powerpc/mpc5200: Don't touch pipelining for MPC5200B

MPC5200 needs to have pipelining disabled for ATA to work. MPC5200B does not.
So, for the latter, don't touch the original setting from the bootloader.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

1 files changed, 5 insertions, 2 deletions

diff --git a/arch/powerpc/platforms/52xx/mpc52xx_common.c b/arch/powerpc/platforms/52xx/mpc52xx_common.c
index 044b4e6e8743..ae7c34f37e1c 100644
--- a/arch/powerpc/platforms/52xx/mpc52xx_common.c
+++ b/arch/powerpc/platforms/52xx/mpc52xx_common.c
@@ -99,11 +99,14 @@ mpc5200_setup_xlb_arbiter(void)
         out_be32(&xlb->master_pri_enable, 0xff);
         out_be32(&xlb->master_priority, 0x11111111);
 
-        /* Disable XLB pipelining
+        /*
+         * Disable XLB pipelining
          * (cfr errate 292. We could do this only just before ATA PIO
          *  transaction and re-enable it afterwards ...)
+         * Not needed on MPC5200B.
          */
-        out_be32(&xlb->config, in_be32(&xlb->config) | MPC52xx_XLB_CFG_PLDIS);
+        if ((mfspr(SPRN_SVR) & MPC5200_SVR_MASK) == MPC5200_SVR)
+                out_be32(&xlb->config, in_be32(&xlb->config) | MPC52xx_XLB_CFG_PLDIS);
 
         iounmap(xlb);
 }