Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc

* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (408 commits)
  [POWERPC] Add memchr() to the bootwrapper
  [POWERPC] Implement logging of unhandled signals
  [POWERPC] Add legacy serial support for OPB with flattened device tree
  [POWERPC] Use 1TB segments
  [POWERPC] XilinxFB: Allow fixed framebuffer base address
  [POWERPC] XilinxFB: Add support for custom screen resolution
  [POWERPC] XilinxFB: Use pdata to pass around framebuffer parameters
  [POWERPC] PCI: Add 64-bit physical address support to setup_indirect_pci
  [POWERPC] 4xx: Kilauea defconfig file
  [POWERPC] 4xx: Kilauea DTS
  [POWERPC] 4xx: Add AMCC Kilauea eval board support to platforms/40x
  [POWERPC] 4xx: Add AMCC 405EX support to cputable.c
  [POWERPC] Adjust TASK_SIZE on ppc32 systems to 3GB that are capable
  [POWERPC] Use PAGE_OFFSET to tell if an address is user/kernel in SW TLB handlers
  [POWERPC] 85xx: Enable FP emulation in MPC8560 ADS defconfig
  [POWERPC] 85xx: Killed <asm/mpc85xx.h>
  [POWERPC] 85xx: Add cpm nodes for 8541/8555 CDS
  [POWERPC] 85xx: Convert mpc8560ads to the new CPM binding.
  [POWERPC] mpc8272ads: Remove muram from the CPM reg property.
  [POWERPC] Make clockevents work on PPC601 processors
  ...

Fixed up conflict in Documentation/powerpc/booting-without-of.txt manually.

1 files changed, 261 insertions, 0 deletions

diff --git a/arch/powerpc/boot/cuboot-pq2.c b/arch/powerpc/boot/cuboot-pq2.c
new file mode 100644
index 000000000000..61574f3272dd
--- /dev/null
+++ b/arch/powerpc/boot/cuboot-pq2.c
@@ -0,0 +1,261 @@
+/*
+ * Old U-boot compatibility for PowerQUICC II
+ * (a.k.a. 82xx with CPM, not the 8240 family of chips)
+ *
+ * Author: Scott Wood <scottwood@freescale.com>
+ *
+ * Copyright (c) 2007 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include "ops.h"
+#include "stdio.h"
+#include "cuboot.h"
+#include "io.h"
+#include "fsl-soc.h"
+
+#define TARGET_CPM2
+#define TARGET_HAS_ETH1
+#include "ppcboot.h"
+
+static bd_t bd;
+
+struct cs_range {
+        u32 csnum;
+        u32 base; /* must be zero */
+        u32 addr;
+        u32 size;
+};
+
+struct pci_range {
+        u32 flags;
+        u32 pci_addr[2];
+        u32 phys_addr;
+        u32 size[2];
+};
+
+struct cs_range cs_ranges_buf[MAX_PROP_LEN / sizeof(struct cs_range)];
+struct pci_range pci_ranges_buf[MAX_PROP_LEN / sizeof(struct pci_range)];
+
+/* Different versions of u-boot put the BCSR in different places, and
+ * some don't set up the PCI PIC at all, so we assume the device tree is
+ * sane and update the BRx registers appropriately.
+ *
+ * For any node defined as compatible with fsl,pq2-localbus,
+ * #address/#size must be 2/1 for the localbus, and 1/1 for the parent bus.
+ * Ranges must be for whole chip selects.
+ */
+static void update_cs_ranges(void)
+{
+        void *bus_node, *parent_node;
+        u32 *ctrl_addr;
+        unsigned long ctrl_size;
+        u32 naddr, nsize;
+        int len;
+        int i;
+
+        bus_node = finddevice("/localbus");
+        if (!bus_node || !dt_is_compatible(bus_node, "fsl,pq2-localbus"))
+                return;
+
+        dt_get_reg_format(bus_node, &naddr, &nsize);
+        if (naddr != 2 || nsize != 1)
+                goto err;
+
+        parent_node = get_parent(bus_node);
+        if (!parent_node)
+                goto err;
+
+        dt_get_reg_format(parent_node, &naddr, &nsize);
+        if (naddr != 1 || nsize != 1)
+                goto err;
+
+        if (!dt_xlate_reg(bus_node, 0, (unsigned long *)&ctrl_addr,
+                          &ctrl_size))
+                goto err;
+
+        len = getprop(bus_node, "ranges", cs_ranges_buf, sizeof(cs_ranges_buf));
+
+        for (i = 0; i < len / sizeof(struct cs_range); i++) {
+                u32 base, option;
+                int cs = cs_ranges_buf[i].csnum;
+                if (cs >= ctrl_size / 8)
+                        goto err;
+
+                if (cs_ranges_buf[i].base != 0)
+                        goto err;
+
+                base = in_be32(&ctrl_addr[cs * 2]);
+
+                /* If CS is already valid, use the existing flags.
+                 * Otherwise, guess a sane default.
+                 */
+                if (base & 1) {
+                        base &= 0x7fff;
+                        option = in_be32(&ctrl_addr[cs * 2 + 1]) & 0x7fff;
+                } else {
+                        base = 0x1801;
+                        option = 0x10;
+                }
+
+                out_be32(&ctrl_addr[cs * 2], 0);
+                out_be32(&ctrl_addr[cs * 2 + 1],
+                         option | ~(cs_ranges_buf[i].size - 1));
+                out_be32(&ctrl_addr[cs * 2], base | cs_ranges_buf[i].addr);
+        }
+
+        return;
+
+err:
+        printf("Bad /localbus node\r\n");
+}
+
+/* Older u-boots don't set PCI up properly.  Update the hardware to match
+ * the device tree.  The prefetch mem region and non-prefetch mem region
+ * must be contiguous in the host bus.  As required by the PCI binding,
+ * PCI #addr/#size must be 3/2.  The parent bus must be 1/1.  Only
+ * 32-bit PCI is supported.  All three region types (prefetchable mem,
+ * non-prefetchable mem, and I/O) must be present.
+ */
+static void fixup_pci(void)
+{
+        struct pci_range *mem = NULL, *mmio = NULL,
+                         *io = NULL, *mem_base = NULL;
+        u32 *pci_regs[3];
+        u8 *soc_regs;
+        int i, len;
+        void *node, *parent_node;
+        u32 naddr, nsize, mem_log2;
+
+        node = finddevice("/pci");
+        if (!node || !dt_is_compatible(node, "fsl,pq2-pci"))
+                return;
+
+        for (i = 0; i < 3; i++)
+                if (!dt_xlate_reg(node, i,
+                                  (unsigned long *)&pci_regs[i], NULL))
+                        goto err;
+
+        soc_regs = (u8 *)fsl_get_immr();
+        if (!soc_regs)
+                goto err;
+
+        dt_get_reg_format(node, &naddr, &nsize);
+        if (naddr != 3 || nsize != 2)
+                goto err;
+
+        parent_node = get_parent(node);
+        if (!parent_node)
+                goto err;
+
+        dt_get_reg_format(parent_node, &naddr, &nsize);
+        if (naddr != 1 || nsize != 1)
+                goto err;
+
+        len = getprop(node, "ranges", pci_ranges_buf,
+                      sizeof(pci_ranges_buf));
+
+        for (i = 0; i < len / sizeof(struct pci_range); i++) {
+                u32 flags = pci_ranges_buf[i].flags & 0x43000000;
+
+                if (flags == 0x42000000)
+                        mem = &pci_ranges_buf[i];
+                else if (flags == 0x02000000)
+                        mmio = &pci_ranges_buf[i];
+                else if (flags == 0x01000000)
+                        io = &pci_ranges_buf[i];
+        }
+
+        if (!mem || !mmio || !io)
+                goto err;
+
+        if (mem->phys_addr + mem->size[1] == mmio->phys_addr)
+                mem_base = mem;
+        else if (mmio->phys_addr + mmio->size[1] == mem->phys_addr)
+                mem_base = mmio;
+        else
+                goto err;
+
+        out_be32(&pci_regs[1][0], mem_base->phys_addr | 1);
+        out_be32(&pci_regs[2][0], ~(mem->size[1] + mmio->size[1] - 1));
+
+        out_be32(&pci_regs[1][1], io->phys_addr | 1);
+        out_be32(&pci_regs[2][1], ~(io->size[1] - 1));
+
+        out_le32(&pci_regs[0][0], mem->pci_addr[1] >> 12);
+        out_le32(&pci_regs[0][2], mem->phys_addr >> 12);
+        out_le32(&pci_regs[0][4], (~(mem->size[1] - 1) >> 12) | 0xa0000000);
+
+        out_le32(&pci_regs[0][6], mmio->pci_addr[1] >> 12);
+        out_le32(&pci_regs[0][8], mmio->phys_addr >> 12);
+        out_le32(&pci_regs[0][10], (~(mmio->size[1] - 1) >> 12) | 0x80000000);
+
+        out_le32(&pci_regs[0][12], io->pci_addr[1] >> 12);
+        out_le32(&pci_regs[0][14], io->phys_addr >> 12);
+        out_le32(&pci_regs[0][16], (~(io->size[1] - 1) >> 12) | 0xc0000000);
+
+        /* Inbound translation */
+        out_le32(&pci_regs[0][58], 0);
+        out_le32(&pci_regs[0][60], 0);
+
+        mem_log2 = 1 << (__ilog2_u32(bd.bi_memsize - 1) + 1);
+        out_le32(&pci_regs[0][62], 0xa0000000 | ~((1 << (mem_log2 - 12)) - 1));
+
+        /* If PCI is disabled, drive RST high to enable. */
+        if (!(in_le32(&pci_regs[0][32]) & 1)) {
+                 /* Tpvrh (Power valid to RST# high) 100 ms */
+                udelay(100000);
+
+                out_le32(&pci_regs[0][32], 1);
+
+                /* Trhfa (RST# high to first cfg access) 2^25 clocks */
+                udelay(1020000);
+        }
+
+        /* Enable bus master and memory access */
+        out_le32(&pci_regs[0][64], 0x80000004);
+        out_le32(&pci_regs[0][65], in_le32(&pci_regs[0][65]) | 6);
+
+        /* Park the bus on PCI, and elevate PCI's arbitration priority,
+         * as required by section 9.6 of the user's manual.
+         */
+        out_8(&soc_regs[0x10028], 3);
+        out_be32((u32 *)&soc_regs[0x1002c], 0x01236745);
+
+        return;
+
+err:
+        printf("Bad PCI node\r\n");
+}
+
+static void pq2_platform_fixups(void)
+{
+        void *node;
+
+        dt_fixup_memory(bd.bi_memstart, bd.bi_memsize);
+        dt_fixup_mac_addresses(bd.bi_enetaddr, bd.bi_enet1addr);
+        dt_fixup_cpu_clocks(bd.bi_intfreq, bd.bi_busfreq / 4, bd.bi_busfreq);
+
+        node = finddevice("/soc/cpm");
+        if (node)
+                setprop(node, "clock-frequency", &bd.bi_cpmfreq, 4);
+
+        node = finddevice("/soc/cpm/brg");
+        if (node)
+                setprop(node, "clock-frequency",  &bd.bi_brgfreq, 4);
+
+        update_cs_ranges();
+        fixup_pci();
+}
+
+void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
+                   unsigned long r6, unsigned long r7)
+{
+        CUBOOT_INIT();
+        ft_init(_dtb_start, _dtb_end - _dtb_start, 32);
+        serial_console_init();
+        platform_ops.fixups = pq2_platform_fixups;
+}