mn10300: add the MN10300/AM33 architecture to the kernel

Add architecture support for the MN10300/AM33 CPUs produced by MEI to the
kernel.

This patch also adds board support for the ASB2303 with the ASB2308 daughter
board, and the ASB2305.  The only processor supported is the MN103E010, which
is an AM33v2 core plus on-chip devices.

[akpm@linux-foundation.org: nuke cvs control strings]
Signed-off-by: Masakazu Urade <urade.masakazu@jp.panasonic.com>
Signed-off-by: Koichi Yasutake <yasutake.koichi@jp.panasonic.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

1 files changed, 289 insertions, 0 deletions

diff --git a/arch/mn10300/mm/cache-mn10300.S b/arch/mn10300/mm/cache-mn10300.S
new file mode 100644
index 000000000000..e839d0aedd69
--- /dev/null
+++ b/arch/mn10300/mm/cache-mn10300.S
@@ -0,0 +1,289 @@
+/* MN10300 CPU core caching routines
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/sys.h>
+#include <linux/linkage.h>
+#include <asm/smp.h>
+#include <asm/page.h>
+#include <asm/cache.h>
+
+#define mn10300_dcache_inv_range_intr_interval \
+        +((1 << MN10300_DCACHE_INV_RANGE_INTR_LOG2_INTERVAL) - 1)
+
+#if mn10300_dcache_inv_range_intr_interval > 0xff
+#error MN10300_DCACHE_INV_RANGE_INTR_LOG2_INTERVAL must be 8 or less
+#endif
+
+        .am33_2
+
+        .globl mn10300_icache_inv
+        .globl mn10300_dcache_inv
+        .globl mn10300_dcache_inv_range
+        .globl mn10300_dcache_inv_range2
+        .globl mn10300_dcache_inv_page
+
+###############################################################################
+#
+# void mn10300_icache_inv(void)
+# Invalidate the entire icache
+#
+###############################################################################
+        ALIGN
+mn10300_icache_inv:
+        mov     CHCTR,a0
+
+        movhu   (a0),d0
+        btst    CHCTR_ICEN,d0
+        beq     mn10300_icache_inv_end
+
+        mov     epsw,d1
+        and     ~EPSW_IE,epsw
+        nop
+        nop
+
+        # disable the icache
+        and     ~CHCTR_ICEN,d0
+        movhu   d0,(a0)
+
+        # and wait for it to calm down
+        setlb
+        movhu   (a0),d0
+        btst    CHCTR_ICBUSY,d0
+        lne
+
+        # invalidate
+        or      CHCTR_ICINV,d0
+        movhu   d0,(a0)
+
+        # wait for the cache to finish
+        mov     CHCTR,a0
+        setlb
+        movhu   (a0),d0
+        btst    CHCTR_ICBUSY,d0
+        lne
+
+        # and reenable it
+        and     ~CHCTR_ICINV,d0
+        or      CHCTR_ICEN,d0
+        movhu   d0,(a0)
+        movhu   (a0),d0
+
+        mov     d1,epsw
+
+mn10300_icache_inv_end:
+        ret     [],0
+
+###############################################################################
+#
+# void mn10300_dcache_inv(void)
+# Invalidate the entire dcache
+#
+###############################################################################
+        ALIGN
+mn10300_dcache_inv:
+        mov     CHCTR,a0
+
+        movhu   (a0),d0
+        btst    CHCTR_DCEN,d0
+        beq     mn10300_dcache_inv_end
+
+        mov     epsw,d1
+        and     ~EPSW_IE,epsw
+        nop
+        nop
+
+        # disable the dcache
+        and     ~CHCTR_DCEN,d0
+        movhu   d0,(a0)
+
+        # and wait for it to calm down
+        setlb
+        movhu   (a0),d0
+        btst    CHCTR_DCBUSY,d0
+        lne
+
+        # invalidate
+        or      CHCTR_DCINV,d0
+        movhu   d0,(a0)
+
+        # wait for the cache to finish
+        mov     CHCTR,a0
+        setlb
+        movhu   (a0),d0
+        btst    CHCTR_DCBUSY,d0
+        lne
+
+        # and reenable it
+        and     ~CHCTR_DCINV,d0
+        or      CHCTR_DCEN,d0
+        movhu   d0,(a0)
+        movhu   (a0),d0
+
+        mov     d1,epsw
+
+mn10300_dcache_inv_end:
+        ret     [],0
+
+###############################################################################
+#
+# void mn10300_dcache_inv_range(unsigned start, unsigned end)
+# void mn10300_dcache_inv_range2(unsigned start, unsigned size)
+# void mn10300_dcache_inv_page(unsigned start)
+# Invalidate a range of addresses on a page in the dcache
+#
+###############################################################################
+        ALIGN
+mn10300_dcache_inv_page:
+        mov     PAGE_SIZE,d1
+mn10300_dcache_inv_range2:
+        add     d0,d1
+mn10300_dcache_inv_range:
+        movm    [d2,d3,a2],(sp)
+        mov     CHCTR,a2
+
+        movhu   (a2),d2
+        btst    CHCTR_DCEN,d2
+        beq     mn10300_dcache_inv_range_end
+
+        and     L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d0      # round start
+                                                                # addr down
+        mov     d0,a1
+
+        add     L1_CACHE_BYTES,d1                       # round end addr up
+        and     L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d1
+
+        clr     d2                              # we're going to clear tag ram
+                                                # entries
+
+        # read the tags from the tag RAM, and if they indicate a valid dirty
+        # cache line then invalidate that line
+        mov     DCACHE_TAG(0,0),a0
+        mov     a1,d0
+        and     L1_CACHE_TAG_ENTRY,d0
+        add     d0,a0                           # starting dcache tag RAM
+                                                # access address
+
+        sub     a1,d1
+        lsr     L1_CACHE_SHIFT,d1               # total number of entries to
+                                                # examine
+
+        and     ~(L1_CACHE_DISPARITY-1),a1      # determine comparator base
+
+mn10300_dcache_inv_range_outer_loop:
+        # disable interrupts
+        mov     epsw,d3
+        and     ~EPSW_IE,epsw
+        nop                                     # note that reading CHCTR and
+                                                # AND'ing D0 occupy two delay
+                                                # slots after disabling
+                                                # interrupts
+
+        # disable the dcache
+        movhu   (a2),d0
+        and     ~CHCTR_DCEN,d0
+        movhu   d0,(a2)
+
+        # and wait for it to calm down
+        setlb
+        movhu   (a2),d0
+        btst    CHCTR_DCBUSY,d0
+        lne
+
+mn10300_dcache_inv_range_loop:
+
+        # process the way 0 slot
+        mov     (L1_CACHE_WAYDISP*0,a0),d0      # read the tag in the way 0 slot
+        btst    L1_CACHE_TAG_VALID,d0
+        beq     mn10300_dcache_inv_range_skip_0 # jump if this cacheline is not
+                                                # valid
+
+        xor     a1,d0
+        lsr     12,d0
+        bne     mn10300_dcache_inv_range_skip_0 # jump if not this cacheline
+
+        mov     d2,(a0)                         # kill the tag
+
+mn10300_dcache_inv_range_skip_0:
+
+        # process the way 1 slot
+        mov     (L1_CACHE_WAYDISP*1,a0),d0      # read the tag in the way 1 slot
+        btst    L1_CACHE_TAG_VALID,d0
+        beq     mn10300_dcache_inv_range_skip_1 # jump if this cacheline is not
+                                                # valid
+
+        xor     a1,d0
+        lsr     12,d0
+        bne     mn10300_dcache_inv_range_skip_1 # jump if not this cacheline
+
+        mov     d2,(a0)                         # kill the tag
+
+mn10300_dcache_inv_range_skip_1:
+
+        # process the way 2 slot
+        mov     (L1_CACHE_WAYDISP*2,a0),d0      # read the tag in the way 2 slot
+        btst    L1_CACHE_TAG_VALID,d0
+        beq     mn10300_dcache_inv_range_skip_2 # jump if this cacheline is not
+                                                # valid
+
+        xor     a1,d0
+        lsr     12,d0
+        bne     mn10300_dcache_inv_range_skip_2 # jump if not this cacheline
+
+        mov     d2,(a0)                         # kill the tag
+
+mn10300_dcache_inv_range_skip_2:
+
+        # process the way 3 slot
+        mov     (L1_CACHE_WAYDISP*3,a0),d0      # read the tag in the way 3 slot
+        btst    L1_CACHE_TAG_VALID,d0
+        beq     mn10300_dcache_inv_range_skip_3 # jump if this cacheline is not
+                                                # valid
+
+        xor     a1,d0
+        lsr     12,d0
+        bne     mn10300_dcache_inv_range_skip_3 # jump if not this cacheline
+
+        mov     d2,(a0)                         # kill the tag
+
+mn10300_dcache_inv_range_skip_3:
+
+        # approx every N steps we re-enable the cache and see if there are any
+        # interrupts to be processed
+        # we also break out if we've reached the end of the loop
+        # (the bottom nibble of the count is zero in both cases)
+        add     L1_CACHE_BYTES,a0
+        add     L1_CACHE_BYTES,a1
+        add     -1,d1
+        btst    mn10300_dcache_inv_range_intr_interval,d1
+        bne     mn10300_dcache_inv_range_loop
+
+        # wait for the cache to finish what it's doing
+        setlb
+        movhu   (a2),d0
+        btst    CHCTR_DCBUSY,d0
+        lne
+
+        # and reenable it
+        or      CHCTR_DCEN,d0
+        movhu   d0,(a2)
+        movhu   (a2),d0
+
+        # re-enable interrupts
+        # - we don't bother with delay NOPs as we'll have enough instructions
+        #   before we disable interrupts again to give the interrupts a chance
+        #   to happen
+        mov     d3,epsw
+
+        # go around again if the counter hasn't yet reached zero
+        add     0,d1
+        bne     mn10300_dcache_inv_range_outer_loop
+
+mn10300_dcache_inv_range_end:
+        ret     [d2,d3,a2],12