[POWERPC] Move iSeries startup code out of head_64.S

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>

3 files changed, 117 insertions, 84 deletions

diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S
index 1e6d9cc06ca0..97f089b30316 100644
--- a/arch/powerpc/kernel/head_64.S
+++ b/arch/powerpc/kernel/head_64.S
@@ -802,56 +802,6 @@ system_call_iSeries:
         STD_EXCEPTION_ISERIES( 0xe00, trap_0e, PACA_EXGEN)
         STD_EXCEPTION_ISERIES( 0xf00, performance_monitor, PACA_EXGEN)
 
-        .globl system_reset_iSeries
-system_reset_iSeries:
-        mfspr   r13,SPRN_SPRG3          /* Get paca address */
-        mfmsr   r24
-        ori     r24,r24,MSR_RI
-        mtmsrd  r24                     /* RI on */
-        lhz     r24,PACAPACAINDEX(r13)  /* Get processor # */
-        cmpwi   0,r24,0                 /* Are we processor 0? */
-        bne     1f
-        b       .__start_initialization_iSeries /* Start up the first processor */
-1:      mfspr   r4,SPRN_CTRLF
-        li      r5,CTRL_RUNLATCH        /* Turn off the run light */
-        andc    r4,r4,r5
-        mtspr   SPRN_CTRLT,r4
-
-1:
-        HMT_LOW
-#ifdef CONFIG_SMP
-        lbz     r23,PACAPROCSTART(r13)  /* Test if this processor
-                                         * should start */
-        sync
-        LOAD_REG_IMMEDIATE(r3,current_set)
-        sldi    r28,r24,3               /* get current_set[cpu#] */
-        ldx     r3,r3,r28
-        addi    r1,r3,THREAD_SIZE
-        subi    r1,r1,STACK_FRAME_OVERHEAD
-
-        cmpwi   0,r23,0
-        beq     iSeries_secondary_smp_loop      /* Loop until told to go */
-        bne     __secondary_start               /* Loop until told to go */
-iSeries_secondary_smp_loop:
-        /* Let the Hypervisor know we are alive */
-        /* 8002 is a call to HvCallCfg::getLps, a harmless Hypervisor function */
-        lis     r3,0x8002
-        rldicr  r3,r3,32,15             /* r0 = (r3 << 32) & 0xffff000000000000 */
-#else /* CONFIG_SMP */
-        /* Yield the processor.  This is required for non-SMP kernels
-                which are running on multi-threaded machines. */
-        lis     r3,0x8000
-        rldicr  r3,r3,32,15             /* r3 = (r3 << 32) & 0xffff000000000000 */
-        addi    r3,r3,18                /* r3 = 0x8000000000000012 which is "yield" */
-        li      r4,0                    /* "yield timed" */
-        li      r5,-1                   /* "yield forever" */
-#endif /* CONFIG_SMP */
-        li      r0,-1                   /* r0=-1 indicates a Hypervisor call */
-        sc                              /* Invoke the hypervisor via a system call */
-        mfspr   r13,SPRN_SPRG3          /* Put r13 back ???? */
-        b       1b                      /* If SMP not configured, secondaries
-                                         * loop forever */
-
 decrementer_iSeries_masked:
         /* We may not have a valid TOC pointer in here. */
         li      r11,1
@@ -1622,39 +1572,6 @@ _GLOBAL(generic_secondary_smp_init)
         b       __secondary_start
 #endif
 
-#ifdef CONFIG_PPC_ISERIES
-_INIT_STATIC(__start_initialization_iSeries)
-        /* Clear out the BSS */
-        LOAD_REG_IMMEDIATE(r11,__bss_stop)
-        LOAD_REG_IMMEDIATE(r8,__bss_start)
-        sub     r11,r11,r8              /* bss size                     */
-        addi    r11,r11,7               /* round up to an even double word */
-        rldicl. r11,r11,61,3            /* shift right by 3             */
-        beq     4f
-        addi    r8,r8,-8
-        li      r0,0
-        mtctr   r11                     /* zero this many doublewords   */
-3:      stdu    r0,8(r8)
-        bdnz    3b
-4:
-        LOAD_REG_IMMEDIATE(r1,init_thread_union)
-        addi    r1,r1,THREAD_SIZE
-        li      r0,0
-        stdu    r0,-STACK_FRAME_OVERHEAD(r1)
-
-        LOAD_REG_IMMEDIATE(r2,__toc_start)
-        addi    r2,r2,0x4000
-        addi    r2,r2,0x4000
-
-        bl      .iSeries_early_setup
-        bl      .early_setup
-
-        /* relocation is on at this point */
-
-        b       .start_here_common
-#endif /* CONFIG_PPC_ISERIES */
-
-
 _STATIC(__mmu_off)
         mfmsr   r3
         andi.   r0,r3,MSR_IR|MSR_DR
@@ -1902,6 +1819,7 @@ _GLOBAL(pmac_secondary_start)
  *   r13   = paca virtual address
  *   SPRG3 = paca virtual address
  */
+        .globl  __secondary_start
 __secondary_start:
         /* Set thread priority to MEDIUM */
         HMT_MEDIUM
@@ -2032,7 +1950,7 @@ _INIT_STATIC(start_here_multiplatform)
         b       .       /* prevent speculative execution */
         
         /* This is where all platforms converge execution */
-_INIT_STATIC(start_here_common)
+_INIT_GLOBAL(start_here_common)
         /* relocation is on at this point */
 
         /* The following code sets up the SP and TOC now that we are */
diff --git a/arch/powerpc/platforms/iseries/Makefile b/arch/powerpc/platforms/iseries/Makefile
index 13ac3015d91c..60db509638f1 100644
--- a/arch/powerpc/platforms/iseries/Makefile
+++ b/arch/powerpc/platforms/iseries/Makefile
@@ -2,6 +2,7 @@ EXTRA_CFLAGS	+= -mno-minimal-toc
 
 extra-y += dt.o
 
+obj-y += exception.o
 obj-y += hvlog.o hvlpconfig.o lpardata.o setup.o dt_mod.o mf.o lpevents.o \
         hvcall.o proc.o htab.o iommu.o misc.o irq.o
 obj-$(CONFIG_PCI) += pci.o vpdinfo.o
diff --git a/arch/powerpc/platforms/iseries/exception.S b/arch/powerpc/platforms/iseries/exception.S
new file mode 100644
index 000000000000..b6e2f8c0b093
--- /dev/null
+++ b/arch/powerpc/platforms/iseries/exception.S
@@ -0,0 +1,114 @@
+/*
+ *  Low level routines for legacy iSeries support.
+ *
+ *  Extracted from head_64.S
+ *
+ *  PowerPC version
+ *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
+ *
+ *  Rewritten by Cort Dougan (cort@cs.nmt.edu) for PReP
+ *    Copyright (C) 1996 Cort Dougan <cort@cs.nmt.edu>
+ *  Adapted for Power Macintosh by Paul Mackerras.
+ *  Low-level exception handlers and MMU support
+ *  rewritten by Paul Mackerras.
+ *    Copyright (C) 1996 Paul Mackerras.
+ *
+ *  Adapted for 64bit PowerPC by Dave Engebretsen, Peter Bergner, and
+ *    Mike Corrigan {engebret|bergner|mikejc}@us.ibm.com
+ *
+ *  This file contains the low-level support and setup for the
+ *  PowerPC-64 platform, including trap and interrupt dispatch.
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ */
+
+#include <asm/reg.h>
+#include <asm/ppc_asm.h>
+#include <asm/asm-offsets.h>
+#include <asm/thread_info.h>
+#include <asm/ptrace.h>
+
+        .text
+
+        .globl system_reset_iSeries
+system_reset_iSeries:
+        mfspr   r13,SPRN_SPRG3          /* Get paca address */
+        mfmsr   r24
+        ori     r24,r24,MSR_RI
+        mtmsrd  r24                     /* RI on */
+        lhz     r24,PACAPACAINDEX(r13)  /* Get processor # */
+        cmpwi   0,r24,0                 /* Are we processor 0? */
+        bne     1f
+        b       .__start_initialization_iSeries /* Start up the first processor */
+1:      mfspr   r4,SPRN_CTRLF
+        li      r5,CTRL_RUNLATCH        /* Turn off the run light */
+        andc    r4,r4,r5
+        mtspr   SPRN_CTRLT,r4
+
+1:
+        HMT_LOW
+#ifdef CONFIG_SMP
+        lbz     r23,PACAPROCSTART(r13)  /* Test if this processor
+                                         * should start */
+        sync
+        LOAD_REG_IMMEDIATE(r3,current_set)
+        sldi    r28,r24,3               /* get current_set[cpu#] */
+        ldx     r3,r3,r28
+        addi    r1,r3,THREAD_SIZE
+        subi    r1,r1,STACK_FRAME_OVERHEAD
+
+        cmpwi   0,r23,0
+        beq     iSeries_secondary_smp_loop      /* Loop until told to go */
+        b       __secondary_start               /* Loop until told to go */
+iSeries_secondary_smp_loop:
+        /* Let the Hypervisor know we are alive */
+        /* 8002 is a call to HvCallCfg::getLps, a harmless Hypervisor function */
+        lis     r3,0x8002
+        rldicr  r3,r3,32,15             /* r0 = (r3 << 32) & 0xffff000000000000 */
+#else /* CONFIG_SMP */
+        /* Yield the processor.  This is required for non-SMP kernels
+                which are running on multi-threaded machines. */
+        lis     r3,0x8000
+        rldicr  r3,r3,32,15             /* r3 = (r3 << 32) & 0xffff000000000000 */
+        addi    r3,r3,18                /* r3 = 0x8000000000000012 which is "yield" */
+        li      r4,0                    /* "yield timed" */
+        li      r5,-1                   /* "yield forever" */
+#endif /* CONFIG_SMP */
+        li      r0,-1                   /* r0=-1 indicates a Hypervisor call */
+        sc                              /* Invoke the hypervisor via a system call */
+        mfspr   r13,SPRN_SPRG3          /* Put r13 back ???? */
+        b       1b                      /* If SMP not configured, secondaries
+                                         * loop forever */
+
+_INIT_STATIC(__start_initialization_iSeries)
+        /* Clear out the BSS */
+        LOAD_REG_IMMEDIATE(r11,__bss_stop)
+        LOAD_REG_IMMEDIATE(r8,__bss_start)
+        sub     r11,r11,r8              /* bss size                     */
+        addi    r11,r11,7               /* round up to an even double word */
+        rldicl. r11,r11,61,3            /* shift right by 3             */
+        beq     4f
+        addi    r8,r8,-8
+        li      r0,0
+        mtctr   r11                     /* zero this many doublewords   */
+3:      stdu    r0,8(r8)
+        bdnz    3b
+4:
+        LOAD_REG_IMMEDIATE(r1,init_thread_union)
+        addi    r1,r1,THREAD_SIZE
+        li      r0,0
+        stdu    r0,-STACK_FRAME_OVERHEAD(r1)
+
+        LOAD_REG_IMMEDIATE(r2,__toc_start)
+        addi    r2,r2,0x4000
+        addi    r2,r2,0x4000
+
+        bl      .iSeries_early_setup
+        bl      .early_setup
+
+        /* relocation is on at this point */
+
+        b       .start_here_common