powerpc/4xx: Sequoia: Enable NAND support

Now that the 4xx NAND driver is available again in arch/powerpc, let's
enable it on Sequoia. This patch also disables the early debug messages
(CONFIG_PPC_EARLY_DEBUG) in the Sequoia defconfig.

Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>

1 files changed, 22 insertions, 0 deletions

diff --git a/arch/powerpc/boot/dts/sequoia.dts b/arch/powerpc/boot/dts/sequoia.dts
index 43cc68bd3192..739dd0da2416 100644
--- a/arch/powerpc/boot/dts/sequoia.dts
+++ b/arch/powerpc/boot/dts/sequoia.dts
@@ -199,6 +199,28 @@
                                         };
                                 };
 
+                                ndfc@3,0 {
+                                        compatible = "ibm,ndfc";
+                                        reg = <0x00000003 0x00000000 0x00002000>;
+                                        ccr = <0x00001000>;
+                                        bank-settings = <0x80002222>;
+                                        #address-cells = <1>;
+                                        #size-cells = <1>;
+
+                                        nand {
+                                                #address-cells = <1>;
+                                                #size-cells = <1>;
+
+                                                partition@0 {
+                                                        label = "u-boot";
+                                                        reg = <0x00000000 0x00084000>;
+                                                };
+                                                partition@84000 {
+                                                        label = "user";
+                                                        reg = <0x00000000 0x01f7c000>;
+                                                };
+                                        };
+                                };
                         };
 
                         UART0: serial@ef600300 {