powerpc/85xx: Add eSDHC support for MPC8536DS boards

This patch simply adds sdhci node to the device tree.

We specify clock-frequency manually, so that eSDHC will work without
upgrading U-Boot. Though, that'll only work for default setup (1500
MHz) on new board revisions. For non-default setups, it's recommended
to upgrade U-Boot, since it will fixup clock-frequency automatically.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

2 files changed, 16 insertions, 0 deletions

diff --git a/arch/powerpc/boot/dts/mpc8536ds.dts b/arch/powerpc/boot/dts/mpc8536ds.dts
index 22caf69e6efd..815cebb2e3e5 100644
--- a/arch/powerpc/boot/dts/mpc8536ds.dts
+++ b/arch/powerpc/boot/dts/mpc8536ds.dts
@@ -250,6 +250,14 @@
                         phy_type = "ulpi";
                 };
 
+                sdhci@2e000 {
+                        compatible = "fsl,mpc8536-esdhc", "fsl,esdhc";
+                        reg = <0x2e000 0x1000>;
+                        interrupts = <72 0x2>;
+                        interrupt-parent = <&mpic>;
+                        clock-frequency = <250000000>;
+                };
+
                 serial0: serial@4500 {
                         cell-index = <0>;
                         device_type = "serial";
diff --git a/arch/powerpc/boot/dts/mpc8536ds_36b.dts b/arch/powerpc/boot/dts/mpc8536ds_36b.dts
index 113ed8b7c898..d95b26021e62 100644
--- a/arch/powerpc/boot/dts/mpc8536ds_36b.dts
+++ b/arch/powerpc/boot/dts/mpc8536ds_36b.dts
@@ -250,6 +250,14 @@
                         phy_type = "ulpi";
                 };
 
+                sdhci@2e000 {
+                        compatible = "fsl,mpc8536-esdhc", "fsl,esdhc";
+                        reg = <0x2e000 0x1000>;
+                        interrupts = <72 0x2>;
+                        interrupt-parent = <&mpic>;
+                        clock-frequency = <250000000>;
+                };
+
                 serial0: serial@4500 {
                         cell-index = <0>;
                         device_type = "serial";