Separate out the proc- and unit-specific header directories from the general

MN10300 arch headers and place them instead in the same directories as contain
the .c files for the processor and unit implementations.

This permits the symlinks include/asm/proc and include/asm/unit to be
dispensed with.  This does, however, require that #include <asm/proc/xxx.h> be
converted to #include <proc/xxx.h> and similarly for asm/unit -> unit.

Signed-off-by: David Howells <dhowells@redhat.com>

4 files changed, 351 insertions, 0 deletions

diff --git a/arch/mn10300/unit-asb2305/include/unit/clock.h b/arch/mn10300/unit-asb2305/include/unit/clock.h
new file mode 100644
index 000000000000..7d514841ffda
--- /dev/null
+++ b/arch/mn10300/unit-asb2305/include/unit/clock.h
@@ -0,0 +1,45 @@
+/* ASB2305-specific clocks
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_UNIT_CLOCK_H
+#define _ASM_UNIT_CLOCK_H
+
+#ifndef __ASSEMBLY__
+
+#ifdef CONFIG_MN10300_RTC
+
+extern unsigned long mn10300_ioclk;     /* IOCLK (crystal speed) in HZ */
+extern unsigned long mn10300_iobclk;
+extern unsigned long mn10300_tsc_per_HZ;
+
+#define MN10300_IOCLK           ((unsigned long)mn10300_ioclk)
+/* If this processors has a another clock, uncomment the below. */
+/* #define MN10300_IOBCLK       ((unsigned long)mn10300_iobclk) */
+
+#else /* !CONFIG_MN10300_RTC */
+
+#define MN10300_IOCLK           33333333UL
+/* #define MN10300_IOBCLK       66666666UL */
+
+#endif /* !CONFIG_MN10300_RTC */
+
+#define MN10300_JCCLK           MN10300_IOCLK
+#define MN10300_TSCCLK          MN10300_IOCLK
+
+#ifdef CONFIG_MN10300_RTC
+#define MN10300_TSC_PER_HZ      ((unsigned long)mn10300_tsc_per_HZ)
+#else /* !CONFIG_MN10300_RTC */
+#define MN10300_TSC_PER_HZ      (MN10300_TSCCLK/HZ)
+#endif /* !CONFIG_MN10300_RTC */
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_UNIT_CLOCK_H */
diff --git a/arch/mn10300/unit-asb2305/include/unit/leds.h b/arch/mn10300/unit-asb2305/include/unit/leds.h
new file mode 100644
index 000000000000..bc471f617fd1
--- /dev/null
+++ b/arch/mn10300/unit-asb2305/include/unit/leds.h
@@ -0,0 +1,51 @@
+/* ASB2305-specific LEDs
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_UNIT_LEDS_H
+#define _ASM_UNIT_LEDS_H
+
+#include <asm/pio-regs.h>
+#include <asm/cpu-regs.h>
+#include <asm/exceptions.h>
+
+#define ASB2305_7SEGLEDS        __SYSREG(0xA6F90000, u32)
+
+/* perform a hard reset by driving PIO06 low */
+#define mn10300_unit_hard_reset()               \
+do {                                            \
+        P0OUT &= 0xbf;                          \
+        P0MD = (P0MD & P0MD_6) | P0MD_6_OUT;    \
+} while (0)
+
+/*
+ * use the 7-segment LEDs to indicate states
+ */
+/* indicate double-fault by displaying "db-f" on the LEDs */
+#define mn10300_set_dbfleds                     \
+        mov     0x43077f1d,d0           ;       \
+        mov     d0,(ASB2305_7SEGLEDS)
+
+/* flip the 7-segment LEDs between "Gdb-" and "----" */
+#define mn10300_set_gdbleds(ONOFF)                              \
+do {                                                            \
+        ASB2305_7SEGLEDS = (ONOFF) ? 0x8543077f : 0x7f7f7f7f;   \
+} while (0)
+
+#ifndef __ASSEMBLY__
+extern void peripheral_leds_display_exception(enum exception_code);
+extern void peripheral_leds_led_chase(void);
+extern void peripheral_leds7x4_display_dec(unsigned int, unsigned int);
+extern void peripheral_leds7x4_display_hex(unsigned int, unsigned int);
+extern void peripheral_leds7x4_display_minssecs(unsigned int, unsigned int);
+extern void peripheral_leds7x4_display_rtc(void);
+#endif /* __ASSEMBLY__ */
+
+#endif /* _ASM_UNIT_LEDS_H */
diff --git a/arch/mn10300/unit-asb2305/include/unit/serial.h b/arch/mn10300/unit-asb2305/include/unit/serial.h
new file mode 100644
index 000000000000..3bfc90938787
--- /dev/null
+++ b/arch/mn10300/unit-asb2305/include/unit/serial.h
@@ -0,0 +1,120 @@
+/* ASB2305-specific 8250 serial ports
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_UNIT_SERIAL_H
+#define _ASM_UNIT_SERIAL_H
+
+#include <asm/cpu/cpu-regs.h>
+#include <proc/irq.h>
+#include <linux/serial_reg.h>
+
+#define SERIAL_PORT0_BASE_ADDRESS       0xA6FB0000
+#define ASB2305_DEBUG_MCR       __SYSREG(0xA6FB0000 + UART_MCR * 2, u8)
+
+#define SERIAL_IRQ      XIRQ0   /* Dual serial (PC16552)        (Hi) */
+
+/*
+ * dispose of the /dev/ttyS0 serial port
+ */
+#ifndef CONFIG_GDBSTUB_ON_TTYSx
+
+#define SERIAL_PORT_DFNS                                                \
+        {                                                               \
+        .baud_base              = BASE_BAUD,                            \
+        .irq                    = SERIAL_IRQ,                           \
+        .flags                  = STD_COM_FLAGS,                        \
+        .iomem_base             = (u8 *) SERIAL_PORT0_BASE_ADDRESS,     \
+        .iomem_reg_shift        = 2,                                    \
+        .io_type                = SERIAL_IO_MEM,                        \
+        },
+
+#ifndef __ASSEMBLY__
+
+static inline void __debug_to_serial(const char *p, int n)
+{
+}
+
+#endif /* !__ASSEMBLY__ */
+
+#else /* CONFIG_GDBSTUB_ON_TTYSx */
+
+#define SERIAL_PORT_DFNS /* stolen by gdb-stub */
+
+#if defined(CONFIG_GDBSTUB_ON_TTYS0)
+#define GDBPORT_SERIAL_RX       __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_RX  * 4, u8)
+#define GDBPORT_SERIAL_TX       __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_TX  * 4, u8)
+#define GDBPORT_SERIAL_DLL      __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_DLL * 4, u8)
+#define GDBPORT_SERIAL_DLM      __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_DLM * 4, u8)
+#define GDBPORT_SERIAL_IER      __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_IER * 4, u8)
+#define GDBPORT_SERIAL_IIR      __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_IIR * 4, u8)
+#define GDBPORT_SERIAL_FCR      __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_FCR * 4, u8)
+#define GDBPORT_SERIAL_LCR      __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_LCR * 4, u8)
+#define GDBPORT_SERIAL_MCR      __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MCR * 4, u8)
+#define GDBPORT_SERIAL_LSR      __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_LSR * 4, u8)
+#define GDBPORT_SERIAL_MSR      __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MSR * 4, u8)
+#define GDBPORT_SERIAL_SCR      __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_SCR * 4, u8)
+#define GDBPORT_SERIAL_IRQ      SERIAL_IRQ
+
+#elif defined(CONFIG_GDBSTUB_ON_TTYS1)
+#error The ASB2305 doesnt have a /dev/ttyS1
+#endif
+
+#ifndef __ASSEMBLY__
+
+#define TTYS0_TX        __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_TX  * 4, u8)
+#define TTYS0_MCR       __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MCR * 4, u8)
+#define TTYS0_LSR       __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_LSR * 4, u8)
+#define TTYS0_MSR       __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MSR * 4, u8)
+
+#define LSR_WAIT_FOR(STATE)                             \
+do {                                                    \
+        while (!(TTYS0_LSR & UART_LSR_##STATE)) {}      \
+} while (0)
+#define FLOWCTL_WAIT_FOR(LINE)                          \
+do {                                                    \
+        while (!(TTYS0_MSR & UART_MSR_##LINE)) {}       \
+} while (0)
+#define FLOWCTL_CLEAR(LINE)                     \
+do {                                            \
+        TTYS0_MCR &= ~UART_MCR_##LINE;          \
+} while (0)
+#define FLOWCTL_SET(LINE)                       \
+do {                                            \
+        TTYS0_MCR |= UART_MCR_##LINE;           \
+} while (0)
+#define FLOWCTL_QUERY(LINE)     ({ TTYS0_MSR & UART_MSR_##LINE; })
+
+static inline void __debug_to_serial(const char *p, int n)
+{
+        char ch;
+
+        FLOWCTL_SET(DTR);
+
+        for (; n > 0; n--) {
+                LSR_WAIT_FOR(THRE);
+                FLOWCTL_WAIT_FOR(CTS);
+
+                ch = *p++;
+                if (ch == 0x0a) {
+                        TTYS0_TX = 0x0d;
+                        LSR_WAIT_FOR(THRE);
+                        FLOWCTL_WAIT_FOR(CTS);
+                }
+                TTYS0_TX = ch;
+        }
+
+        FLOWCTL_CLEAR(DTR);
+}
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* CONFIG_GDBSTUB_ON_TTYSx */
+
+#endif /* _ASM_UNIT_SERIAL_H */
diff --git a/arch/mn10300/unit-asb2305/include/unit/timex.h b/arch/mn10300/unit-asb2305/include/unit/timex.h
new file mode 100644
index 000000000000..a71c49aa85eb
--- /dev/null
+++ b/arch/mn10300/unit-asb2305/include/unit/timex.h
@@ -0,0 +1,135 @@
+/* ASB2305 timer specifcations
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_UNIT_TIMEX_H
+#define _ASM_UNIT_TIMEX_H
+
+#ifndef __ASSEMBLY__
+#include <linux/irq.h>
+#endif /* __ASSEMBLY__ */
+
+#include <asm/cpu/timer-regs.h>
+#include <unit/clock.h>
+
+/*
+ * jiffies counter specifications
+ */
+
+#define TMJCBR_MAX              0xffff
+#define TMJCBC                  TM01BC
+
+#define TMJCMD                  TM01MD
+#define TMJCBR                  TM01BR
+#define TMJCIRQ                 TM1IRQ
+#define TMJCICR                 TM1ICR
+#define TMJCICR_LEVEL           GxICR_LEVEL_5
+
+#ifndef __ASSEMBLY__
+
+static inline void startup_jiffies_counter(void)
+{
+        unsigned rate;
+        u16 md, t16;
+
+        /* use as little prescaling as possible to avoid losing accuracy */
+        md = TM0MD_SRC_IOCLK;
+        rate = MN10300_JCCLK / HZ;
+
+        if (rate > TMJCBR_MAX) {
+                md = TM0MD_SRC_IOCLK_8;
+                rate = MN10300_JCCLK / 8 / HZ;
+
+                if (rate > TMJCBR_MAX) {
+                        md = TM0MD_SRC_IOCLK_32;
+                        rate = MN10300_JCCLK / 32 / HZ;
+
+                        if (rate > TMJCBR_MAX)
+                                BUG();
+                }
+        }
+
+        TMJCBR = rate - 1;
+        t16 = TMJCBR;
+
+        TMJCMD =
+                md |
+                TM1MD_SRC_TM0CASCADE << 8 |
+                TM0MD_INIT_COUNTER |
+                TM1MD_INIT_COUNTER << 8;
+
+        TMJCMD =
+                md |
+                TM1MD_SRC_TM0CASCADE << 8 |
+                TM0MD_COUNT_ENABLE |
+                TM1MD_COUNT_ENABLE << 8;
+
+        t16 = TMJCMD;
+
+        TMJCICR |= GxICR_ENABLE | GxICR_DETECT | GxICR_REQUEST;
+        t16 = TMJCICR;
+}
+
+static inline void shutdown_jiffies_counter(void)
+{
+}
+
+#endif /* !__ASSEMBLY__ */
+
+
+/*
+ * timestamp counter specifications
+ */
+
+#define TMTSCBR_MAX             0xffffffff
+#define TMTSCBC                 TM45BC
+
+#ifndef __ASSEMBLY__
+
+static inline void startup_timestamp_counter(void)
+{
+        /* set up timer 4 & 5 cascaded as a 32-bit counter to count real time
+         * - count down from 4Gig-1 to 0 and wrap at IOCLK rate
+         */
+        TM45BR = TMTSCBR_MAX;
+
+        TM4MD = TM4MD_SRC_IOCLK;
+        TM4MD |= TM4MD_INIT_COUNTER;
+        TM4MD &= ~TM4MD_INIT_COUNTER;
+        TM4ICR = 0;
+
+        TM5MD = TM5MD_SRC_TM4CASCADE;
+        TM5MD |= TM5MD_INIT_COUNTER;
+        TM5MD &= ~TM5MD_INIT_COUNTER;
+        TM5ICR = 0;
+
+        TM5MD |= TM5MD_COUNT_ENABLE;
+        TM4MD |= TM4MD_COUNT_ENABLE;
+}
+
+static inline void shutdown_timestamp_counter(void)
+{
+        TM4MD = 0;
+        TM5MD = 0;
+}
+
+/*
+ * we use a cascaded pair of 16-bit down-counting timers to count I/O
+ * clock cycles for the purposes of time keeping
+ */
+typedef unsigned long cycles_t;
+
+static inline cycles_t read_timestamp_counter(void)
+{
+        return (cycles_t) TMTSCBC;
+}
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_UNIT_TIMEX_H */