[RAPIDIO] Add OF-tree support to RapidIO controller driver

This initializes the RapidIO controller driver using addresses and
interrupt numbers obtained from the firmware device tree, rather than
using hardcoded constants.

Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

2 files changed, 102 insertions, 28 deletions

diff --git a/arch/powerpc/sysdev/fsl_rio.c b/arch/powerpc/sysdev/fsl_rio.c
index 80acc7940194..d2d14708e714 100644
--- a/arch/powerpc/sysdev/fsl_rio.c
+++ b/arch/powerpc/sysdev/fsl_rio.c
@@ -20,6 +20,7 @@
 #include <linux/interrupt.h>
 #include <linux/rio.h>
 #include <linux/rio_drv.h>
+#include <linux/of_platform.h>
 
 #include <asm/io.h>
 
@@ -28,7 +29,6 @@
 #define IRQ_RIO_TX(m)           (((struct rio_priv *)(m->priv))->txirq)
 #define IRQ_RIO_RX(m)           (((struct rio_priv *)(m->priv))->rxirq)
 
-#define RIO_REGS_BASE           (CCSRBAR + 0xc0000)
 #define RIO_ATMU_REGS_OFFSET    0x10c00
 #define RIO_MSG_REGS_OFFSET     0x11000
 #define RIO_MAINT_WIN_SIZE      0x400000
@@ -905,19 +905,66 @@ __setup("riohdid=", fsl_rio_get_cmdline);
 
 /**
  * fsl_rio_setup - Setup MPC85xx RapidIO interface
- * @law_start: Starting physical address of RapidIO LAW
- * @law_size: Size of RapidIO LAW
+ * @fsl_rio_setup - Setup Freescale PowerPC RapidIO interface
  *
  * Initializes MPC85xx RapidIO hardware interface, configures
  * master port with system-specific info, and registers the
  * master port with the RapidIO subsystem.
  */
-void fsl_rio_setup(int law_start, int law_size)
+int fsl_rio_setup(struct of_device *dev)
 {
         struct rio_ops *ops;
         struct rio_mport *port;
-        struct rio_priv *priv = NULL;
-        int rc;
+        struct rio_priv *priv;
+        int rc = 0;
+        const u32 *dt_range, *cell;
+        struct resource regs;
+        int rlen;
+        u64 law_start, law_size;
+        int paw, aw, sw;
+
+        if (!dev->node) {
+                dev_err(&dev->dev, "Device OF-Node is NULL");
+                return -EFAULT;
+        }
+
+        rc = of_address_to_resource(dev->node, 0, &regs);
+        if (rc) {
+                dev_err(&dev->dev, "Can't get %s property 'reg'\n",
+                                dev->node->full_name);
+                return -EFAULT;
+        }
+        dev_info(&dev->dev, "Of-device full name %s\n", dev->node->full_name);
+        dev_info(&dev->dev, "Regs start 0x%08x size 0x%08x\n",  regs.start,
+                                                regs.end - regs.start + 1);
+
+        dt_range = of_get_property(dev->node, "ranges", &rlen);
+        if (!dt_range) {
+                dev_err(&dev->dev, "Can't get %s property 'ranges'\n",
+                                dev->node->full_name);
+                return -EFAULT;
+        }
+
+        /* Get node address wide */
+        cell = of_get_property(dev->node, "#address-cells", NULL);
+        if (cell)
+                aw = *cell;
+        else
+                aw = of_n_addr_cells(dev->node);
+        /* Get node size wide */
+        cell = of_get_property(dev->node, "#size-cells", NULL);
+        if (cell)
+                sw = *cell;
+        else
+                sw = of_n_size_cells(dev->node);
+        /* Get parent address wide wide */
+        paw = of_n_addr_cells(dev->node);
+
+        law_start = of_read_number(dt_range + aw, paw);
+        law_size = of_read_number(dt_range + aw + paw, sw);
+
+        dev_info(&dev->dev, "LAW start 0x%016llx, size 0x%016llx.\n",
+                        law_start, law_size);
 
         ops = kmalloc(sizeof(struct rio_ops), GFP_KERNEL);
         ops->lcread = fsl_local_config_read;
@@ -942,6 +989,12 @@ void fsl_rio_setup(int law_start, int law_size)
         port->iores.end = law_start + law_size;
         port->iores.flags = IORESOURCE_MEM;
 
+        priv->bellirq = irq_of_parse_and_map(dev->node, 2);
+        priv->txirq = irq_of_parse_and_map(dev->node, 3);
+        priv->rxirq = irq_of_parse_and_map(dev->node, 4);
+        dev_info(&dev->dev, "bellirq: %d, txirq: %d, rxirq %d\n", priv->bellirq,
+                                priv->txirq, priv->rxirq);
+
         rio_init_dbell_res(&port->riores[RIO_DOORBELL_RESOURCE], 0, 0xffff);
         rio_init_mbox_res(&port->riores[RIO_INB_MBOX_RESOURCE], 0, 0);
         rio_init_mbox_res(&port->riores[RIO_OUTB_MBOX_RESOURCE], 0, 0);
@@ -953,7 +1006,7 @@ void fsl_rio_setup(int law_start, int law_size)
         port->priv = priv;
         rio_register_mport(port);
 
-        priv->regs_win = ioremap(RIO_REGS_BASE, 0x20000);
+        priv->regs_win = ioremap(regs.start, regs.end - regs.start + 1);
         priv->atmu_regs = (struct rio_atmu_regs *)(priv->regs_win
                                         + RIO_ATMU_REGS_OFFSET);
         priv->maint_atmu_regs = priv->atmu_regs + 1;
@@ -972,10 +1025,51 @@ void fsl_rio_setup(int law_start, int law_size)
         out_be32(&priv->dbell_atmu_regs->rowar, 0x8004200b);
         fsl_rio_doorbell_init(port);
 
-        return;
+        return 0;
 err:
         if (priv)
                 iounmap(priv->regs_win);
+        kfree(ops);
         kfree(priv);
         kfree(port);
+        return rc;
 }
+
+/* The probe function for RapidIO peer-to-peer network.
+ */
+static int __devinit fsl_of_rio_rpn_probe(struct of_device *dev,
+                                     const struct of_device_id *match)
+{
+        int rc;
+        printk(KERN_INFO "Setting up RapidIO peer-to-peer network %s\n",
+                        dev->node->full_name);
+
+        rc = fsl_rio_setup(dev);
+        if (rc)
+                goto out;
+
+        /* Enumerate all registered ports */
+        rc = rio_init_mports();
+out:
+        return rc;
+};
+
+static const struct of_device_id fsl_of_rio_rpn_ids[] = {
+        {
+                .compatible = "fsl,rapidio-delta",
+        },
+        {},
+};
+
+static struct of_platform_driver fsl_of_rio_rpn_driver = {
+        .name = "fsl-of-rio",
+        .match_table = fsl_of_rio_rpn_ids,
+        .probe = fsl_of_rio_rpn_probe,
+};
+
+static __init int fsl_of_rio_rpn_init(void)
+{
+        return of_register_platform_driver(&fsl_of_rio_rpn_driver);
+}
+
+subsys_initcall(fsl_of_rio_rpn_init);
diff --git a/arch/powerpc/sysdev/fsl_rio.h b/arch/powerpc/sysdev/fsl_rio.h
deleted file mode 100644
index 6d3ff30b1579..000000000000
--- a/arch/powerpc/sysdev/fsl_rio.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * MPC85xx RapidIO definitions
- *
- * Copyright 2005 MontaVista Software, Inc.
- * Matt Porter <mporter@kernel.crashing.org>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#ifndef __PPC_SYSLIB_PPC85XX_RIO_H
-#define __PPC_SYSLIB_PPC85XX_RIO_H
-
-#include <linux/init.h>
-
-extern void mpc85xx_rio_setup(int law_start, int law_size);
-
-#endif                          /* __PPC_SYSLIB_PPC85XX_RIO_H */