[PATCH] powerpc: Merge cacheflush.h and cache.h

The ppc32 and ppc64 versions of cacheflush.h were almost identical.
The two versions of cache.h are fairly similar, except for a bunch of
register definitions in the ppc32 version which probably belong better
elsewhere.  This patch, therefore, merges both headers.  Notable
points:
	- there are several functions in cacheflush.h which exist only
on ppc32 or only on ppc64.  These are handled by #ifdef for now, but
these should probably be consolidated, along with the actual code
behind them later.
	- Confusingly, both ppc32 and ppc64 have a
flush_dcache_range(), but they're subtly different: it uses dcbf on
ppc32 and dcbst on ppc64, ppc64 has a flush_inval_dcache_range() which
uses dcbf.  These too should be merged and consolidated later.
	- Also flush_dcache_range() was defined in cacheflush.h on
ppc64, and in cache.h on ppc32.  In the merged version it's in
cacheflush.h
	- On ppc32 flush_icache_range() is a normal function from
misc.S.  On ppc64, it was wrapper, testing a feature bit before
calling __flush_icache_range() which does the actual flush.  This
patch takes the ppc64 approach, which amounts to no change on ppc32,
since CPU_FTR_COHERENT_ICACHE will never be set there, but does mean
renaming flush_icache_range() to __flush_icache_range() in
arch/ppc/kernel/misc.S and arch/powerpc/kernel/misc_32.S
	- The PReP register info from asm-ppc/cache.h has moved to
arch/ppc/platforms/prep_setup.c
	- The 8xx register info from asm-ppc/cache.h has moved to a
new asm-powerpc/reg_8xx.h, included from reg.h
	- flush_dcache_all() was defined on ppc32 (only), but was
never called (although it was exported).  Thus this patch removes it
from cacheflush.h and from ARCH=powerpc (misc_32.S) entirely.  It's
left in ARCH=ppc for now, with the prototype moved to ppc_ksyms.c.

Built for Walnut (ARCH=ppc), 32-bit multiplatform (pmac, CHRP and PReP
ARCH=ppc, pmac and CHRP ARCH=powerpc).  Built and booted on POWER5
LPAR (ARCH=powerpc and ARCH=ppc64).

Built for 32-bit powermac (ARCH=ppc and ARCH=powerpc).  Built and
booted on POWER5 LPAR (ARCH=powerpc and ARCH=ppc64).  Built and booted
on G5 (ARCH=powerpc)

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>

1 files changed, 1 insertions, 22 deletions

diff --git a/arch/powerpc/kernel/misc_32.S b/arch/powerpc/kernel/misc_32.S
index 3bedb532aed9..f6d84a75ed26 100644
--- a/arch/powerpc/kernel/misc_32.S
+++ b/arch/powerpc/kernel/misc_32.S
@@ -519,7 +519,7 @@ END_FTR_SECTION_IFCLR(CPU_FTR_SPLIT_ID_CACHE)
  *
  * flush_icache_range(unsigned long start, unsigned long stop)
  */
-_GLOBAL(flush_icache_range)
+_GLOBAL(__flush_icache_range)
 BEGIN_FTR_SECTION
         blr                             /* for 601, do nothing */
 END_FTR_SECTION_IFCLR(CPU_FTR_SPLIT_ID_CACHE)
@@ -607,27 +607,6 @@ _GLOBAL(invalidate_dcache_range)
         sync                            /* wait for dcbi's to get to ram */
         blr
 
-#ifdef CONFIG_NOT_COHERENT_CACHE
-/*
- * 40x cores have 8K or 16K dcache and 32 byte line size.
- * 44x has a 32K dcache and 32 byte line size.
- * 8xx has 1, 2, 4, 8K variants.
- * For now, cover the worst case of the 44x.
- * Must be called with external interrupts disabled.
- */
-#define CACHE_NWAYS     64
-#define CACHE_NLINES    16
-
-_GLOBAL(flush_dcache_all)
-        li      r4, (2 * CACHE_NWAYS * CACHE_NLINES)
-        mtctr   r4
-        lis     r5, KERNELBASE@h
-1:      lwz     r3, 0(r5)               /* Load one word from every line */
-        addi    r5, r5, L1_CACHE_BYTES
-        bdnz    1b
-        blr
-#endif /* CONFIG_NOT_COHERENT_CACHE */
-
 /*
  * Flush a particular page from the data cache to RAM.
  * Note: this is necessary because the instruction cache does *not*