Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 179 insertions, 0 deletions

diff --git a/arch/ppc/platforms/tqm8xx.h b/arch/ppc/platforms/tqm8xx.h
new file mode 100644
index 000000000000..2150dc87b18f
--- /dev/null
+++ b/arch/ppc/platforms/tqm8xx.h
@@ -0,0 +1,179 @@
+/*
+ * TQM8xx(L) board specific definitions
+ *
+ * Copyright (c) 1999-2002 Wolfgang Denk (wd@denx.de)
+ */
+
+#ifdef __KERNEL__
+#ifndef __MACH_TQM8xx_H
+#define __MACH_TQM8xx_H
+
+#include <linux/config.h>
+
+#include <asm/ppcboot.h>
+
+#ifndef __ASSEMBLY__
+#define TQM_IMMR_BASE   0xFFF00000      /* phys. addr of IMMR */
+#define TQM_IMAP_SIZE   (64 * 1024)     /* size of mapped area */
+
+#define IMAP_ADDR       TQM_IMMR_BASE   /* physical base address of IMMR area */
+#define IMAP_SIZE       TQM_IMAP_SIZE   /* mapped size of IMMR area */
+
+/*-----------------------------------------------------------------------
+ * PCMCIA stuff
+ *-----------------------------------------------------------------------
+ *
+ */
+#define PCMCIA_MEM_SIZE         ( 64 << 20 )
+
+#ifndef CONFIG_KUP4K
+# define        MAX_HWIFS       1       /* overwrite default in include/asm-ppc/ide.h   */
+
+#else   /* CONFIG_KUP4K */
+
+# define        MAX_HWIFS       2       /* overwrite default in include/asm-ppc/ide.h   */
+# ifndef __ASSEMBLY__
+# include <asm/8xx_immap.h>
+static __inline__ void ide_led(int on)
+{
+        volatile immap_t        *immap = (immap_t *)IMAP_ADDR;
+
+        if (on) {
+                immap->im_ioport.iop_padat &= ~0x80;
+        } else {
+                immap->im_ioport.iop_padat |= 0x80;
+        }
+}
+# endif /* __ASSEMBLY__ */
+# define IDE_LED(x) ide_led((x))
+#endif  /* CONFIG_KUP4K */
+
+/*
+ * Definitions for IDE0 Interface
+ */
+#define IDE0_BASE_OFFSET                0
+#define IDE0_DATA_REG_OFFSET            (PCMCIA_MEM_SIZE + 0x320)
+#define IDE0_ERROR_REG_OFFSET           (2 * PCMCIA_MEM_SIZE + 0x320 + 1)
+#define IDE0_NSECTOR_REG_OFFSET         (2 * PCMCIA_MEM_SIZE + 0x320 + 2)
+#define IDE0_SECTOR_REG_OFFSET          (2 * PCMCIA_MEM_SIZE + 0x320 + 3)
+#define IDE0_LCYL_REG_OFFSET            (2 * PCMCIA_MEM_SIZE + 0x320 + 4)
+#define IDE0_HCYL_REG_OFFSET            (2 * PCMCIA_MEM_SIZE + 0x320 + 5)
+#define IDE0_SELECT_REG_OFFSET          (2 * PCMCIA_MEM_SIZE + 0x320 + 6)
+#define IDE0_STATUS_REG_OFFSET          (2 * PCMCIA_MEM_SIZE + 0x320 + 7)
+#define IDE0_CONTROL_REG_OFFSET         0x0106
+#define IDE0_IRQ_REG_OFFSET             0x000A  /* not used */
+
+/* define IO_BASE for PCMCIA */
+#define _IO_BASE 0x80000000
+#define _IO_BASE_SIZE  (64<<10)
+
+#define FEC_INTERRUPT            9      /* = SIU_LEVEL4                 */
+#define PHY_INTERRUPT           12      /* = IRQ6                       */
+#define IDE0_INTERRUPT          13
+
+#ifdef CONFIG_IDE
+#endif
+
+/*-----------------------------------------------------------------------
+ * CPM Ethernet through SCCx.
+ *-----------------------------------------------------------------------
+ *
+ */
+
+/***  TQM823L, TQM850L  ***********************************************/
+
+#if defined(CONFIG_TQM823L) || defined(CONFIG_TQM850L)
+/* Bits in parallel I/O port registers that have to be set/cleared
+ * to configure the pins for SCC1 use.
+ */
+#define PA_ENET_RXD     ((ushort)0x0004)        /* PA 13 */
+#define PA_ENET_TXD     ((ushort)0x0008)        /* PA 12 */
+#define PA_ENET_RCLK    ((ushort)0x0100)        /* PA  7 */
+#define PA_ENET_TCLK    ((ushort)0x0400)        /* PA  5 */
+
+#define PB_ENET_TENA    ((uint)0x00002000)      /* PB 18 */
+
+#define PC_ENET_CLSN    ((ushort)0x0040)        /* PC  9 */
+#define PC_ENET_RENA    ((ushort)0x0080)        /* PC  8 */
+
+/* Control bits in the SICR to route TCLK (CLK3) and RCLK (CLK1) to
+ * SCC2.  Also, make sure GR2 (bit 16) and SC2 (bit 17) are zero.
+ */
+#define SICR_ENET_MASK  ((uint)0x0000ff00)
+#define SICR_ENET_CLKRT ((uint)0x00002600)
+#endif  /* CONFIG_TQM823L, CONFIG_TQM850L */
+
+/***  TQM860L  ********************************************************/
+
+#ifdef CONFIG_TQM860L
+/* Bits in parallel I/O port registers that have to be set/cleared
+ * to configure the pins for SCC1 use.
+ */
+#define PA_ENET_RXD     ((ushort)0x0001)        /* PA 15 */
+#define PA_ENET_TXD     ((ushort)0x0002)        /* PA 14 */
+#define PA_ENET_RCLK    ((ushort)0x0100)        /* PA  7 */
+#define PA_ENET_TCLK    ((ushort)0x0400)        /* PA  5 */
+
+#define PC_ENET_TENA    ((ushort)0x0001)        /* PC 15 */
+#define PC_ENET_CLSN    ((ushort)0x0010)        /* PC 11 */
+#define PC_ENET_RENA    ((ushort)0x0020)        /* PC 10 */
+
+/* Control bits in the SICR to route TCLK (CLK3) and RCLK (CLK1) to
+ * SCC1.  Also, make sure GR1 (bit 24) and SC1 (bit 25) are zero.
+ */
+#define SICR_ENET_MASK  ((uint)0x000000ff)
+#define SICR_ENET_CLKRT ((uint)0x00000026)
+#endif  /* CONFIG_TQM860L */
+
+/***  FPS850L  *********************************************************/
+
+#ifdef CONFIG_FPS850L
+/* Bits in parallel I/O port registers that have to be set/cleared
+ * to configure the pins for SCC1 use.
+ */
+#define PA_ENET_RXD     ((ushort)0x0004)        /* PA 13 */
+#define PA_ENET_TXD     ((ushort)0x0008)        /* PA 12 */
+#define PA_ENET_RCLK    ((ushort)0x0100)        /* PA  7 */
+#define PA_ENET_TCLK    ((ushort)0x0400)        /* PA  5 */
+
+#define PC_ENET_TENA    ((ushort)0x0002)        /* PC 14 */
+#define PC_ENET_CLSN    ((ushort)0x0040)        /* PC  9 */
+#define PC_ENET_RENA    ((ushort)0x0080)        /* PC  8 */
+
+/* Control bits in the SICR to route TCLK (CLK2) and RCLK (CLK4) to
+ * SCC2.  Also, make sure GR2 (bit 16) and SC2 (bit 17) are zero.
+ */
+#define SICR_ENET_MASK  ((uint)0x0000ff00)
+#define SICR_ENET_CLKRT ((uint)0x00002600)
+#endif  /* CONFIG_FPS850L */
+
+/***  SM850  *********************************************************/
+
+/* The SM850 Service Module uses SCC2 for IrDA and SCC3 for Ethernet */
+
+#ifdef CONFIG_SM850
+#define PB_ENET_RXD     ((uint)0x00000004)      /* PB 29 */
+#define PB_ENET_TXD     ((uint)0x00000002)      /* PB 30 */
+#define PA_ENET_RCLK    ((ushort)0x0100)        /* PA  7 */
+#define PA_ENET_TCLK    ((ushort)0x0400)        /* PA  5 */
+
+#define PC_ENET_LBK     ((ushort)0x0008)        /* PC 12 */
+#define PC_ENET_TENA    ((ushort)0x0004)        /* PC 13 */
+
+#define PC_ENET_RENA    ((ushort)0x0800)        /* PC  4 */
+#define PC_ENET_CLSN    ((ushort)0x0400)        /* PC  5 */
+
+/* Control bits in the SICR to route TCLK (CLK3) and RCLK (CLK1) to
+ * SCC3.  Also, make sure GR3 (bit 8) and SC3 (bit 9) are zero.
+ */
+#define SICR_ENET_MASK  ((uint)0x00FF0000)
+#define SICR_ENET_CLKRT ((uint)0x00260000)
+#endif  /* CONFIG_SM850 */
+
+/* We don't use the 8259.
+*/
+#define NR_8259_INTS    0
+
+#endif /* !__ASSEMBLY__ */
+#endif  /* __MACH_TQM8xx_H */
+#endif /* __KERNEL__ */