diff options
author | Benjamin Herrenschmidt <benh@kernel.crashing.org> | 2008-10-13 19:11:38 -0400 |
---|---|---|
committer | Benjamin Herrenschmidt <benh@kernel.crashing.org> | 2008-10-13 19:11:38 -0400 |
commit | 1263965f298af611d4992165242202eb194db1c1 (patch) | |
tree | 625cbd9be60127a70619833e4e5f25a349d228da /arch/powerpc | |
parent | 5006d1aae813727cc77cc56cca9e90ef748650ce (diff) | |
parent | c0da99d5f7b0349cb11f970b3283c0d57beb5ec9 (diff) |
Merge commit 'kumar/kumar-next'
Diffstat (limited to 'arch/powerpc')
60 files changed, 614 insertions, 166 deletions
diff --git a/arch/powerpc/boot/dts/gef_sbc610.dts b/arch/powerpc/boot/dts/gef_sbc610.dts index 80b79e4adc78..6ed608322ddc 100644 --- a/arch/powerpc/boot/dts/gef_sbc610.dts +++ b/arch/powerpc/boot/dts/gef_sbc610.dts | |||
@@ -67,6 +67,39 @@ | |||
67 | reg = <0x0 0x40000000>; // set by uboot | 67 | reg = <0x0 0x40000000>; // set by uboot |
68 | }; | 68 | }; |
69 | 69 | ||
70 | localbus@fef05000 { | ||
71 | #address-cells = <2>; | ||
72 | #size-cells = <1>; | ||
73 | compatible = "fsl,mpc8641-localbus", "simple-bus"; | ||
74 | reg = <0xf8005000 0x1000>; | ||
75 | interrupts = <19 2>; | ||
76 | interrupt-parent = <&mpic>; | ||
77 | |||
78 | ranges = <0 0 0xff000000 0x01000000 // 16MB Boot flash | ||
79 | 1 0 0xe8000000 0x08000000 // Paged Flash 0 | ||
80 | 2 0 0xe0000000 0x08000000 // Paged Flash 1 | ||
81 | 3 0 0xfc100000 0x00020000 // NVRAM | ||
82 | 4 0 0xfc000000 0x00008000 // FPGA | ||
83 | 5 0 0xfc008000 0x00008000 // AFIX FPGA | ||
84 | 6 0 0xfd000000 0x00800000 // IO FPGA (8-bit) | ||
85 | 7 0 0xfd800000 0x00800000>; // IO FPGA (32-bit) | ||
86 | |||
87 | fpga@4,0 { | ||
88 | compatible = "gef,fpga-regs"; | ||
89 | reg = <0x4 0x0 0x40>; | ||
90 | }; | ||
91 | gef_pic: pic@4,4000 { | ||
92 | #interrupt-cells = <1>; | ||
93 | interrupt-controller; | ||
94 | compatible = "gef,fpga-pic"; | ||
95 | reg = <0x4 0x4000 0x20>; | ||
96 | interrupts = <0x8 | ||
97 | 0x9>; | ||
98 | interrupt-parent = <&mpic>; | ||
99 | |||
100 | }; | ||
101 | }; | ||
102 | |||
70 | soc@fef00000 { | 103 | soc@fef00000 { |
71 | #address-cells = <1>; | 104 | #address-cells = <1>; |
72 | #size-cells = <1>; | 105 | #size-cells = <1>; |
@@ -150,13 +183,13 @@ | |||
150 | reg = <0x24520 0x20>; | 183 | reg = <0x24520 0x20>; |
151 | 184 | ||
152 | phy0: ethernet-phy@0 { | 185 | phy0: ethernet-phy@0 { |
153 | interrupt-parent = <&mpic>; | 186 | interrupt-parent = <&gef_pic>; |
154 | interrupts = <0x0 0x1>; | 187 | interrupts = <0x9 0x4>; |
155 | reg = <1>; | 188 | reg = <1>; |
156 | }; | 189 | }; |
157 | phy2: ethernet-phy@2 { | 190 | phy2: ethernet-phy@2 { |
158 | interrupt-parent = <&mpic>; | 191 | interrupt-parent = <&gef_pic>; |
159 | interrupts = <0x0 0x1>; | 192 | interrupts = <0x8 0x4>; |
160 | reg = <3>; | 193 | reg = <3>; |
161 | }; | 194 | }; |
162 | }; | 195 | }; |
diff --git a/arch/powerpc/boot/dts/mpc5121ads.dts b/arch/powerpc/boot/dts/mpc5121ads.dts index 1f9036c317b4..c2b8dbfab79e 100644 --- a/arch/powerpc/boot/dts/mpc5121ads.dts +++ b/arch/powerpc/boot/dts/mpc5121ads.dts | |||
@@ -403,7 +403,8 @@ | |||
403 | #interrupt-cells = <1>; | 403 | #interrupt-cells = <1>; |
404 | #size-cells = <2>; | 404 | #size-cells = <2>; |
405 | #address-cells = <3>; | 405 | #address-cells = <3>; |
406 | reg = <0x80008500 0x100>; | 406 | reg = <0x80008500 0x100 /* internal registers */ |
407 | 0x80008300 0x8>; /* config space access registers */ | ||
407 | compatible = "fsl,mpc5121-pci"; | 408 | compatible = "fsl,mpc5121-pci"; |
408 | device_type = "pci"; | 409 | device_type = "pci"; |
409 | }; | 410 | }; |
diff --git a/arch/powerpc/boot/dts/mpc8313erdb.dts b/arch/powerpc/boot/dts/mpc8313erdb.dts index 539085591e04..747f27676332 100644 --- a/arch/powerpc/boot/dts/mpc8313erdb.dts +++ b/arch/powerpc/boot/dts/mpc8313erdb.dts | |||
@@ -363,7 +363,8 @@ | |||
363 | #interrupt-cells = <1>; | 363 | #interrupt-cells = <1>; |
364 | #size-cells = <2>; | 364 | #size-cells = <2>; |
365 | #address-cells = <3>; | 365 | #address-cells = <3>; |
366 | reg = <0xe0008500 0x100>; | 366 | reg = <0xe0008500 0x100 /* internal registers */ |
367 | 0xe0008300 0x8>; /* config space access registers */ | ||
367 | compatible = "fsl,mpc8349-pci"; | 368 | compatible = "fsl,mpc8349-pci"; |
368 | device_type = "pci"; | 369 | device_type = "pci"; |
369 | }; | 370 | }; |
diff --git a/arch/powerpc/boot/dts/mpc8315erdb.dts b/arch/powerpc/boot/dts/mpc8315erdb.dts index 94c9b4107a1d..7449e54c1a90 100644 --- a/arch/powerpc/boot/dts/mpc8315erdb.dts +++ b/arch/powerpc/boot/dts/mpc8315erdb.dts | |||
@@ -318,7 +318,8 @@ | |||
318 | #interrupt-cells = <1>; | 318 | #interrupt-cells = <1>; |
319 | #size-cells = <2>; | 319 | #size-cells = <2>; |
320 | #address-cells = <3>; | 320 | #address-cells = <3>; |
321 | reg = <0xe0008500 0x100>; | 321 | reg = <0xe0008500 0x100 /* internal registers */ |
322 | 0xe0008300 0x8>; /* config space access registers */ | ||
322 | compatible = "fsl,mpc8349-pci"; | 323 | compatible = "fsl,mpc8349-pci"; |
323 | device_type = "pci"; | 324 | device_type = "pci"; |
324 | }; | 325 | }; |
diff --git a/arch/powerpc/boot/dts/mpc832x_mds.dts b/arch/powerpc/boot/dts/mpc832x_mds.dts index 015808ae1026..e4cc1768f241 100644 --- a/arch/powerpc/boot/dts/mpc832x_mds.dts +++ b/arch/powerpc/boot/dts/mpc832x_mds.dts | |||
@@ -423,7 +423,8 @@ | |||
423 | #interrupt-cells = <1>; | 423 | #interrupt-cells = <1>; |
424 | #size-cells = <2>; | 424 | #size-cells = <2>; |
425 | #address-cells = <3>; | 425 | #address-cells = <3>; |
426 | reg = <0xe0008500 0x100>; | 426 | reg = <0xe0008500 0x100 /* internal registers */ |
427 | 0xe0008300 0x8>; /* config space access registers */ | ||
427 | compatible = "fsl,mpc8349-pci"; | 428 | compatible = "fsl,mpc8349-pci"; |
428 | device_type = "pci"; | 429 | device_type = "pci"; |
429 | }; | 430 | }; |
diff --git a/arch/powerpc/boot/dts/mpc832x_rdb.dts b/arch/powerpc/boot/dts/mpc832x_rdb.dts index b5b0ec2eb88f..226ff066652b 100644 --- a/arch/powerpc/boot/dts/mpc832x_rdb.dts +++ b/arch/powerpc/boot/dts/mpc832x_rdb.dts | |||
@@ -331,7 +331,8 @@ | |||
331 | #interrupt-cells = <1>; | 331 | #interrupt-cells = <1>; |
332 | #size-cells = <2>; | 332 | #size-cells = <2>; |
333 | #address-cells = <3>; | 333 | #address-cells = <3>; |
334 | reg = <0xe0008500 0x100>; | 334 | reg = <0xe0008500 0x100 /* internal registers */ |
335 | 0xe0008300 0x8>; /* config space access registers */ | ||
335 | compatible = "fsl,mpc8349-pci"; | 336 | compatible = "fsl,mpc8349-pci"; |
336 | device_type = "pci"; | 337 | device_type = "pci"; |
337 | }; | 338 | }; |
diff --git a/arch/powerpc/boot/dts/mpc8349emitx.dts b/arch/powerpc/boot/dts/mpc8349emitx.dts index 1327a61d0538..5cedf373a1d8 100644 --- a/arch/powerpc/boot/dts/mpc8349emitx.dts +++ b/arch/powerpc/boot/dts/mpc8349emitx.dts | |||
@@ -254,7 +254,8 @@ | |||
254 | #interrupt-cells = <1>; | 254 | #interrupt-cells = <1>; |
255 | #size-cells = <2>; | 255 | #size-cells = <2>; |
256 | #address-cells = <3>; | 256 | #address-cells = <3>; |
257 | reg = <0xe0008500 0x100>; | 257 | reg = <0xe0008500 0x100 /* internal registers */ |
258 | 0xe0008300 0x8>; /* config space access registers */ | ||
258 | compatible = "fsl,mpc8349-pci"; | 259 | compatible = "fsl,mpc8349-pci"; |
259 | device_type = "pci"; | 260 | device_type = "pci"; |
260 | }; | 261 | }; |
@@ -280,7 +281,8 @@ | |||
280 | #interrupt-cells = <1>; | 281 | #interrupt-cells = <1>; |
281 | #size-cells = <2>; | 282 | #size-cells = <2>; |
282 | #address-cells = <3>; | 283 | #address-cells = <3>; |
283 | reg = <0xe0008600 0x100>; | 284 | reg = <0xe0008600 0x100 /* internal registers */ |
285 | 0xe0008380 0x8>; /* config space access registers */ | ||
284 | compatible = "fsl,mpc8349-pci"; | 286 | compatible = "fsl,mpc8349-pci"; |
285 | device_type = "pci"; | 287 | device_type = "pci"; |
286 | }; | 288 | }; |
diff --git a/arch/powerpc/boot/dts/mpc8349emitxgp.dts b/arch/powerpc/boot/dts/mpc8349emitxgp.dts index f70d3a0a6eb9..81ae1d3e9440 100644 --- a/arch/powerpc/boot/dts/mpc8349emitxgp.dts +++ b/arch/powerpc/boot/dts/mpc8349emitxgp.dts | |||
@@ -228,7 +228,8 @@ | |||
228 | #interrupt-cells = <1>; | 228 | #interrupt-cells = <1>; |
229 | #size-cells = <2>; | 229 | #size-cells = <2>; |
230 | #address-cells = <3>; | 230 | #address-cells = <3>; |
231 | reg = <0xe0008600 0x100>; | 231 | reg = <0xe0008600 0x100 /* internal registers */ |
232 | 0xe0008380 0x8>; /* config space access registers */ | ||
232 | compatible = "fsl,mpc8349-pci"; | 233 | compatible = "fsl,mpc8349-pci"; |
233 | device_type = "pci"; | 234 | device_type = "pci"; |
234 | }; | 235 | }; |
diff --git a/arch/powerpc/boot/dts/mpc834x_mds.dts b/arch/powerpc/boot/dts/mpc834x_mds.dts index e29739eee35e..04bfde3ea605 100644 --- a/arch/powerpc/boot/dts/mpc834x_mds.dts +++ b/arch/powerpc/boot/dts/mpc834x_mds.dts | |||
@@ -315,7 +315,8 @@ | |||
315 | #interrupt-cells = <1>; | 315 | #interrupt-cells = <1>; |
316 | #size-cells = <2>; | 316 | #size-cells = <2>; |
317 | #address-cells = <3>; | 317 | #address-cells = <3>; |
318 | reg = <0xe0008500 0x100>; | 318 | reg = <0xe0008500 0x100 /* internal registers */ |
319 | 0xe0008300 0x8>; /* config space access registers */ | ||
319 | compatible = "fsl,mpc8349-pci"; | 320 | compatible = "fsl,mpc8349-pci"; |
320 | device_type = "pci"; | 321 | device_type = "pci"; |
321 | }; | 322 | }; |
@@ -376,7 +377,8 @@ | |||
376 | #interrupt-cells = <1>; | 377 | #interrupt-cells = <1>; |
377 | #size-cells = <2>; | 378 | #size-cells = <2>; |
378 | #address-cells = <3>; | 379 | #address-cells = <3>; |
379 | reg = <0xe0008600 0x100>; | 380 | reg = <0xe0008600 0x100 /* internal registers */ |
381 | 0xe0008380 0x8>; /* config space access registers */ | ||
380 | compatible = "fsl,mpc8349-pci"; | 382 | compatible = "fsl,mpc8349-pci"; |
381 | device_type = "pci"; | 383 | device_type = "pci"; |
382 | }; | 384 | }; |
diff --git a/arch/powerpc/boot/dts/mpc836x_mds.dts b/arch/powerpc/boot/dts/mpc836x_mds.dts index 49aec71916e5..66a12d2631fb 100644 --- a/arch/powerpc/boot/dts/mpc836x_mds.dts +++ b/arch/powerpc/boot/dts/mpc836x_mds.dts | |||
@@ -426,7 +426,8 @@ | |||
426 | #interrupt-cells = <1>; | 426 | #interrupt-cells = <1>; |
427 | #size-cells = <2>; | 427 | #size-cells = <2>; |
428 | #address-cells = <3>; | 428 | #address-cells = <3>; |
429 | reg = <0xe0008500 0x100>; | 429 | reg = <0xe0008500 0x100 /* internal registers */ |
430 | 0xe0008300 0x8>; /* config space access registers */ | ||
430 | compatible = "fsl,mpc8349-pci"; | 431 | compatible = "fsl,mpc8349-pci"; |
431 | device_type = "pci"; | 432 | device_type = "pci"; |
432 | }; | 433 | }; |
diff --git a/arch/powerpc/boot/dts/mpc836x_rdk.dts b/arch/powerpc/boot/dts/mpc836x_rdk.dts index 69c9bd2acd82..decadf3d9e98 100644 --- a/arch/powerpc/boot/dts/mpc836x_rdk.dts +++ b/arch/powerpc/boot/dts/mpc836x_rdk.dts | |||
@@ -387,6 +387,18 @@ | |||
387 | device-width = <1>; | 387 | device-width = <1>; |
388 | }; | 388 | }; |
389 | 389 | ||
390 | upm@1,0 { | ||
391 | compatible = "fsl,upm-nand"; | ||
392 | reg = <1 0 1>; | ||
393 | fsl,upm-addr-offset = <16>; | ||
394 | fsl,upm-cmd-offset = <8>; | ||
395 | gpios = <&qe_pio_e 18 0>; | ||
396 | |||
397 | flash { | ||
398 | compatible = "stm,nand512-a"; | ||
399 | }; | ||
400 | }; | ||
401 | |||
390 | display@2,0 { | 402 | display@2,0 { |
391 | device_type = "display"; | 403 | device_type = "display"; |
392 | compatible = "fujitsu,MB86277", "fujitsu,mint"; | 404 | compatible = "fujitsu,MB86277", "fujitsu,mint"; |
@@ -409,7 +421,8 @@ | |||
409 | #interrupt-cells = <1>; | 421 | #interrupt-cells = <1>; |
410 | device_type = "pci"; | 422 | device_type = "pci"; |
411 | compatible = "fsl,mpc8360-pci", "fsl,mpc8349-pci"; | 423 | compatible = "fsl,mpc8360-pci", "fsl,mpc8349-pci"; |
412 | reg = <0xe0008500 0x100>; | 424 | reg = <0xe0008500 0x100 /* internal registers */ |
425 | 0xe0008300 0x8>; /* config space access registers */ | ||
413 | ranges = <0x02000000 0 0x90000000 0x90000000 0 0x10000000 | 426 | ranges = <0x02000000 0 0x90000000 0x90000000 0 0x10000000 |
414 | 0x42000000 0 0x80000000 0x80000000 0 0x10000000 | 427 | 0x42000000 0 0x80000000 0x80000000 0 0x10000000 |
415 | 0x01000000 0 0xe0300000 0xe0300000 0 0x00100000>; | 428 | 0x01000000 0 0xe0300000 0xe0300000 0 0x00100000>; |
diff --git a/arch/powerpc/boot/dts/mpc8377_mds.dts b/arch/powerpc/boot/dts/mpc8377_mds.dts index 78f0f1124ffb..0484561bd2c0 100644 --- a/arch/powerpc/boot/dts/mpc8377_mds.dts +++ b/arch/powerpc/boot/dts/mpc8377_mds.dts | |||
@@ -136,6 +136,13 @@ | |||
136 | interrupts = <14 0x8>; | 136 | interrupts = <14 0x8>; |
137 | interrupt-parent = <&ipic>; | 137 | interrupt-parent = <&ipic>; |
138 | dfsrr; | 138 | dfsrr; |
139 | |||
140 | rtc@68 { | ||
141 | compatible = "dallas,ds1374"; | ||
142 | reg = <0x68>; | ||
143 | interrupts = <19 0x8>; | ||
144 | interrupt-parent = <&ipic>; | ||
145 | }; | ||
139 | }; | 146 | }; |
140 | 147 | ||
141 | i2c@3100 { | 148 | i2c@3100 { |
@@ -378,7 +385,8 @@ | |||
378 | #interrupt-cells = <1>; | 385 | #interrupt-cells = <1>; |
379 | #size-cells = <2>; | 386 | #size-cells = <2>; |
380 | #address-cells = <3>; | 387 | #address-cells = <3>; |
381 | reg = <0xe0008500 0x100>; | 388 | reg = <0xe0008500 0x100 /* internal registers */ |
389 | 0xe0008300 0x8>; /* config space access registers */ | ||
382 | compatible = "fsl,mpc8349-pci"; | 390 | compatible = "fsl,mpc8349-pci"; |
383 | device_type = "pci"; | 391 | device_type = "pci"; |
384 | }; | 392 | }; |
diff --git a/arch/powerpc/boot/dts/mpc8377_rdb.dts b/arch/powerpc/boot/dts/mpc8377_rdb.dts index d46327e8cb67..53191ba67aaa 100644 --- a/arch/powerpc/boot/dts/mpc8377_rdb.dts +++ b/arch/powerpc/boot/dts/mpc8377_rdb.dts | |||
@@ -319,7 +319,8 @@ | |||
319 | #interrupt-cells = <1>; | 319 | #interrupt-cells = <1>; |
320 | #size-cells = <2>; | 320 | #size-cells = <2>; |
321 | #address-cells = <3>; | 321 | #address-cells = <3>; |
322 | reg = <0xe0008500 0x100>; | 322 | reg = <0xe0008500 0x100 /* internal registers */ |
323 | 0xe0008300 0x8>; /* config space access registers */ | ||
323 | compatible = "fsl,mpc8349-pci"; | 324 | compatible = "fsl,mpc8349-pci"; |
324 | device_type = "pci"; | 325 | device_type = "pci"; |
325 | }; | 326 | }; |
diff --git a/arch/powerpc/boot/dts/mpc8378_mds.dts b/arch/powerpc/boot/dts/mpc8378_mds.dts index c44f30f2f086..67a08d2e2ff2 100644 --- a/arch/powerpc/boot/dts/mpc8378_mds.dts +++ b/arch/powerpc/boot/dts/mpc8378_mds.dts | |||
@@ -136,6 +136,13 @@ | |||
136 | interrupts = <14 0x8>; | 136 | interrupts = <14 0x8>; |
137 | interrupt-parent = <&ipic>; | 137 | interrupt-parent = <&ipic>; |
138 | dfsrr; | 138 | dfsrr; |
139 | |||
140 | rtc@68 { | ||
141 | compatible = "dallas,ds1374"; | ||
142 | reg = <0x68>; | ||
143 | interrupts = <19 0x8>; | ||
144 | interrupt-parent = <&ipic>; | ||
145 | }; | ||
139 | }; | 146 | }; |
140 | 147 | ||
141 | i2c@3100 { | 148 | i2c@3100 { |
@@ -364,7 +371,8 @@ | |||
364 | #interrupt-cells = <1>; | 371 | #interrupt-cells = <1>; |
365 | #size-cells = <2>; | 372 | #size-cells = <2>; |
366 | #address-cells = <3>; | 373 | #address-cells = <3>; |
367 | reg = <0xe0008500 0x100>; | 374 | reg = <0xe0008500 0x100 /* internal registers */ |
375 | 0xe0008300 0x8>; /* config space access registers */ | ||
368 | compatible = "fsl,mpc8349-pci"; | 376 | compatible = "fsl,mpc8349-pci"; |
369 | device_type = "pci"; | 377 | device_type = "pci"; |
370 | }; | 378 | }; |
diff --git a/arch/powerpc/boot/dts/mpc8378_rdb.dts b/arch/powerpc/boot/dts/mpc8378_rdb.dts index b3e3bd7d550d..4a09153d160c 100644 --- a/arch/powerpc/boot/dts/mpc8378_rdb.dts +++ b/arch/powerpc/boot/dts/mpc8378_rdb.dts | |||
@@ -305,7 +305,8 @@ | |||
305 | #interrupt-cells = <1>; | 305 | #interrupt-cells = <1>; |
306 | #size-cells = <2>; | 306 | #size-cells = <2>; |
307 | #address-cells = <3>; | 307 | #address-cells = <3>; |
308 | reg = <0xe0008500 0x100>; | 308 | reg = <0xe0008500 0x100 /* internal registers */ |
309 | 0xe0008300 0x8>; /* config space access registers */ | ||
309 | compatible = "fsl,mpc8349-pci"; | 310 | compatible = "fsl,mpc8349-pci"; |
310 | device_type = "pci"; | 311 | device_type = "pci"; |
311 | }; | 312 | }; |
diff --git a/arch/powerpc/boot/dts/mpc8379_mds.dts b/arch/powerpc/boot/dts/mpc8379_mds.dts index 653ed47c9a37..323370a2b5ff 100644 --- a/arch/powerpc/boot/dts/mpc8379_mds.dts +++ b/arch/powerpc/boot/dts/mpc8379_mds.dts | |||
@@ -136,6 +136,13 @@ | |||
136 | interrupts = <14 0x8>; | 136 | interrupts = <14 0x8>; |
137 | interrupt-parent = <&ipic>; | 137 | interrupt-parent = <&ipic>; |
138 | dfsrr; | 138 | dfsrr; |
139 | |||
140 | rtc@68 { | ||
141 | compatible = "dallas,ds1374"; | ||
142 | reg = <0x68>; | ||
143 | interrupts = <19 0x8>; | ||
144 | interrupt-parent = <&ipic>; | ||
145 | }; | ||
139 | }; | 146 | }; |
140 | 147 | ||
141 | i2c@3100 { | 148 | i2c@3100 { |
@@ -392,7 +399,8 @@ | |||
392 | #interrupt-cells = <1>; | 399 | #interrupt-cells = <1>; |
393 | #size-cells = <2>; | 400 | #size-cells = <2>; |
394 | #address-cells = <3>; | 401 | #address-cells = <3>; |
395 | reg = <0xe0008500 0x100>; | 402 | reg = <0xe0008500 0x100 /* internal registers */ |
403 | 0xe0008300 0x8>; /* config space access registers */ | ||
396 | compatible = "fsl,mpc8349-pci"; | 404 | compatible = "fsl,mpc8349-pci"; |
397 | device_type = "pci"; | 405 | device_type = "pci"; |
398 | }; | 406 | }; |
diff --git a/arch/powerpc/boot/dts/mpc8379_rdb.dts b/arch/powerpc/boot/dts/mpc8379_rdb.dts index 123c8df6f4f0..bbd884ac9dc0 100644 --- a/arch/powerpc/boot/dts/mpc8379_rdb.dts +++ b/arch/powerpc/boot/dts/mpc8379_rdb.dts | |||
@@ -333,7 +333,8 @@ | |||
333 | #interrupt-cells = <1>; | 333 | #interrupt-cells = <1>; |
334 | #size-cells = <2>; | 334 | #size-cells = <2>; |
335 | #address-cells = <3>; | 335 | #address-cells = <3>; |
336 | reg = <0xe0008500 0x100>; | 336 | reg = <0xe0008500 0x100 /* internal registers */ |
337 | 0xe0008300 0x8>; /* config space access registers */ | ||
337 | compatible = "fsl,mpc8349-pci"; | 338 | compatible = "fsl,mpc8349-pci"; |
338 | device_type = "pci"; | 339 | device_type = "pci"; |
339 | }; | 340 | }; |
diff --git a/arch/powerpc/boot/dts/mpc8536ds.dts b/arch/powerpc/boot/dts/mpc8536ds.dts index 1505d6855eff..93fdd99901b6 100644 --- a/arch/powerpc/boot/dts/mpc8536ds.dts +++ b/arch/powerpc/boot/dts/mpc8536ds.dts | |||
@@ -91,6 +91,8 @@ | |||
91 | rtc@68 { | 91 | rtc@68 { |
92 | compatible = "dallas,ds3232"; | 92 | compatible = "dallas,ds3232"; |
93 | reg = <0x68>; | 93 | reg = <0x68>; |
94 | interrupts = <0 0x1>; | ||
95 | interrupt-parent = <&mpic>; | ||
94 | }; | 96 | }; |
95 | }; | 97 | }; |
96 | 98 | ||
diff --git a/arch/powerpc/boot/dts/mpc8610_hpcd.dts b/arch/powerpc/boot/dts/mpc8610_hpcd.dts index 0f3a36e0ea6d..3f4c6102e4e1 100644 --- a/arch/powerpc/boot/dts/mpc8610_hpcd.dts +++ b/arch/powerpc/boot/dts/mpc8610_hpcd.dts | |||
@@ -237,7 +237,7 @@ | |||
237 | 237 | ||
238 | dma00: dma-channel@0 { | 238 | dma00: dma-channel@0 { |
239 | compatible = "fsl,mpc8610-dma-channel", | 239 | compatible = "fsl,mpc8610-dma-channel", |
240 | "fsl,eloplus-dma-channel"; | 240 | "fsl,ssi-dma-channel"; |
241 | cell-index = <0>; | 241 | cell-index = <0>; |
242 | reg = <0x0 0x80>; | 242 | reg = <0x0 0x80>; |
243 | interrupt-parent = <&mpic>; | 243 | interrupt-parent = <&mpic>; |
@@ -245,7 +245,7 @@ | |||
245 | }; | 245 | }; |
246 | dma01: dma-channel@1 { | 246 | dma01: dma-channel@1 { |
247 | compatible = "fsl,mpc8610-dma-channel", | 247 | compatible = "fsl,mpc8610-dma-channel", |
248 | "fsl,eloplus-dma-channel"; | 248 | "fsl,ssi-dma-channel"; |
249 | cell-index = <1>; | 249 | cell-index = <1>; |
250 | reg = <0x80 0x80>; | 250 | reg = <0x80 0x80>; |
251 | interrupt-parent = <&mpic>; | 251 | interrupt-parent = <&mpic>; |
diff --git a/arch/powerpc/boot/dts/sbc8349.dts b/arch/powerpc/boot/dts/sbc8349.dts index c7f411f7a9a2..0f941f310e44 100644 --- a/arch/powerpc/boot/dts/sbc8349.dts +++ b/arch/powerpc/boot/dts/sbc8349.dts | |||
@@ -272,7 +272,8 @@ | |||
272 | #interrupt-cells = <1>; | 272 | #interrupt-cells = <1>; |
273 | #size-cells = <2>; | 273 | #size-cells = <2>; |
274 | #address-cells = <3>; | 274 | #address-cells = <3>; |
275 | reg = <0xe0008500 0x100>; | 275 | reg = <0xe0008500 0x100 /* internal registers */ |
276 | 0xe0008300 0x8>; /* config space access registers */ | ||
276 | compatible = "fsl,mpc8349-pci"; | 277 | compatible = "fsl,mpc8349-pci"; |
277 | device_type = "pci"; | 278 | device_type = "pci"; |
278 | }; | 279 | }; |
diff --git a/arch/powerpc/configs/83xx/asp8347_defconfig b/arch/powerpc/configs/83xx/asp8347_defconfig index 6638f5a03a77..0b1fa20f745c 100644 --- a/arch/powerpc/configs/83xx/asp8347_defconfig +++ b/arch/powerpc/configs/83xx/asp8347_defconfig | |||
@@ -164,6 +164,8 @@ CONFIG_CLASSIC_RCU=y | |||
164 | # | 164 | # |
165 | CONFIG_PPC_MULTIPLATFORM=y | 165 | CONFIG_PPC_MULTIPLATFORM=y |
166 | CONFIG_CLASSIC32=y | 166 | CONFIG_CLASSIC32=y |
167 | # CONFIG_PPC_CHRP is not set | ||
168 | # CONFIG_PPC_PMAC is not set | ||
167 | # CONFIG_MPC5121_ADS is not set | 169 | # CONFIG_MPC5121_ADS is not set |
168 | # CONFIG_MPC5121_GENERIC is not set | 170 | # CONFIG_MPC5121_GENERIC is not set |
169 | # CONFIG_PPC_MPC52xx is not set | 171 | # CONFIG_PPC_MPC52xx is not set |
diff --git a/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig b/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig index df125f30fae8..b7eae2bdf19c 100644 --- a/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig +++ b/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig | |||
@@ -163,6 +163,8 @@ CONFIG_CLASSIC_RCU=y | |||
163 | # | 163 | # |
164 | CONFIG_PPC_MULTIPLATFORM=y | 164 | CONFIG_PPC_MULTIPLATFORM=y |
165 | CONFIG_CLASSIC32=y | 165 | CONFIG_CLASSIC32=y |
166 | # CONFIG_PPC_CHRP is not set | ||
167 | # CONFIG_PPC_PMAC is not set | ||
166 | # CONFIG_MPC5121_ADS is not set | 168 | # CONFIG_MPC5121_ADS is not set |
167 | # CONFIG_MPC5121_GENERIC is not set | 169 | # CONFIG_MPC5121_GENERIC is not set |
168 | # CONFIG_PPC_MPC52xx is not set | 170 | # CONFIG_PPC_MPC52xx is not set |
diff --git a/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig b/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig index 6e0e08cf0b0d..b0a27a67d8c7 100644 --- a/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig +++ b/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig | |||
@@ -163,6 +163,8 @@ CONFIG_CLASSIC_RCU=y | |||
163 | # | 163 | # |
164 | CONFIG_PPC_MULTIPLATFORM=y | 164 | CONFIG_PPC_MULTIPLATFORM=y |
165 | CONFIG_CLASSIC32=y | 165 | CONFIG_CLASSIC32=y |
166 | # CONFIG_PPC_CHRP is not set | ||
167 | # CONFIG_PPC_PMAC is not set | ||
166 | # CONFIG_MPC5121_ADS is not set | 168 | # CONFIG_MPC5121_ADS is not set |
167 | # CONFIG_MPC5121_GENERIC is not set | 169 | # CONFIG_MPC5121_GENERIC is not set |
168 | # CONFIG_PPC_MPC52xx is not set | 170 | # CONFIG_PPC_MPC52xx is not set |
diff --git a/arch/powerpc/configs/83xx/mpc832x_mds_defconfig b/arch/powerpc/configs/83xx/mpc832x_mds_defconfig index d6e204a7b26b..ad825bcddd1f 100644 --- a/arch/powerpc/configs/83xx/mpc832x_mds_defconfig +++ b/arch/powerpc/configs/83xx/mpc832x_mds_defconfig | |||
@@ -163,6 +163,8 @@ CONFIG_CLASSIC_RCU=y | |||
163 | # | 163 | # |
164 | CONFIG_PPC_MULTIPLATFORM=y | 164 | CONFIG_PPC_MULTIPLATFORM=y |
165 | CONFIG_CLASSIC32=y | 165 | CONFIG_CLASSIC32=y |
166 | # CONFIG_PPC_CHRP is not set | ||
167 | # CONFIG_PPC_PMAC is not set | ||
166 | # CONFIG_MPC5121_ADS is not set | 168 | # CONFIG_MPC5121_ADS is not set |
167 | # CONFIG_MPC5121_GENERIC is not set | 169 | # CONFIG_MPC5121_GENERIC is not set |
168 | # CONFIG_PPC_MPC52xx is not set | 170 | # CONFIG_PPC_MPC52xx is not set |
diff --git a/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig b/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig index 1f3d3434b29f..38267501f44d 100644 --- a/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig +++ b/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig | |||
@@ -163,6 +163,8 @@ CONFIG_CLASSIC_RCU=y | |||
163 | # | 163 | # |
164 | CONFIG_PPC_MULTIPLATFORM=y | 164 | CONFIG_PPC_MULTIPLATFORM=y |
165 | CONFIG_CLASSIC32=y | 165 | CONFIG_CLASSIC32=y |
166 | # CONFIG_PPC_CHRP is not set | ||
167 | # CONFIG_PPC_PMAC is not set | ||
166 | # CONFIG_MPC5121_ADS is not set | 168 | # CONFIG_MPC5121_ADS is not set |
167 | # CONFIG_MPC5121_GENERIC is not set | 169 | # CONFIG_MPC5121_GENERIC is not set |
168 | # CONFIG_PPC_MPC52xx is not set | 170 | # CONFIG_PPC_MPC52xx is not set |
diff --git a/arch/powerpc/configs/83xx/mpc834x_itx_defconfig b/arch/powerpc/configs/83xx/mpc834x_itx_defconfig index 4686c2151d05..90aab340e7ff 100644 --- a/arch/powerpc/configs/83xx/mpc834x_itx_defconfig +++ b/arch/powerpc/configs/83xx/mpc834x_itx_defconfig | |||
@@ -163,6 +163,8 @@ CONFIG_CLASSIC_RCU=y | |||
163 | # | 163 | # |
164 | CONFIG_PPC_MULTIPLATFORM=y | 164 | CONFIG_PPC_MULTIPLATFORM=y |
165 | CONFIG_CLASSIC32=y | 165 | CONFIG_CLASSIC32=y |
166 | # CONFIG_PPC_CHRP is not set | ||
167 | # CONFIG_PPC_PMAC is not set | ||
166 | # CONFIG_MPC5121_ADS is not set | 168 | # CONFIG_MPC5121_ADS is not set |
167 | # CONFIG_MPC5121_GENERIC is not set | 169 | # CONFIG_MPC5121_GENERIC is not set |
168 | # CONFIG_PPC_MPC52xx is not set | 170 | # CONFIG_PPC_MPC52xx is not set |
diff --git a/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig b/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig index f11c25ecef76..7458a242d251 100644 --- a/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig +++ b/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig | |||
@@ -163,6 +163,8 @@ CONFIG_CLASSIC_RCU=y | |||
163 | # | 163 | # |
164 | CONFIG_PPC_MULTIPLATFORM=y | 164 | CONFIG_PPC_MULTIPLATFORM=y |
165 | CONFIG_CLASSIC32=y | 165 | CONFIG_CLASSIC32=y |
166 | # CONFIG_PPC_CHRP is not set | ||
167 | # CONFIG_PPC_PMAC is not set | ||
166 | # CONFIG_MPC5121_ADS is not set | 168 | # CONFIG_MPC5121_ADS is not set |
167 | # CONFIG_MPC5121_GENERIC is not set | 169 | # CONFIG_MPC5121_GENERIC is not set |
168 | # CONFIG_PPC_MPC52xx is not set | 170 | # CONFIG_PPC_MPC52xx is not set |
diff --git a/arch/powerpc/configs/83xx/mpc834x_mds_defconfig b/arch/powerpc/configs/83xx/mpc834x_mds_defconfig index ffe4b2ef9691..1a92798938cf 100644 --- a/arch/powerpc/configs/83xx/mpc834x_mds_defconfig +++ b/arch/powerpc/configs/83xx/mpc834x_mds_defconfig | |||
@@ -163,6 +163,8 @@ CONFIG_CLASSIC_RCU=y | |||
163 | # | 163 | # |
164 | CONFIG_PPC_MULTIPLATFORM=y | 164 | CONFIG_PPC_MULTIPLATFORM=y |
165 | CONFIG_CLASSIC32=y | 165 | CONFIG_CLASSIC32=y |
166 | # CONFIG_PPC_CHRP is not set | ||
167 | # CONFIG_PPC_PMAC is not set | ||
166 | # CONFIG_MPC5121_ADS is not set | 168 | # CONFIG_MPC5121_ADS is not set |
167 | # CONFIG_MPC5121_GENERIC is not set | 169 | # CONFIG_MPC5121_GENERIC is not set |
168 | # CONFIG_PPC_MPC52xx is not set | 170 | # CONFIG_PPC_MPC52xx is not set |
diff --git a/arch/powerpc/configs/83xx/mpc836x_mds_defconfig b/arch/powerpc/configs/83xx/mpc836x_mds_defconfig index 71445e31a304..03d8cede0272 100644 --- a/arch/powerpc/configs/83xx/mpc836x_mds_defconfig +++ b/arch/powerpc/configs/83xx/mpc836x_mds_defconfig | |||
@@ -163,6 +163,8 @@ CONFIG_CLASSIC_RCU=y | |||
163 | # | 163 | # |
164 | CONFIG_PPC_MULTIPLATFORM=y | 164 | CONFIG_PPC_MULTIPLATFORM=y |
165 | CONFIG_CLASSIC32=y | 165 | CONFIG_CLASSIC32=y |
166 | # CONFIG_PPC_CHRP is not set | ||
167 | # CONFIG_PPC_PMAC is not set | ||
166 | # CONFIG_MPC5121_ADS is not set | 168 | # CONFIG_MPC5121_ADS is not set |
167 | # CONFIG_MPC5121_GENERIC is not set | 169 | # CONFIG_MPC5121_GENERIC is not set |
168 | # CONFIG_PPC_MPC52xx is not set | 170 | # CONFIG_PPC_MPC52xx is not set |
diff --git a/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig b/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig index 58486ccae461..cdf84177370a 100644 --- a/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig +++ b/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig | |||
@@ -164,6 +164,8 @@ CONFIG_CLASSIC_RCU=y | |||
164 | # | 164 | # |
165 | CONFIG_PPC_MULTIPLATFORM=y | 165 | CONFIG_PPC_MULTIPLATFORM=y |
166 | CONFIG_CLASSIC32=y | 166 | CONFIG_CLASSIC32=y |
167 | # CONFIG_PPC_CHRP is not set | ||
168 | # CONFIG_PPC_PMAC is not set | ||
167 | # CONFIG_MPC5121_ADS is not set | 169 | # CONFIG_MPC5121_ADS is not set |
168 | # CONFIG_MPC5121_GENERIC is not set | 170 | # CONFIG_MPC5121_GENERIC is not set |
169 | # CONFIG_PPC_MPC52xx is not set | 171 | # CONFIG_PPC_MPC52xx is not set |
diff --git a/arch/powerpc/configs/83xx/mpc837x_mds_defconfig b/arch/powerpc/configs/83xx/mpc837x_mds_defconfig index 0171e2176454..97e02d7a5b09 100644 --- a/arch/powerpc/configs/83xx/mpc837x_mds_defconfig +++ b/arch/powerpc/configs/83xx/mpc837x_mds_defconfig | |||
@@ -164,6 +164,8 @@ CONFIG_CLASSIC_RCU=y | |||
164 | # | 164 | # |
165 | CONFIG_PPC_MULTIPLATFORM=y | 165 | CONFIG_PPC_MULTIPLATFORM=y |
166 | CONFIG_CLASSIC32=y | 166 | CONFIG_CLASSIC32=y |
167 | # CONFIG_PPC_CHRP is not set | ||
168 | # CONFIG_PPC_PMAC is not set | ||
167 | # CONFIG_MPC5121_ADS is not set | 169 | # CONFIG_MPC5121_ADS is not set |
168 | # CONFIG_MPC5121_GENERIC is not set | 170 | # CONFIG_MPC5121_GENERIC is not set |
169 | # CONFIG_PPC_MPC52xx is not set | 171 | # CONFIG_PPC_MPC52xx is not set |
diff --git a/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig b/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig index d6b383bb3644..5ac33054ce2c 100644 --- a/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig +++ b/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig | |||
@@ -164,6 +164,8 @@ CONFIG_CLASSIC_RCU=y | |||
164 | # | 164 | # |
165 | CONFIG_PPC_MULTIPLATFORM=y | 165 | CONFIG_PPC_MULTIPLATFORM=y |
166 | CONFIG_CLASSIC32=y | 166 | CONFIG_CLASSIC32=y |
167 | # CONFIG_PPC_CHRP is not set | ||
168 | # CONFIG_PPC_PMAC is not set | ||
167 | # CONFIG_MPC5121_ADS is not set | 169 | # CONFIG_MPC5121_ADS is not set |
168 | # CONFIG_MPC5121_GENERIC is not set | 170 | # CONFIG_MPC5121_GENERIC is not set |
169 | # CONFIG_PPC_MPC52xx is not set | 171 | # CONFIG_PPC_MPC52xx is not set |
diff --git a/arch/powerpc/configs/83xx/sbc834x_defconfig b/arch/powerpc/configs/83xx/sbc834x_defconfig index b8dd17bf040e..c359cc2a380e 100644 --- a/arch/powerpc/configs/83xx/sbc834x_defconfig +++ b/arch/powerpc/configs/83xx/sbc834x_defconfig | |||
@@ -162,6 +162,8 @@ CONFIG_CLASSIC_RCU=y | |||
162 | # | 162 | # |
163 | CONFIG_PPC_MULTIPLATFORM=y | 163 | CONFIG_PPC_MULTIPLATFORM=y |
164 | CONFIG_CLASSIC32=y | 164 | CONFIG_CLASSIC32=y |
165 | # CONFIG_PPC_CHRP is not set | ||
166 | # CONFIG_PPC_PMAC is not set | ||
165 | # CONFIG_MPC5121_ADS is not set | 167 | # CONFIG_MPC5121_ADS is not set |
166 | # CONFIG_MPC5121_GENERIC is not set | 168 | # CONFIG_MPC5121_GENERIC is not set |
167 | # CONFIG_PPC_MPC52xx is not set | 169 | # CONFIG_PPC_MPC52xx is not set |
diff --git a/arch/powerpc/configs/86xx/gef_sbc610_defconfig b/arch/powerpc/configs/86xx/gef_sbc610_defconfig index f589489449da..312d7afbbe44 100644 --- a/arch/powerpc/configs/86xx/gef_sbc610_defconfig +++ b/arch/powerpc/configs/86xx/gef_sbc610_defconfig | |||
@@ -156,7 +156,10 @@ CONFIG_CLASSIC_RCU=y | |||
156 | # | 156 | # |
157 | # Platform support | 157 | # Platform support |
158 | # | 158 | # |
159 | # CONFIG_PPC_MULTIPLATFORM is not set | 159 | CONFIG_PPC_MULTIPLATFORM=y |
160 | CONFIG_CLASSIC32=y | ||
161 | # CONFIG_PPC_CHRP is not set | ||
162 | # CONFIG_PPC_PMAC is not set | ||
160 | # CONFIG_PPC_82xx is not set | 163 | # CONFIG_PPC_82xx is not set |
161 | # CONFIG_PPC_83xx is not set | 164 | # CONFIG_PPC_83xx is not set |
162 | CONFIG_PPC_86xx=y | 165 | CONFIG_PPC_86xx=y |
diff --git a/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig b/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig index 14116a80c7cd..c98c6ee44492 100644 --- a/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig +++ b/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig | |||
@@ -165,6 +165,8 @@ CONFIG_CLASSIC_RCU=y | |||
165 | # | 165 | # |
166 | CONFIG_PPC_MULTIPLATFORM=y | 166 | CONFIG_PPC_MULTIPLATFORM=y |
167 | CONFIG_CLASSIC32=y | 167 | CONFIG_CLASSIC32=y |
168 | # CONFIG_PPC_CHRP is not set | ||
169 | # CONFIG_PPC_PMAC is not set | ||
168 | # CONFIG_MPC5121_ADS is not set | 170 | # CONFIG_MPC5121_ADS is not set |
169 | # CONFIG_MPC5121_GENERIC is not set | 171 | # CONFIG_MPC5121_GENERIC is not set |
170 | # CONFIG_PPC_MPC52xx is not set | 172 | # CONFIG_PPC_MPC52xx is not set |
diff --git a/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig b/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig index 07e369d9e485..444ddf98436d 100644 --- a/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig +++ b/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig | |||
@@ -167,6 +167,8 @@ CONFIG_CLASSIC_RCU=y | |||
167 | # | 167 | # |
168 | CONFIG_PPC_MULTIPLATFORM=y | 168 | CONFIG_PPC_MULTIPLATFORM=y |
169 | CONFIG_CLASSIC32=y | 169 | CONFIG_CLASSIC32=y |
170 | # CONFIG_PPC_CHRP is not set | ||
171 | # CONFIG_PPC_PMAC is not set | ||
170 | # CONFIG_MPC5121_ADS is not set | 172 | # CONFIG_MPC5121_ADS is not set |
171 | # CONFIG_MPC5121_GENERIC is not set | 173 | # CONFIG_MPC5121_GENERIC is not set |
172 | # CONFIG_PPC_MPC52xx is not set | 174 | # CONFIG_PPC_MPC52xx is not set |
diff --git a/arch/powerpc/configs/86xx/sbc8641d_defconfig b/arch/powerpc/configs/86xx/sbc8641d_defconfig index 3326303d3765..d900f8f376cf 100644 --- a/arch/powerpc/configs/86xx/sbc8641d_defconfig +++ b/arch/powerpc/configs/86xx/sbc8641d_defconfig | |||
@@ -166,6 +166,8 @@ CONFIG_CLASSIC_RCU=y | |||
166 | # | 166 | # |
167 | CONFIG_PPC_MULTIPLATFORM=y | 167 | CONFIG_PPC_MULTIPLATFORM=y |
168 | CONFIG_CLASSIC32=y | 168 | CONFIG_CLASSIC32=y |
169 | # CONFIG_PPC_CHRP is not set | ||
170 | # CONFIG_PPC_PMAC is not set | ||
169 | # CONFIG_MPC5121_ADS is not set | 171 | # CONFIG_MPC5121_ADS is not set |
170 | # CONFIG_MPC5121_GENERIC is not set | 172 | # CONFIG_MPC5121_GENERIC is not set |
171 | # CONFIG_PPC_MPC52xx is not set | 173 | # CONFIG_PPC_MPC52xx is not set |
diff --git a/arch/powerpc/configs/ep8248e_defconfig b/arch/powerpc/configs/ep8248e_defconfig index a63cd05ef200..cd691f770810 100644 --- a/arch/powerpc/configs/ep8248e_defconfig +++ b/arch/powerpc/configs/ep8248e_defconfig | |||
@@ -150,6 +150,8 @@ CONFIG_CLASSIC_RCU=y | |||
150 | # | 150 | # |
151 | CONFIG_PPC_MULTIPLATFORM=y | 151 | CONFIG_PPC_MULTIPLATFORM=y |
152 | CONFIG_CLASSIC32=y | 152 | CONFIG_CLASSIC32=y |
153 | # CONFIG_PPC_CHRP is not set | ||
154 | # CONFIG_PPC_PMAC is not set | ||
153 | # CONFIG_MPC5121_ADS is not set | 155 | # CONFIG_MPC5121_ADS is not set |
154 | # CONFIG_MPC5121_GENERIC is not set | 156 | # CONFIG_MPC5121_GENERIC is not set |
155 | # CONFIG_PPC_MPC52xx is not set | 157 | # CONFIG_PPC_MPC52xx is not set |
diff --git a/arch/powerpc/configs/mpc8272_ads_defconfig b/arch/powerpc/configs/mpc8272_ads_defconfig index ddbca3e39ba4..ff6f7c475f47 100644 --- a/arch/powerpc/configs/mpc8272_ads_defconfig +++ b/arch/powerpc/configs/mpc8272_ads_defconfig | |||
@@ -151,6 +151,8 @@ CONFIG_CLASSIC_RCU=y | |||
151 | # | 151 | # |
152 | CONFIG_PPC_MULTIPLATFORM=y | 152 | CONFIG_PPC_MULTIPLATFORM=y |
153 | CONFIG_CLASSIC32=y | 153 | CONFIG_CLASSIC32=y |
154 | # CONFIG_PPC_CHRP is not set | ||
155 | # CONFIG_PPC_PMAC is not set | ||
154 | # CONFIG_MPC5121_ADS is not set | 156 | # CONFIG_MPC5121_ADS is not set |
155 | # CONFIG_MPC5121_GENERIC is not set | 157 | # CONFIG_MPC5121_GENERIC is not set |
156 | # CONFIG_PPC_MPC52xx is not set | 158 | # CONFIG_PPC_MPC52xx is not set |
diff --git a/arch/powerpc/configs/mpc83xx_defconfig b/arch/powerpc/configs/mpc83xx_defconfig index 994a4e7257f1..991c9bda12a9 100644 --- a/arch/powerpc/configs/mpc83xx_defconfig +++ b/arch/powerpc/configs/mpc83xx_defconfig | |||
@@ -166,6 +166,8 @@ CONFIG_CLASSIC_RCU=y | |||
166 | # | 166 | # |
167 | CONFIG_PPC_MULTIPLATFORM=y | 167 | CONFIG_PPC_MULTIPLATFORM=y |
168 | CONFIG_CLASSIC32=y | 168 | CONFIG_CLASSIC32=y |
169 | # CONFIG_PPC_CHRP is not set | ||
170 | # CONFIG_PPC_PMAC is not set | ||
169 | # CONFIG_MPC5121_ADS is not set | 171 | # CONFIG_MPC5121_ADS is not set |
170 | # CONFIG_MPC5121_GENERIC is not set | 172 | # CONFIG_MPC5121_GENERIC is not set |
171 | # CONFIG_PPC_MPC52xx is not set | 173 | # CONFIG_PPC_MPC52xx is not set |
diff --git a/arch/powerpc/configs/pq2fads_defconfig b/arch/powerpc/configs/pq2fads_defconfig index e687cc0f2a95..7e17862c38b8 100644 --- a/arch/powerpc/configs/pq2fads_defconfig +++ b/arch/powerpc/configs/pq2fads_defconfig | |||
@@ -152,6 +152,8 @@ CONFIG_CLASSIC_RCU=y | |||
152 | # | 152 | # |
153 | CONFIG_PPC_MULTIPLATFORM=y | 153 | CONFIG_PPC_MULTIPLATFORM=y |
154 | CONFIG_CLASSIC32=y | 154 | CONFIG_CLASSIC32=y |
155 | # CONFIG_PPC_CHRP is not set | ||
156 | # CONFIG_PPC_PMAC is not set | ||
155 | # CONFIG_MPC5121_ADS is not set | 157 | # CONFIG_MPC5121_ADS is not set |
156 | # CONFIG_MPC5121_GENERIC is not set | 158 | # CONFIG_MPC5121_GENERIC is not set |
157 | # CONFIG_PPC_MPC52xx is not set | 159 | # CONFIG_PPC_MPC52xx is not set |
diff --git a/arch/powerpc/include/asm/fsl_lbc.h b/arch/powerpc/include/asm/fsl_lbc.h index 303f5484c050..63a4f779f531 100644 --- a/arch/powerpc/include/asm/fsl_lbc.h +++ b/arch/powerpc/include/asm/fsl_lbc.h | |||
@@ -23,9 +23,9 @@ | |||
23 | #ifndef __ASM_FSL_LBC_H | 23 | #ifndef __ASM_FSL_LBC_H |
24 | #define __ASM_FSL_LBC_H | 24 | #define __ASM_FSL_LBC_H |
25 | 25 | ||
26 | #include <linux/compiler.h> | ||
26 | #include <linux/types.h> | 27 | #include <linux/types.h> |
27 | #include <linux/spinlock.h> | 28 | #include <linux/io.h> |
28 | #include <asm/io.h> | ||
29 | 29 | ||
30 | struct fsl_lbc_bank { | 30 | struct fsl_lbc_bank { |
31 | __be32 br; /**< Base Register */ | 31 | __be32 br; /**< Base Register */ |
@@ -227,9 +227,6 @@ struct fsl_lbc_regs { | |||
227 | u8 res8[0xF00]; | 227 | u8 res8[0xF00]; |
228 | }; | 228 | }; |
229 | 229 | ||
230 | extern struct fsl_lbc_regs __iomem *fsl_lbc_regs; | ||
231 | extern spinlock_t fsl_lbc_lock; | ||
232 | |||
233 | /* | 230 | /* |
234 | * FSL UPM routines | 231 | * FSL UPM routines |
235 | */ | 232 | */ |
@@ -268,44 +265,7 @@ static inline void fsl_upm_end_pattern(struct fsl_upm *upm) | |||
268 | cpu_relax(); | 265 | cpu_relax(); |
269 | } | 266 | } |
270 | 267 | ||
271 | /** | 268 | extern int fsl_upm_run_pattern(struct fsl_upm *upm, void __iomem *io_base, |
272 | * fsl_upm_run_pattern - actually run an UPM pattern | 269 | u32 mar); |
273 | * @upm: pointer to the fsl_upm structure obtained via fsl_upm_find | ||
274 | * @io_base: remapped pointer to where memory access should happen | ||
275 | * @mar: MAR register content during pattern execution | ||
276 | * | ||
277 | * This function triggers dummy write to the memory specified by the io_base, | ||
278 | * thus UPM pattern actually executed. Note that mar usage depends on the | ||
279 | * pre-programmed AMX bits in the UPM RAM. | ||
280 | */ | ||
281 | static inline int fsl_upm_run_pattern(struct fsl_upm *upm, | ||
282 | void __iomem *io_base, u32 mar) | ||
283 | { | ||
284 | int ret = 0; | ||
285 | unsigned long flags; | ||
286 | |||
287 | spin_lock_irqsave(&fsl_lbc_lock, flags); | ||
288 | |||
289 | out_be32(&fsl_lbc_regs->mar, mar << (32 - upm->width)); | ||
290 | |||
291 | switch (upm->width) { | ||
292 | case 8: | ||
293 | out_8(io_base, 0x0); | ||
294 | break; | ||
295 | case 16: | ||
296 | out_be16(io_base, 0x0); | ||
297 | break; | ||
298 | case 32: | ||
299 | out_be32(io_base, 0x0); | ||
300 | break; | ||
301 | default: | ||
302 | ret = -EINVAL; | ||
303 | break; | ||
304 | } | ||
305 | |||
306 | spin_unlock_irqrestore(&fsl_lbc_lock, flags); | ||
307 | |||
308 | return ret; | ||
309 | } | ||
310 | 270 | ||
311 | #endif /* __ASM_FSL_LBC_H */ | 271 | #endif /* __ASM_FSL_LBC_H */ |
diff --git a/arch/powerpc/kernel/head_fsl_booke.S b/arch/powerpc/kernel/head_fsl_booke.S index 18c0093f9323..590304c24dad 100644 --- a/arch/powerpc/kernel/head_fsl_booke.S +++ b/arch/powerpc/kernel/head_fsl_booke.S | |||
@@ -656,10 +656,6 @@ interrupt_base: | |||
656 | 656 | ||
657 | bne 2f /* Bail if permission mismach */ | 657 | bne 2f /* Bail if permission mismach */ |
658 | 658 | ||
659 | #ifdef CONFIG_PTE_64BIT | ||
660 | lwz r13,0(r12) | ||
661 | #endif | ||
662 | |||
663 | /* Jump to common TLB load point */ | 659 | /* Jump to common TLB load point */ |
664 | b finish_tlb_load | 660 | b finish_tlb_load |
665 | 661 | ||
diff --git a/arch/powerpc/kernel/pci_32.c b/arch/powerpc/kernel/pci_32.c index 174b77ee18ff..a848c6360bd1 100644 --- a/arch/powerpc/kernel/pci_32.c +++ b/arch/powerpc/kernel/pci_32.c | |||
@@ -54,11 +54,12 @@ LIST_HEAD(hose_list); | |||
54 | static int pci_bus_count; | 54 | static int pci_bus_count; |
55 | 55 | ||
56 | static void | 56 | static void |
57 | fixup_hide_host_resource_fsl(struct pci_dev* dev) | 57 | fixup_hide_host_resource_fsl(struct pci_dev *dev) |
58 | { | 58 | { |
59 | int i, class = dev->class >> 8; | 59 | int i, class = dev->class >> 8; |
60 | 60 | ||
61 | if ((class == PCI_CLASS_PROCESSOR_POWERPC) && | 61 | if ((class == PCI_CLASS_PROCESSOR_POWERPC || |
62 | class == PCI_CLASS_BRIDGE_OTHER) && | ||
62 | (dev->hdr_type == PCI_HEADER_TYPE_NORMAL) && | 63 | (dev->hdr_type == PCI_HEADER_TYPE_NORMAL) && |
63 | (dev->bus->parent == NULL)) { | 64 | (dev->bus->parent == NULL)) { |
64 | for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) { | 65 | for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) { |
diff --git a/arch/powerpc/platforms/512x/Kconfig b/arch/powerpc/platforms/512x/Kconfig index c62f893ede19..326852c78b8f 100644 --- a/arch/powerpc/platforms/512x/Kconfig +++ b/arch/powerpc/platforms/512x/Kconfig | |||
@@ -3,6 +3,8 @@ config PPC_MPC512x | |||
3 | select FSL_SOC | 3 | select FSL_SOC |
4 | select IPIC | 4 | select IPIC |
5 | select PPC_CLOCK | 5 | select PPC_CLOCK |
6 | select PPC_PCI_CHOICE | ||
7 | select FSL_PCI if PCI | ||
6 | 8 | ||
7 | config PPC_MPC5121 | 9 | config PPC_MPC5121 |
8 | bool | 10 | bool |
diff --git a/arch/powerpc/platforms/512x/mpc5121_ads.c b/arch/powerpc/platforms/512x/mpc5121_ads.c index 5ebf6939a697..441abc488851 100644 --- a/arch/powerpc/platforms/512x/mpc5121_ads.c +++ b/arch/powerpc/platforms/512x/mpc5121_ads.c | |||
@@ -22,16 +22,26 @@ | |||
22 | #include <asm/prom.h> | 22 | #include <asm/prom.h> |
23 | #include <asm/time.h> | 23 | #include <asm/time.h> |
24 | 24 | ||
25 | #include <sysdev/fsl_pci.h> | ||
26 | |||
25 | #include "mpc512x.h" | 27 | #include "mpc512x.h" |
26 | #include "mpc5121_ads.h" | 28 | #include "mpc5121_ads.h" |
27 | 29 | ||
28 | static void __init mpc5121_ads_setup_arch(void) | 30 | static void __init mpc5121_ads_setup_arch(void) |
29 | { | 31 | { |
32 | #ifdef CONFIG_PCI | ||
33 | struct device_node *np; | ||
34 | #endif | ||
30 | printk(KERN_INFO "MPC5121 ADS board from Freescale Semiconductor\n"); | 35 | printk(KERN_INFO "MPC5121 ADS board from Freescale Semiconductor\n"); |
31 | /* | 36 | /* |
32 | * cpld regs are needed early | 37 | * cpld regs are needed early |
33 | */ | 38 | */ |
34 | mpc5121_ads_cpld_map(); | 39 | mpc5121_ads_cpld_map(); |
40 | |||
41 | #ifdef CONFIG_PCI | ||
42 | for_each_compatible_node(np, "pci", "fsl,mpc5121-pci") | ||
43 | mpc83xx_add_bridge(np); | ||
44 | #endif | ||
35 | } | 45 | } |
36 | 46 | ||
37 | static void __init mpc5121_ads_init_IRQ(void) | 47 | static void __init mpc5121_ads_init_IRQ(void) |
diff --git a/arch/powerpc/platforms/83xx/Kconfig b/arch/powerpc/platforms/83xx/Kconfig index 6159c5d4e5f1..83c664afc897 100644 --- a/arch/powerpc/platforms/83xx/Kconfig +++ b/arch/powerpc/platforms/83xx/Kconfig | |||
@@ -19,7 +19,6 @@ config MPC831x_RDB | |||
19 | config MPC832x_MDS | 19 | config MPC832x_MDS |
20 | bool "Freescale MPC832x MDS" | 20 | bool "Freescale MPC832x MDS" |
21 | select DEFAULT_UIMAGE | 21 | select DEFAULT_UIMAGE |
22 | select QUICC_ENGINE | ||
23 | select PPC_MPC832x | 22 | select PPC_MPC832x |
24 | help | 23 | help |
25 | This option enables support for the MPC832x MDS evaluation board. | 24 | This option enables support for the MPC832x MDS evaluation board. |
@@ -27,7 +26,6 @@ config MPC832x_MDS | |||
27 | config MPC832x_RDB | 26 | config MPC832x_RDB |
28 | bool "Freescale MPC832x RDB" | 27 | bool "Freescale MPC832x RDB" |
29 | select DEFAULT_UIMAGE | 28 | select DEFAULT_UIMAGE |
30 | select QUICC_ENGINE | ||
31 | select PPC_MPC832x | 29 | select PPC_MPC832x |
32 | help | 30 | help |
33 | This option enables support for the MPC8323 RDB board. | 31 | This option enables support for the MPC8323 RDB board. |
@@ -57,15 +55,12 @@ config MPC834x_ITX | |||
57 | config MPC836x_MDS | 55 | config MPC836x_MDS |
58 | bool "Freescale MPC836x MDS" | 56 | bool "Freescale MPC836x MDS" |
59 | select DEFAULT_UIMAGE | 57 | select DEFAULT_UIMAGE |
60 | select QUICC_ENGINE | ||
61 | help | 58 | help |
62 | This option enables support for the MPC836x MDS Processor Board. | 59 | This option enables support for the MPC836x MDS Processor Board. |
63 | 60 | ||
64 | config MPC836x_RDK | 61 | config MPC836x_RDK |
65 | bool "Freescale/Logic MPC836x RDK" | 62 | bool "Freescale/Logic MPC836x RDK" |
66 | select DEFAULT_UIMAGE | 63 | select DEFAULT_UIMAGE |
67 | select QUICC_ENGINE | ||
68 | select QE_GPIO | ||
69 | select FSL_GTM | 64 | select FSL_GTM |
70 | select FSL_LBC | 65 | select FSL_LBC |
71 | help | 66 | help |
diff --git a/arch/powerpc/platforms/83xx/mpc837x_mds.c b/arch/powerpc/platforms/83xx/mpc837x_mds.c index be62de23bead..8bb13c807142 100644 --- a/arch/powerpc/platforms/83xx/mpc837x_mds.c +++ b/arch/powerpc/platforms/83xx/mpc837x_mds.c | |||
@@ -85,8 +85,14 @@ static void __init mpc837x_mds_setup_arch(void) | |||
85 | ppc_md.progress("mpc837x_mds_setup_arch()", 0); | 85 | ppc_md.progress("mpc837x_mds_setup_arch()", 0); |
86 | 86 | ||
87 | #ifdef CONFIG_PCI | 87 | #ifdef CONFIG_PCI |
88 | for_each_compatible_node(np, "pci", "fsl,mpc8349-pci") | 88 | for_each_compatible_node(np, "pci", "fsl,mpc8349-pci") { |
89 | if (!of_device_is_available(np)) { | ||
90 | pr_warning("%s: disabled by the firmware.\n", | ||
91 | np->full_name); | ||
92 | continue; | ||
93 | } | ||
89 | mpc83xx_add_bridge(np); | 94 | mpc83xx_add_bridge(np); |
95 | } | ||
90 | #endif | 96 | #endif |
91 | mpc837xmds_usb_cfg(); | 97 | mpc837xmds_usb_cfg(); |
92 | } | 98 | } |
diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig index 291675b0097a..b79dc710ed34 100644 --- a/arch/powerpc/platforms/85xx/Kconfig +++ b/arch/powerpc/platforms/85xx/Kconfig | |||
@@ -33,7 +33,6 @@ config MPC85xx_CDS | |||
33 | config MPC85xx_MDS | 33 | config MPC85xx_MDS |
34 | bool "Freescale MPC85xx MDS" | 34 | bool "Freescale MPC85xx MDS" |
35 | select DEFAULT_UIMAGE | 35 | select DEFAULT_UIMAGE |
36 | select QUICC_ENGINE | ||
37 | select PHYLIB | 36 | select PHYLIB |
38 | help | 37 | help |
39 | This option enables support for the MPC85xx MDS board | 38 | This option enables support for the MPC85xx MDS board |
diff --git a/arch/powerpc/platforms/86xx/Makefile b/arch/powerpc/platforms/86xx/Makefile index cb9fc8f4360b..4a56ff619afd 100644 --- a/arch/powerpc/platforms/86xx/Makefile +++ b/arch/powerpc/platforms/86xx/Makefile | |||
@@ -7,4 +7,4 @@ obj-$(CONFIG_SMP) += mpc86xx_smp.o | |||
7 | obj-$(CONFIG_MPC8641_HPCN) += mpc86xx_hpcn.o | 7 | obj-$(CONFIG_MPC8641_HPCN) += mpc86xx_hpcn.o |
8 | obj-$(CONFIG_SBC8641D) += sbc8641d.o | 8 | obj-$(CONFIG_SBC8641D) += sbc8641d.o |
9 | obj-$(CONFIG_MPC8610_HPCD) += mpc8610_hpcd.o | 9 | obj-$(CONFIG_MPC8610_HPCD) += mpc8610_hpcd.o |
10 | obj-$(CONFIG_GEF_SBC610) += gef_sbc610.o | 10 | obj-$(CONFIG_GEF_SBC610) += gef_sbc610.o gef_pic.o |
diff --git a/arch/powerpc/platforms/86xx/gef_pic.c b/arch/powerpc/platforms/86xx/gef_pic.c new file mode 100644 index 000000000000..50d0a2b63809 --- /dev/null +++ b/arch/powerpc/platforms/86xx/gef_pic.c | |||
@@ -0,0 +1,258 @@ | |||
1 | /* | ||
2 | * Interrupt handling for GE Fanuc's FPGA based PIC | ||
3 | * | ||
4 | * Author: Martyn Welch <martyn.welch@gefanuc.com> | ||
5 | * | ||
6 | * 2008 (c) GE Fanuc Intelligent Platforms Embedded Systems, Inc. | ||
7 | * | ||
8 | * This file is licensed under the terms of the GNU General Public License | ||
9 | * version 2. This program is licensed "as is" without any warranty of any | ||
10 | * kind, whether express or implied. | ||
11 | */ | ||
12 | |||
13 | #include <linux/stddef.h> | ||
14 | #include <linux/kernel.h> | ||
15 | #include <linux/init.h> | ||
16 | #include <linux/irq.h> | ||
17 | #include <linux/interrupt.h> | ||
18 | #include <linux/spinlock.h> | ||
19 | |||
20 | #include <asm/byteorder.h> | ||
21 | #include <asm/io.h> | ||
22 | #include <asm/prom.h> | ||
23 | #include <asm/irq.h> | ||
24 | |||
25 | #include "gef_pic.h" | ||
26 | |||
27 | #define DEBUG | ||
28 | #undef DEBUG | ||
29 | |||
30 | #ifdef DEBUG | ||
31 | #define DBG(fmt...) do { printk(KERN_DEBUG "gef_pic: " fmt); } while (0) | ||
32 | #else | ||
33 | #define DBG(fmt...) do { } while (0) | ||
34 | #endif | ||
35 | |||
36 | #define GEF_PIC_NUM_IRQS 32 | ||
37 | |||
38 | /* Interrupt Controller Interface Registers */ | ||
39 | #define GEF_PIC_INTR_STATUS 0x0000 | ||
40 | |||
41 | #define GEF_PIC_INTR_MASK(cpu) (0x0010 + (0x4 * cpu)) | ||
42 | #define GEF_PIC_CPU0_INTR_MASK GEF_PIC_INTR_MASK(0) | ||
43 | #define GEF_PIC_CPU1_INTR_MASK GEF_PIC_INTR_MASK(1) | ||
44 | |||
45 | #define GEF_PIC_MCP_MASK(cpu) (0x0018 + (0x4 * cpu)) | ||
46 | #define GEF_PIC_CPU0_MCP_MASK GEF_PIC_MCP_MASK(0) | ||
47 | #define GEF_PIC_CPU1_MCP_MASK GEF_PIC_MCP_MASK(1) | ||
48 | |||
49 | #define gef_irq_to_hw(virq) ((unsigned int)irq_map[virq].hwirq) | ||
50 | |||
51 | |||
52 | static DEFINE_SPINLOCK(gef_pic_lock); | ||
53 | |||
54 | static void __iomem *gef_pic_irq_reg_base; | ||
55 | static struct irq_host *gef_pic_irq_host; | ||
56 | static int gef_pic_cascade_irq; | ||
57 | |||
58 | /* | ||
59 | * Interrupt Controller Handling | ||
60 | * | ||
61 | * The interrupt controller handles interrupts for most on board interrupts, | ||
62 | * apart from PCI interrupts. For example on SBC610: | ||
63 | * | ||
64 | * 17:31 RO Reserved | ||
65 | * 16 RO PCI Express Doorbell 3 Status | ||
66 | * 15 RO PCI Express Doorbell 2 Status | ||
67 | * 14 RO PCI Express Doorbell 1 Status | ||
68 | * 13 RO PCI Express Doorbell 0 Status | ||
69 | * 12 RO Real Time Clock Interrupt Status | ||
70 | * 11 RO Temperature Interrupt Status | ||
71 | * 10 RO Temperature Critical Interrupt Status | ||
72 | * 9 RO Ethernet PHY1 Interrupt Status | ||
73 | * 8 RO Ethernet PHY3 Interrupt Status | ||
74 | * 7 RO PEX8548 Interrupt Status | ||
75 | * 6 RO Reserved | ||
76 | * 5 RO Watchdog 0 Interrupt Status | ||
77 | * 4 RO Watchdog 1 Interrupt Status | ||
78 | * 3 RO AXIS Message FIFO A Interrupt Status | ||
79 | * 2 RO AXIS Message FIFO B Interrupt Status | ||
80 | * 1 RO AXIS Message FIFO C Interrupt Status | ||
81 | * 0 RO AXIS Message FIFO D Interrupt Status | ||
82 | * | ||
83 | * Interrupts can be forwarded to one of two output lines. Nothing | ||
84 | * clever is done, so if the masks are incorrectly set, a single input | ||
85 | * interrupt could generate interrupts on both output lines! | ||
86 | * | ||
87 | * The dual lines are there to allow the chained interrupts to be easily | ||
88 | * passed into two different cores. We currently do not use this functionality | ||
89 | * in this driver. | ||
90 | * | ||
91 | * Controller can also be configured to generate Machine checks (MCP), again on | ||
92 | * two lines, to be attached to two different cores. It is suggested that these | ||
93 | * should be masked out. | ||
94 | */ | ||
95 | |||
96 | void gef_pic_cascade(unsigned int irq, struct irq_desc *desc) | ||
97 | { | ||
98 | unsigned int cascade_irq; | ||
99 | |||
100 | /* | ||
101 | * See if we actually have an interrupt, call generic handling code if | ||
102 | * we do. | ||
103 | */ | ||
104 | cascade_irq = gef_pic_get_irq(); | ||
105 | |||
106 | if (cascade_irq != NO_IRQ) | ||
107 | generic_handle_irq(cascade_irq); | ||
108 | |||
109 | desc->chip->eoi(irq); | ||
110 | |||
111 | } | ||
112 | |||
113 | static void gef_pic_mask(unsigned int virq) | ||
114 | { | ||
115 | unsigned long flags; | ||
116 | unsigned int hwirq; | ||
117 | u32 mask; | ||
118 | |||
119 | hwirq = gef_irq_to_hw(virq); | ||
120 | |||
121 | spin_lock_irqsave(&gef_pic_lock, flags); | ||
122 | mask = in_be32(gef_pic_irq_reg_base + GEF_PIC_INTR_MASK(0)); | ||
123 | mask &= ~(1 << hwirq); | ||
124 | out_be32(gef_pic_irq_reg_base + GEF_PIC_INTR_MASK(0), mask); | ||
125 | spin_unlock_irqrestore(&gef_pic_lock, flags); | ||
126 | } | ||
127 | |||
128 | static void gef_pic_mask_ack(unsigned int virq) | ||
129 | { | ||
130 | /* Don't think we actually have to do anything to ack an interrupt, | ||
131 | * we just need to clear down the devices interrupt and it will go away | ||
132 | */ | ||
133 | gef_pic_mask(virq); | ||
134 | } | ||
135 | |||
136 | static void gef_pic_unmask(unsigned int virq) | ||
137 | { | ||
138 | unsigned long flags; | ||
139 | unsigned int hwirq; | ||
140 | u32 mask; | ||
141 | |||
142 | hwirq = gef_irq_to_hw(virq); | ||
143 | |||
144 | spin_lock_irqsave(&gef_pic_lock, flags); | ||
145 | mask = in_be32(gef_pic_irq_reg_base + GEF_PIC_INTR_MASK(0)); | ||
146 | mask |= (1 << hwirq); | ||
147 | out_be32(gef_pic_irq_reg_base + GEF_PIC_INTR_MASK(0), mask); | ||
148 | spin_unlock_irqrestore(&gef_pic_lock, flags); | ||
149 | } | ||
150 | |||
151 | static struct irq_chip gef_pic_chip = { | ||
152 | .typename = "gefp", | ||
153 | .mask = gef_pic_mask, | ||
154 | .mask_ack = gef_pic_mask_ack, | ||
155 | .unmask = gef_pic_unmask, | ||
156 | }; | ||
157 | |||
158 | |||
159 | /* When an interrupt is being configured, this call allows some flexibilty | ||
160 | * in deciding which irq_chip structure is used | ||
161 | */ | ||
162 | static int gef_pic_host_map(struct irq_host *h, unsigned int virq, | ||
163 | irq_hw_number_t hwirq) | ||
164 | { | ||
165 | /* All interrupts are LEVEL sensitive */ | ||
166 | get_irq_desc(virq)->status |= IRQ_LEVEL; | ||
167 | set_irq_chip_and_handler(virq, &gef_pic_chip, handle_level_irq); | ||
168 | |||
169 | return 0; | ||
170 | } | ||
171 | |||
172 | static int gef_pic_host_xlate(struct irq_host *h, struct device_node *ct, | ||
173 | u32 *intspec, unsigned int intsize, | ||
174 | irq_hw_number_t *out_hwirq, unsigned int *out_flags) | ||
175 | { | ||
176 | |||
177 | *out_hwirq = intspec[0]; | ||
178 | if (intsize > 1) | ||
179 | *out_flags = intspec[1]; | ||
180 | else | ||
181 | *out_flags = IRQ_TYPE_LEVEL_HIGH; | ||
182 | |||
183 | return 0; | ||
184 | } | ||
185 | |||
186 | static struct irq_host_ops gef_pic_host_ops = { | ||
187 | .map = gef_pic_host_map, | ||
188 | .xlate = gef_pic_host_xlate, | ||
189 | }; | ||
190 | |||
191 | |||
192 | /* | ||
193 | * Initialisation of PIC, this should be called in BSP | ||
194 | */ | ||
195 | void __init gef_pic_init(struct device_node *np) | ||
196 | { | ||
197 | unsigned long flags; | ||
198 | |||
199 | /* Map the devices registers into memory */ | ||
200 | gef_pic_irq_reg_base = of_iomap(np, 0); | ||
201 | |||
202 | spin_lock_irqsave(&gef_pic_lock, flags); | ||
203 | |||
204 | /* Initialise everything as masked. */ | ||
205 | out_be32(gef_pic_irq_reg_base + GEF_PIC_CPU0_INTR_MASK, 0); | ||
206 | out_be32(gef_pic_irq_reg_base + GEF_PIC_CPU1_INTR_MASK, 0); | ||
207 | |||
208 | out_be32(gef_pic_irq_reg_base + GEF_PIC_CPU0_MCP_MASK, 0); | ||
209 | out_be32(gef_pic_irq_reg_base + GEF_PIC_CPU1_MCP_MASK, 0); | ||
210 | |||
211 | spin_unlock_irqrestore(&gef_pic_lock, flags); | ||
212 | |||
213 | /* Map controller */ | ||
214 | gef_pic_cascade_irq = irq_of_parse_and_map(np, 0); | ||
215 | if (gef_pic_cascade_irq == NO_IRQ) { | ||
216 | printk(KERN_ERR "SBC610: failed to map cascade interrupt"); | ||
217 | return; | ||
218 | } | ||
219 | |||
220 | /* Setup an irq_host structure */ | ||
221 | gef_pic_irq_host = irq_alloc_host(np, IRQ_HOST_MAP_LINEAR, | ||
222 | GEF_PIC_NUM_IRQS, | ||
223 | &gef_pic_host_ops, NO_IRQ); | ||
224 | if (gef_pic_irq_host == NULL) | ||
225 | return; | ||
226 | |||
227 | /* Chain with parent controller */ | ||
228 | set_irq_chained_handler(gef_pic_cascade_irq, gef_pic_cascade); | ||
229 | } | ||
230 | |||
231 | /* | ||
232 | * This is called when we receive an interrupt with apparently comes from this | ||
233 | * chip - check, returning the highest interrupt generated or return NO_IRQ | ||
234 | */ | ||
235 | unsigned int gef_pic_get_irq(void) | ||
236 | { | ||
237 | u32 cause, mask, active; | ||
238 | unsigned int virq = NO_IRQ; | ||
239 | int hwirq; | ||
240 | |||
241 | cause = in_be32(gef_pic_irq_reg_base + GEF_PIC_INTR_STATUS); | ||
242 | |||
243 | mask = in_be32(gef_pic_irq_reg_base + GEF_PIC_INTR_MASK(0)); | ||
244 | |||
245 | active = cause & mask; | ||
246 | |||
247 | if (active) { | ||
248 | for (hwirq = GEF_PIC_NUM_IRQS - 1; hwirq > -1; hwirq--) { | ||
249 | if (active & (0x1 << hwirq)) | ||
250 | break; | ||
251 | } | ||
252 | virq = irq_linear_revmap(gef_pic_irq_host, | ||
253 | (irq_hw_number_t)hwirq); | ||
254 | } | ||
255 | |||
256 | return virq; | ||
257 | } | ||
258 | |||
diff --git a/arch/powerpc/platforms/86xx/gef_pic.h b/arch/powerpc/platforms/86xx/gef_pic.h new file mode 100644 index 000000000000..6149916da3f4 --- /dev/null +++ b/arch/powerpc/platforms/86xx/gef_pic.h | |||
@@ -0,0 +1,11 @@ | |||
1 | #ifndef __GEF_PIC_H__ | ||
2 | #define __GEF_PIC_H__ | ||
3 | |||
4 | #include <linux/init.h> | ||
5 | |||
6 | void gef_pic_cascade(unsigned int, struct irq_desc *); | ||
7 | unsigned int gef_pic_get_irq(void); | ||
8 | void gef_pic_init(struct device_node *); | ||
9 | |||
10 | #endif /* __GEF_PIC_H__ */ | ||
11 | |||
diff --git a/arch/powerpc/platforms/86xx/gef_sbc610.c b/arch/powerpc/platforms/86xx/gef_sbc610.c index ee215002b1cf..821c45fac18b 100644 --- a/arch/powerpc/platforms/86xx/gef_sbc610.c +++ b/arch/powerpc/platforms/86xx/gef_sbc610.c | |||
@@ -39,6 +39,7 @@ | |||
39 | #include <sysdev/fsl_soc.h> | 39 | #include <sysdev/fsl_soc.h> |
40 | 40 | ||
41 | #include "mpc86xx.h" | 41 | #include "mpc86xx.h" |
42 | #include "gef_pic.h" | ||
42 | 43 | ||
43 | #undef DEBUG | 44 | #undef DEBUG |
44 | 45 | ||
@@ -48,8 +49,31 @@ | |||
48 | #define DBG (fmt...) do { } while (0) | 49 | #define DBG (fmt...) do { } while (0) |
49 | #endif | 50 | #endif |
50 | 51 | ||
52 | void __iomem *sbc610_regs; | ||
53 | |||
54 | static void __init gef_sbc610_init_irq(void) | ||
55 | { | ||
56 | struct device_node *cascade_node = NULL; | ||
57 | |||
58 | mpc86xx_init_irq(); | ||
59 | |||
60 | /* | ||
61 | * There is a simple interrupt handler in the main FPGA, this needs | ||
62 | * to be cascaded into the MPIC | ||
63 | */ | ||
64 | cascade_node = of_find_compatible_node(NULL, NULL, "gef,fpga-pic"); | ||
65 | if (!cascade_node) { | ||
66 | printk(KERN_WARNING "SBC610: No FPGA PIC\n"); | ||
67 | return; | ||
68 | } | ||
69 | |||
70 | gef_pic_init(cascade_node); | ||
71 | of_node_put(cascade_node); | ||
72 | } | ||
73 | |||
51 | static void __init gef_sbc610_setup_arch(void) | 74 | static void __init gef_sbc610_setup_arch(void) |
52 | { | 75 | { |
76 | struct device_node *regs; | ||
53 | #ifdef CONFIG_PCI | 77 | #ifdef CONFIG_PCI |
54 | struct device_node *np; | 78 | struct device_node *np; |
55 | 79 | ||
@@ -63,8 +87,43 @@ static void __init gef_sbc610_setup_arch(void) | |||
63 | #ifdef CONFIG_SMP | 87 | #ifdef CONFIG_SMP |
64 | mpc86xx_smp_init(); | 88 | mpc86xx_smp_init(); |
65 | #endif | 89 | #endif |
90 | |||
91 | /* Remap basic board registers */ | ||
92 | regs = of_find_compatible_node(NULL, NULL, "gef,fpga-regs"); | ||
93 | if (regs) { | ||
94 | sbc610_regs = of_iomap(regs, 0); | ||
95 | if (sbc610_regs == NULL) | ||
96 | printk(KERN_WARNING "Unable to map board registers\n"); | ||
97 | of_node_put(regs); | ||
98 | } | ||
99 | } | ||
100 | |||
101 | /* Return the PCB revision */ | ||
102 | static unsigned int gef_sbc610_get_pcb_rev(void) | ||
103 | { | ||
104 | unsigned int reg; | ||
105 | |||
106 | reg = ioread32(sbc610_regs); | ||
107 | return (reg >> 8) & 0xff; | ||
108 | } | ||
109 | |||
110 | /* Return the board (software) revision */ | ||
111 | static unsigned int gef_sbc610_get_board_rev(void) | ||
112 | { | ||
113 | unsigned int reg; | ||
114 | |||
115 | reg = ioread32(sbc610_regs); | ||
116 | return (reg >> 16) & 0xff; | ||
66 | } | 117 | } |
67 | 118 | ||
119 | /* Return the FPGA revision */ | ||
120 | static unsigned int gef_sbc610_get_fpga_rev(void) | ||
121 | { | ||
122 | unsigned int reg; | ||
123 | |||
124 | reg = ioread32(sbc610_regs); | ||
125 | return (reg >> 24) & 0xf; | ||
126 | } | ||
68 | 127 | ||
69 | static void gef_sbc610_show_cpuinfo(struct seq_file *m) | 128 | static void gef_sbc610_show_cpuinfo(struct seq_file *m) |
70 | { | 129 | { |
@@ -73,6 +132,10 @@ static void gef_sbc610_show_cpuinfo(struct seq_file *m) | |||
73 | 132 | ||
74 | seq_printf(m, "Vendor\t\t: GE Fanuc Intelligent Platforms\n"); | 133 | seq_printf(m, "Vendor\t\t: GE Fanuc Intelligent Platforms\n"); |
75 | 134 | ||
135 | seq_printf(m, "Revision\t: %u%c\n", gef_sbc610_get_pcb_rev(), | ||
136 | ('A' + gef_sbc610_get_board_rev() - 1)); | ||
137 | seq_printf(m, "FPGA Revision\t: %u\n", gef_sbc610_get_fpga_rev()); | ||
138 | |||
76 | seq_printf(m, "SVR\t\t: 0x%x\n", svid); | 139 | seq_printf(m, "SVR\t\t: 0x%x\n", svid); |
77 | seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024)); | 140 | seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024)); |
78 | } | 141 | } |
@@ -145,7 +208,7 @@ define_machine(gef_sbc610) { | |||
145 | .name = "GE Fanuc SBC610", | 208 | .name = "GE Fanuc SBC610", |
146 | .probe = gef_sbc610_probe, | 209 | .probe = gef_sbc610_probe, |
147 | .setup_arch = gef_sbc610_setup_arch, | 210 | .setup_arch = gef_sbc610_setup_arch, |
148 | .init_IRQ = mpc86xx_init_irq, | 211 | .init_IRQ = gef_sbc610_init_irq, |
149 | .show_cpuinfo = gef_sbc610_show_cpuinfo, | 212 | .show_cpuinfo = gef_sbc610_show_cpuinfo, |
150 | .get_irq = mpic_get_irq, | 213 | .get_irq = mpic_get_irq, |
151 | .restart = fsl_rstcr_restart, | 214 | .restart = fsl_rstcr_restart, |
diff --git a/arch/powerpc/platforms/86xx/mpc8610_hpcd.c b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c index 5eedb710896e..e8d54ac5292c 100644 --- a/arch/powerpc/platforms/86xx/mpc8610_hpcd.c +++ b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c | |||
@@ -238,7 +238,6 @@ static void __init mpc86xx_hpcd_setup_arch(void) | |||
238 | } | 238 | } |
239 | #endif | 239 | #endif |
240 | #if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE) | 240 | #if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE) |
241 | preallocate_diu_videomemory(); | ||
242 | diu_ops.get_pixel_format = mpc8610hpcd_get_pixel_format; | 241 | diu_ops.get_pixel_format = mpc8610hpcd_get_pixel_format; |
243 | diu_ops.set_gamma_table = mpc8610hpcd_set_gamma_table; | 242 | diu_ops.set_gamma_table = mpc8610hpcd_set_gamma_table; |
244 | diu_ops.set_monitor_port = mpc8610hpcd_set_monitor_port; | 243 | diu_ops.set_monitor_port = mpc8610hpcd_set_monitor_port; |
diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig index 9578c45b04fe..47e956c871fe 100644 --- a/arch/powerpc/platforms/Kconfig +++ b/arch/powerpc/platforms/Kconfig | |||
@@ -239,7 +239,8 @@ config TAU_AVERAGE | |||
239 | If in doubt, say N here. | 239 | If in doubt, say N here. |
240 | 240 | ||
241 | config QUICC_ENGINE | 241 | config QUICC_ENGINE |
242 | bool | 242 | bool "Freescale QUICC Engine (QE) Support" |
243 | depends on FSL_SOC | ||
243 | select PPC_LIB_RHEAP | 244 | select PPC_LIB_RHEAP |
244 | select CRC32 | 245 | select CRC32 |
245 | help | 246 | help |
@@ -248,6 +249,15 @@ config QUICC_ENGINE | |||
248 | Selecting this option means that you wish to build a kernel | 249 | Selecting this option means that you wish to build a kernel |
249 | for a machine with a QE coprocessor. | 250 | for a machine with a QE coprocessor. |
250 | 251 | ||
252 | config QE_GPIO | ||
253 | bool "QE GPIO support" | ||
254 | depends on QUICC_ENGINE | ||
255 | select GENERIC_GPIO | ||
256 | select ARCH_REQUIRE_GPIOLIB | ||
257 | help | ||
258 | Say Y here if you're going to use hardware that connects to the | ||
259 | QE GPIOs. | ||
260 | |||
251 | config CPM2 | 261 | config CPM2 |
252 | bool "Enable support for the CPM2 (Communications Processor Module)" | 262 | bool "Enable support for the CPM2 (Communications Processor Module)" |
253 | depends on MPC85xx || 8260 | 263 | depends on MPC85xx || 8260 |
diff --git a/arch/powerpc/sysdev/fsl_lbc.c b/arch/powerpc/sysdev/fsl_lbc.c index 422c8faef593..0494ee55920f 100644 --- a/arch/powerpc/sysdev/fsl_lbc.c +++ b/arch/powerpc/sysdev/fsl_lbc.c | |||
@@ -11,14 +11,19 @@ | |||
11 | * (at your option) any later version. | 11 | * (at your option) any later version. |
12 | */ | 12 | */ |
13 | 13 | ||
14 | #include <linux/init.h> | ||
15 | #include <linux/module.h> | ||
14 | #include <linux/kernel.h> | 16 | #include <linux/kernel.h> |
17 | #include <linux/compiler.h> | ||
18 | #include <linux/spinlock.h> | ||
19 | #include <linux/types.h> | ||
20 | #include <linux/io.h> | ||
15 | #include <linux/of.h> | 21 | #include <linux/of.h> |
22 | #include <asm/prom.h> | ||
16 | #include <asm/fsl_lbc.h> | 23 | #include <asm/fsl_lbc.h> |
17 | 24 | ||
18 | spinlock_t fsl_lbc_lock = __SPIN_LOCK_UNLOCKED(fsl_lbc_lock); | 25 | static spinlock_t fsl_lbc_lock = __SPIN_LOCK_UNLOCKED(fsl_lbc_lock); |
19 | 26 | static struct fsl_lbc_regs __iomem *fsl_lbc_regs; | |
20 | struct fsl_lbc_regs __iomem *fsl_lbc_regs; | ||
21 | EXPORT_SYMBOL(fsl_lbc_regs); | ||
22 | 27 | ||
23 | static char __initdata *compat_lbc[] = { | 28 | static char __initdata *compat_lbc[] = { |
24 | "fsl,pq2-localbus", | 29 | "fsl,pq2-localbus", |
@@ -127,3 +132,43 @@ int fsl_upm_find(phys_addr_t addr_base, struct fsl_upm *upm) | |||
127 | return 0; | 132 | return 0; |
128 | } | 133 | } |
129 | EXPORT_SYMBOL(fsl_upm_find); | 134 | EXPORT_SYMBOL(fsl_upm_find); |
135 | |||
136 | /** | ||
137 | * fsl_upm_run_pattern - actually run an UPM pattern | ||
138 | * @upm: pointer to the fsl_upm structure obtained via fsl_upm_find | ||
139 | * @io_base: remapped pointer to where memory access should happen | ||
140 | * @mar: MAR register content during pattern execution | ||
141 | * | ||
142 | * This function triggers dummy write to the memory specified by the io_base, | ||
143 | * thus UPM pattern actually executed. Note that mar usage depends on the | ||
144 | * pre-programmed AMX bits in the UPM RAM. | ||
145 | */ | ||
146 | int fsl_upm_run_pattern(struct fsl_upm *upm, void __iomem *io_base, u32 mar) | ||
147 | { | ||
148 | int ret = 0; | ||
149 | unsigned long flags; | ||
150 | |||
151 | spin_lock_irqsave(&fsl_lbc_lock, flags); | ||
152 | |||
153 | out_be32(&fsl_lbc_regs->mar, mar << (32 - upm->width)); | ||
154 | |||
155 | switch (upm->width) { | ||
156 | case 8: | ||
157 | out_8(io_base, 0x0); | ||
158 | break; | ||
159 | case 16: | ||
160 | out_be16(io_base, 0x0); | ||
161 | break; | ||
162 | case 32: | ||
163 | out_be32(io_base, 0x0); | ||
164 | break; | ||
165 | default: | ||
166 | ret = -EINVAL; | ||
167 | break; | ||
168 | } | ||
169 | |||
170 | spin_unlock_irqrestore(&fsl_lbc_lock, flags); | ||
171 | |||
172 | return ret; | ||
173 | } | ||
174 | EXPORT_SYMBOL(fsl_upm_run_pattern); | ||
diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c index 61e6d77efa4f..5b264eb4b1f7 100644 --- a/arch/powerpc/sysdev/fsl_pci.c +++ b/arch/powerpc/sysdev/fsl_pci.c | |||
@@ -1,7 +1,7 @@ | |||
1 | /* | 1 | /* |
2 | * MPC85xx/86xx PCI/PCIE support routing. | 2 | * MPC83xx/85xx/86xx PCI/PCIE support routing. |
3 | * | 3 | * |
4 | * Copyright 2007 Freescale Semiconductor, Inc | 4 | * Copyright 2007,2008 Freescale Semiconductor, Inc |
5 | * | 5 | * |
6 | * Initial author: Xianghua Xiao <x.xiao@freescale.com> | 6 | * Initial author: Xianghua Xiao <x.xiao@freescale.com> |
7 | * Recode: ZHANG WEI <wei.zhang@freescale.com> | 7 | * Recode: ZHANG WEI <wei.zhang@freescale.com> |
@@ -251,20 +251,47 @@ DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8641D, quirk_fsl_pcie_header); | |||
251 | DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8610, quirk_fsl_pcie_header); | 251 | DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8610, quirk_fsl_pcie_header); |
252 | #endif /* CONFIG_PPC_85xx || CONFIG_PPC_86xx */ | 252 | #endif /* CONFIG_PPC_85xx || CONFIG_PPC_86xx */ |
253 | 253 | ||
254 | #if defined(CONFIG_PPC_83xx) | 254 | #if defined(CONFIG_PPC_83xx) || defined(CONFIG_PPC_MPC512x) |
255 | int __init mpc83xx_add_bridge(struct device_node *dev) | 255 | int __init mpc83xx_add_bridge(struct device_node *dev) |
256 | { | 256 | { |
257 | int len; | 257 | int len; |
258 | struct pci_controller *hose; | 258 | struct pci_controller *hose; |
259 | struct resource rsrc; | 259 | struct resource rsrc_reg; |
260 | struct resource rsrc_cfg; | ||
260 | const int *bus_range; | 261 | const int *bus_range; |
261 | int primary = 1, has_address = 0; | 262 | int primary; |
262 | phys_addr_t immr = get_immrbase(); | ||
263 | 263 | ||
264 | pr_debug("Adding PCI host bridge %s\n", dev->full_name); | 264 | pr_debug("Adding PCI host bridge %s\n", dev->full_name); |
265 | 265 | ||
266 | /* Fetch host bridge registers address */ | 266 | /* Fetch host bridge registers address */ |
267 | has_address = (of_address_to_resource(dev, 0, &rsrc) == 0); | 267 | if (of_address_to_resource(dev, 0, &rsrc_reg)) { |
268 | printk(KERN_WARNING "Can't get pci register base!\n"); | ||
269 | return -ENOMEM; | ||
270 | } | ||
271 | |||
272 | memset(&rsrc_cfg, 0, sizeof(rsrc_cfg)); | ||
273 | |||
274 | if (of_address_to_resource(dev, 1, &rsrc_cfg)) { | ||
275 | printk(KERN_WARNING | ||
276 | "No pci config register base in dev tree, " | ||
277 | "using default\n"); | ||
278 | /* | ||
279 | * MPC83xx supports up to two host controllers | ||
280 | * one at 0x8500 has config space registers at 0x8300 | ||
281 | * one at 0x8600 has config space registers at 0x8380 | ||
282 | */ | ||
283 | if ((rsrc_reg.start & 0xfffff) == 0x8500) | ||
284 | rsrc_cfg.start = (rsrc_reg.start & 0xfff00000) + 0x8300; | ||
285 | else if ((rsrc_reg.start & 0xfffff) == 0x8600) | ||
286 | rsrc_cfg.start = (rsrc_reg.start & 0xfff00000) + 0x8380; | ||
287 | } | ||
288 | /* | ||
289 | * Controller at offset 0x8500 is primary | ||
290 | */ | ||
291 | if ((rsrc_reg.start & 0xfffff) == 0x8500) | ||
292 | primary = 1; | ||
293 | else | ||
294 | primary = 0; | ||
268 | 295 | ||
269 | /* Get bus range if any */ | 296 | /* Get bus range if any */ |
270 | bus_range = of_get_property(dev, "bus-range", &len); | 297 | bus_range = of_get_property(dev, "bus-range", &len); |
@@ -281,22 +308,11 @@ int __init mpc83xx_add_bridge(struct device_node *dev) | |||
281 | hose->first_busno = bus_range ? bus_range[0] : 0; | 308 | hose->first_busno = bus_range ? bus_range[0] : 0; |
282 | hose->last_busno = bus_range ? bus_range[1] : 0xff; | 309 | hose->last_busno = bus_range ? bus_range[1] : 0xff; |
283 | 310 | ||
284 | /* MPC83xx supports up to two host controllers one at 0x8500 from immrbar | 311 | setup_indirect_pci(hose, rsrc_cfg.start, rsrc_cfg.start + 4, 0); |
285 | * the other at 0x8600, we consider the 0x8500 the primary controller | ||
286 | */ | ||
287 | /* PCI 1 */ | ||
288 | if ((rsrc.start & 0xfffff) == 0x8500) { | ||
289 | setup_indirect_pci(hose, immr + 0x8300, immr + 0x8304, 0); | ||
290 | } | ||
291 | /* PCI 2 */ | ||
292 | if ((rsrc.start & 0xfffff) == 0x8600) { | ||
293 | setup_indirect_pci(hose, immr + 0x8380, immr + 0x8384, 0); | ||
294 | primary = 0; | ||
295 | } | ||
296 | 312 | ||
297 | printk(KERN_INFO "Found MPC83xx PCI host bridge at 0x%016llx. " | 313 | printk(KERN_INFO "Found FSL PCI host bridge at 0x%016llx. " |
298 | "Firmware bus number: %d->%d\n", | 314 | "Firmware bus number: %d->%d\n", |
299 | (unsigned long long)rsrc.start, hose->first_busno, | 315 | (unsigned long long)rsrc_reg.start, hose->first_busno, |
300 | hose->last_busno); | 316 | hose->last_busno); |
301 | 317 | ||
302 | pr_debug(" ->Hose at 0x%p, cfg_addr=0x%p,cfg_data=0x%p\n", | 318 | pr_debug(" ->Hose at 0x%p, cfg_addr=0x%p,cfg_data=0x%p\n", |
diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c index eeb07007c753..01b884b25696 100644 --- a/arch/powerpc/sysdev/fsl_soc.c +++ b/arch/powerpc/sysdev/fsl_soc.c | |||
@@ -720,42 +720,6 @@ void fsl_rstcr_restart(char *cmd) | |||
720 | #endif | 720 | #endif |
721 | 721 | ||
722 | #if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE) | 722 | #if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE) |
723 | struct platform_diu_data_ops diu_ops = { | 723 | struct platform_diu_data_ops diu_ops; |
724 | .diu_size = 1280 * 1024 * 4, /* default one 1280x1024 buffer */ | ||
725 | }; | ||
726 | EXPORT_SYMBOL(diu_ops); | 724 | EXPORT_SYMBOL(diu_ops); |
727 | |||
728 | int __init preallocate_diu_videomemory(void) | ||
729 | { | ||
730 | pr_debug("diu_size=%lu\n", diu_ops.diu_size); | ||
731 | |||
732 | diu_ops.diu_mem = __alloc_bootmem(diu_ops.diu_size, 8, 0); | ||
733 | if (!diu_ops.diu_mem) { | ||
734 | printk(KERN_ERR "fsl-diu: cannot allocate %lu bytes\n", | ||
735 | diu_ops.diu_size); | ||
736 | return -ENOMEM; | ||
737 | } | ||
738 | |||
739 | pr_debug("diu_mem=%p\n", diu_ops.diu_mem); | ||
740 | |||
741 | rh_init(&diu_ops.diu_rh_info, 4096, ARRAY_SIZE(diu_ops.diu_rh_block), | ||
742 | diu_ops.diu_rh_block); | ||
743 | return rh_attach_region(&diu_ops.diu_rh_info, | ||
744 | (unsigned long) diu_ops.diu_mem, | ||
745 | diu_ops.diu_size); | ||
746 | } | ||
747 | |||
748 | static int __init early_parse_diufb(char *p) | ||
749 | { | ||
750 | if (!p) | ||
751 | return 1; | ||
752 | |||
753 | diu_ops.diu_size = _ALIGN_UP(memparse(p, &p), 8); | ||
754 | |||
755 | pr_debug("diu_size=%lu\n", diu_ops.diu_size); | ||
756 | |||
757 | return 0; | ||
758 | } | ||
759 | early_param("diufb", early_parse_diufb); | ||
760 | |||
761 | #endif | 725 | #endif |
diff --git a/arch/powerpc/sysdev/fsl_soc.h b/arch/powerpc/sysdev/fsl_soc.h index 024299887352..60f7f227327c 100644 --- a/arch/powerpc/sysdev/fsl_soc.h +++ b/arch/powerpc/sysdev/fsl_soc.h | |||
@@ -20,14 +20,7 @@ extern int fsl_spi_init(struct spi_board_info *board_infos, | |||
20 | extern void fsl_rstcr_restart(char *cmd); | 20 | extern void fsl_rstcr_restart(char *cmd); |
21 | 21 | ||
22 | #if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE) | 22 | #if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE) |
23 | #include <linux/bootmem.h> | ||
24 | #include <asm/rheap.h> | ||
25 | struct platform_diu_data_ops { | 23 | struct platform_diu_data_ops { |
26 | rh_block_t diu_rh_block[16]; | ||
27 | rh_info_t diu_rh_info; | ||
28 | unsigned long diu_size; | ||
29 | void *diu_mem; | ||
30 | |||
31 | unsigned int (*get_pixel_format) (unsigned int bits_per_pixel, | 24 | unsigned int (*get_pixel_format) (unsigned int bits_per_pixel, |
32 | int monitor_port); | 25 | int monitor_port); |
33 | void (*set_gamma_table) (int monitor_port, char *gamma_table_base); | 26 | void (*set_gamma_table) (int monitor_port, char *gamma_table_base); |
@@ -38,7 +31,6 @@ struct platform_diu_data_ops { | |||
38 | }; | 31 | }; |
39 | 32 | ||
40 | extern struct platform_diu_data_ops diu_ops; | 33 | extern struct platform_diu_data_ops diu_ops; |
41 | int __init preallocate_diu_videomemory(void); | ||
42 | #endif | 34 | #endif |
43 | 35 | ||
44 | #endif | 36 | #endif |
diff --git a/arch/powerpc/sysdev/qe_lib/Kconfig b/arch/powerpc/sysdev/qe_lib/Kconfig index 1ce546462be5..76ffbc48d4b9 100644 --- a/arch/powerpc/sysdev/qe_lib/Kconfig +++ b/arch/powerpc/sysdev/qe_lib/Kconfig | |||
@@ -24,12 +24,3 @@ config QE_USB | |||
24 | bool | 24 | bool |
25 | help | 25 | help |
26 | QE USB Host Controller support | 26 | QE USB Host Controller support |
27 | |||
28 | config QE_GPIO | ||
29 | bool "QE GPIO support" | ||
30 | depends on QUICC_ENGINE | ||
31 | select GENERIC_GPIO | ||
32 | select ARCH_REQUIRE_GPIOLIB | ||
33 | help | ||
34 | Say Y here if you're going to use hardware that connects to the | ||
35 | QE GPIOs. | ||