Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 640 insertions, 0 deletions

diff --git a/arch/ppc/platforms/pmac_smp.c b/arch/ppc/platforms/pmac_smp.c
new file mode 100644
index 000000000000..2b88745576a0
--- /dev/null
+++ b/arch/ppc/platforms/pmac_smp.c
@@ -0,0 +1,640 @@
+/*
+ * SMP support for power macintosh.
+ *
+ * We support both the old "powersurge" SMP architecture
+ * and the current Core99 (G4 PowerMac) machines.
+ *
+ * Note that we don't support the very first rev. of
+ * Apple/DayStar 2 CPUs board, the one with the funky
+ * watchdog. Hopefully, none of these should be there except
+ * maybe internally to Apple. I should probably still add some
+ * code to detect this card though and disable SMP. --BenH.
+ *
+ * Support Macintosh G4 SMP by Troy Benjegerdes (hozer@drgw.net)
+ * and Ben Herrenschmidt <benh@kernel.crashing.org>.
+ *
+ * Support for DayStar quad CPU cards
+ * Copyright (C) XLR8, Inc. 1994-2000
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ */
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/smp.h>
+#include <linux/smp_lock.h>
+#include <linux/interrupt.h>
+#include <linux/kernel_stat.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/errno.h>
+#include <linux/hardirq.h>
+
+#include <asm/ptrace.h>
+#include <asm/atomic.h>
+#include <asm/irq.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/sections.h>
+#include <asm/io.h>
+#include <asm/prom.h>
+#include <asm/smp.h>
+#include <asm/residual.h>
+#include <asm/machdep.h>
+#include <asm/pmac_feature.h>
+#include <asm/time.h>
+#include <asm/open_pic.h>
+#include <asm/cacheflush.h>
+#include <asm/keylargo.h>
+
+/*
+ * Powersurge (old powermac SMP) support.
+ */
+
+extern void __secondary_start_psurge(void);
+extern void __secondary_start_psurge2(void);    /* Temporary horrible hack */
+extern void __secondary_start_psurge3(void);    /* Temporary horrible hack */
+
+/* Addresses for powersurge registers */
+#define HAMMERHEAD_BASE         0xf8000000
+#define HHEAD_CONFIG            0x90
+#define HHEAD_SEC_INTR          0xc0
+
+/* register for interrupting the primary processor on the powersurge */
+/* N.B. this is actually the ethernet ROM! */
+#define PSURGE_PRI_INTR         0xf3019000
+
+/* register for storing the start address for the secondary processor */
+/* N.B. this is the PCI config space address register for the 1st bridge */
+#define PSURGE_START            0xf2800000
+
+/* Daystar/XLR8 4-CPU card */
+#define PSURGE_QUAD_REG_ADDR    0xf8800000
+
+#define PSURGE_QUAD_IRQ_SET     0
+#define PSURGE_QUAD_IRQ_CLR     1
+#define PSURGE_QUAD_IRQ_PRIMARY 2
+#define PSURGE_QUAD_CKSTOP_CTL  3
+#define PSURGE_QUAD_PRIMARY_ARB 4
+#define PSURGE_QUAD_BOARD_ID    6
+#define PSURGE_QUAD_WHICH_CPU   7
+#define PSURGE_QUAD_CKSTOP_RDBK 8
+#define PSURGE_QUAD_RESET_CTL   11
+
+#define PSURGE_QUAD_OUT(r, v)   (out_8(quad_base + ((r) << 4) + 4, (v)))
+#define PSURGE_QUAD_IN(r)       (in_8(quad_base + ((r) << 4) + 4) & 0x0f)
+#define PSURGE_QUAD_BIS(r, v)   (PSURGE_QUAD_OUT((r), PSURGE_QUAD_IN(r) | (v)))
+#define PSURGE_QUAD_BIC(r, v)   (PSURGE_QUAD_OUT((r), PSURGE_QUAD_IN(r) & ~(v)))
+
+/* virtual addresses for the above */
+static volatile u8 *hhead_base;
+static volatile u8 *quad_base;
+static volatile u32 *psurge_pri_intr;
+static volatile u8 *psurge_sec_intr;
+static volatile u32 *psurge_start;
+
+/* values for psurge_type */
+#define PSURGE_NONE             -1
+#define PSURGE_DUAL             0
+#define PSURGE_QUAD_OKEE        1
+#define PSURGE_QUAD_COTTON      2
+#define PSURGE_QUAD_ICEGRASS    3
+
+/* what sort of powersurge board we have */
+static int psurge_type = PSURGE_NONE;
+
+/* L2 and L3 cache settings to pass from CPU0 to CPU1 */
+volatile static long int core99_l2_cache;
+volatile static long int core99_l3_cache;
+
+/* Timebase freeze GPIO */
+static unsigned int core99_tb_gpio;
+
+/* Sync flag for HW tb sync */
+static volatile int sec_tb_reset = 0;
+
+static void __init core99_init_caches(int cpu)
+{
+        if (!cpu_has_feature(CPU_FTR_L2CR))
+                return;
+
+        if (cpu == 0) {
+                core99_l2_cache = _get_L2CR();
+                printk("CPU0: L2CR is %lx\n", core99_l2_cache);
+        } else {
+                printk("CPU%d: L2CR was %lx\n", cpu, _get_L2CR());
+                _set_L2CR(0);
+                _set_L2CR(core99_l2_cache);
+                printk("CPU%d: L2CR set to %lx\n", cpu, core99_l2_cache);
+        }
+
+        if (!cpu_has_feature(CPU_FTR_L3CR))
+                return;
+
+        if (cpu == 0){
+                core99_l3_cache = _get_L3CR();
+                printk("CPU0: L3CR is %lx\n", core99_l3_cache);
+        } else {
+                printk("CPU%d: L3CR was %lx\n", cpu, _get_L3CR());
+                _set_L3CR(0);
+                _set_L3CR(core99_l3_cache);
+                printk("CPU%d: L3CR set to %lx\n", cpu, core99_l3_cache);
+        }
+}
+
+/*
+ * Set and clear IPIs for powersurge.
+ */
+static inline void psurge_set_ipi(int cpu)
+{
+        if (psurge_type == PSURGE_NONE)
+                return;
+        if (cpu == 0)
+                in_be32(psurge_pri_intr);
+        else if (psurge_type == PSURGE_DUAL)
+                out_8(psurge_sec_intr, 0);
+        else
+                PSURGE_QUAD_OUT(PSURGE_QUAD_IRQ_SET, 1 << cpu);
+}
+
+static inline void psurge_clr_ipi(int cpu)
+{
+        if (cpu > 0) {
+                switch(psurge_type) {
+                case PSURGE_DUAL:
+                        out_8(psurge_sec_intr, ~0);
+                case PSURGE_NONE:
+                        break;
+                default:
+                        PSURGE_QUAD_OUT(PSURGE_QUAD_IRQ_CLR, 1 << cpu);
+                }
+        }
+}
+
+/*
+ * On powersurge (old SMP powermac architecture) we don't have
+ * separate IPIs for separate messages like openpic does.  Instead
+ * we have a bitmap for each processor, where a 1 bit means that
+ * the corresponding message is pending for that processor.
+ * Ideally each cpu's entry would be in a different cache line.
+ *  -- paulus.
+ */
+static unsigned long psurge_smp_message[NR_CPUS];
+
+void __pmac psurge_smp_message_recv(struct pt_regs *regs)
+{
+        int cpu = smp_processor_id();
+        int msg;
+
+        /* clear interrupt */
+        psurge_clr_ipi(cpu);
+
+        if (num_online_cpus() < 2)
+                return;
+
+        /* make sure there is a message there */
+        for (msg = 0; msg < 4; msg++)
+                if (test_and_clear_bit(msg, &psurge_smp_message[cpu]))
+                        smp_message_recv(msg, regs);
+}
+
+irqreturn_t __pmac psurge_primary_intr(int irq, void *d, struct pt_regs *regs)
+{
+        psurge_smp_message_recv(regs);
+        return IRQ_HANDLED;
+}
+
+static void __pmac smp_psurge_message_pass(int target, int msg, unsigned long data,
+                                           int wait)
+{
+        int i;
+
+        if (num_online_cpus() < 2)
+                return;
+
+        for (i = 0; i < NR_CPUS; i++) {
+                if (!cpu_online(i))
+                        continue;
+                if (target == MSG_ALL
+                    || (target == MSG_ALL_BUT_SELF && i != smp_processor_id())
+                    || target == i) {
+                        set_bit(msg, &psurge_smp_message[i]);
+                        psurge_set_ipi(i);
+                }
+        }
+}
+
+/*
+ * Determine a quad card presence. We read the board ID register, we
+ * force the data bus to change to something else, and we read it again.
+ * It it's stable, then the register probably exist (ugh !)
+ */
+static int __init psurge_quad_probe(void)
+{
+        int type;
+        unsigned int i;
+
+        type = PSURGE_QUAD_IN(PSURGE_QUAD_BOARD_ID);
+        if (type < PSURGE_QUAD_OKEE || type > PSURGE_QUAD_ICEGRASS
+            || type != PSURGE_QUAD_IN(PSURGE_QUAD_BOARD_ID))
+                return PSURGE_DUAL;
+
+        /* looks OK, try a slightly more rigorous test */
+        /* bogus is not necessarily cacheline-aligned,
+           though I don't suppose that really matters.  -- paulus */
+        for (i = 0; i < 100; i++) {
+                volatile u32 bogus[8];
+                bogus[(0+i)%8] = 0x00000000;
+                bogus[(1+i)%8] = 0x55555555;
+                bogus[(2+i)%8] = 0xFFFFFFFF;
+                bogus[(3+i)%8] = 0xAAAAAAAA;
+                bogus[(4+i)%8] = 0x33333333;
+                bogus[(5+i)%8] = 0xCCCCCCCC;
+                bogus[(6+i)%8] = 0xCCCCCCCC;
+                bogus[(7+i)%8] = 0x33333333;
+                wmb();
+                asm volatile("dcbf 0,%0" : : "r" (bogus) : "memory");
+                mb();
+                if (type != PSURGE_QUAD_IN(PSURGE_QUAD_BOARD_ID))
+                        return PSURGE_DUAL;
+        }
+        return type;
+}
+
+static void __init psurge_quad_init(void)
+{
+        int procbits;
+
+        if (ppc_md.progress) ppc_md.progress("psurge_quad_init", 0x351);
+        procbits = ~PSURGE_QUAD_IN(PSURGE_QUAD_WHICH_CPU);
+        if (psurge_type == PSURGE_QUAD_ICEGRASS)
+                PSURGE_QUAD_BIS(PSURGE_QUAD_RESET_CTL, procbits);
+        else
+                PSURGE_QUAD_BIC(PSURGE_QUAD_CKSTOP_CTL, procbits);
+        mdelay(33);
+        out_8(psurge_sec_intr, ~0);
+        PSURGE_QUAD_OUT(PSURGE_QUAD_IRQ_CLR, procbits);
+        PSURGE_QUAD_BIS(PSURGE_QUAD_RESET_CTL, procbits);
+        if (psurge_type != PSURGE_QUAD_ICEGRASS)
+                PSURGE_QUAD_BIS(PSURGE_QUAD_CKSTOP_CTL, procbits);
+        PSURGE_QUAD_BIC(PSURGE_QUAD_PRIMARY_ARB, procbits);
+        mdelay(33);
+        PSURGE_QUAD_BIC(PSURGE_QUAD_RESET_CTL, procbits);
+        mdelay(33);
+        PSURGE_QUAD_BIS(PSURGE_QUAD_PRIMARY_ARB, procbits);
+        mdelay(33);
+}
+
+static int __init smp_psurge_probe(void)
+{
+        int i, ncpus;
+
+        /* We don't do SMP on the PPC601 -- paulus */
+        if (PVR_VER(mfspr(SPRN_PVR)) == 1)
+                return 1;
+
+        /*
+         * The powersurge cpu board can be used in the generation
+         * of powermacs that have a socket for an upgradeable cpu card,
+         * including the 7500, 8500, 9500, 9600.
+         * The device tree doesn't tell you if you have 2 cpus because
+         * OF doesn't know anything about the 2nd processor.
+         * Instead we look for magic bits in magic registers,
+         * in the hammerhead memory controller in the case of the
+         * dual-cpu powersurge board.  -- paulus.
+         */
+        if (find_devices("hammerhead") == NULL)
+                return 1;
+
+        hhead_base = ioremap(HAMMERHEAD_BASE, 0x800);
+        quad_base = ioremap(PSURGE_QUAD_REG_ADDR, 1024);
+        psurge_sec_intr = hhead_base + HHEAD_SEC_INTR;
+
+        psurge_type = psurge_quad_probe();
+        if (psurge_type != PSURGE_DUAL) {
+                psurge_quad_init();
+                /* All released cards using this HW design have 4 CPUs */
+                ncpus = 4;
+        } else {
+                iounmap((void *) quad_base);
+                if ((in_8(hhead_base + HHEAD_CONFIG) & 0x02) == 0) {
+                        /* not a dual-cpu card */
+                        iounmap((void *) hhead_base);
+                        psurge_type = PSURGE_NONE;
+                        return 1;
+                }
+                ncpus = 2;
+        }
+
+        psurge_start = ioremap(PSURGE_START, 4);
+        psurge_pri_intr = ioremap(PSURGE_PRI_INTR, 4);
+
+        /* this is not actually strictly necessary -- paulus. */
+        for (i = 1; i < ncpus; ++i)
+                smp_hw_index[i] = i;
+
+        if (ppc_md.progress) ppc_md.progress("smp_psurge_probe - done", 0x352);
+
+        return ncpus;
+}
+
+static void __init smp_psurge_kick_cpu(int nr)
+{
+        void (*start)(void) = __secondary_start_psurge;
+        unsigned long a;
+
+        /* may need to flush here if secondary bats aren't setup */
+        for (a = KERNELBASE; a < KERNELBASE + 0x800000; a += 32)
+                asm volatile("dcbf 0,%0" : : "r" (a) : "memory");
+        asm volatile("sync");
+
+        if (ppc_md.progress) ppc_md.progress("smp_psurge_kick_cpu", 0x353);
+
+        /* setup entry point of secondary processor */
+        switch (nr) {
+        case 2:
+                start = __secondary_start_psurge2;
+                break;
+        case 3:
+                start = __secondary_start_psurge3;
+                break;
+        }
+
+        out_be32(psurge_start, __pa(start));
+        mb();
+
+        psurge_set_ipi(nr);
+        udelay(10);
+        psurge_clr_ipi(nr);
+
+        if (ppc_md.progress) ppc_md.progress("smp_psurge_kick_cpu - done", 0x354);
+}
+
+/*
+ * With the dual-cpu powersurge board, the decrementers and timebases
+ * of both cpus are frozen after the secondary cpu is started up,
+ * until we give the secondary cpu another interrupt.  This routine
+ * uses this to get the timebases synchronized.
+ *  -- paulus.
+ */
+static void __init psurge_dual_sync_tb(int cpu_nr)
+{
+        int t;
+
+        set_dec(tb_ticks_per_jiffy);
+        set_tb(0, 0);
+        last_jiffy_stamp(cpu_nr) = 0;
+
+        if (cpu_nr > 0) {
+                mb();
+                sec_tb_reset = 1;
+                return;
+        }
+
+        /* wait for the secondary to have reset its TB before proceeding */
+        for (t = 10000000; t > 0 && !sec_tb_reset; --t)
+                ;
+
+        /* now interrupt the secondary, starting both TBs */
+        psurge_set_ipi(1);
+
+        smp_tb_synchronized = 1;
+}
+
+static struct irqaction psurge_irqaction = {
+        .handler = psurge_primary_intr,
+        .flags = SA_INTERRUPT,
+        .mask = CPU_MASK_NONE,
+        .name = "primary IPI",
+};
+
+static void __init smp_psurge_setup_cpu(int cpu_nr)
+{
+
+        if (cpu_nr == 0) {
+                /* If we failed to start the second CPU, we should still
+                 * send it an IPI to start the timebase & DEC or we might
+                 * have them stuck.
+                 */
+                if (num_online_cpus() < 2) {
+                        if (psurge_type == PSURGE_DUAL)
+                                psurge_set_ipi(1);
+                        return;
+                }
+                /* reset the entry point so if we get another intr we won't
+                 * try to startup again */
+                out_be32(psurge_start, 0x100);
+                if (setup_irq(30, &psurge_irqaction))
+                        printk(KERN_ERR "Couldn't get primary IPI interrupt");
+        }
+
+        if (psurge_type == PSURGE_DUAL)
+                psurge_dual_sync_tb(cpu_nr);
+}
+
+void __init smp_psurge_take_timebase(void)
+{
+        /* Dummy implementation */
+}
+
+void __init smp_psurge_give_timebase(void)
+{
+        /* Dummy implementation */
+}
+
+static int __init smp_core99_probe(void)
+{
+#ifdef CONFIG_6xx
+        extern int powersave_nap;
+#endif
+        struct device_node *cpus, *firstcpu;
+        int i, ncpus = 0, boot_cpu = -1;
+        u32 *tbprop;
+
+        if (ppc_md.progress) ppc_md.progress("smp_core99_probe", 0x345);
+        cpus = firstcpu = find_type_devices("cpu");
+        while(cpus != NULL) {
+                u32 *regprop = (u32 *)get_property(cpus, "reg", NULL);
+                char *stateprop = (char *)get_property(cpus, "state", NULL);
+                if (regprop != NULL && stateprop != NULL &&
+                    !strncmp(stateprop, "running", 7))
+                        boot_cpu = *regprop;
+                ++ncpus;
+                cpus = cpus->next;
+        }
+        if (boot_cpu == -1)
+                printk(KERN_WARNING "Couldn't detect boot CPU !\n");
+        if (boot_cpu != 0)
+                printk(KERN_WARNING "Boot CPU is %d, unsupported setup !\n", boot_cpu);
+
+        if (machine_is_compatible("MacRISC4")) {
+                extern struct smp_ops_t core99_smp_ops;
+
+                core99_smp_ops.take_timebase = smp_generic_take_timebase;
+                core99_smp_ops.give_timebase = smp_generic_give_timebase;
+        } else {
+                if (firstcpu != NULL)
+                        tbprop = (u32 *)get_property(firstcpu, "timebase-enable", NULL);
+                if (tbprop)
+                        core99_tb_gpio = *tbprop;
+                else
+                        core99_tb_gpio = KL_GPIO_TB_ENABLE;
+        }
+
+        if (ncpus > 1) {
+                openpic_request_IPIs();
+                for (i = 1; i < ncpus; ++i)
+                        smp_hw_index[i] = i;
+#ifdef CONFIG_6xx
+                powersave_nap = 0;
+#endif
+                core99_init_caches(0);
+        }
+
+        return ncpus;
+}
+
+static void __init smp_core99_kick_cpu(int nr)
+{
+        unsigned long save_vector, new_vector;
+        unsigned long flags;
+
+        volatile unsigned long *vector
+                 = ((volatile unsigned long *)(KERNELBASE+0x100));
+        if (nr < 1 || nr > 3)
+                return;
+        if (ppc_md.progress) ppc_md.progress("smp_core99_kick_cpu", 0x346);
+
+        local_irq_save(flags);
+        local_irq_disable();
+
+        /* Save reset vector */
+        save_vector = *vector;
+
+        /* Setup fake reset vector that does    
+         *   b __secondary_start_psurge - KERNELBASE
+         */
+        switch(nr) {
+                case 1:
+                        new_vector = (unsigned long)__secondary_start_psurge;
+                        break;
+                case 2:
+                        new_vector = (unsigned long)__secondary_start_psurge2;
+                        break;
+                case 3:
+                        new_vector = (unsigned long)__secondary_start_psurge3;
+                        break;
+        }
+        *vector = 0x48000002 + new_vector - KERNELBASE;
+
+        /* flush data cache and inval instruction cache */
+        flush_icache_range((unsigned long) vector, (unsigned long) vector + 4);
+
+        /* Put some life in our friend */
+        pmac_call_feature(PMAC_FTR_RESET_CPU, NULL, nr, 0);
+
+        /* FIXME: We wait a bit for the CPU to take the exception, I should
+         * instead wait for the entry code to set something for me. Well,
+         * ideally, all that crap will be done in prom.c and the CPU left
+         * in a RAM-based wait loop like CHRP.
+         */
+        mdelay(1);
+
+        /* Restore our exception vector */
+        *vector = save_vector;
+        flush_icache_range((unsigned long) vector, (unsigned long) vector + 4);
+
+        local_irq_restore(flags);
+        if (ppc_md.progress) ppc_md.progress("smp_core99_kick_cpu done", 0x347);
+}
+
+static void __init smp_core99_setup_cpu(int cpu_nr)
+{
+        /* Setup L2/L3 */
+        if (cpu_nr != 0)
+                core99_init_caches(cpu_nr);
+
+        /* Setup openpic */
+        do_openpic_setup_cpu();
+
+        if (cpu_nr == 0) {
+#ifdef CONFIG_POWER4
+                extern void g5_phy_disable_cpu1(void);
+
+                /* If we didn't start the second CPU, we must take
+                 * it off the bus
+                 */
+                if (machine_is_compatible("MacRISC4") &&
+                    num_online_cpus() < 2)              
+                        g5_phy_disable_cpu1();
+#endif /* CONFIG_POWER4 */
+                if (ppc_md.progress) ppc_md.progress("core99_setup_cpu 0 done", 0x349);
+        }
+}
+
+void __init smp_core99_take_timebase(void)
+{
+        /* Secondary processor "takes" the timebase by freezing
+         * it, resetting its local TB and telling CPU 0 to go on
+         */
+        pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, core99_tb_gpio, 4);
+        pmac_call_feature(PMAC_FTR_READ_GPIO, NULL, core99_tb_gpio, 0);
+        mb();
+
+        set_dec(tb_ticks_per_jiffy);
+        set_tb(0, 0);
+        last_jiffy_stamp(smp_processor_id()) = 0;
+
+        mb();
+        sec_tb_reset = 1;
+}
+
+void __init smp_core99_give_timebase(void)
+{
+        unsigned int t;
+
+        /* Primary processor waits for secondary to have frozen
+         * the timebase, resets local TB, and kick timebase again
+         */
+        /* wait for the secondary to have reset its TB before proceeding */
+        for (t = 1000; t > 0 && !sec_tb_reset; --t)
+                udelay(1000);
+        if (t == 0)
+                printk(KERN_WARNING "Timeout waiting sync on second CPU\n");
+
+        set_dec(tb_ticks_per_jiffy);
+        set_tb(0, 0);
+        last_jiffy_stamp(smp_processor_id()) = 0;
+        mb();
+
+        /* Now, restart the timebase by leaving the GPIO to an open collector */
+        pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, core99_tb_gpio, 0);
+        pmac_call_feature(PMAC_FTR_READ_GPIO, NULL, core99_tb_gpio, 0);
+
+        smp_tb_synchronized = 1;
+}
+
+
+/* PowerSurge-style Macs */
+struct smp_ops_t psurge_smp_ops __pmacdata = {
+        .message_pass   = smp_psurge_message_pass,
+        .probe          = smp_psurge_probe,
+        .kick_cpu       = smp_psurge_kick_cpu,
+        .setup_cpu      = smp_psurge_setup_cpu,
+        .give_timebase  = smp_psurge_give_timebase,
+        .take_timebase  = smp_psurge_take_timebase,
+};
+
+/* Core99 Macs (dual G4s) */
+struct smp_ops_t core99_smp_ops __pmacdata = {
+        .message_pass   = smp_openpic_message_pass,
+        .probe          = smp_core99_probe,
+        .kick_cpu       = smp_core99_kick_cpu,
+        .setup_cpu      = smp_core99_setup_cpu,
+        .give_timebase  = smp_core99_give_timebase,
+        .take_timebase  = smp_core99_take_timebase,
+};