Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 440 insertions, 0 deletions

diff --git a/arch/ppc/kernel/cpu_setup_6xx.S b/arch/ppc/kernel/cpu_setup_6xx.S
new file mode 100644
index 000000000000..74f781b486a3
--- /dev/null
+++ b/arch/ppc/kernel/cpu_setup_6xx.S
@@ -0,0 +1,440 @@
+/*
+ * This file contains low level CPU setup functions.
+ *    Copyright (C) 2003 Benjamin Herrenschmidt (benh@kernel.crashing.org)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ */
+
+#include <linux/config.h>
+#include <asm/processor.h>
+#include <asm/page.h>
+#include <asm/ppc_asm.h>
+#include <asm/cputable.h>
+#include <asm/ppc_asm.h>
+#include <asm/offsets.h>
+#include <asm/cache.h>
+
+_GLOBAL(__setup_cpu_601)
+        blr
+_GLOBAL(__setup_cpu_603)
+        b       setup_common_caches
+_GLOBAL(__setup_cpu_604)
+        mflr    r4
+        bl      setup_common_caches
+        bl      setup_604_hid0
+        mtlr    r4
+        blr
+_GLOBAL(__setup_cpu_750)
+        mflr    r4
+        bl      setup_common_caches
+        bl      setup_750_7400_hid0
+        mtlr    r4
+        blr
+_GLOBAL(__setup_cpu_750cx)
+        mflr    r4
+        bl      setup_common_caches
+        bl      setup_750_7400_hid0
+        bl      setup_750cx
+        mtlr    r4
+        blr
+_GLOBAL(__setup_cpu_750fx)
+        mflr    r4
+        bl      setup_common_caches
+        bl      setup_750_7400_hid0
+        bl      setup_750fx
+        mtlr    r4
+        blr
+_GLOBAL(__setup_cpu_7400)
+        mflr    r4
+        bl      setup_7400_workarounds
+        bl      setup_common_caches
+        bl      setup_750_7400_hid0
+        mtlr    r4
+        blr
+_GLOBAL(__setup_cpu_7410)
+        mflr    r4
+        bl      setup_7410_workarounds
+        bl      setup_common_caches
+        bl      setup_750_7400_hid0
+        li      r3,0
+        mtspr   SPRN_L2CR2,r3
+        mtlr    r4
+        blr
+_GLOBAL(__setup_cpu_745x)
+        mflr    r4
+        bl      setup_common_caches
+        bl      setup_745x_specifics
+        mtlr    r4
+        blr
+
+/* Enable caches for 603's, 604, 750 & 7400 */
+setup_common_caches:
+        mfspr   r11,SPRN_HID0
+        andi.   r0,r11,HID0_DCE
+        ori     r11,r11,HID0_ICE|HID0_DCE
+        ori     r8,r11,HID0_ICFI
+        bne     1f                      /* don't invalidate the D-cache */
+        ori     r8,r8,HID0_DCI          /* unless it wasn't enabled */
+1:      sync
+        mtspr   SPRN_HID0,r8                    /* enable and invalidate caches */
+        sync
+        mtspr   SPRN_HID0,r11           /* enable caches */
+        sync
+        isync
+        blr
+
+/* 604, 604e, 604ev, ...
+ * Enable superscalar execution & branch history table
+ */
+setup_604_hid0:
+        mfspr   r11,SPRN_HID0
+        ori     r11,r11,HID0_SIED|HID0_BHTE
+        ori     r8,r11,HID0_BTCD
+        sync
+        mtspr   SPRN_HID0,r8    /* flush branch target address cache */
+        sync                    /* on 604e/604r */
+        mtspr   SPRN_HID0,r11
+        sync
+        isync
+        blr
+
+/* 7400 <= rev 2.7 and 7410 rev = 1.0 suffer from some
+ * erratas we work around here.
+ * Moto MPC710CE.pdf describes them, those are errata
+ * #3, #4 and #5
+ * Note that we assume the firmware didn't choose to
+ * apply other workarounds (there are other ones documented
+ * in the .pdf). It appear that Apple firmware only works
+ * around #3 and with the same fix we use. We may want to
+ * check if the CPU is using 60x bus mode in which case
+ * the workaround for errata #4 is useless. Also, we may
+ * want to explicitely clear HID0_NOPDST as this is not
+ * needed once we have applied workaround #5 (though it's
+ * not set by Apple's firmware at least).
+ */
+setup_7400_workarounds:
+        mfpvr   r3
+        rlwinm  r3,r3,0,20,31
+        cmpwi   0,r3,0x0207
+        ble     1f
+        blr
+setup_7410_workarounds:
+        mfpvr   r3
+        rlwinm  r3,r3,0,20,31
+        cmpwi   0,r3,0x0100
+        bnelr
+1:
+        mfspr   r11,SPRN_MSSSR0
+        /* Errata #3: Set L1OPQ_SIZE to 0x10 */
+        rlwinm  r11,r11,0,9,6
+        oris    r11,r11,0x0100
+        /* Errata #4: Set L2MQ_SIZE to 1 (check for MPX mode first ?) */
+        oris    r11,r11,0x0002
+        /* Errata #5: Set DRLT_SIZE to 0x01 */
+        rlwinm  r11,r11,0,5,2
+        oris    r11,r11,0x0800
+        sync
+        mtspr   SPRN_MSSSR0,r11
+        sync
+        isync
+        blr
+
+/* 740/750/7400/7410
+ * Enable Store Gathering (SGE), Address Brodcast (ABE),
+ * Branch History Table (BHTE), Branch Target ICache (BTIC)
+ * Dynamic Power Management (DPM), Speculative (SPD)
+ * Clear Instruction cache throttling (ICTC)
+ */
+setup_750_7400_hid0:
+        mfspr   r11,SPRN_HID0
+        ori     r11,r11,HID0_SGE | HID0_ABE | HID0_BHTE | HID0_BTIC
+BEGIN_FTR_SECTION
+        oris    r11,r11,HID0_DPM@h      /* enable dynamic power mgmt */
+END_FTR_SECTION_IFCLR(CPU_FTR_NO_DPM)
+        li      r3,HID0_SPD
+        andc    r11,r11,r3              /* clear SPD: enable speculative */
+        li      r3,0
+        mtspr   SPRN_ICTC,r3            /* Instruction Cache Throttling off */
+        isync
+        mtspr   SPRN_HID0,r11
+        sync
+        isync
+        blr
+
+/* 750cx specific
+ * Looks like we have to disable NAP feature for some PLL settings...
+ * (waiting for confirmation)
+ */
+setup_750cx:
+        mfspr   r10, SPRN_HID1
+        rlwinm  r10,r10,4,28,31
+        cmpwi   cr0,r10,7
+        cmpwi   cr1,r10,9
+        cmpwi   cr2,r10,11
+        cror    4*cr0+eq,4*cr0+eq,4*cr1+eq
+        cror    4*cr0+eq,4*cr0+eq,4*cr2+eq
+        bnelr
+        lwz     r6,CPU_SPEC_FEATURES(r5)
+        li      r7,CPU_FTR_CAN_NAP
+        andc    r6,r6,r7
+        stw     r6,CPU_SPEC_FEATURES(r5)
+        blr
+
+/* 750fx specific
+ */
+setup_750fx:
+        blr
+
+/* MPC 745x
+ * Enable Store Gathering (SGE), Branch Folding (FOLD)
+ * Branch History Table (BHTE), Branch Target ICache (BTIC)
+ * Dynamic Power Management (DPM), Speculative (SPD)
+ * Ensure our data cache instructions really operate.
+ * Timebase has to be running or we wouldn't have made it here,
+ * just ensure we don't disable it.
+ * Clear Instruction cache throttling (ICTC)
+ * Enable L2 HW prefetch
+ */
+setup_745x_specifics:
+        /* We check for the presence of an L3 cache setup by
+         * the firmware. If any, we disable NAP capability as
+         * it's known to be bogus on rev 2.1 and earlier
+         */
+        mfspr   r11,SPRN_L3CR
+        andis.  r11,r11,L3CR_L3E@h
+        beq     1f
+        lwz     r6,CPU_SPEC_FEATURES(r5)
+        andi.   r0,r6,CPU_FTR_L3_DISABLE_NAP
+        beq     1f
+        li      r7,CPU_FTR_CAN_NAP
+        andc    r6,r6,r7
+        stw     r6,CPU_SPEC_FEATURES(r5)
+1:
+        mfspr   r11,SPRN_HID0
+
+        /* All of the bits we have to set.....
+         */
+        ori     r11,r11,HID0_SGE | HID0_FOLD | HID0_BHTE | HID0_LRSTK | HID0_BTIC
+BEGIN_FTR_SECTION
+        xori    r11,r11,HID0_BTIC
+END_FTR_SECTION_IFSET(CPU_FTR_NO_BTIC)
+BEGIN_FTR_SECTION
+        oris    r11,r11,HID0_DPM@h      /* enable dynamic power mgmt */
+END_FTR_SECTION_IFCLR(CPU_FTR_NO_DPM)
+
+        /* All of the bits we have to clear....
+         */
+        li      r3,HID0_SPD | HID0_NOPDST | HID0_NOPTI
+        andc    r11,r11,r3              /* clear SPD: enable speculative */
+        li      r3,0
+
+        mtspr   SPRN_ICTC,r3            /* Instruction Cache Throttling off */
+        isync
+        mtspr   SPRN_HID0,r11
+        sync
+        isync
+
+        /* Enable L2 HW prefetch
+         */
+        mfspr   r3,SPRN_MSSCR0
+        ori     r3,r3,3
+        sync
+        mtspr   SPRN_MSSCR0,r3
+        sync
+        isync
+        blr
+
+/* Definitions for the table use to save CPU states */
+#define CS_HID0         0
+#define CS_HID1         4
+#define CS_HID2         8
+#define CS_MSSCR0       12
+#define CS_MSSSR0       16
+#define CS_ICTRL        20
+#define CS_LDSTCR       24
+#define CS_LDSTDB       28
+#define CS_SIZE         32
+
+        .data
+        .balign L1_CACHE_LINE_SIZE
+cpu_state_storage:
+        .space  CS_SIZE
+        .balign L1_CACHE_LINE_SIZE,0
+        .text
+
+/* Called in normal context to backup CPU 0 state. This
+ * does not include cache settings. This function is also
+ * called for machine sleep. This does not include the MMU
+ * setup, BATs, etc... but rather the "special" registers
+ * like HID0, HID1, MSSCR0, etc...
+ */
+_GLOBAL(__save_cpu_setup)
+        /* Some CR fields are volatile, we back it up all */
+        mfcr    r7
+
+        /* Get storage ptr */
+        lis     r5,cpu_state_storage@h
+        ori     r5,r5,cpu_state_storage@l
+
+        /* Save HID0 (common to all CONFIG_6xx cpus) */
+        mfspr   r3,SPRN_HID0
+        stw     r3,CS_HID0(r5)
+
+        /* Now deal with CPU type dependent registers */
+        mfspr   r3,SPRN_PVR
+        srwi    r3,r3,16
+        cmplwi  cr0,r3,0x8000   /* 7450 */
+        cmplwi  cr1,r3,0x000c   /* 7400 */
+        cmplwi  cr2,r3,0x800c   /* 7410 */
+        cmplwi  cr3,r3,0x8001   /* 7455 */
+        cmplwi  cr4,r3,0x8002   /* 7457 */
+        cmplwi  cr5,r3,0x8003   /* 7447A */
+        cmplwi  cr6,r3,0x7000   /* 750FX */
+        /* cr1 is 7400 || 7410 */
+        cror    4*cr1+eq,4*cr1+eq,4*cr2+eq
+        /* cr0 is 74xx */
+        cror    4*cr0+eq,4*cr0+eq,4*cr3+eq
+        cror    4*cr0+eq,4*cr0+eq,4*cr4+eq
+        cror    4*cr0+eq,4*cr0+eq,4*cr1+eq
+        cror    4*cr0+eq,4*cr0+eq,4*cr5+eq
+        bne     1f
+        /* Backup 74xx specific regs */
+        mfspr   r4,SPRN_MSSCR0
+        stw     r4,CS_MSSCR0(r5)
+        mfspr   r4,SPRN_MSSSR0
+        stw     r4,CS_MSSSR0(r5)
+        beq     cr1,1f
+        /* Backup 745x specific registers */
+        mfspr   r4,SPRN_HID1
+        stw     r4,CS_HID1(r5)
+        mfspr   r4,SPRN_ICTRL
+        stw     r4,CS_ICTRL(r5)
+        mfspr   r4,SPRN_LDSTCR
+        stw     r4,CS_LDSTCR(r5)
+        mfspr   r4,SPRN_LDSTDB
+        stw     r4,CS_LDSTDB(r5)
+1:
+        bne     cr6,1f
+        /* Backup 750FX specific registers */
+        mfspr   r4,SPRN_HID1
+        stw     r4,CS_HID1(r5)
+        /* If rev 2.x, backup HID2 */
+        mfspr   r3,SPRN_PVR
+        andi.   r3,r3,0xff00
+        cmpwi   cr0,r3,0x0200
+        bne     1f
+        mfspr   r4,SPRN_HID2
+        stw     r4,CS_HID2(r5)
+1:
+        mtcr    r7
+        blr
+
+/* Called with no MMU context (typically MSR:IR/DR off) to
+ * restore CPU state as backed up by the previous
+ * function. This does not include cache setting
+ */
+_GLOBAL(__restore_cpu_setup)
+        /* Some CR fields are volatile, we back it up all */
+        mfcr    r7
+
+        /* Get storage ptr */
+        lis     r5,(cpu_state_storage-KERNELBASE)@h
+        ori     r5,r5,cpu_state_storage@l
+
+        /* Restore HID0 */
+        lwz     r3,CS_HID0(r5)
+        sync
+        isync
+        mtspr   SPRN_HID0,r3
+        sync
+        isync
+
+        /* Now deal with CPU type dependent registers */
+        mfspr   r3,SPRN_PVR
+        srwi    r3,r3,16
+        cmplwi  cr0,r3,0x8000   /* 7450 */
+        cmplwi  cr1,r3,0x000c   /* 7400 */
+        cmplwi  cr2,r3,0x800c   /* 7410 */
+        cmplwi  cr3,r3,0x8001   /* 7455 */
+        cmplwi  cr4,r3,0x8002   /* 7457 */
+        cmplwi  cr5,r3,0x8003   /* 7447A */
+        cmplwi  cr6,r3,0x7000   /* 750FX */
+        /* cr1 is 7400 || 7410 */
+        cror    4*cr1+eq,4*cr1+eq,4*cr2+eq
+        /* cr0 is 74xx */
+        cror    4*cr0+eq,4*cr0+eq,4*cr3+eq
+        cror    4*cr0+eq,4*cr0+eq,4*cr4+eq
+        cror    4*cr0+eq,4*cr0+eq,4*cr1+eq
+        cror    4*cr0+eq,4*cr0+eq,4*cr5+eq
+        bne     2f
+        /* Restore 74xx specific regs */
+        lwz     r4,CS_MSSCR0(r5)
+        sync
+        mtspr   SPRN_MSSCR0,r4
+        sync
+        isync
+        lwz     r4,CS_MSSSR0(r5)
+        sync
+        mtspr   SPRN_MSSSR0,r4
+        sync
+        isync
+        bne     cr2,1f
+        /* Clear 7410 L2CR2 */
+        li      r4,0
+        mtspr   SPRN_L2CR2,r4
+1:      beq     cr1,2f
+        /* Restore 745x specific registers */
+        lwz     r4,CS_HID1(r5)
+        sync
+        mtspr   SPRN_HID1,r4
+        isync
+        sync
+        lwz     r4,CS_ICTRL(r5)
+        sync
+        mtspr   SPRN_ICTRL,r4
+        isync
+        sync
+        lwz     r4,CS_LDSTCR(r5)
+        sync
+        mtspr   SPRN_LDSTCR,r4
+        isync
+        sync
+        lwz     r4,CS_LDSTDB(r5)
+        sync
+        mtspr   SPRN_LDSTDB,r4
+        isync
+        sync
+2:      bne     cr6,1f
+        /* Restore 750FX specific registers
+         * that is restore HID2 on rev 2.x and PLL config & switch
+         * to PLL 0 on all
+         */
+        /* If rev 2.x, restore HID2 with low voltage bit cleared */
+        mfspr   r3,SPRN_PVR
+        andi.   r3,r3,0xff00
+        cmpwi   cr0,r3,0x0200
+        bne     4f
+        lwz     r4,CS_HID2(r5)
+        rlwinm  r4,r4,0,19,17
+        mtspr   SPRN_HID2,r4
+        sync
+4:
+        lwz     r4,CS_HID1(r5)
+        rlwinm  r5,r4,0,16,14
+        mtspr   SPRN_HID1,r5
+                /* Wait for PLL to stabilize */
+        mftbl   r5
+3:      mftbl   r6
+        sub     r6,r6,r5
+        cmplwi  cr0,r6,10000
+        ble     3b
+        /* Setup final PLL */
+        mtspr   SPRN_HID1,r4
+1:
+        mtcr    r7
+        blr
+