powerpc: Move include files to arch/powerpc/include/asm

from include/asm-powerpc.  This is the result of a

mkdir arch/powerpc/include/asm
git mv include/asm-powerpc/* arch/powerpc/include/asm

Followed by a few documentation/comment fixups and a couple of places
where <asm-powepc/...> was being used explicitly.  Of the latter only
one was outside the arch code and it is a driver only built for powerpc.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>

1 files changed, 149 insertions, 0 deletions

diff --git a/arch/powerpc/include/asm/dcr-regs.h b/arch/powerpc/include/asm/dcr-regs.h
new file mode 100644
index 000000000000..29b0ecef980a
--- /dev/null
+++ b/arch/powerpc/include/asm/dcr-regs.h
@@ -0,0 +1,149 @@
+/*
+ * Common DCR / SDR / CPR register definitions used on various IBM/AMCC
+ * 4xx processors
+ *
+ *    Copyright 2007 Benjamin Herrenschmidt, IBM Corp
+ *                   <benh@kernel.crashing.org>
+ *
+ * Mostly lifted from asm-ppc/ibm4xx.h by
+ *
+ *    Copyright (c) 1999 Grant Erickson <grant@lcse.umn.edu>
+ *
+ */
+
+#ifndef __DCR_REGS_H__
+#define __DCR_REGS_H__
+
+/*
+ * Most DCRs used for controlling devices such as the MAL, DMA engine,
+ * etc... are obtained for the device tree.
+ *
+ * The definitions in this files are fixed DCRs and indirect DCRs that
+ * are commonly used outside of specific drivers or refer to core
+ * common registers that may occasionally have to be tweaked outside
+ * of the driver main register set
+ */
+
+/* CPRs (440GX and 440SP/440SPe) */
+#define DCRN_CPR0_CONFIG_ADDR   0xc
+#define DCRN_CPR0_CONFIG_DATA   0xd
+
+/* SDRs (440GX and 440SP/440SPe) */
+#define DCRN_SDR0_CONFIG_ADDR   0xe
+#define DCRN_SDR0_CONFIG_DATA   0xf
+
+#define SDR0_PFC0               0x4100
+#define SDR0_PFC1               0x4101
+#define SDR0_PFC1_EPS           0x1c00000
+#define SDR0_PFC1_EPS_SHIFT     22
+#define SDR0_PFC1_RMII          0x02000000
+#define SDR0_MFR                0x4300
+#define SDR0_MFR_TAH0           0x80000000      /* TAHOE0 Enable */
+#define SDR0_MFR_TAH1           0x40000000      /* TAHOE1 Enable */
+#define SDR0_MFR_PCM            0x10000000      /* PPC440GP irq compat mode */
+#define SDR0_MFR_ECS            0x08000000      /* EMAC int clk */
+#define SDR0_MFR_T0TXFL         0x00080000
+#define SDR0_MFR_T0TXFH         0x00040000
+#define SDR0_MFR_T1TXFL         0x00020000
+#define SDR0_MFR_T1TXFH         0x00010000
+#define SDR0_MFR_E0TXFL         0x00008000
+#define SDR0_MFR_E0TXFH         0x00004000
+#define SDR0_MFR_E0RXFL         0x00002000
+#define SDR0_MFR_E0RXFH         0x00001000
+#define SDR0_MFR_E1TXFL         0x00000800
+#define SDR0_MFR_E1TXFH         0x00000400
+#define SDR0_MFR_E1RXFL         0x00000200
+#define SDR0_MFR_E1RXFH         0x00000100
+#define SDR0_MFR_E2TXFL         0x00000080
+#define SDR0_MFR_E2TXFH         0x00000040
+#define SDR0_MFR_E2RXFL         0x00000020
+#define SDR0_MFR_E2RXFH         0x00000010
+#define SDR0_MFR_E3TXFL         0x00000008
+#define SDR0_MFR_E3TXFH         0x00000004
+#define SDR0_MFR_E3RXFL         0x00000002
+#define SDR0_MFR_E3RXFH         0x00000001
+#define SDR0_UART0              0x0120
+#define SDR0_UART1              0x0121
+#define SDR0_UART2              0x0122
+#define SDR0_UART3              0x0123
+#define SDR0_CUST0              0x4000
+
+/*
+ * All those DCR register addresses are offsets from the base address
+ * for the SRAM0 controller (e.g. 0x20 on 440GX). The base address is
+ * excluded here and configured in the device tree.
+ */
+#define DCRN_SRAM0_SB0CR        0x00
+#define DCRN_SRAM0_SB1CR        0x01
+#define DCRN_SRAM0_SB2CR        0x02
+#define DCRN_SRAM0_SB3CR        0x03
+#define  SRAM_SBCR_BU_MASK      0x00000180
+#define  SRAM_SBCR_BS_64KB      0x00000800
+#define  SRAM_SBCR_BU_RO        0x00000080
+#define  SRAM_SBCR_BU_RW        0x00000180
+#define DCRN_SRAM0_BEAR         0x04
+#define DCRN_SRAM0_BESR0        0x05
+#define DCRN_SRAM0_BESR1        0x06
+#define DCRN_SRAM0_PMEG         0x07
+#define DCRN_SRAM0_CID          0x08
+#define DCRN_SRAM0_REVID        0x09
+#define DCRN_SRAM0_DPC          0x0a
+#define  SRAM_DPC_ENABLE        0x80000000
+
+/*
+ * All those DCR register addresses are offsets from the base address
+ * for the SRAM0 controller (e.g. 0x30 on 440GX). The base address is
+ * excluded here and configured in the device tree.
+ */
+#define DCRN_L2C0_CFG           0x00
+#define  L2C_CFG_L2M            0x80000000
+#define  L2C_CFG_ICU            0x40000000
+#define  L2C_CFG_DCU            0x20000000
+#define  L2C_CFG_DCW_MASK       0x1e000000
+#define  L2C_CFG_TPC            0x01000000
+#define  L2C_CFG_CPC            0x00800000
+#define  L2C_CFG_FRAN           0x00200000
+#define  L2C_CFG_SS_MASK        0x00180000
+#define  L2C_CFG_SS_256         0x00000000
+#define  L2C_CFG_CPIM           0x00040000
+#define  L2C_CFG_TPIM           0x00020000
+#define  L2C_CFG_LIM            0x00010000
+#define  L2C_CFG_PMUX_MASK      0x00007000
+#define  L2C_CFG_PMUX_SNP       0x00000000
+#define  L2C_CFG_PMUX_IF        0x00001000
+#define  L2C_CFG_PMUX_DF        0x00002000
+#define  L2C_CFG_PMUX_DS        0x00003000
+#define  L2C_CFG_PMIM           0x00000800
+#define  L2C_CFG_TPEI           0x00000400
+#define  L2C_CFG_CPEI           0x00000200
+#define  L2C_CFG_NAM            0x00000100
+#define  L2C_CFG_SMCM           0x00000080
+#define  L2C_CFG_NBRM           0x00000040
+#define  L2C_CFG_RDBW           0x00000008      /* only 460EX/GT */
+#define DCRN_L2C0_CMD           0x01
+#define  L2C_CMD_CLR            0x80000000
+#define  L2C_CMD_DIAG           0x40000000
+#define  L2C_CMD_INV            0x20000000
+#define  L2C_CMD_CCP            0x10000000
+#define  L2C_CMD_CTE            0x08000000
+#define  L2C_CMD_STRC           0x04000000
+#define  L2C_CMD_STPC           0x02000000
+#define  L2C_CMD_RPMC           0x01000000
+#define  L2C_CMD_HCC            0x00800000
+#define DCRN_L2C0_ADDR          0x02
+#define DCRN_L2C0_DATA          0x03
+#define DCRN_L2C0_SR            0x04
+#define  L2C_SR_CC              0x80000000
+#define  L2C_SR_CPE             0x40000000
+#define  L2C_SR_TPE             0x20000000
+#define  L2C_SR_LRU             0x10000000
+#define  L2C_SR_PCS             0x08000000
+#define DCRN_L2C0_REVID         0x05
+#define DCRN_L2C0_SNP0          0x06
+#define DCRN_L2C0_SNP1          0x07
+#define  L2C_SNP_BA_MASK        0xffff0000
+#define  L2C_SNP_SSR_MASK       0x0000f000
+#define  L2C_SNP_SSR_32G        0x0000f000
+#define  L2C_SNP_ESR            0x00000800
+
+#endif /* __DCR_REGS_H__ */