powerpc: Implement GPIO driver for simple memory-mapped banks

The driver supports very simple GPIO controllers, that is, when a
controller provides just a 'data' register. Such controllers may be
found in various BCSRs (Board's FPGAs used to control board's
switches, LEDs, chip-selects, Ethernet/USB PHY power, etc).

So far we support only 1-byte GPIO banks. Support for other widths may
be implemented when/if needed.

p.s.
To avoid "made up" compatible entries (like compatible = "simple-gpio"),
boards must call simple_gpiochip_init() to pass the compatible string.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

3 files changed, 168 insertions, 0 deletions

diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile
index 5afce115ab1f..b33b28a6fe12 100644
--- a/arch/powerpc/sysdev/Makefile
+++ b/arch/powerpc/sysdev/Makefile
@@ -17,6 +17,7 @@ obj-$(CONFIG_FSL_PCI)		+= fsl_pci.o $(fsl-msi-obj-y)
 obj-$(CONFIG_FSL_LBC)           += fsl_lbc.o
 obj-$(CONFIG_FSL_GTM)           += fsl_gtm.o
 obj-$(CONFIG_MPC8xxx_GPIO)      += mpc8xxx_gpio.o
+obj-$(CONFIG_SIMPLE_GPIO)       += simple_gpio.o
 obj-$(CONFIG_RAPIDIO)           += fsl_rio.o
 obj-$(CONFIG_TSI108_BRIDGE)     += tsi108_pci.o tsi108_dev.o
 obj-$(CONFIG_QUICC_ENGINE)      += qe_lib/
diff --git a/arch/powerpc/sysdev/simple_gpio.c b/arch/powerpc/sysdev/simple_gpio.c
new file mode 100644
index 000000000000..43c4569e24b7
--- /dev/null
+++ b/arch/powerpc/sysdev/simple_gpio.c
@@ -0,0 +1,155 @@
+/*
+ * Simple Memory-Mapped GPIOs
+ *
+ * Copyright (c) MontaVista Software, Inc. 2008.
+ *
+ * Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/types.h>
+#include <linux/ioport.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
+#include <linux/gpio.h>
+#include <asm/prom.h>
+#include "simple_gpio.h"
+
+struct u8_gpio_chip {
+        struct of_mm_gpio_chip mm_gc;
+        spinlock_t lock;
+
+        /* shadowed data register to clear/set bits safely */
+        u8 data;
+};
+
+static struct u8_gpio_chip *to_u8_gpio_chip(struct of_mm_gpio_chip *mm_gc)
+{
+        return container_of(mm_gc, struct u8_gpio_chip, mm_gc);
+}
+
+static u8 u8_pin2mask(unsigned int pin)
+{
+        return 1 << (8 - 1 - pin);
+}
+
+static int u8_gpio_get(struct gpio_chip *gc, unsigned int gpio)
+{
+        struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+
+        return in_8(mm_gc->regs) & u8_pin2mask(gpio);
+}
+
+static void u8_gpio_set(struct gpio_chip *gc, unsigned int gpio, int val)
+{
+        struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+        struct u8_gpio_chip *u8_gc = to_u8_gpio_chip(mm_gc);
+        unsigned long flags;
+
+        spin_lock_irqsave(&u8_gc->lock, flags);
+
+        if (val)
+                u8_gc->data |= u8_pin2mask(gpio);
+        else
+                u8_gc->data &= ~u8_pin2mask(gpio);
+
+        out_8(mm_gc->regs, u8_gc->data);
+
+        spin_unlock_irqrestore(&u8_gc->lock, flags);
+}
+
+static int u8_gpio_dir_in(struct gpio_chip *gc, unsigned int gpio)
+{
+        return 0;
+}
+
+static int u8_gpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
+{
+        u8_gpio_set(gc, gpio, val);
+        return 0;
+}
+
+static void u8_gpio_save_regs(struct of_mm_gpio_chip *mm_gc)
+{
+        struct u8_gpio_chip *u8_gc = to_u8_gpio_chip(mm_gc);
+
+        u8_gc->data = in_8(mm_gc->regs);
+}
+
+static int __init u8_simple_gpiochip_add(struct device_node *np)
+{
+        int ret;
+        struct u8_gpio_chip *u8_gc;
+        struct of_mm_gpio_chip *mm_gc;
+        struct of_gpio_chip *of_gc;
+        struct gpio_chip *gc;
+
+        u8_gc = kzalloc(sizeof(*u8_gc), GFP_KERNEL);
+        if (!u8_gc)
+                return -ENOMEM;
+
+        spin_lock_init(&u8_gc->lock);
+
+        mm_gc = &u8_gc->mm_gc;
+        of_gc = &mm_gc->of_gc;
+        gc = &of_gc->gc;
+
+        mm_gc->save_regs = u8_gpio_save_regs;
+        of_gc->gpio_cells = 2;
+        gc->ngpio = 8;
+        gc->direction_input = u8_gpio_dir_in;
+        gc->direction_output = u8_gpio_dir_out;
+        gc->get = u8_gpio_get;
+        gc->set = u8_gpio_set;
+
+        ret = of_mm_gpiochip_add(np, mm_gc);
+        if (ret)
+                goto err;
+        return 0;
+err:
+        kfree(u8_gc);
+        return ret;
+}
+
+void __init simple_gpiochip_init(const char *compatible)
+{
+        struct device_node *np;
+
+        for_each_compatible_node(np, NULL, compatible) {
+                int ret;
+                struct resource r;
+
+                ret = of_address_to_resource(np, 0, &r);
+                if (ret)
+                        goto err;
+
+                switch (resource_size(&r)) {
+                case 1:
+                        ret = u8_simple_gpiochip_add(np);
+                        if (ret)
+                                goto err;
+                        break;
+                default:
+                        /*
+                         * Whenever you need support for GPIO bank width > 1,
+                         * please just turn u8_ code into huge macros, and
+                         * construct needed uX_ code with it.
+                         */
+                        ret = -ENOSYS;
+                        goto err;
+                }
+                continue;
+err:
+                pr_err("%s: registration failed, status %d\n",
+                       np->full_name, ret);
+        }
+}
diff --git a/arch/powerpc/sysdev/simple_gpio.h b/arch/powerpc/sysdev/simple_gpio.h
new file mode 100644
index 000000000000..3a7b0c513c76
--- /dev/null
+++ b/arch/powerpc/sysdev/simple_gpio.h
@@ -0,0 +1,12 @@
+#ifndef __SYSDEV_SIMPLE_GPIO_H
+#define __SYSDEV_SIMPLE_GPIO_H
+
+#include <linux/errno.h>
+
+#ifdef CONFIG_SIMPLE_GPIO
+extern void simple_gpiochip_init(const char *compatible);
+#else
+static inline void simple_gpiochip_init(const char *compatible) {}
+#endif /* CONFIG_SIMPLE_GPIO */
+
+#endif /* __SYSDEV_SIMPLE_GPIO_H */