char *service, int nargs, int nret, ...)
+{
+        int i;
+        unsigned long offset = reloc_offset();
+        struct prom_t *_prom = PTRRELOC(&prom);
+        va_list list;
+
+        _prom->args.service = ADDR(service);
+        _prom->args.nargs = nargs;
+        _prom->args.nret = nret;
+        _prom->args.rets = (prom_arg_t *)&(_prom->args.args[nargs]);
+
+        va_start(list, nret);
+        for (i=0; i < nargs; i++)
+                _prom->args.args[i] = va_arg(list, prom_arg_t);
+        va_end(list);
+
+        for (i=0; i < nret ;i++)
+                _prom->args.rets[i] = 0;
+
+        enter_prom(&_prom->args, _prom->entry);
+
+        return (nret > 0) ? _prom->args.rets[0] : 0;
+}
+
+
+static unsigned int __init prom_claim(unsigned long virt, unsigned long size,
+                                unsigned long align)
+{
+        return (unsigned int)call_prom("claim", 3, 1,
+                                       (prom_arg_t)virt, (prom_arg_t)size,
+                                       (prom_arg_t)align);
+}
+
+static void __init prom_print(const char *msg)
+{
+        const char *p, *q;
+        unsigned long offset = reloc_offset();
+        struct prom_t *_prom = PTRRELOC(&prom);
+
+        if (_prom->stdout == 0)
+                return;
+
+        for (p = msg; *p != 0; p = q) {
+                for (q = p; *q != 0 && *q != '\n'; ++q)
+                        ;
+                if (q > p)
+                        call_prom("write", 3, 1, _prom->stdout, p, q - p);
+                if (*q == 0)
+                        break;
+                ++q;
+                call_prom("write", 3, 1, _prom->stdout, ADDR("\r\n"), 2);
+        }
+}
+
+
+static void __init prom_print_hex(unsigned long val)
+{
+        unsigned long offset = reloc_offset();
+        int i, nibbles = sizeof(val)*2;
+        char buf[sizeof(val)*2+1];
+        struct prom_t *_prom = PTRRELOC(&prom);
+
+        for (i = nibbles-1;  i >= 0;  i--) {
+                buf[i] = (val & 0xf) + '0';
+                if (buf[i] > '9')
+                        buf[i] += ('a'-'0'-10);
+                val >>= 4;
+        }
+        buf[nibbles] = '\0';
+        call_prom("write", 3, 1, _prom->stdout, buf, nibbles);
+}
+
+
+static void __init prom_printf(const char *format, ...)
+{
+        unsigned long offset = reloc_offset();
+        const char *p, *q, *s;
+        va_list args;
+        unsigned long v;
+        struct prom_t *_prom = PTRRELOC(&prom);
+
+        va_start(args, format);
+        for (p = PTRRELOC(format); *p != 0; p = q) {
+                for (q = p; *q != 0 && *q != '\n' && *q != '%'; ++q)
+                        ;
+                if (q > p)
+                        call_prom("write", 3, 1, _prom->stdout, p, q - p);
+                if (*q == 0)
+                        break;
+                if (*q == '\n') {
+                        ++q;
+                        call_prom("write", 3, 1, _prom->stdout,
+                                  ADDR("\r\n"), 2);
+                        continue;
+                }
+                ++q;
+                if (*q == 0)
+                        break;
+                switch (*q) {
+                case 's':
+                        ++q;
+                        s = va_arg(args, const char *);
+                        prom_print(s);
+                        break;
+                case 'x':
+                        ++q;
+                        v = va_arg(args, unsigned long);
+                        prom_print_hex(v);
+                        break;
+                }
+        }
+}
+
+
+static void __init __attribute__((noreturn)) prom_panic(const char *reason)
+{
+        unsigned long offset = reloc_offset();
+
+        prom_print(PTRRELOC(reason));
+        /* ToDo: should put up an SRC here */
+        call_prom("exit", 0, 0);
+
+        for (;;)                        /* should never get here */
+                ;
+}
+
+
+static int __init prom_next_node(phandle *nodep)
+{
+        phandle node;
+
+        if ((node = *nodep) != 0
+            && (*nodep = call_prom("child", 1, 1, node)) != 0)
+                return 1;
+        if ((*nodep = call_prom("peer", 1, 1, node)) != 0)
+                return 1;
+        for (;;) {
+                if ((node = call_prom("parent", 1, 1, node)) == 0)
+                        return 0;
+                if ((*nodep = call_prom("peer", 1, 1, node)) != 0)
+                        return 1;
+        }
+}
+
+static int __init prom_getprop(phandle node, const char *pname,
+                               void *value, size_t valuelen)
+{
+        unsigned long offset = reloc_offset();
+
+        return call_prom("getprop", 4, 1, node, ADDR(pname),
+                         (u32)(unsigned long) value, (u32) valuelen);
+}
+
+static int __init prom_getproplen(phandle node, const char *pname)
+{
+        unsigned long offset = reloc_offset();
+
+        return call_prom("getproplen", 2, 1, node, ADDR(pname));
+}
+
+static int __init prom_setprop(phandle node, const char *pname,
+                               void *value, size_t valuelen)
+{
+        unsigned long offset = reloc_offset();
+
+        return call_prom("setprop", 4, 1, node, ADDR(pname),
+                         (u32)(unsigned long) value, (u32) valuelen);
+}
+
+/* We can't use the standard versions because of RELOC headaches. */
+#define isxdigit(c)     (('0' <= (c) && (c) <= '9') \
+                         || ('a' <= (c) && (c) <= 'f') \
+                         || ('A' <= (c) && (c) <= 'F'))
+
+#define isdigit(c)      ('0' <= (c) && (c) <= '9')
+#define islower(c)      ('a' <= (c) && (c) <= 'z')
+#define toupper(c)      (islower(c) ? ((c) - 'a' + 'A') : (c))
+
+unsigned long prom_strtoul(const char *cp, const char **endp)
+{
+        unsigned long result = 0, base = 10, value;
+
+        if (*cp == '0') {
+                base = 8;
+                cp++;
+                if (toupper(*cp) == 'X') {
+                        cp++;
+                        base = 16;
+                }
+        }
+
+        while (isxdigit(*cp) &&
+               (value = isdigit(*cp) ? *cp - '0' : toupper(*cp) - 'A' + 10) < base) {
+                result = result * base + value;
+                cp++;
+        }
+
+        if (endp)
+                *endp = cp;
+
+        return result;
+}
+
+unsigned long prom_memparse(const char *ptr, const char **retptr)
+{
+        unsigned long ret = prom_strtoul(ptr, retptr);
+        int shift = 0;
+
+        /*
+         * We can't use a switch here because GCC *may* generate a
+         * jump table which won't work, because we're not running at
+         * the address we're linked at.
+         */
+        if ('G' == **retptr || 'g' == **retptr)
+                shift = 30;
+
+        if ('M' == **retptr || 'm' == **retptr)
+                shift = 20;
+
+        if ('K' == **retptr || 'k' == **retptr)
+                shift = 10;
+
+        if (shift) {
+                ret <<= shift;
+                (*retptr)++;
+        }
+
+        return ret;
+}
+
+/*
+ * Early parsing of the command line passed to the kernel, used for
+ * "mem=x" and the options that affect the iommu
+ */
+static void __init early_cmdline_parse(void)
+{
+        unsigned long offset = reloc_offset();
+        struct prom_t *_prom = PTRRELOC(&prom);
+        char *opt, *p;
+        int l = 0;
+
+        RELOC(prom_cmd_line[0]) = 0;
+        p = RELOC(prom_cmd_line);
+        if ((long)_prom->chosen > 0)
+                l = prom_getprop(_prom->chosen, "bootargs", p, COMMAND_LINE_SIZE-1);
+#ifdef CONFIG_CMDLINE
+        if (l == 0) /* dbl check */
+                strlcpy(RELOC(prom_cmd_line),
+                        RELOC(CONFIG_CMDLINE), sizeof(prom_cmd_line));
+#endif /* CONFIG_CMDLINE */
+        prom_printf("command line: %s\n", RELOC(prom_cmd_line));
+
+        opt = strstr(RELOC(prom_cmd_line), RELOC("iommu="));
+        if (opt) {
+                prom_printf("iommu opt is: %s\n", opt);
+                opt += 6;
+                while (*opt && *opt == ' ')
+                        opt++;
+                if (!strncmp(opt, RELOC("off"), 3))
+                        RELOC(ppc64_iommu_off) = 1;
+                else if (!strncmp(opt, RELOC("force"), 5))
+                        RELOC(iommu_force_on) = 1;
+        }
+
+        opt = strstr(RELOC(prom_cmd_line), RELOC("mem="));
+        if (opt) {
+                opt += 4;
+                RELOC(prom_memory_limit) = prom_memparse(opt, (const char **)&opt);
+                /* Align to 16 MB == size of large page */
+                RELOC(prom_memory_limit) = ALIGN(RELOC(prom_memory_limit), 0x1000000);
+        }
+}
+
+/*
+ * Memory allocation strategy... our layout is normally:
+ *
+ *  at 14Mb or more we vmlinux, then a gap and initrd. In some rare cases, initrd
+ *  might end up beeing before the kernel though. We assume this won't override
+ *  the final kernel at 0, we have no provision to handle that in this version,
+ *  but it should hopefully never happen.
+ *
+ *  alloc_top is set to the top of RMO, eventually shrink down if the TCEs overlap
+ *  alloc_bottom is set to the top of kernel/initrd
+ *
+ *  from there, allocations are done that way : rtas is allocated topmost, and
+ *  the device-tree is allocated from the bottom. We try to grow the device-tree
+ *  allocation as we progress. If we can't, then we fail, we don't currently have
+ *  a facility to restart elsewhere, but that shouldn't be necessary neither
+ *
+ *  Note that calls to reserve_mem have to be done explicitely, memory allocated
+ *  with either alloc_up or alloc_down isn't automatically reserved.
+ */
+
+
+/*
+ * Allocates memory in the RMO upward from the kernel/initrd
+ *
+ * When align is 0, this is a special case, it means to allocate in place
+ * at the current location of alloc_bottom or fail (that is basically
+ * extending the previous allocation). Used for the device-tree flattening
+ */
+static unsigned long __init alloc_up(unsigned long size, unsigned long align)
+{
+        unsigned long offset = reloc_offset();
+        unsigned long base = _ALIGN_UP(RELOC(alloc_bottom), align);
+        unsigned long addr = 0;
+
+        prom_debug("alloc_up(%x, %x)\n", size, align);
+        if (RELOC(ram_top) == 0)
+                prom_panic("alloc_up() called with mem not initialized\n");
+
+        if (align)
+                base = _ALIGN_UP(RELOC(alloc_bottom), align);
+        else
+                base = RELOC(alloc_bottom);
+
+        for(; (base + size) <= RELOC(alloc_top); 
+            base = _ALIGN_UP(base + 0x100000, align)) {
+                prom_debug("    trying: 0x%x\n\r", base);
+                addr = (unsigned long)prom_claim(base, size, 0);
+                if ((int)addr != PROM_ERROR)
+                        break;
+                addr = 0;
+                if (align == 0)
+                        break;
+        }
+        if (addr == 0)
+                return 0;
+        RELOC(alloc_bottom) = addr;
+
+        prom_debug(" -> %x\n", addr);
+        prom_debug("  alloc_bottom : %x\n", RELOC(alloc_bottom));
+        prom_debug("  alloc_top    : %x\n", RELOC(alloc_top));
+        prom_debug("  alloc_top_hi : %x\n", RELOC(alloc_top_high));
+        prom_debug("  rmo_top      : %x\n", RELOC(rmo_top));
+        prom_debug("  ram_top      : %x\n", RELOC(ram_top));
+
+        return addr;
+}
+
+/*
+ * Allocates memory downard, either from top of RMO, or if highmem
+ * is set, from the top of RAM. Note that this one doesn't handle
+ * failures. In does claim memory if highmem is not set.
+ */
+static unsigned long __init alloc_down(unsigned long size, unsigned long align,
+                                       int highmem)
+{
+        unsigned long offset = reloc_offset();
+        unsigned long base, addr = 0;
+
+        prom_debug("alloc_down(%x, %x, %s)\n", size, align,
+                   highmem ? RELOC("(high)") : RELOC("(low)"));
+        if (RELOC(ram_top) == 0)
+                prom_panic("alloc_down() called with mem not initialized\n");
+
+        if (highmem) {
+                /* Carve out storage for the TCE table. */
+                addr = _ALIGN_DOWN(RELOC(alloc_top_high) - size, align);
+                if (addr <= RELOC(alloc_bottom))
+                        return 0;
+                else {
+                        /* Will we bump into the RMO ? If yes, check out that we
+                         * didn't overlap existing allocations there, if we did,
+                         * we are dead, we must be the first in town !
+                         */
+                        if (addr < RELOC(rmo_top)) {
+                                /* Good, we are first */
+                                if (RELOC(alloc_top) == RELOC(rmo_top))
+                                        RELOC(alloc_top) = RELOC(rmo_top) = addr;
+                                else
+                                        return 0;
+                        }
+                        RELOC(alloc_top_high) = addr;
+                }
+                goto bail;
+        }
+
+        base = _ALIGN_DOWN(RELOC(alloc_top) - size, align);
+        for(; base > RELOC(alloc_bottom); base = _ALIGN_DOWN(base - 0x100000, align))  {
+                prom_debug("    trying: 0x%x\n\r", base);
+                addr = (unsigned long)prom_claim(base, size, 0);
+                if ((int)addr != PROM_ERROR)
+                        break;
+                addr = 0;
+        }
+        if (addr == 0)
+                return 0;
+        RELOC(alloc_top) = addr;
+
+ bail:
+        prom_debug(" -> %x\n", addr);
+        prom_debug("  alloc_bottom : %x\n", RELOC(alloc_bottom));
+        prom_debug("  alloc_top    : %x\n", RELOC(alloc_top));
+        prom_debug("  alloc_top_hi : %x\n", RELOC(alloc_top_high));
+        prom_debug("  rmo_top      : %x\n", RELOC(rmo_top));
+        prom_debug("  ram_top      : %x\n", RELOC(ram_top));
+
+        return addr;
+}
+
+/*
+ * Parse a "reg" cell
+ */
+static unsigned long __init prom_next_cell(int s, cell_t **cellp)
+{
+        cell_t *p = *cellp;
+        unsigned long r = 0;
+
+        /* Ignore more than 2 cells */
+        while (s > 2) {
+                p++;
+                s--;
+        }
+        while (s) {
+                r <<= 32;
+                r |= *(p++);
+                s--;
+        }
+
+        *cellp = p;
+        return r;
+}
+
+/*
+ * Very dumb function for adding to the memory reserve list, but
+ * we don't need anything smarter at this point
+ *
+ * XXX Eventually check for collisions. They should NEVER happen
+ * if problems seem to show up, it would be a good start to track
+ * them down.
+ */
+static void reserve_mem(unsigned long base, unsigned long size)
+{
+        unsigned long offset = reloc_offset();
+        unsigned long top = base + size;
+        unsigned long cnt = RELOC(mem_reserve_cnt);
+
+        if (size == 0)
+                return;
+
+        /* We need to always keep one empty entry so that we
+         * have our terminator with "size" set to 0 since we are
+         * dumb and just copy this entire array to the boot params
+         */
+        base = _ALIGN_DOWN(base, PAGE_SIZE);
+        top = _ALIGN_UP(top, PAGE_SIZE);
+        size = top - base;
+
+        if (cnt >= (MEM_RESERVE_MAP_SIZE - 1))
+                prom_panic("Memory reserve map exhausted !\n");
+        RELOC(mem_reserve_map)[cnt].base = base;
+        RELOC(mem_reserve_map)[cnt].size = size;
+        RELOC(mem_reserve_cnt) = cnt + 1;
+}
+
+/*
+ * Initialize memory allocation mecanism, parse "memory" nodes and
+ * obtain that way the top of memory and RMO to setup out local allocator
+ */
+static void __init prom_init_mem(void)
+{
+        phandle node;
+        char *path, type[64];
+        unsigned int plen;
+        cell_t *p, *endp;
+        unsigned long offset = reloc_offset();
+        struct prom_t *_prom = PTRRELOC(&prom);
+
+        /*
+         * We iterate the memory nodes to find
+         * 1) top of RMO (first node)
+         * 2) top of memory
+         */
+        prom_debug("root_addr_cells: %x\n", (long)_prom->root_addr_cells);
+        prom_debug("root_size_cells: %x\n", (long)_prom->root_size_cells);
+
+        prom_debug("scanning memory:\n");
+        path = RELOC(prom_scratch);
+
+        for (node = 0; prom_next_node(&node); ) {
+                type[0] = 0;
+                prom_getprop(node, "device_type", type, sizeof(type));
+
+                if (strcmp(type, RELOC("memory")))
+                        continue;
+        
+                plen = prom_getprop(node, "reg", RELOC(regbuf), sizeof(regbuf));
+                if (plen > sizeof(regbuf)) {
+                        prom_printf("memory node too large for buffer !\n");
+                        plen = sizeof(regbuf);
+                }
+                p = RELOC(regbuf);
+                endp = p + (plen / sizeof(cell_t));
+
+#ifdef DEBUG_PROM
+                memset(path, 0, PROM_SCRATCH_SIZE);
+                call_prom("package-to-path", 3, 1, node, path, PROM_SCRATCH_SIZE-1);
+                prom_debug("  node %s :\n", path);
+#endif /* DEBUG_PROM */
+
+                while ((endp - p) >= (_prom->root_addr_cells + _prom->root_size_cells)) {
+                        unsigned long base, size;
+
+                        base = prom_next_cell(_prom->root_addr_cells, &p);
+                        size = prom_next_cell(_prom->root_size_cells, &p);
+
+                        if (size == 0)
+                                continue;
+                        prom_debug("    %x %x\n", base, size);
+                        if (base == 0)
+                                RELOC(rmo_top) = size;
+                        if ((base + size) > RELOC(ram_top))
+                                RELOC(ram_top) = base + size;
+                }
+        }
+
+        RELOC(alloc_bottom) = PAGE_ALIGN(RELOC(klimit) - offset + 0x4000);
+
+        /* Check if we have an initrd after the kernel, if we do move our bottom
+         * point to after it
+         */
+        if (RELOC(prom_initrd_start)) {
+                if (RELOC(prom_initrd_end) > RELOC(alloc_bottom))
+                        RELOC(alloc_bottom) = PAGE_ALIGN(RELOC(prom_initrd_end));
+        }
+
+        /*
+         * If prom_memory_limit is set we reduce the upper limits *except* for
+         * alloc_top_high. This must be the real top of RAM so we can put
+         * TCE's up there.
+         */
+
+        RELOC(alloc_top_high) = RELOC(ram_top);
+
+        if (RELOC(prom_memory_limit)) {
+                if (RELOC(prom_memory_limit) <= RELOC(alloc_bottom)) {
+                        prom_printf("Ignoring mem=%x <= alloc_bottom.\n",
+                                RELOC(prom_memory_limit));
+                        RELOC(prom_memory_limit) = 0;
+                } else if (RELOC(prom_memory_limit) >= RELOC(ram_top)) {
+                        prom_printf("Ignoring mem=%x >= ram_top.\n",
+                                RELOC(prom_memory_limit));
+                        RELOC(prom_memory_limit) = 0;
+                } else {
+                        RELOC(ram_top) = RELOC(prom_memory_limit);
+                        RELOC(rmo_top) = min(RELOC(rmo_top), RELOC(prom_memory_limit));
+                }
+        }
+
+        /*
+         * Setup our top alloc point, that is top of RMO or top of
+         * segment 0 when running non-LPAR.
+         */
+        if ( RELOC(of_platform) == PLATFORM_PSERIES_LPAR )
+                RELOC(alloc_top) = RELOC(rmo_top);
+        else
+                RELOC(alloc_top) = RELOC(rmo_top) = min(0x40000000ul, RELOC(ram_top));
+
+        prom_printf("memory layout at init:\n");
+        prom_printf("  memory_limit : %x (16 MB aligned)\n", RELOC(prom_memory_limit));
+        prom_printf("  alloc_bottom : %x\n", RELOC(alloc_bottom));
+        prom_printf("  alloc_top    : %x\n", RELOC(alloc_top));
+        prom_printf("  alloc_top_hi : %x\n", RELOC(alloc_top_high));
+        prom_printf("  rmo_top      : %x\n", RELOC(rmo_top));
+        prom_printf("  ram_top      : %x\n", RELOC(ram_top));
+}
+
+
+/*
+ * Allocate room for and instanciate RTAS
+ */
+static void __init prom_instantiate_rtas(void)
+{
+        unsigned long offset = reloc_offset();
+        struct prom_t *_prom = PTRRELOC(&prom);
+        phandle prom_rtas, rtas_node;
+        u32 base, entry = 0;
+        u32 size = 0;
+
+        prom_debug("prom_instantiate_rtas: start...\n");
+
+        prom_rtas = call_prom("finddevice", 1, 1, ADDR("/rtas"));
+        prom_debug("prom_rtas: %x\n", prom_rtas);
+        if (prom_rtas == (phandle) -1)
+                return;
+
+        prom_getprop(prom_rtas, "rtas-size", &size, sizeof(size));
+        if (size == 0)
+                return;
+
+        base = alloc_down(size, PAGE_SIZE, 0);
+        if (base == 0) {
+                prom_printf("RTAS allocation failed !\n");
+                return;
+        }
+        prom_printf("instantiating rtas at 0x%x", base);
+
+        rtas_node = call_prom("open", 1, 1, ADDR("/rtas"));
+        prom_printf("...");
+
+        if (call_prom("call-method", 3, 2,
+                      ADDR("instantiate-rtas"),
+                      rtas_node, base) != PROM_ERROR) {
+                entry = (long)_prom->args.rets[1];
+        }
+        if (entry == 0) {
+                prom_printf(" failed\n");
+                return;
+        }
+        prom_printf(" done\n");
+
+        reserve_mem(base, size);
+
+        prom_setprop(prom_rtas, "linux,rtas-base", &base, sizeof(base));
+        prom_setprop(prom_rtas, "linux,rtas-entry", &entry, sizeof(entry));
+
+        prom_debug("rtas base     = 0x%x\n", base);
+        prom_debug("rtas entry    = 0x%x\n", entry);
+        prom_debug("rtas size     = 0x%x\n", (long)size);
+
+        prom_debug("prom_instantiate_rtas: end...\n");
+}
+
+
+/*
+ * Allocate room for and initialize TCE tables
+ */
+static void __init prom_initialize_tce_table(void)
+{
+        phandle node;
+        ihandle phb_node;
+        unsigned long offset = reloc_offset();
+        char compatible[64], type[64], model[64];
+        char *path = RELOC(prom_scratch);
+        u64 base, align;
+        u32 minalign, minsize;
+        u64 tce_entry, *tce_entryp;
+        u64 local_alloc_top, local_alloc_bottom;
+        u64 i;
+
+        if (RELOC(ppc64_iommu_off))
+                return;
+
+        prom_debug("starting prom_initialize_tce_table\n");
+
+        /* Cache current top of allocs so we reserve a single block */
+        local_alloc_top = RELOC(alloc_top_high);
+        local_alloc_bottom = local_alloc_top;
+
+        /* Search all nodes looking for PHBs. */
+        for (node = 0; prom_next_node(&node); ) {
+                compatible[0] = 0;
+                type[0] = 0;
+                model[0] = 0;
+                prom_getprop(node, "compatible",
+                             compatible, sizeof(compatible));
+                prom_getprop(node, "device_type", type, sizeof(type));
+                prom_getprop(node, "model", model, sizeof(model));
+
+                if ((type[0] == 0) || (strstr(type, RELOC("pci")) == NULL))
+                        continue;
+
+                /* Keep the old logic in tack to avoid regression. */
+                if (compatible[0] != 0) {
+                        if ((strstr(compatible, RELOC("python")) == NULL) &&
+                            (strstr(compatible, RELOC("Speedwagon")) == NULL) &&
+                            (strstr(compatible, RELOC("Winnipeg")) == NULL))
+                                continue;
+                } else if (model[0] != 0) {
+                        if ((strstr(model, RELOC("ython")) == NULL) &&
+                            (strstr(model, RELOC("peedwagon")) == NULL) &&
+                            (strstr(model, RELOC("innipeg")) == NULL))
+                                continue;
+                }
+
+                if (prom_getprop(node, "tce-table-minalign", &minalign,
+                                 sizeof(minalign)) == PROM_ERROR)
+                        minalign = 0;
+                if (prom_getprop(node, "tce-table-minsize", &minsize,
+                                 sizeof(minsize)) == PROM_ERROR)
+                        minsize = 4UL << 20;
+
+                /*
+                 * Even though we read what OF wants, we just set the table
+                 * size to 4 MB.  This is enough to map 2GB of PCI DMA space.
+                 * By doing this, we avoid the pitfalls of trying to DMA to
+                 * MMIO space and the DMA alias hole.
+                 *
+                 * On POWER4, firmware sets the TCE region by assuming
+                 * each TCE table is 8MB. Using this memory for anything
+                 * else will impact performance, so we always allocate 8MB.
+                 * Anton
+                 */
+                if (__is_processor(PV_POWER4) || __is_processor(PV_POWER4p))
+                        minsize = 8UL << 20;
+                else
+                        minsize = 4UL << 20;
+
+                /* Align to the greater of the align or size */
+                align = max(minalign, minsize);
+                base = alloc_down(minsize, align, 1);
+                if (base == 0)
+                        prom_panic("ERROR, cannot find space for TCE table.\n");
+                if (base < local_alloc_bottom)
+                        local_alloc_bottom = base;
+
+                /* Save away the TCE table attributes for later use. */
+                prom_setprop(node, "linux,tce-base", &base, sizeof(base));
+                prom_setprop(node, "linux,tce-size", &minsize, sizeof(minsize));
+
+                /* It seems OF doesn't null-terminate the path :-( */
+                memset(path, 0, sizeof(path));
+                /* Call OF to setup the TCE hardware */
+                if (call_prom("package-to-path", 3, 1, node,
+                              path, PROM_SCRATCH_SIZE-1) == PROM_ERROR) {
+                        prom_printf("package-to-path failed\n");
+                }
+
+                prom_debug("TCE table: %s\n", path);
+                prom_debug("\tnode = 0x%x\n", node);
+                prom_debug("\tbase = 0x%x\n", base);
+                prom_debug("\tsize = 0x%x\n", minsize);
+
+                /* Initialize the table to have a one-to-one mapping
+                 * over the allocated size.
+                 */
+                tce_entryp = (unsigned long *)base;
+                for (i = 0; i < (minsize >> 3) ;tce_entryp++, i++) {
+                        tce_entry = (i << PAGE_SHIFT);
+                        tce_entry |= 0x3;
+                        *tce_entryp = tce_entry;
+                }
+
+                prom_printf("opening PHB %s", path);
+                phb_node = call_prom("open", 1, 1, path);
+                if ( (long)phb_node <= 0)
+                        prom_printf("... failed\n");
+                else
+                        prom_printf("... done\n");
+
+                call_prom("call-method", 6, 0, ADDR("set-64-bit-addressing"),
+                          phb_node, -1, minsize,
+                          (u32) base, (u32) (base >> 32));
+                call_prom("close", 1, 0, phb_node);
+        }
+
+        reserve_mem(local_alloc_bottom, local_alloc_top - local_alloc_bottom);
+
+        if (RELOC(prom_memory_limit)) {
+                /*
+                 * We align the start to a 16MB boundary so we can map the TCE area
+                 * using large pages if possible. The end should be the top of RAM
+                 * so no need to align it.
+                 */
+                RELOC(prom_tce_alloc_start) = _ALIGN_DOWN(local_alloc_bottom, 0x1000000);
+                RELOC(prom_tce_alloc_end) = local_alloc_top;
+        }
+
+        /* Flag the first invalid entry */
+        prom_debug("ending prom_initialize_tce_table\n");
+}
+
+/*
+ * With CHRP SMP we need to use the OF to start the other
+ * processors so we can't wait until smp_boot_cpus (the OF is
+ * trashed by then) so we have to put the processors into
+ * a holding pattern controlled by the kernel (not OF) before
+ * we destroy the OF.
+ *
+ * This uses a chunk of low memory, puts some holding pattern
+ * code there and sends the other processors off to there until
+ * smp_boot_cpus tells them to do something.  The holding pattern
+ * checks that address until its cpu # is there, when it is that
+ * cpu jumps to __secondary_start().  smp_boot_cpus() takes care
+ * of setting those values.
+ *
+ * We also use physical address 0x4 here to tell when a cpu
+ * is in its holding pattern code.
+ *
+ * Fixup comment... DRENG / PPPBBB - Peter
+ *
+ * -- Cort
+ */
+static void __init prom_hold_cpus(void)
+{
+        unsigned long i;
+        unsigned int reg;
+        phandle node;
+        unsigned long offset = reloc_offset();
+        char type[64];
+        int cpuid = 0;
+        unsigned int interrupt_server[MAX_CPU_THREADS];
+        unsigned int cpu_threads, hw_cpu_num;
+        int propsize;
+        extern void __secondary_hold(void);
+        extern unsigned long __secondary_hold_spinloop;
+        extern unsigned long __secondary_hold_acknowledge;
+        unsigned long *spinloop
+                = (void *)virt_to_abs(&__secondary_hold_spinloop);
+        unsigned long *acknowledge
+                = (void *)virt_to_abs(&__secondary_hold_acknowledge);
+        unsigned long secondary_hold
+                = virt_to_abs(*PTRRELOC((unsigned long *)__secondary_hold));
+        struct prom_t *_prom = PTRRELOC(&prom);
+
+        prom_debug("prom_hold_cpus: start...\n");
+        prom_debug("    1) spinloop       = 0x%x\n", (unsigned long)spinloop);
+        prom_debug("    1) *spinloop      = 0x%x\n", *spinloop);
+        prom_debug("    1) acknowledge    = 0x%x\n",
+                   (unsigned long)acknowledge);
+        prom_debug("    1) *acknowledge   = 0x%x\n", *acknowledge);
+        prom_debug("    1) secondary_hold = 0x%x\n", secondary_hold);
+
+        /* Set the common spinloop variable, so all of the secondary cpus
+         * will block when they are awakened from their OF spinloop.
+         * This must occur for both SMP and non SMP kernels, since OF will
+         * be trashed when we move the kernel.
+         */
+        *spinloop = 0;
+
+#ifdef CONFIG_HMT
+        for (i=0; i < NR_CPUS; i++) {
+                RELOC(hmt_thread_data)[i].pir = 0xdeadbeef;
+        }
+#endif
+        /* look for cpus */
+        for (node = 0; prom_next_node(&node); ) {
+                type[0] = 0;
+                prom_getprop(node, "device_type", type, sizeof(type));
+                if (strcmp(type, RELOC("cpu")) != 0)
+                        continue;
+
+                /* Skip non-configured cpus. */
+                if (prom_getprop(node, "status", type, sizeof(type)) > 0)
+                        if (strcmp(type, RELOC("okay")) != 0)
+                                continue;
+
+                reg = -1;
+                prom_getprop(node, "reg", &reg, sizeof(reg));
+
+                prom_debug("\ncpuid        = 0x%x\n", cpuid);
+                prom_debug("cpu hw idx   = 0x%x\n", reg);
+
+                /* Init the acknowledge var which will be reset by
+                 * the secondary cpu when it awakens from its OF
+                 * spinloop.
+                 */
+                *acknowledge = (unsigned long)-1;
+
+                propsize = prom_getprop(node, "ibm,ppc-interrupt-server#s",
+                                        &interrupt_server,
+                                        sizeof(interrupt_server));
+                if (propsize < 0) {
+                        /* no property.  old hardware has no SMT */
+                        cpu_threads = 1;
+                        interrupt_server[0] = reg; /* fake it with phys id */
+                } else {
+                        /* We have a threaded processor */
+                        cpu_threads = propsize / sizeof(u32);
+                        if (cpu_threads > MAX_CPU_THREADS) {
+                                prom_printf("SMT: too many threads!\n"
+                                            "SMT: found %x, max is %x\n",
+                                            cpu_threads, MAX_CPU_THREADS);
+                                cpu_threads = 1; /* ToDo: panic? */
+                        }
+                }
+
+                hw_cpu_num = interrupt_server[0];
+                if (hw_cpu_num != _prom->cpu) {
+                        /* Primary Thread of non-boot cpu */
+                        prom_printf("%x : starting cpu hw idx %x... ", cpuid, reg);
+                        call_prom("start-cpu", 3, 0, node,
+                                  secondary_hold, reg);
+
+                        for ( i = 0 ; (i < 100000000) && 
+                              (*acknowledge == ((unsigned long)-1)); i++ )
+                                mb();
+
+                        if (*acknowledge == reg) {
+                                prom_printf("done\n");
+                                /* We have to get every CPU out of OF,
+                                 * even if we never start it. */
+                                if (cpuid >= NR_CPUS)
+                                        goto next;
+                        } else {
+                                prom_printf("failed: %x\n", *acknowledge);
+                        }
+                }
+#ifdef CONFIG_SMP
+                else
+                        prom_printf("%x : boot cpu     %x\n", cpuid, reg);
+#endif
+next:
+#ifdef CONFIG_SMP
+                /* Init paca for secondary threads.   They start later. */
+                for (i=1; i < cpu_threads; i++) {
+                        cpuid++;
+                        if (cpuid >= NR_CPUS)
+                                continue;
+                }
+#endif /* CONFIG_SMP */
+                cpuid++;
+        }
+#ifdef CONFIG_HMT
+        /* Only enable HMT on processors that provide support. */
+        if (__is_processor(PV_PULSAR) || 
+            __is_processor(PV_ICESTAR) ||
+            __is_processor(PV_SSTAR)) {
+                prom_printf("    starting secondary threads\n");
+
+                for (i = 0; i < NR_CPUS; i += 2) {
+                        if (!cpu_online(i))
+                                continue;
+
+                        if (i == 0) {
+                                unsigned long pir = mfspr(SPRN_PIR);
+                                if (__is_processor(PV_PULSAR)) {
+                                        RELOC(hmt_thread_data)[i].pir = 
+                                                pir & 0x1f;
+                                } else {
+                                        RELOC(hmt_thread_data)[i].pir = 
+                                                pir & 0x3ff;
+                                }
+                        }
+                }
+        } else {
+                prom_printf("Processor is not HMT capable\n");
+        }
+#endif
+
+        if (cpuid > NR_CPUS)
+                prom_printf("WARNING: maximum CPUs (" __stringify(NR_CPUS)
+                            ") exceeded: ignoring extras\n");
+
+        prom_debug("prom_hold_cpus: end...\n");
+}
+
+
+static void __init prom_init_client_services(unsigned long pp)
+{
+        unsigned long offset = reloc_offset();
+        struct prom_t *_prom = PTRRELOC(&prom);
+
+        /* Get a handle to the prom entry point before anything else */
+        _prom->entry = pp;
+
+        /* Init default value for phys size */
+        _prom->root_size_cells = 1;
+        _prom->root_addr_cells = 2;
+
+        /* get a handle for the stdout device */
+        _prom->chosen = call_prom("finddevice", 1, 1, ADDR("/chosen"));
+        if ((long)_prom->chosen <= 0)
+                prom_panic("cannot find chosen"); /* msg won't be printed :( */
+
+        /* get device tree root */
+        _prom->root = call_prom("finddevice", 1, 1, ADDR("/"));
+        if ((long)_prom->root <= 0)
+                prom_panic("cannot find device tree root"); /* msg won't be printed :( */
+}
+
+static void __init prom_init_stdout(void)
+{
+        unsigned long offset = reloc_offset();
+        struct prom_t *_prom = PTRRELOC(&prom);
+        char *path = RELOC(of_stdout_device);
+        char type[16];
+        u32 val;
+
+        if (prom_getprop(_prom->chosen, "stdout", &val, sizeof(val)) <= 0)
+                prom_panic("cannot find stdout");
+
+        _prom->stdout = val;
+
+        /* Get the full OF pathname of the stdout device */
+        memset(path, 0, 256);
+        call_prom("instance-to-path", 3, 1, _prom->stdout, path, 255);
+        val = call_prom("instance-to-package", 1, 1, _prom->stdout);
+        prom_setprop(_prom->chosen, "linux,stdout-package", &val, sizeof(val));
+        prom_printf("OF stdout device is: %s\n", RELOC(of_stdout_device));
+        prom_setprop(_prom->chosen, "linux,stdout-path",
+                     RELOC(of_stdout_device), strlen(RELOC(of_stdout_device))+1);
+
+        /* If it's a display, note it */
+        memset(type, 0, sizeof(type));
+        prom_getprop(val, "device_type", type, sizeof(type));
+        if (strcmp(type, RELOC("display")) == 0) {
+                _prom->disp_node = val;
+                prom_setprop(val, "linux,boot-display", NULL, 0);
+        }
+}
+
+static void __init prom_close_stdin(void)
+{
+        unsigned long offset = reloc_offset();
+        struct prom_t *_prom = PTRRELOC(&prom);
+        ihandle val;
+
+        if (prom_getprop(_prom->chosen, "stdin", &val, sizeof(val)) > 0)
+                call_prom("close", 1, 0, val);
+}
+
+static int __init prom_find_machine_type(void)
+{
+        unsigned long offset = reloc_offset();
+        struct prom_t *_prom = PTRRELOC(&prom);
+        char compat[256];
+        int len, i = 0;
+        phandle rtas;
+
+        len = prom_getprop(_prom->root, "compatible",
+                           compat, sizeof(compat)-1);
+        if (len > 0) {
+                compat[len] = 0;
+                while (i < len) {
+                        char *p = &compat[i];
+                        int sl = strlen(p);
+                        if (sl == 0)
+                                break;
+                        if (strstr(p, RELOC("Power Macintosh")) ||
+                            strstr(p, RELOC("MacRISC4")))
+                                return PLATFORM_POWERMAC;
+                        if (strstr(p, RELOC("Momentum,Maple")))
+                                return PLATFORM_MAPLE;
+                        i += sl + 1;
+                }
+        }
+        /* Default to pSeries. We need to know if we are running LPAR */
+        rtas = call_prom("finddevice", 1, 1, ADDR("/rtas"));
+        if (rtas != (phandle) -1) {
+                unsigned long x;
+                x = prom_getproplen(rtas, "ibm,hypertas-functions");
+                if (x != PROM_ERROR) {
+                        prom_printf("Hypertas detected, assuming LPAR !\n");
+                        return PLATFORM_PSERIES_LPAR;
+                }
+        }
+        return PLATFORM_PSERIES;
+}
+
+static int __init prom_set_color(ihandle ih, int i, int r, int g, int b)
+{
+        unsigned long offset = reloc_offset();
+
+        return call_prom("call-method", 6, 1, ADDR("color!"), ih, i, b, g, r);
+}
+
+/*
+ * If we have a display that we don't know how to drive,
+ * we will want to try to execute OF's open method for it
+ * later.  However, OF will probably fall over if we do that
+ * we've taken over the MMU.
+ * So we check whether we will need to open the display,
+ * and if so, open it now.
+ */
+static void __init prom_check_displays(void)
+{
+        unsigned long offset = reloc_offset();
+        struct prom_t *_prom = PTRRELOC(&prom);
+        char type[16], *path;
+        phandle node;
+        ihandle ih;
+        int i;
+
+        static unsigned char default_colors[] = {
+                0x00, 0x00, 0x00,
+                0x00, 0x00, 0xaa,
+                0x00, 0xaa, 0x00,
+                0x00, 0xaa, 0xaa,
+                0xaa, 0x00, 0x00,
+                0xaa, 0x00, 0xaa,
+                0xaa, 0xaa, 0x00,
+                0xaa, 0xaa, 0xaa,
+                0x55, 0x55, 0x55,
+                0x55, 0x55, 0xff,
+                0x55, 0xff, 0x55,
+                0x55, 0xff, 0xff,
+                0xff, 0x55, 0x55,
+                0xff, 0x55, 0xff,
+                0xff, 0xff, 0x55,
+                0xff, 0xff, 0xff
+        };
+        const unsigned char *clut;
+
+        prom_printf("Looking for displays\n");
+        for (node = 0; prom_next_node(&node); ) {
+                memset(type, 0, sizeof(type));
+                prom_getprop(node, "device_type", type, sizeof(type));
+                if (strcmp(type, RELOC("display")) != 0)
+                        continue;
+
+                /* It seems OF doesn't null-terminate the path :-( */
+                path = RELOC(prom_scratch);
+                memset(path, 0, PROM_SCRATCH_SIZE);
+
+                /*
+                 * leave some room at the end of the path for appending extra
+                 * arguments
+                 */
+                if (call_prom("package-to-path", 3, 1, node, path, PROM_SCRATCH_SIZE-10) < 0)
+                        continue;
+                prom_printf("found display   : %s, opening ... ", path);
+                
+                ih = call_prom("open", 1, 1, path);
+                if (ih == (ihandle)0 || ih == (ihandle)-1) {
+                        prom_printf("failed\n");
+                        continue;
+                }
+
+                /* Success */
+                prom_printf("done\n");
+                prom_setprop(node, "linux,opened", NULL, 0);
+
+                /*
+                 * stdout wasn't a display node, pick the first we can find
+                 * for btext
+                 */
+                if (_prom->disp_node == 0)
+                        _prom->disp_node = node;
+
+                /* Setup a useable color table when the appropriate
+                 * method is available. Should update this to set-colors */
+                clut = RELOC(default_colors);
+                for (i = 0; i < 32; i++, clut += 3)
+                        if (prom_set_color(ih, i, clut[0], clut[1],
+                                           clut[2]) != 0)
+                                break;
+
+#ifdef CONFIG_LOGO_LINUX_CLUT224
+                clut = PTRRELOC(RELOC(logo_linux_clut224.clut));
+                for (i = 0; i < RELOC(logo_linux_clut224.clutsize); i++, clut += 3)
+                        if (prom_set_color(ih, i + 32, clut[0], clut[1],
+                                           clut[2]) != 0)
+                                break;
+#endif /* CONFIG_LOGO_LINUX_CLUT224 */
+        }
+}
+
+
+/* Return (relocated) pointer to this much memory: moves initrd if reqd. */
+static void __init *make_room(unsigned long *mem_start, unsigned long *mem_end,
+                              unsigned long needed, unsigned long align)
+{
+        unsigned long offset = reloc_offset();
+        void *ret;
+
+        *mem_start = _ALIGN(*mem_start, align);
+        while ((*mem_start + needed) > *mem_end) {
+                unsigned long room, chunk;
+
+                prom_debug("Chunk exhausted, claiming more at %x...\n",
+                           RELOC(alloc_bottom));
+                room = RELOC(alloc_top) - RELOC(alloc_bottom);
+                if (room > DEVTREE_CHUNK_SIZE)
+                        room = DEVTREE_CHUNK_SIZE;
+                if (room < PAGE_SIZE)
+                        prom_panic("No memory for flatten_device_tree (no room)");
+                chunk = alloc_up(room, 0);
+                if (chunk == 0)
+                        prom_panic("No memory for flatten_device_tree (claim failed)");
+                *mem_end = RELOC(alloc_top);
+        }
+
+        ret = (void *)*mem_start;
+        *mem_start += needed;
+
+        return ret;
+}
+
+#define dt_push_token(token, mem_start, mem_end) \
+        do { *((u32 *)make_room(mem_start, mem_end, 4, 4)) = token; } while(0)
+
+static unsigned long __init dt_find_string(char *str)
+{
+        unsigned long offset = reloc_offset();
+        char *s, *os;
+
+        s = os = (char *)RELOC(dt_string_start);
+        s += 4;
+        while (s <  (char *)RELOC(dt_string_end)) {
+                if (strcmp(s, str) == 0)
+                        return s - os;
+                s += strlen(s) + 1;
+        }
+        return 0;
+}
+
+static void __init scan_dt_build_strings(phandle node, unsigned long *mem_start,
+                                         unsigned long *mem_end)
+{
+        unsigned long offset = reloc_offset();
+        char *prev_name, *namep, *sstart;
+        unsigned long soff;
+        phandle child;
+
+        sstart =  (char *)RELOC(dt_string_start);
+
+        /* get and store all property names */
+        prev_name = RELOC("");
+        for (;;) {
+                
+                /* 32 is max len of name including nul. */
+                namep = make_room(mem_start, mem_end, 32, 1);
+                if (call_prom("nextprop", 3, 1, node, prev_name, namep) <= 0) {
+                        /* No more nodes: unwind alloc */
+                        *mem_start = (unsigned long)namep;
+                        break;
+                }
+                soff = dt_find_string(namep);
+                if (soff != 0) {
+                        *mem_start = (unsigned long)namep;
+                        namep = sstart + soff;
+                } else {
+                        /* Trim off some if we can */
+                        *mem_start = (unsigned long)namep + strlen(namep) + 1;
+                        RELOC(dt_string_end) = *mem_start;
+                }
+                prev_name = namep;
+        }
+
+        /* do all our children */
+        child = call_prom("child", 1, 1, node);
+        while (child != (phandle)0) {
+                scan_dt_build_strings(child, mem_start, mem_end);
+                child = call_prom("peer", 1, 1, child);
+        }
+}
+
+static void __init scan_dt_build_struct(phandle node, unsigned long *mem_start,
+                                        unsigned long *mem_end)
+{
+        int l, align;
+        phandle child;
+        char *namep, *prev_name, *sstart;
+        unsigned long soff;
+        unsigned char *valp;
+        unsigned long offset = reloc_offset();
+        char pname[32];
+        char *path;
+
+        path = RELOC(prom_scratch);
+
+        dt_push_token(OF_DT_BEGIN_NODE, mem_start, mem_end);
+
+        /* get the node's full name */
+        namep = (char *)*mem_start;
+        l = call_prom("package-to-path", 3, 1, node,
+                      namep, *mem_end - *mem_start);
+        if (l >= 0) {
+                /* Didn't fit?  Get more room. */
+                if (l+1 > *mem_end - *mem_start) {
+                        namep = make_room(mem_start, mem_end, l+1, 1);
+                        call_prom("package-to-path", 3, 1, node, namep, l);
+                }
+                namep[l] = '\0';
+                *mem_start = _ALIGN(((unsigned long) namep) + strlen(namep) + 1, 4);
+        }
+
+        /* get it again for debugging */
+        memset(path, 0, PROM_SCRATCH_SIZE);
+        call_prom("package-to-path", 3, 1, node, path, PROM_SCRATCH_SIZE-1);
+
+        /* get and store all properties */
+        prev_name = RELOC("");
+        sstart = (char *)RELOC(dt_string_start);
+        for (;;) {
+                if (call_prom("nextprop", 3, 1, node, prev_name, pname) <= 0)
+                        break;
+
+                /* find string offset */
+                soff = dt_find_string(pname);
+                if (soff == 0) {
+                        prom_printf("WARNING: Can't find string index for <%s>, node %s\n",
+                                    pname, path);
+                        break;
+                }
+                prev_name = sstart + soff;
+
+                /* get length */
+                l = call_prom("getproplen", 2, 1, node, pname);
+
+                /* sanity checks */
+                if (l < 0)
+                        continue;
+                if (l > MAX_PROPERTY_LENGTH) {
+                        prom_printf("WARNING: ignoring large property ");
+                        /* It seems OF doesn't null-terminate the path :-( */
+                        prom_printf("[%s] ", path);
+                        prom_printf("%s length 0x%x\n", pname, l);
+                        continue;
+                }
+
+                /* push property head */
+                dt_push_token(OF_DT_PROP, mem_start, mem_end);
+                dt_push_token(l, mem_start, mem_end);
+                dt_push_token(soff, mem_start, mem_end);
+
+                /* push property content */
+                align = (l >= 8) ? 8 : 4;
+                valp = make_room(mem_start, mem_end, l, align);
+                call_prom("getprop", 4, 1, node, pname, valp, l);
+                *mem_start = _ALIGN(*mem_start, 4);
+        }
+
+        /* Add a "linux,phandle" property. */
+        soff = dt_find_string(RELOC("linux,phandle"));
+        if (soff == 0)
+                prom_printf("WARNING: Can't find string index for <linux-phandle>"
+                            " node %s\n", path);
+        else {
+                dt_push_token(OF_DT_PROP, mem_start, mem_end);
+                dt_push_token(4, mem_start, mem_end);
+                dt_push_token(soff, mem_start, mem_end);
+                valp = make_room(mem_start, mem_end, 4, 4);
+                *(u32 *)valp = node;
+        }
+
+        /* do all our children */
+        child = call_prom("child", 1, 1, node);
+        while (child != (phandle)0) {
+                scan_dt_build_struct(child, mem_start, mem_end);
+                child = call_prom("peer", 1, 1, child);
+        }
+
+        dt_push_token(OF_DT_END_NODE, mem_start, mem_end);
+}
+
+static void __init flatten_device_tree(void)
+{
+        phandle root;
+        unsigned long offset = reloc_offset();
+        unsigned long mem_start, mem_end, room;
+        struct boot_param_header *hdr;
+        char *namep;
+        u64 *rsvmap;
+
+        /*
+         * Check how much room we have between alloc top & bottom (+/- a
+         * few pages), crop to 4Mb, as this is our "chuck" size
+         */
+        room = RELOC(alloc_top) - RELOC(alloc_bottom) - 0x4000;
+        if (room > DEVTREE_CHUNK_SIZE)
+                room = DEVTREE_CHUNK_SIZE;
+        prom_debug("starting device tree allocs at %x\n", RELOC(alloc_bottom));
+
+        /* Now try to claim that */
+        mem_start = (unsigned long)alloc_up(room, PAGE_SIZE);
+        if (mem_start == 0)
+                prom_panic("Can't allocate initial device-tree chunk\n");
+        mem_end = RELOC(alloc_top);
+
+        /* Get root of tree */
+        root = call_prom("peer", 1, 1, (phandle)0);
+        if (root == (phandle)0)
+                prom_panic ("couldn't get device tree root\n");
+
+        /* Build header and make room for mem rsv map */ 
+        mem_start = _ALIGN(mem_start, 4);
+        hdr = make_room(&mem_start, &mem_end, sizeof(struct boot_param_header), 4);
+        RELOC(dt_header_start) = (unsigned long)hdr;
+        rsvmap = make_room(&mem_start, &mem_end, sizeof(mem_reserve_map), 8);
+
+        /* Start of strings */
+        mem_start = PAGE_ALIGN(mem_start);
+        RELOC(dt_string_start) = mem_start;
+        mem_start += 4; /* hole */
+
+        /* Add "linux,phandle" in there, we'll need it */
+        namep = make_room(&mem_start, &mem_end, 16, 1);
+        strcpy(namep, RELOC("linux,phandle"));
+        mem_start = (unsigned long)namep + strlen(namep) + 1;
+        RELOC(dt_string_end) = mem_start;
+
+        /* Build string array */
+        prom_printf("Building dt strings...\n"); 
+        scan_dt_build_strings(root, &mem_start, &mem_end);
+
+        /* Build structure */
+        mem_start = PAGE_ALIGN(mem_start);
+        RELOC(dt_struct_start) = mem_start;
+        prom_printf("Building dt structure...\n"); 
+        scan_dt_build_struct(root, &mem_start, &mem_end);
+        dt_push_token(OF_DT_END, &mem_start, &mem_end);
+        RELOC(dt_struct_end) = PAGE_ALIGN(mem_start);
+
+        /* Finish header */
+        hdr->magic = OF_DT_HEADER;
+        hdr->totalsize = RELOC(dt_struct_end) - RELOC(dt_header_start);
+        hdr->off_dt_struct = RELOC(dt_struct_start) - RELOC(dt_header_start);
+        hdr->off_dt_strings = RELOC(dt_string_start) - RELOC(dt_header_start);
+        hdr->off_mem_rsvmap = ((unsigned long)rsvmap) - RELOC(dt_header_start);
+        hdr->version = OF_DT_VERSION;
+        hdr->last_comp_version = 1;
+
+        /* Reserve the whole thing and copy the reserve map in, we
+         * also bump mem_reserve_cnt to cause further reservations to
+         * fail since it's too late.
+         */
+        reserve_mem(RELOC(dt_header_start), hdr->totalsize);
+        memcpy(rsvmap, RELOC(mem_reserve_map), sizeof(mem_reserve_map));
+
+#ifdef DEBUG_PROM
+        {
+                int i;
+                prom_printf("reserved memory map:\n");
+                for (i = 0; i < RELOC(mem_reserve_cnt); i++)
+                        prom_printf("  %x - %x\n", RELOC(mem_reserve_map)[i].base,
+                                    RELOC(mem_reserve_map)[i].size);
+        }
+#endif
+        RELOC(mem_reserve_cnt) = MEM_RESERVE_MAP_SIZE;
+
+        prom_printf("Device tree strings 0x%x -> 0x%x\n",
+                    RELOC(dt_string_start), RELOC(dt_string_end)); 
+        prom_printf("Device tree struct  0x%x -> 0x%x\n",
+                    RELOC(dt_struct_start), RELOC(dt_struct_end));
+
+ }
+
+static void __init prom_find_boot_cpu(void)
+{
+        unsigned long offset = reloc_offset();
+        struct prom_t *_prom = PTRRELOC(&prom);
+        u32 getprop_rval;
+        ihandle prom_cpu;
+        phandle cpu_pkg;
+
+        if (prom_getprop(_prom->chosen, "cpu", &prom_cpu, sizeof(prom_cpu)) <= 0)
+                prom_panic("cannot find boot cpu");
+
+        cpu_pkg = call_prom("instance-to-package", 1, 1, prom_cpu);
+
+        prom_setprop(cpu_pkg, "linux,boot-cpu", NULL, 0);
+        prom_getprop(cpu_pkg, "reg", &getprop_rval, sizeof(getprop_rval));
+        _prom->cpu = getprop_rval;
+
+        prom_debug("Booting CPU hw index = 0x%x\n", _prom->cpu);
+}
+
+static void __init prom_check_initrd(unsigned long r3, unsigned long r4)
+{
+#ifdef CONFIG_BLK_DEV_INITRD
+        unsigned long offset = reloc_offset();
+        struct prom_t *_prom = PTRRELOC(&prom);
+
+        if ( r3 && r4 && r4 != 0xdeadbeef) {
+                u64 val;
+
+                RELOC(prom_initrd_start) = (r3 >= KERNELBASE) ? __pa(r3) : r3;
+                RELOC(prom_initrd_end) = RELOC(prom_initrd_start) + r4;
+
+                val = (u64)RELOC(prom_initrd_start);
+                prom_setprop(_prom->chosen, "linux,initrd-start", &val, sizeof(val));
+                val = (u64)RELOC(prom_initrd_end);
+                prom_setprop(_prom->chosen, "linux,initrd-end", &val, sizeof(val));
+
+                reserve_mem(RELOC(prom_initrd_start),
+                            RELOC(prom_initrd_end) - RELOC(prom_initrd_start));
+
+                prom_debug("initrd_start=0x%x\n", RELOC(prom_initrd_start));
+                prom_debug("initrd_end=0x%x\n", RELOC(prom_initrd_end));
+        }
+#endif /* CONFIG_BLK_DEV_INITRD */
+}
+
+/*
+ * We enter here early on, when the Open Firmware prom is still
+ * handling exceptions and the MMU hash table for us.
+ */
+
+unsigned long __init prom_init(unsigned long r3, unsigned long r4, unsigned long pp,
+                               unsigned long r6, unsigned long r7)
+{       
+        unsigned long offset = reloc_offset();
+        struct prom_t *_prom = PTRRELOC(&prom);
+        unsigned long phys = KERNELBASE - offset;
+        u32 getprop_rval;
+        
+        /*
+         * First zero the BSS
+         */
+        memset(PTRRELOC(&__bss_start), 0, __bss_stop - __bss_start);
+
+        /*
+         * Init interface to Open Firmware, get some node references,
+         * like /chosen
+         */
+        prom_init_client_services(pp);
+
+        /*
+         * Init prom stdout device
+         */
+        prom_init_stdout();
+        prom_debug("klimit=0x%x\n", RELOC(klimit));
+        prom_debug("offset=0x%x\n", offset);
+
+        /*
+         * Check for an initrd
+         */
+        prom_check_initrd(r3, r4);
+
+        /*
+         * Get default machine type. At this point, we do not differenciate
+         * between pSeries SMP and pSeries LPAR
+         */
+        RELOC(of_platform) = prom_find_machine_type();
+        getprop_rval = RELOC(of_platform);
+        prom_setprop(_prom->chosen, "linux,platform",
+                     &getprop_rval, sizeof(getprop_rval));
+
+        /*
+         * On pSeries, copy the CPU hold code
+         */
+        if (RELOC(of_platform) & PLATFORM_PSERIES)
+                copy_and_flush(0, KERNELBASE - offset, 0x100, 0);
+
+        /*
+         * Get memory cells format
+         */
+        getprop_rval = 1;
+        prom_getprop(_prom->root, "#size-cells",
+                     &getprop_rval, sizeof(getprop_rval));
+        _prom->root_size_cells = getprop_rval;
+        getprop_rval = 2;
+        prom_getprop(_prom->root, "#address-cells",
+                     &getprop_rval, sizeof(getprop_rval));
+        _prom->root_addr_cells = getprop_rval;
+
+        /*
+         * Do early parsing of command line
+         */
+        early_cmdline_parse();
+
+        /*
+         * Initialize memory management within prom_init
+         */
+        prom_init_mem();
+
+        /*
+         * Determine which cpu is actually running right _now_
+         */
+        prom_find_boot_cpu();
+
+        /* 
+         * Initialize display devices
+         */
+        prom_check_displays();
+
+        /*
+         * Initialize IOMMU (TCE tables) on pSeries. Do that before anything else
+         * that uses the allocator, we need to make sure we get the top of memory
+         * available for us here...
+         */
+        if (RELOC(of_platform) == PLATFORM_PSERIES)
+                prom_initialize_tce_table();
+
+        /*
+         * On non-powermacs, try to instantiate RTAS and puts all CPUs
+         * in spin-loops. PowerMacs don't have a working RTAS and use
+         * a different way to spin CPUs
+         */
+        if (RELOC(of_platform) != PLATFORM_POWERMAC) {
+                prom_instantiate_rtas();
+                prom_hold_cpus();
+        }
+
+        /*
+         * Fill in some infos for use by the kernel later on
+         */
+        if (RELOC(ppc64_iommu_off))
+                prom_setprop(_prom->chosen, "linux,iommu-off", NULL, 0);
+
+        if (RELOC(iommu_force_on))
+                prom_setprop(_prom->chosen, "linux,iommu-force-on", NULL, 0);
+
+        if (RELOC(prom_memory_limit))
+                prom_setprop(_prom->chosen, "linux,memory-limit",
+                        PTRRELOC(&prom_memory_limit), sizeof(RELOC(prom_memory_limit)));
+
+        if (RELOC(prom_tce_alloc_start)) {
+                prom_setprop(_prom->chosen, "linux,tce-alloc-start",
+                        PTRRELOC(&prom_tce_alloc_start), sizeof(RELOC(prom_tce_alloc_start)));
+                prom_setprop(_prom->chosen, "linux,tce-alloc-end",
+                        PTRRELOC(&prom_tce_alloc_end), sizeof(RELOC(prom_tce_alloc_end)));
+        }
+
+        /*
+         * Now finally create the flattened device-tree
+         */
+        prom_printf("copying OF device tree ...\n");
+        flatten_device_tree();
+
+        /* in case stdin is USB and still active on IBM machines... */
+        prom_close_stdin();
+
+        /*
+         * Call OF "quiesce" method to shut down pending DMA's from
+         * devices etc...
+         */
+        prom_printf("Calling quiesce ...\n");
+        call_prom("quiesce", 0, 0);
+
+        /*
+         * And finally, call the kernel passing it the flattened device
+         * tree and NULL as r5, thus triggering the new entry point which
+         * is common to us and kexec
+         */
+        prom_printf("returning from prom_init\n");
+        prom_debug("->dt_header_start=0x%x\n", RELOC(dt_header_start));
+        prom_debug("->phys=0x%x\n", phys);
+
+        __start(RELOC(dt_header_start), phys, 0);
+
+        return 0;
+}
+