[MIPS] PB1100: Fix pile of warnings

  CC      arch/mips/au1000/pb1100/board_setup.o
arch/mips/au1000/pb1100/board_setup.c: In function ‘board_setup’:
arch/mips/au1000/pb1100/board_setup.c:104: warning: passing argument 1 of ‘readb’ makes pointer from integer without a cast
arch/mips/au1000/pb1100/board_setup.c:105: warning: passing argument 1 of ‘readb’ makes pointer from integer without a cast
arch/mips/au1000/pb1100/board_setup.c:105: warning: passing argument 2 of ‘writeb’ makes pointer from integer without a cast
arch/mips/au1000/pb1100/board_setup.c:109: warning: passing argument 1 of ‘readb’ makes pointer from integer without a cast
arch/mips/au1000/pb1100/board_setup.c:110: warning: passing argument 1 of ‘readb’ makes pointer from integer without a cast
arch/mips/au1000/pb1100/board_setup.c:110: warning: passing argument 2 of ‘writeb’ makes pointer from integer without a cast
arch/mips/au1000/pb1100/board_setup.c:51: warning: unused variable ‘sys_clksrc’
arch/mips/au1000/pb1100/board_setup.c:51: warning: unused variable ‘sys_freqctrl’
arch/mips/au1000/pb1100/board_setup.c:50: warning: unused variable ‘pin_func’
    
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

1 files changed, 48 insertions, 45 deletions

diff --git a/arch/mips/au1000/pb1100/board_setup.c b/arch/mips/au1000/pb1100/board_setup.c
index 2d1533f116c0..6bc1f8e1b608 100644
--- a/arch/mips/au1000/pb1100/board_setup.c
+++ b/arch/mips/au1000/pb1100/board_setup.c
@@ -47,8 +47,7 @@ void board_reset (void)
 
 void __init board_setup(void)
 {
-        u32 pin_func;
-        u32 sys_freqctrl, sys_clksrc;
+        volatile void __iomem * base = (volatile void __iomem *) 0xac000000UL;
 
         // set AUX clock to 12MHz * 8 = 96 MHz
         au_writel(8, SYS_AUXPLL);
@@ -56,58 +55,62 @@ void __init board_setup(void)
         udelay(100);
 
 #ifdef CONFIG_USB_OHCI
-        // configure pins GPIO[14:9] as GPIO
-        pin_func = au_readl(SYS_PINFUNC) & (u32)(~0x80);
-
-        /* zero and disable FREQ2 */
-        sys_freqctrl = au_readl(SYS_FREQCTRL0);
-        sys_freqctrl &= ~0xFFF00000;
-        au_writel(sys_freqctrl, SYS_FREQCTRL0);
-
-        /* zero and disable USBH/USBD/IrDA clock */
-        sys_clksrc = au_readl(SYS_CLKSRC);
-        sys_clksrc &= ~0x0000001F;
-        au_writel(sys_clksrc, SYS_CLKSRC);
-
-        sys_freqctrl = au_readl(SYS_FREQCTRL0);
-        sys_freqctrl &= ~0xFFF00000;
-
-        sys_clksrc = au_readl(SYS_CLKSRC);
-        sys_clksrc &= ~0x0000001F;
-
-        // FREQ2 = aux/2 = 48 MHz
-        sys_freqctrl |= ((0<<22) | (1<<21) | (1<<20));
-        au_writel(sys_freqctrl, SYS_FREQCTRL0);
-
-        /*
-         * Route 48MHz FREQ2 into USBH/USBD/IrDA
-         */
-        sys_clksrc |= ((4<<2) | (0<<1) | 0 );
-        au_writel(sys_clksrc, SYS_CLKSRC);
-
-        /* setup the static bus controller */
-        au_writel(0x00000002, MEM_STCFG3);  /* type = PCMCIA */
-        au_writel(0x280E3D07, MEM_STTIME3); /* 250ns cycle time */
-        au_writel(0x10000000, MEM_STADDR3); /* any PCMCIA select */
-
-        // get USB Functionality pin state (device vs host drive pins)
-        pin_func = au_readl(SYS_PINFUNC) & (u32)(~0x8000);
-        // 2nd USB port is USB host
-        pin_func |= 0x8000;
-        au_writel(pin_func, SYS_PINFUNC);
+        {
+                u32 pin_func, sys_freqctrl, sys_clksrc;
+
+                // configure pins GPIO[14:9] as GPIO
+                pin_func = au_readl(SYS_PINFUNC) & (u32)(~0x80);
+
+                /* zero and disable FREQ2 */
+                sys_freqctrl = au_readl(SYS_FREQCTRL0);
+                sys_freqctrl &= ~0xFFF00000;
+                au_writel(sys_freqctrl, SYS_FREQCTRL0);
+
+                /* zero and disable USBH/USBD/IrDA clock */
+                sys_clksrc = au_readl(SYS_CLKSRC);
+                sys_clksrc &= ~0x0000001F;
+                au_writel(sys_clksrc, SYS_CLKSRC);
+
+                sys_freqctrl = au_readl(SYS_FREQCTRL0);
+                sys_freqctrl &= ~0xFFF00000;
+
+                sys_clksrc = au_readl(SYS_CLKSRC);
+                sys_clksrc &= ~0x0000001F;
+
+                // FREQ2 = aux/2 = 48 MHz
+                sys_freqctrl |= ((0<<22) | (1<<21) | (1<<20));
+                au_writel(sys_freqctrl, SYS_FREQCTRL0);
+
+                /*
+                 * Route 48MHz FREQ2 into USBH/USBD/IrDA
+                 */
+                sys_clksrc |= ((4<<2) | (0<<1) | 0 );
+                au_writel(sys_clksrc, SYS_CLKSRC);
+
+                /* setup the static bus controller */
+                au_writel(0x00000002, MEM_STCFG3);  /* type = PCMCIA */
+                au_writel(0x280E3D07, MEM_STTIME3); /* 250ns cycle time */
+                au_writel(0x10000000, MEM_STADDR3); /* any PCMCIA select */
+
+                // get USB Functionality pin state (device vs host drive pins)
+                pin_func = au_readl(SYS_PINFUNC) & (u32)(~0x8000);
+                // 2nd USB port is USB host
+                pin_func |= 0x8000;
+                au_writel(pin_func, SYS_PINFUNC);
+        }
 #endif // defined (CONFIG_USB_OHCI)
 
         /* Enable sys bus clock divider when IDLE state or no bus activity. */
         au_writel(au_readl(SYS_POWERCTRL) | (0x3 << 5), SYS_POWERCTRL);
 
         // Enable the RTC if not already enabled
-        if (!(readb(0xac000028) & 0x20)) {
-                writeb(readb(0xac000028) | 0x20, 0xac000028);
+        if (!(readb(base + 0x28) & 0x20)) {
+                writeb(readb(base + 0x28) | 0x20, base + 0x28);
                 au_sync();
         }
         // Put the clock in BCD mode
-        if (readb(0xac00002C) & 0x4) { /* reg B */
-                writeb(readb(0xac00002c) & ~0x4, 0xac00002c);
+        if (readb(base + 0x2C) & 0x4) { /* reg B */
+                writeb(readb(base + 0x2c) & ~0x4, base + 0x2c);
                 au_sync();
         }
 }