[POWERPC] 85xx: mpc8568mds - update dts to be able to use UCCs

1. UCC1's RX_DV pin is 16, not 15;
2. UCC1's phy is at 0x7, not 0x1. Schematics says 0x7, and recent
   u-boot also using 0x7.
3. Use gianfar's (eTSEC) mdio bus. This is hardware default setup.
4. tx-clock should be CLK16 (GE125, PB31);
5. phy-connection-type is RGMII-ID;

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

1 files changed, 11 insertions, 11 deletions

diff --git a/arch/powerpc/boot/dts/mpc8568mds.dts b/arch/powerpc/boot/dts/mpc8568mds.dts
index b064a2ff2306..54394372b12a 100644
--- a/arch/powerpc/boot/dts/mpc8568mds.dts
+++ b/arch/powerpc/boot/dts/mpc8568mds.dts
@@ -104,10 +104,10 @@
                         device_type = "mdio";
                         compatible = "gianfar";
                         reg = <24520 20>;
-                        phy0: ethernet-phy@0 {
+                        phy0: ethernet-phy@7 {
                                 interrupt-parent = <&mpic>;
                                 interrupts = <1 1>;
-                                reg = <0>;
+                                reg = <7>;
                                 device_type = "ethernet-phy";
                         };
                         phy1: ethernet-phy@1 {
@@ -242,7 +242,7 @@
                                         4  1a  2  0  2  0       /* RxD7 */
                                         4  0b  1  0  2  0       /* TX_EN */
                                         4  18  1  0  2  0       /* TX_ER */
-                                        4  0f  2  0  2  0       /* RX_DV */
+                                        4  10  2  0  2  0       /* RX_DV */
                                         4  1e  2  0  2  0       /* RX_ER */
                                         4  11  2  0  2  0       /* RX_CLK */
                                         4  13  1  0  2  0       /* GTX_CLK */
@@ -334,10 +334,10 @@
                         mac-address = [ 00 00 00 00 00 00 ];
                         local-mac-address = [ 00 00 00 00 00 00 ];
                         rx-clock = <0>;
-                        tx-clock = <19>;
-                        phy-handle = <&qe_phy0>;
-                        phy-connection-type = "gmii";
+                        tx-clock = <20>;
                         pio-handle = <&pio1>;
+                        phy-handle = <&phy0>;
+                        phy-connection-type = "rgmii-id";
                 };
 
                 ucc@3000 {
@@ -356,10 +356,10 @@
                         mac-address = [ 00 00 00 00 00 00 ];
                         local-mac-address = [ 00 00 00 00 00 00 ];
                         rx-clock = <0>;
-                        tx-clock = <14>;
-                        phy-handle = <&qe_phy1>;
-                        phy-connection-type = "gmii";
+                        tx-clock = <20>;
                         pio-handle = <&pio2>;
+                        phy-handle = <&phy1>;
+                        phy-connection-type = "rgmii-id";
                 };
 
                 mdio@2120 {
@@ -371,10 +371,10 @@
 
                         /* These are the same PHYs as on
                          * gianfar's MDIO bus */
-                        qe_phy0: ethernet-phy@00 {
+                        qe_phy0: ethernet-phy@07 {
                                 interrupt-parent = <&mpic>;
                                 interrupts = <1 1>;
-                                reg = <0>;
+                                reg = <7>;
                                 device_type = "ethernet-phy";
                         };
                         qe_phy1: ethernet-phy@01 {