powerpc/40x: AMCC PowerPC 405EZ Acadia DTS

Add the base DTS for the AMCC PowerPC 405EZ Acadia evalution board.
In addition to some of the normal PPC 40x peripherals, the Acadia
board has:
- 64 MiB PSRAM
- NOR and NAND flash
- Two USB 1.1 host ports
- Two CAN 2.0 ports
- ADC and DAC connectors
- LCD display

This adds the basic platform support to build from.

Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>

1 files changed, 224 insertions, 0 deletions

diff --git a/arch/powerpc/boot/dts/acadia.dts b/arch/powerpc/boot/dts/acadia.dts
new file mode 100644
index 000000000000..57291f61ffe7
--- /dev/null
+++ b/arch/powerpc/boot/dts/acadia.dts
@@ -0,0 +1,224 @@
+/*
+ * Device Tree Source for AMCC Acadia (405EZ)
+ *
+ * Copyright IBM Corp. 2008
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+/ {
+        #address-cells = <1>;
+        #size-cells = <1>;
+        model = "amcc,acadia";
+        compatible = "amcc,acadia";
+        dcr-parent = <&{/cpus/cpu@0}>;
+
+        aliases {
+                ethernet0 = &EMAC0;
+                serial0 = &UART0;
+                serial1 = &UART1;
+        };
+
+        cpus {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                cpu@0 {
+                        device_type = "cpu";
+                        model = "PowerPC,405EZ";
+                        reg = <0x0>;
+                        clock-frequency = <0>; /* Filled in by wrapper */
+                        timebase-frequency = <0>; /* Filled in by wrapper */
+                        i-cache-line-size = <32>;
+                        d-cache-line-size = <32>;
+                        i-cache-size = <16384>;
+                        d-cache-size = <16384>;
+                        dcr-controller;
+                        dcr-access-method = "native";
+                };
+        };
+
+        memory {
+                device_type = "memory";
+                reg = <0x0 0x0>; /* Filled in by wrapper */
+        };
+
+        UIC0: interrupt-controller {
+                compatible = "ibm,uic-405ez", "ibm,uic";
+                interrupt-controller;
+                dcr-reg = <0x0c0 0x009>;
+                cell-index = <0>;
+                #address-cells = <0>;
+                #size-cells = <0>;
+                #interrupt-cells = <2>;
+        };
+
+        plb {
+                compatible = "ibm,plb-405ez", "ibm,plb3";
+                #address-cells = <1>;
+                #size-cells = <1>;
+                ranges;
+                clock-frequency = <0>; /* Filled in by wrapper */
+
+                MAL0: mcmal {
+                        compatible = "ibm,mcmal-405ez", "ibm,mcmal";
+                        dcr-reg = <0x380 0x62>;
+                        num-tx-chans = <1>;
+                        num-rx-chans = <1>;
+                        interrupt-parent = <&UIC0>;
+                        /* 405EZ has only 3 interrupts to the UIC, as
+                         * SERR, TXDE, and RXDE are or'd together into
+                         * one UIC bit
+                         */
+                        interrupts = <
+                                0x13 0x4 /* TXEOB */
+                                0x15 0x4 /* RXEOB */
+                                0x12 0x4 /* SERR, TXDE, RXDE */>;
+                };
+
+                POB0: opb {
+                        compatible = "ibm,opb-405ez", "ibm,opb";
+                        #address-cells = <1>;
+                        #size-cells = <1>;
+                        ranges;
+                        dcr-reg = <0x0a 0x05>;
+                        clock-frequency = <0>; /* Filled in by wrapper */
+
+                        UART0: serial@ef600300 {
+                                device_type = "serial";
+                                compatible = "ns16550";
+                                reg = <0xef600300 0x8>;
+                                virtual-reg = <0xef600300>;
+                                clock-frequency = <0>; /* Filled in by wrapper */
+                                current-speed = <115200>;
+                                interrupt-parent = <&UIC0>;
+                                interrupts = <0x5 0x4>;
+                        };
+
+                        UART1: serial@ef600400 {
+                                device_type = "serial";
+                                compatible = "ns16550";
+                                reg = <0xef600400 0x8>;
+                                clock-frequency = <0>; /* Filled in by wrapper */
+                                current-speed = <115200>;
+                                interrupt-parent = <&UIC0>;
+                                interrupts = <0x6 0x4>;
+                        };
+
+                        IIC: i2c@ef600500 {
+                                compatible = "ibm,iic-405ez", "ibm,iic";
+                                reg = <0xef600500 0x11>;
+                                interrupt-parent = <&UIC0>;
+                                interrupts = <0xa 0x4>;
+                        };
+
+                        GPIO0: gpio@ef600700 {
+                                compatible = "ibm,gpio-405ez";
+                                reg = <0xef600700 0x20>;
+                        };
+
+                        GPIO1: gpio@ef600800 {
+                                compatible = "ibm,gpio-405ez";
+                                reg = <0xef600800 0x20>;
+                        };
+
+                        EMAC0: ethernet@ef600900 {
+                                device_type = "network";
+                                compatible = "ibm,emac-405ez", "ibm,emac";
+                                interrupt-parent = <&UIC0>;
+                                interrupts = <
+                                        0x10 0x4 /* Ethernet */
+                                        0x11 0x4 /* Ethernet Wake up */>;
+                                local-mac-address = [000000000000]; /* Filled in by wrapper */
+                                reg = <0xef600900 0x70>;
+                                mal-device = <&MAL0>;
+                                mal-tx-channel = <0>;
+                                mal-rx-channel = <0>;
+                                cell-index = <0>;
+                                max-frame-size = <1500>;
+                                rx-fifo-size = <4096>;
+                                tx-fifo-size = <2048>;
+                                phy-mode = "mii";
+                                phy-map = <0x0>;
+                        };
+
+                        CAN0: can@ef601000 {
+                                compatible = "amcc,can-405ez";
+                                reg = <0xef601000 0x620>;
+                                interrupt-parent = <&UIC0>;
+                                interrupts = <0x7 0x4>;
+                        };
+
+                        CAN1: can@ef601800 {
+                                compatible = "amcc,can-405ez";
+                                reg = <0xef601800 0x620>;
+                                interrupt-parent = <&UIC0>;
+                                interrupts = <0x8 0x4>;
+                        };
+
+                        cameleon@ef602000 {
+                                compatible = "amcc,cameleon-405ez";
+                                reg = <0xef602000 0x800>;
+                                interrupt-parent = <&UIC0>;
+                                interrupts = <0xb 0x4 0xc 0x4>;
+                        };
+
+                        ieee1588@ef602800 {
+                                compatible = "amcc,ieee1588-405ez";
+                                reg = <0xef602800 0x60>;
+                                interrupt-parent = <&UIC0>;
+                                interrupts = <0x4 0x4>;
+                                /* This thing is a bit weird.  It has it's own UIC
+                                 * that it uses to generate snapshot triggers.  We
+                                 * don't really support this device yet, and it needs
+                                 * work to figure this out.
+                                 */
+                                dcr-reg = <0xe0 0x9>;
+                        };
+
+                        usb@ef603000 {
+                                compatible = "ohci-be";
+                                reg = <0xef603000 0x80>;
+                                interrupts-parent = <&UIC0>;
+                                interrupts = <0xd 0x4 0xe 0x4>;
+                        };
+
+                        dac@ef603300 {
+                                compatible = "amcc,dac-405ez";
+                                reg = <0xef603300 0x40>;
+                                interrupt-parent = <&UIC0>;
+                                interrupts = <0x18 0x4>;
+                        };
+
+                        adc@ef603400 {
+                                compatible = "amcc,adc-405ez";
+                                reg = <0xef603400 0x40>;
+                                interrupt-parent = <&UIC0>;
+                                interrupts = <0x17 0x4>;
+                        };
+
+                        spi@ef603500 {
+                                compatible = "amcc,spi-405ez";
+                                reg = <0xef603500 0x100>;
+                                interrupt-parent = <&UIC0>;
+                                interrupts = <0x9 0x4>;
+                        };
+                };
+
+                EBC0: ebc {
+                        compatible = "ibm,ebc-405ez", "ibm,ebc";
+                        dcr-reg = <0x12 0x2>;
+                        #address-cells = <2>;
+                        #size-cells = <1>;
+                        clock-frequency = <0>; /* Filled in by wrapper */
+                };
+        };
+
+        chosen {
+                linux,stdout-path = "/plb/opb/serial@ef600300";
+        };
+};