MIPS: BCM63xx: Fix build failure in board_bcm963xx.c

Since 2083e8327aeeaf818b0e4522a9d2539835c60423, the SPROM is now registered
in the board_prom_init callback, but it references variables and functions
which are declared below.  Move the variables and functions above
board_prom_init.

Signed-off-by: Florian Fainelli <ffainelli@freebox.fr>
To: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/1077/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

1 files changed, 70 insertions, 70 deletions

diff --git a/arch/mips/bcm63xx/boards/board_bcm963xx.c b/arch/mips/bcm63xx/boards/board_bcm963xx.c
index 5addb9c6fb0b..8dba8cfb752f 100644
--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -619,6 +619,76 @@ static const struct board_info __initdata *bcm963xx_boards[] = {
 };
 
 /*
+ * Register a sane SPROMv2 to make the on-board
+ * bcm4318 WLAN work
+ */
+#ifdef CONFIG_SSB_PCIHOST
+static struct ssb_sprom bcm63xx_sprom = {
+        .revision               = 0x02,
+        .board_rev              = 0x17,
+        .country_code           = 0x0,
+        .ant_available_bg       = 0x3,
+        .pa0b0                  = 0x15ae,
+        .pa0b1                  = 0xfa85,
+        .pa0b2                  = 0xfe8d,
+        .pa1b0                  = 0xffff,
+        .pa1b1                  = 0xffff,
+        .pa1b2                  = 0xffff,
+        .gpio0                  = 0xff,
+        .gpio1                  = 0xff,
+        .gpio2                  = 0xff,
+        .gpio3                  = 0xff,
+        .maxpwr_bg              = 0x004c,
+        .itssi_bg               = 0x00,
+        .boardflags_lo          = 0x2848,
+        .boardflags_hi          = 0x0000,
+};
+#endif
+
+/*
+ * return board name for /proc/cpuinfo
+ */
+const char *board_get_name(void)
+{
+        return board.name;
+}
+
+/*
+ * register & return a new board mac address
+ */
+static int board_get_mac_address(u8 *mac)
+{
+        u8 *p;
+        int count;
+
+        if (mac_addr_used >= nvram.mac_addr_count) {
+                printk(KERN_ERR PFX "not enough mac address\n");
+                return -ENODEV;
+        }
+
+        memcpy(mac, nvram.mac_addr_base, ETH_ALEN);
+        p = mac + ETH_ALEN - 1;
+        count = mac_addr_used;
+
+        while (count--) {
+                do {
+                        (*p)++;
+                        if (*p != 0)
+                                break;
+                        p--;
+                } while (p != mac);
+        }
+
+        if (p == mac) {
+                printk(KERN_ERR PFX "unable to fetch mac address\n");
+                return -ENODEV;
+        }
+
+        mac_addr_used++;
+        return 0;
+}
+
+/*
  * early init callback, read nvram data from flash and checksum it
  */
 void __init board_prom_init(void)
@@ -744,49 +814,6 @@ void __init board_setup(void)
                 panic("unexpected CPU for bcm963xx board");
 }
 
-/*
- * return board name for /proc/cpuinfo
- */
-const char *board_get_name(void)
-{
-        return board.name;
-}
-
-/*
- * register & return a new board mac address
- */
-static int board_get_mac_address(u8 *mac)
-{
-        u8 *p;
-        int count;
-
-        if (mac_addr_used >= nvram.mac_addr_count) {
-                printk(KERN_ERR PFX "not enough mac address\n");
-                return -ENODEV;
-        }
-
-        memcpy(mac, nvram.mac_addr_base, ETH_ALEN);
-        p = mac + ETH_ALEN - 1;
-        count = mac_addr_used;
-
-        while (count--) {
-                do {
-                        (*p)++;
-                        if (*p != 0)
-                                break;
-                        p--;
-                } while (p != mac);
-        }
-
-        if (p == mac) {
-                printk(KERN_ERR PFX "unable to fetch mac address\n");
-                return -ENODEV;
-        }
-
-        mac_addr_used++;
-        return 0;
-}
-
 static struct mtd_partition mtd_partitions[] = {
         {
                 .name           = "cfe",
@@ -818,33 +845,6 @@ static struct platform_device mtd_dev = {
         },
 };
 
-/*
- * Register a sane SPROMv2 to make the on-board
- * bcm4318 WLAN work
- */
-#ifdef CONFIG_SSB_PCIHOST
-static struct ssb_sprom bcm63xx_sprom = {
-        .revision               = 0x02,
-        .board_rev              = 0x17,
-        .country_code           = 0x0,
-        .ant_available_bg       = 0x3,
-        .pa0b0                  = 0x15ae,
-        .pa0b1                  = 0xfa85,
-        .pa0b2                  = 0xfe8d,
-        .pa1b0                  = 0xffff,
-        .pa1b1                  = 0xffff,
-        .pa1b2                  = 0xffff,
-        .gpio0                  = 0xff,
-        .gpio1                  = 0xff,
-        .gpio2                  = 0xff,
-        .gpio3                  = 0xff,
-        .maxpwr_bg              = 0x004c,
-        .itssi_bg               = 0x00,
-        .boardflags_lo          = 0x2848,
-        .boardflags_hi          = 0x0000,
-};
-#endif
-
 static struct gpio_led_platform_data bcm63xx_led_data;
 
 static struct platform_device bcm63xx_gpio_leds = {