Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 367 insertions, 0 deletions

diff --git a/arch/ppc/platforms/4xx/ocotea.c b/arch/ppc/platforms/4xx/ocotea.c
new file mode 100644
index 000000000000..28de707434f1
--- /dev/null
+++ b/arch/ppc/platforms/4xx/ocotea.c
@@ -0,0 +1,367 @@
+/*
+ * arch/ppc/platforms/4xx/ocotea.c
+ *
+ * Ocotea board specific routines
+ *
+ * Matt Porter <mporter@kernel.crashing.org>
+ *
+ * Copyright 2003-2005 MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/config.h>
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/reboot.h>
+#include <linux/pci.h>
+#include <linux/kdev_t.h>
+#include <linux/types.h>
+#include <linux/major.h>
+#include <linux/blkdev.h>
+#include <linux/console.h>
+#include <linux/delay.h>
+#include <linux/ide.h>
+#include <linux/initrd.h>
+#include <linux/irq.h>
+#include <linux/seq_file.h>
+#include <linux/root_dev.h>
+#include <linux/tty.h>
+#include <linux/serial.h>
+#include <linux/serial_core.h>
+
+#include <asm/system.h>
+#include <asm/pgtable.h>
+#include <asm/page.h>
+#include <asm/dma.h>
+#include <asm/io.h>
+#include <asm/machdep.h>
+#include <asm/ocp.h>
+#include <asm/pci-bridge.h>
+#include <asm/time.h>
+#include <asm/todc.h>
+#include <asm/bootinfo.h>
+#include <asm/ppc4xx_pic.h>
+#include <asm/ppcboot.h>
+
+#include <syslib/gen550.h>
+#include <syslib/ibm440gx_common.h>
+
+/*
+ * This is a horrible kludge, we eventually need to abstract this
+ * generic PHY stuff, so the  standard phy mode defines can be
+ * easily used from arch code.
+ */
+#include "../../../../drivers/net/ibm_emac/ibm_emac_phy.h"
+
+bd_t __res;
+
+static struct ibm44x_clocks clocks __initdata;
+
+static void __init
+ocotea_calibrate_decr(void)
+{
+        unsigned int freq;
+
+        if (mfspr(SPRN_CCR1) & CCR1_TCS)
+                freq = OCOTEA_TMR_CLK;
+        else
+                freq = clocks.cpu;
+
+        ibm44x_calibrate_decr(freq);
+}
+
+static int
+ocotea_show_cpuinfo(struct seq_file *m)
+{
+        seq_printf(m, "vendor\t\t: IBM\n");
+        seq_printf(m, "machine\t\t: PPC440GX EVB (Ocotea)\n");
+        ibm440gx_show_cpuinfo(m);
+        return 0;
+}
+
+static inline int
+ocotea_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
+{
+        static char pci_irq_table[][4] =
+        /*
+         *      PCI IDSEL/INTPIN->INTLINE
+         *         A   B   C   D
+         */
+        {
+                { 23, 23, 23, 23 },     /* IDSEL 1 - PCI Slot 0 */
+                { 24, 24, 24, 24 },     /* IDSEL 2 - PCI Slot 1 */
+                { 25, 25, 25, 25 },     /* IDSEL 3 - PCI Slot 2 */
+                { 26, 26, 26, 26 },     /* IDSEL 4 - PCI Slot 3 */
+        };
+
+        const long min_idsel = 1, max_idsel = 4, irqs_per_slot = 4;
+        return PCI_IRQ_TABLE_LOOKUP;
+}
+
+static void __init ocotea_set_emacdata(void)
+{
+        struct ocp_def *def;
+        struct ocp_func_emac_data *emacdata;
+        int i;
+
+        /*
+         * Note: Current rev. board only operates in Group 4a
+         * mode, so we always set EMAC0-1 for SMII and EMAC2-3
+         * for RGMII (though these could run in RTBI just the same).
+         *
+         * The FPGA reg 3 information isn't even suitable for
+         * determining the phy_mode, so if the board becomes
+         * usable in !4a, it will be necessary to parse an environment
+         * variable from the firmware or similar to properly configure
+         * the phy_map/phy_mode.
+         */
+        /* Set phy_map, phy_mode, and mac_addr for each EMAC */
+        for (i=0; i<4; i++) {
+                def = ocp_get_one_device(OCP_VENDOR_IBM, OCP_FUNC_EMAC, i);
+                emacdata = def->additions;
+                if (i < 2) {
+                        emacdata->phy_map = 0x00000001; /* Skip 0x00 */
+                        emacdata->phy_mode = PHY_MODE_SMII;
+                }
+                else {
+                        emacdata->phy_map = 0x0000ffff; /* Skip 0x00-0x0f */
+                        emacdata->phy_mode = PHY_MODE_RGMII;
+                }
+                if (i == 0)
+                        memcpy(emacdata->mac_addr, __res.bi_enetaddr, 6);
+                else if (i == 1)
+                        memcpy(emacdata->mac_addr, __res.bi_enet1addr, 6);
+                else if (i == 2)
+                        memcpy(emacdata->mac_addr, __res.bi_enet2addr, 6);
+                else if (i == 3)
+                        memcpy(emacdata->mac_addr, __res.bi_enet3addr, 6);
+        }
+}
+
+#define PCIX_READW(offset) \
+        (readw(pcix_reg_base+offset))
+
+#define PCIX_WRITEW(value, offset) \
+        (writew(value, pcix_reg_base+offset))
+
+#define PCIX_WRITEL(value, offset) \
+        (writel(value, pcix_reg_base+offset))
+
+/*
+ * FIXME: This is only here to "make it work".  This will move
+ * to a ibm_pcix.c which will contain a generic IBM PCIX bridge
+ * configuration library. -Matt
+ */
+static void __init
+ocotea_setup_pcix(void)
+{
+        void *pcix_reg_base;
+
+        pcix_reg_base = ioremap64(PCIX0_REG_BASE, PCIX_REG_SIZE);
+
+        /* Enable PCIX0 I/O, Mem, and Busmaster cycles */
+        PCIX_WRITEW(PCIX_READW(PCIX0_COMMAND) | PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER, PCIX0_COMMAND);
+
+        /* Disable all windows */
+        PCIX_WRITEL(0, PCIX0_POM0SA);
+        PCIX_WRITEL(0, PCIX0_POM1SA);
+        PCIX_WRITEL(0, PCIX0_POM2SA);
+        PCIX_WRITEL(0, PCIX0_PIM0SA);
+        PCIX_WRITEL(0, PCIX0_PIM0SAH);
+        PCIX_WRITEL(0, PCIX0_PIM1SA);
+        PCIX_WRITEL(0, PCIX0_PIM2SA);
+        PCIX_WRITEL(0, PCIX0_PIM2SAH);
+
+        /* Setup 2GB PLB->PCI outbound mem window (3_8000_0000->0_8000_0000) */
+        PCIX_WRITEL(0x00000003, PCIX0_POM0LAH);
+        PCIX_WRITEL(0x80000000, PCIX0_POM0LAL);
+        PCIX_WRITEL(0x00000000, PCIX0_POM0PCIAH);
+        PCIX_WRITEL(0x80000000, PCIX0_POM0PCIAL);
+        PCIX_WRITEL(0x80000001, PCIX0_POM0SA);
+
+        /* Setup 2GB PCI->PLB inbound memory window at 0, enable MSIs */
+        PCIX_WRITEL(0x00000000, PCIX0_PIM0LAH);
+        PCIX_WRITEL(0x00000000, PCIX0_PIM0LAL);
+        PCIX_WRITEL(0xe0000007, PCIX0_PIM0SA);
+
+        eieio();
+}
+
+static void __init
+ocotea_setup_hose(void)
+{
+        struct pci_controller *hose;
+
+        /* Configure windows on the PCI-X host bridge */
+        ocotea_setup_pcix();
+
+        hose = pcibios_alloc_controller();
+
+        if (!hose)
+                return;
+
+        hose->first_busno = 0;
+        hose->last_busno = 0xff;
+
+        hose->pci_mem_offset = OCOTEA_PCI_MEM_OFFSET;
+
+        pci_init_resource(&hose->io_resource,
+                        OCOTEA_PCI_LOWER_IO,
+                        OCOTEA_PCI_UPPER_IO,
+                        IORESOURCE_IO,
+                        "PCI host bridge");
+
+        pci_init_resource(&hose->mem_resources[0],
+                        OCOTEA_PCI_LOWER_MEM,
+                        OCOTEA_PCI_UPPER_MEM,
+                        IORESOURCE_MEM,
+                        "PCI host bridge");
+
+        hose->io_space.start = OCOTEA_PCI_LOWER_IO;
+        hose->io_space.end = OCOTEA_PCI_UPPER_IO;
+        hose->mem_space.start = OCOTEA_PCI_LOWER_MEM;
+        hose->mem_space.end = OCOTEA_PCI_UPPER_MEM;
+        isa_io_base =
+                (unsigned long)ioremap64(OCOTEA_PCI_IO_BASE, OCOTEA_PCI_IO_SIZE);
+        hose->io_base_virt = (void *)isa_io_base;
+
+        setup_indirect_pci(hose,
+                        OCOTEA_PCI_CFGA_PLB32,
+                        OCOTEA_PCI_CFGD_PLB32);
+        hose->set_cfg_type = 1;
+
+        hose->last_busno = pciauto_bus_scan(hose, hose->first_busno);
+
+        ppc_md.pci_swizzle = common_swizzle;
+        ppc_md.pci_map_irq = ocotea_map_irq;
+}
+
+
+TODC_ALLOC();
+
+static void __init
+ocotea_early_serial_map(void)
+{
+        struct uart_port port;
+
+        /* Setup ioremapped serial port access */
+        memset(&port, 0, sizeof(port));
+        port.membase = ioremap64(PPC440GX_UART0_ADDR, 8);
+        port.irq = UART0_INT;
+        port.uartclk = clocks.uart0;
+        port.regshift = 0;
+        port.iotype = SERIAL_IO_MEM;
+        port.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST;
+        port.line = 0;
+
+        if (early_serial_setup(&port) != 0) {
+                printk("Early serial init of port 0 failed\n");
+        }
+
+#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
+        /* Configure debug serial access */
+        gen550_init(0, &port);
+#endif
+
+        port.membase = ioremap64(PPC440GX_UART1_ADDR, 8);
+        port.irq = UART1_INT;
+        port.uartclk = clocks.uart1;
+        port.line = 1;
+
+        if (early_serial_setup(&port) != 0) {
+                printk("Early serial init of port 1 failed\n");
+        }
+
+#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
+        /* Configure debug serial access */
+        gen550_init(1, &port);
+#endif
+}
+
+static void __init
+ocotea_setup_arch(void)
+{
+        ocotea_set_emacdata();
+
+        ibm440gx_tah_enable();
+
+        /* Setup TODC access */
+        TODC_INIT(TODC_TYPE_DS1743,
+                        0,
+                        0,
+                        ioremap64(OCOTEA_RTC_ADDR, OCOTEA_RTC_SIZE),
+                        8);
+
+        /* init to some ~sane value until calibrate_delay() runs */
+        loops_per_jiffy = 50000000/HZ;
+
+        /* Setup PCI host bridge */
+        ocotea_setup_hose();
+
+#ifdef CONFIG_BLK_DEV_INITRD
+        if (initrd_start)
+                ROOT_DEV = Root_RAM0;
+        else
+#endif
+#ifdef CONFIG_ROOT_NFS
+                ROOT_DEV = Root_NFS;
+#else
+                ROOT_DEV = Root_HDA1;
+#endif
+
+        ocotea_early_serial_map();
+
+        /* Identify the system */
+        printk("IBM Ocotea port (MontaVista Software, Inc. <source@mvista.com>)\n");
+}
+
+static void __init ocotea_init(void)
+{
+        ibm440gx_l2c_setup(&clocks);
+}
+
+void __init platform_init(unsigned long r3, unsigned long r4,
+                unsigned long r5, unsigned long r6, unsigned long r7)
+{
+        parse_bootinfo(find_bootinfo());
+
+        /*
+         * If we were passed in a board information, copy it into the
+         * residual data area.
+         */
+        if (r3)
+                __res = *(bd_t *)(r3 + KERNELBASE);
+
+        /*
+         * Determine various clocks.
+         * To be completely correct we should get SysClk
+         * from FPGA, because it can be changed by on-board switches
+         * --ebs
+         */
+        ibm440gx_get_clocks(&clocks, 33333333, 6 * 1843200);
+        ocp_sys_info.opb_bus_freq = clocks.opb;
+
+        ibm44x_platform_init();
+
+        ppc_md.setup_arch = ocotea_setup_arch;
+        ppc_md.show_cpuinfo = ocotea_show_cpuinfo;
+        ppc_md.get_irq = NULL;          /* Set in ppc4xx_pic_init() */
+
+        ppc_md.calibrate_decr = ocotea_calibrate_decr;
+        ppc_md.time_init = todc_time_init;
+        ppc_md.set_rtc_time = todc_set_rtc_time;
+        ppc_md.get_rtc_time = todc_get_rtc_time;
+
+        ppc_md.nvram_read_val = todc_direct_read_val;
+        ppc_md.nvram_write_val = todc_direct_write_val;
+#ifdef CONFIG_KGDB
+        ppc_md.early_serial_map = ocotea_early_serial_map;
+#endif
+        ppc_md.init = ocotea_init;
+}