[POWERPC] Add the use of the firmware soft-reset-nmi to kdump.

With this patch, kdump uses the firmware soft-reset NMI for two purposes:
1) Initiate the kdump (take a crash dump) by issuing a soft-reset.
2) Break a CPU out of a deadlock condition that is detected during kdump
processing.

When a soft-reset is initiated each CPU will enter
system_reset_exception() and set its corresponding bit in the global
bit-array cpus_in_sr then call die(). When die() finds the CPU's bit set
in cpu_in_sr crash_kexec() is called to initiate a crash dump. The first
CPU to enter crash_kexec() is called the "crashing CPU". All other CPUs
are "secondary CPUs". The secondary CPU's pass through to
crash_kexec_secondary() and sleep. The crashing CPU waits for all CPUs
to enter via soft-reset then boots the kdump kernel (see
crash_soft_reset_check())

When the system crashes due to a panic or exception, crash_kexec() is
called by panic() or die(). The crashing CPU sends an IPI to all other
CPUs to notify them of the pending shutdown. If a CPU is in a deadlock
or hung state with interrupts disabled, the IPI will not be delivered.
The result being, that the kdump kernel is not booted. This problem is
solved with the use of a firmware generated soft-reset. After the
crashing_cpu has issued the IPI, it waits for 10 sec for all CPUs to
enter crash_ipi_callback(). A CPU signifies its entry to
crash_ipi_callback() by setting its corresponding bit in the
cpus_in_crash bit array. After 10 sec, if one or more CPUs have not set
their bit in cpus_in_crash we assume that the CPU(s) is deadlocked. The
operator is then prompted to generate a soft-reset to break the
deadlock. Each CPU enters the soft reset handler as described above.

Two conditions must be handled at this point:
1) The system crashed because the operator generated a soft-reset. See
2) The system had crashed before the soft-reset was generated ( in the
case of a Panic or oops).

The first CPU to enter crash_kexec() uses the state of the kexec_lock to
determine this state. If kexec_lock is already held then condition 2 is
true and crash_kexec_secondary() is called, else; this CPU is flagged as
the crashing CPU, the kexec_lock is acquired and crash_kexec() proceeds
as described above.

Each additional CPUs responding to the soft-reset will pass through
crash_kexec() to kexec_secondary(). All secondary CPUs call
crash_ipi_callback() readying them self's for the shutdown. When ready
they clear their bit in cpus_in_sr. The crashing CPU waits in
kexec_secondary() until all other CPUs have cleared their bits in
cpus_in_sr. The kexec kernel boot is then started.

Signed-off-by: Haren Myneni <haren@us.ibm.com>
Signed-off-by: David Wilder <dwilder@us.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

1 files changed, 13 insertions, 14 deletions

diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c
index 52f5659534f4..fa6bd97b6b9d 100644
--- a/arch/powerpc/kernel/traps.c
+++ b/arch/powerpc/kernel/traps.c
@@ -52,9 +52,13 @@
 #include <asm/firmware.h>
 #include <asm/processor.h>
 #endif
+#include <asm/kexec.h>
 
 #ifdef CONFIG_PPC64     /* XXX */
 #define _IO_BASE        pci_io_base
+#ifdef CONFIG_KEXEC
+cpumask_t cpus_in_sr = CPU_MASK_NONE;
+#endif
 #endif
 
 #ifdef CONFIG_DEBUGGER
@@ -97,7 +101,7 @@ static DEFINE_SPINLOCK(die_lock);
 
 int die(const char *str, struct pt_regs *regs, long err)
 {
-        static int die_counter, crash_dump_start = 0;
+        static int die_counter;
 
         if (debugger(regs))
                 return 1;
@@ -137,21 +141,12 @@ int die(const char *str, struct pt_regs *regs, long err)
         print_modules();
         show_regs(regs);
         bust_spinlocks(0);
+        spin_unlock_irq(&die_lock);
 
-        if (!crash_dump_start && kexec_should_crash(current)) {
-                crash_dump_start = 1;
-                spin_unlock_irq(&die_lock);
+        if (kexec_should_crash(current) ||
+                kexec_sr_activated(smp_processor_id()))
                 crash_kexec(regs);
-                /* NOTREACHED */
-        }
-        spin_unlock_irq(&die_lock);
-        if (crash_dump_start)
-                /*
-                 * Only for soft-reset: Other CPUs will be responded to an IPI
-                 * sent by first kexec CPU.
-                 */
-                for(;;)
-                        ;
+        crash_kexec_secondary(regs);
 
         if (in_interrupt())
                 panic("Fatal exception in interrupt");
@@ -215,6 +210,10 @@ void system_reset_exception(struct pt_regs *regs)
                         return;
         }
 
+#ifdef CONFIG_KEXEC
+        cpu_set(smp_processor_id(), cpus_in_sr);
+#endif
+
         die("System Reset", regs, SIGABRT);
 
         /* Must die if the interrupt is not recoverable */