[MIPS] time: Replace plat_timer_setup with modern APIs.

plat_timer_setup is no longer getting called.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

3 files changed, 62 insertions, 67 deletions

diff --git a/arch/mips/kernel/cevt-r4k.c b/arch/mips/kernel/cevt-r4k.c
index a59f67ff301e..bab935a3d74b 100644
--- a/arch/mips/kernel/cevt-r4k.c
+++ b/arch/mips/kernel/cevt-r4k.c
@@ -224,7 +224,7 @@ void __cpuinit mips_clockevent_init(void)
         uint64_t mips_freq = mips_hpt_frequency;
         unsigned int cpu = smp_processor_id();
         struct clock_event_device *cd;
-        unsigned int irq = MIPS_CPU_IRQ_BASE + 7;
+        unsigned int irq;
 
         if (!cpu_has_counter || !mips_hpt_frequency)
                 return;
@@ -243,6 +243,15 @@ void __cpuinit mips_clockevent_init(void)
         if (!c0_compare_int_usable())
                 return;
 
+        /*
+         * With vectored interrupts things are getting platform specific.
+         * get_c0_compare_int is a hook to allow a platform to return the
+         * interrupt number of it's liking.
+         */
+        irq = MIPS_CPU_IRQ_BASE + cp0_compare_irq;
+        if (get_c0_compare_int)
+                irq = get_c0_compare_int();
+
         cd = &per_cpu(mips_clockevent_device, cpu);
 
         cd->name                = "MIPS";
@@ -267,13 +276,15 @@ void __cpuinit mips_clockevent_init(void)
 
         clockevents_register_device(cd);
 
-        if (!cp0_timer_irq_installed) {
+        if (!cp0_timer_irq_installed)
+                return;
+
+        cp0_timer_irq_installed = 1;
+
 #ifdef CONFIG_MIPS_MT_SMTC
 #define CPUCTR_IMASKBIT (0x100 << cp0_compare_irq)
-                setup_irq_smtc(irq, &c0_compare_irqaction, CPUCTR_IMASKBIT);
+        setup_irq_smtc(irq, &c0_compare_irqaction, CPUCTR_IMASKBIT);
 #else
-                setup_irq(irq, &c0_compare_irqaction);
-#endif /* CONFIG_MIPS_MT_SMTC */
-                cp0_timer_irq_installed = 1;
-        }
+        setup_irq(irq, &c0_compare_irqaction);
+#endif
 }
diff --git a/arch/mips/mips-boards/generic/time.c b/arch/mips/mips-boards/generic/time.c
index 9d6243a8c15a..f02ce6308e51 100644
--- a/arch/mips/mips-boards/generic/time.c
+++ b/arch/mips/mips-boards/generic/time.c
@@ -127,26 +127,6 @@ unsigned long read_persistent_clock(void)
         return mc146818_get_cmos_time();
 }
 
-void __init plat_time_init(void)
-{
-        unsigned int est_freq;
-
-        /* Set Data mode - binary. */
-        CMOS_WRITE(CMOS_READ(RTC_CONTROL) | RTC_DM_BINARY, RTC_CONTROL);
-
-        est_freq = estimate_cpu_frequency();
-
-        printk("CPU frequency %d.%02d MHz\n", est_freq/1000000,
-               (est_freq%1000000)*100/1000000);
-
-        cpu_khz = est_freq / 1000;
-
-        mips_scroll_message();
-#ifdef CONFIG_I8253             /* Only Malta has a PIT */
-        setup_pit_timer();
-#endif
-}
-
 void __init plat_perf_setup(void)
 {
         cp0_perfcount_irq = -1;
@@ -166,14 +146,13 @@ void __init plat_perf_setup(void)
         }
 }
 
-void __init plat_timer_setup(struct irqaction *irq)
+unsigned int __init get_c0_compare_int(void)
 {
 #ifdef MSC01E_INT_BASE
         if (cpu_has_veic) {
                 set_vi_handler(MSC01E_INT_CPUCTR, mips_timer_dispatch);
                 mips_cpu_timer_irq = MSC01E_INT_BASE + MSC01E_INT_CPUCTR;
-        }
-        else
+        } else
 #endif
         {
                 if (cpu_has_vint)
@@ -181,13 +160,26 @@ void __init plat_timer_setup(struct irqaction *irq)
                 mips_cpu_timer_irq = MIPS_CPU_IRQ_BASE + cp0_compare_irq;
         }
 
-#ifdef CONFIG_MIPS_MT_SMTC
-        setup_irq_smtc(mips_cpu_timer_irq, irq, 0x100 << cp0_compare_irq);
-#else
-        setup_irq(mips_cpu_timer_irq, irq);
-#endif /* CONFIG_MIPS_MT_SMTC */
-#ifdef CONFIG_SMP
-        set_irq_handler(mips_cpu_timer_irq, handle_percpu_irq);
+        return mips_cpu_timer_irq;
+}
+
+void __init plat_time_init(void)
+{
+        unsigned int est_freq;
+
+        /* Set Data mode - binary. */
+        CMOS_WRITE(CMOS_READ(RTC_CONTROL) | RTC_DM_BINARY, RTC_CONTROL);
+
+        est_freq = estimate_cpu_frequency();
+
+        printk("CPU frequency %d.%02d MHz\n", est_freq/1000000,
+               (est_freq%1000000)*100/1000000);
+
+        cpu_khz = est_freq / 1000;
+
+        mips_scroll_message();
+#ifdef CONFIG_I8253             /* Only Malta has a PIT */
+        setup_pit_timer();
 #endif
 
         plat_perf_setup();
diff --git a/arch/mips/mipssim/sim_time.c b/arch/mips/mipssim/sim_time.c
index e7fa0d1078a3..bfaafa38846f 100644
--- a/arch/mips/mipssim/sim_time.c
+++ b/arch/mips/mipssim/sim_time.c
@@ -75,25 +75,6 @@ static unsigned int __init estimate_cpu_frequency(void)
         return count;
 }
 
-void __init plat_time_init(void)
-{
-        unsigned int est_freq, flags;
-
-        local_irq_save(flags);
-
-        /* Set Data mode - binary. */
-        CMOS_WRITE(CMOS_READ(RTC_CONTROL) | RTC_DM_BINARY, RTC_CONTROL);
-
-        est_freq = estimate_cpu_frequency();
-
-        printk(KERN_INFO "CPU frequency %d.%02d MHz\n", est_freq / 1000000,
-               (est_freq % 1000000) * 100 / 1000000);
-
-        cpu_khz = est_freq / 1000;
-
-        local_irq_restore(flags);
-}
-
 static int mips_cpu_timer_irq;
 
 static void mips_timer_dispatch(void)
@@ -102,26 +83,37 @@ static void mips_timer_dispatch(void)
 }
 
 
-void __init plat_timer_setup(struct irqaction *irq)
+unsigned __init get_c0_compare_int(void)
 {
+#ifdef MSC01E_INT_BASE
         if (cpu_has_veic) {
                 set_vi_handler(MSC01E_INT_CPUCTR, mips_timer_dispatch);
                 mips_cpu_timer_irq = MSC01E_INT_BASE + MSC01E_INT_CPUCTR;
         } else {
+#endif
                 if (cpu_has_vint)
                         set_vi_handler(cp0_compare_irq, mips_timer_dispatch);
                 mips_cpu_timer_irq = MIPS_CPU_IRQ_BASE + cp0_compare_irq;
         }
 
-        /* we are using the cpu counter for timer interrupts */
-        setup_irq(mips_cpu_timer_irq, irq);
+        return mips_cpu_timer_irq;
+}
 
-#ifdef CONFIG_SMP
-        /* irq_desc(riptor) is a global resource, when the interrupt overlaps
-           on seperate cpu's the first one tries to handle the second interrupt.
-           The effect is that the int remains disabled on the second cpu.
-           Mark the interrupt with IRQ_PER_CPU to avoid any confusion */
-        irq_desc[mips_cpu_timer_irq].flags |= IRQ_PER_CPU;
-        set_irq_handler(mips_cpu_timer_irq, handle_percpu_irq);
-#endif
+void __init plat_time_init(void)
+{
+        unsigned int est_freq, flags;
+
+        local_irq_save(flags);
+
+        /* Set Data mode - binary. */
+        CMOS_WRITE(CMOS_READ(RTC_CONTROL) | RTC_DM_BINARY, RTC_CONTROL);
+
+        est_freq = estimate_cpu_frequency();
+
+        printk(KERN_INFO "CPU frequency %d.%02d MHz\n", est_freq / 1000000,
+               (est_freq % 1000000) * 100 / 1000000);
+
+        cpu_khz = est_freq / 1000;
+
+        local_irq_restore(flags);
 }