Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 457 insertions, 0 deletions

diff --git a/arch/mips/sgi-ip27/ip27-irq.c b/arch/mips/sgi-ip27/ip27-irq.c
new file mode 100644
index 000000000000..61817a18aed2
--- /dev/null
+++ b/arch/mips/sgi-ip27/ip27-irq.c
@@ -0,0 +1,457 @@
+/*
+ * ip27-irq.c: Highlevel interrupt handling for IP27 architecture.
+ *
+ * Copyright (C) 1999, 2000 Ralf Baechle (ralf@gnu.org)
+ * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
+ * Copyright (C) 1999 - 2001 Kanoj Sarcar
+ */
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/errno.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/irq.h>
+#include <linux/timex.h>
+#include <linux/slab.h>
+#include <linux/random.h>
+#include <linux/smp_lock.h>
+#include <linux/kernel_stat.h>
+#include <linux/delay.h>
+#include <linux/bitops.h>
+
+#include <asm/bootinfo.h>
+#include <asm/io.h>
+#include <asm/mipsregs.h>
+#include <asm/system.h>
+
+#include <asm/ptrace.h>
+#include <asm/processor.h>
+#include <asm/pci/bridge.h>
+#include <asm/sn/addrs.h>
+#include <asm/sn/agent.h>
+#include <asm/sn/arch.h>
+#include <asm/sn/hub.h>
+#include <asm/sn/intr.h>
+
+#undef DEBUG_IRQ
+#ifdef DEBUG_IRQ
+#define DBG(x...) printk(x)
+#else
+#define DBG(x...)
+#endif
+
+/*
+ * Linux has a controller-independent x86 interrupt architecture.
+ * every controller has a 'controller-template', that is used
+ * by the main code to do the right thing. Each driver-visible
+ * interrupt source is transparently wired to the apropriate
+ * controller. Thus drivers need not be aware of the
+ * interrupt-controller.
+ *
+ * Various interrupt controllers we handle: 8259 PIC, SMP IO-APIC,
+ * PIIX4's internal 8259 PIC and SGI's Visual Workstation Cobalt (IO-)APIC.
+ * (IO-APICs assumed to be messaging to Pentium local-APICs)
+ *
+ * the code is designed to be easily extended with new/different
+ * interrupt controllers, without having to do assembly magic.
+ */
+
+extern asmlinkage void ip27_irq(void);
+
+extern struct bridge_controller *irq_to_bridge[];
+extern int irq_to_slot[];
+
+/*
+ * use these macros to get the encoded nasid and widget id
+ * from the irq value
+ */
+#define IRQ_TO_BRIDGE(i)                irq_to_bridge[(i)]
+#define SLOT_FROM_PCI_IRQ(i)            irq_to_slot[i]
+
+static inline int alloc_level(int cpu, int irq)
+{
+        struct slice_data *si = cpu_data[cpu].data;
+        int level;                              /* pre-allocated entries */
+
+        level = find_first_zero_bit(si->irq_alloc_mask, LEVELS_PER_SLICE);
+        if (level >= LEVELS_PER_SLICE)
+                panic("Cpu %d flooded with devices\n", cpu);
+
+        __set_bit(level, si->irq_alloc_mask);
+        si->level_to_irq[level] = irq;
+
+        return level;
+}
+
+static inline int find_level(cpuid_t *cpunum, int irq)
+{
+        int cpu, i;
+
+        for (cpu = 0; cpu <= NR_CPUS; cpu++) {
+                struct slice_data *si = cpu_data[cpu].data;
+
+                if (!cpu_online(cpu))
+                        continue;
+
+                for (i = BASE_PCI_IRQ; i < LEVELS_PER_SLICE; i++)
+                        if (si->level_to_irq[i] == irq) {
+                                *cpunum = cpu;
+
+                                return i;
+                        }
+        }
+
+        panic("Could not identify cpu/level for irq %d\n", irq);
+}
+
+/*
+ * Find first bit set
+ */
+static int ms1bit(unsigned long x)
+{
+        int b = 0, s;
+
+        s = 16; if (x >> 16 == 0) s = 0; b += s; x >>= s;
+        s =  8; if (x >>  8 == 0) s = 0; b += s; x >>= s;
+        s =  4; if (x >>  4 == 0) s = 0; b += s; x >>= s;
+        s =  2; if (x >>  2 == 0) s = 0; b += s; x >>= s;
+        s =  1; if (x >>  1 == 0) s = 0; b += s;
+
+        return b;
+}
+
+/*
+ * This code is unnecessarily complex, because we do SA_INTERRUPT
+ * intr enabling. Basically, once we grab the set of intrs we need
+ * to service, we must mask _all_ these interrupts; firstly, to make
+ * sure the same intr does not intr again, causing recursion that
+ * can lead to stack overflow. Secondly, we can not just mask the
+ * one intr we are do_IRQing, because the non-masked intrs in the
+ * first set might intr again, causing multiple servicings of the
+ * same intr. This effect is mostly seen for intercpu intrs.
+ * Kanoj 05.13.00
+ */
+
+void ip27_do_irq_mask0(struct pt_regs *regs)
+{
+        int irq, swlevel;
+        hubreg_t pend0, mask0;
+        cpuid_t cpu = smp_processor_id();
+        int pi_int_mask0 =
+                (cputoslice(cpu) == 0) ?  PI_INT_MASK0_A : PI_INT_MASK0_B;
+
+        /* copied from Irix intpend0() */
+        pend0 = LOCAL_HUB_L(PI_INT_PEND0);
+        mask0 = LOCAL_HUB_L(pi_int_mask0);
+
+        pend0 &= mask0;         /* Pick intrs we should look at */
+        if (!pend0)
+                return;
+
+        swlevel = ms1bit(pend0);
+#ifdef CONFIG_SMP
+        if (pend0 & (1UL << CPU_RESCHED_A_IRQ)) {
+                LOCAL_HUB_CLR_INTR(CPU_RESCHED_A_IRQ);
+        } else if (pend0 & (1UL << CPU_RESCHED_B_IRQ)) {
+                LOCAL_HUB_CLR_INTR(CPU_RESCHED_B_IRQ);
+        } else if (pend0 & (1UL << CPU_CALL_A_IRQ)) {
+                LOCAL_HUB_CLR_INTR(CPU_CALL_A_IRQ);
+                smp_call_function_interrupt();
+        } else if (pend0 & (1UL << CPU_CALL_B_IRQ)) {
+                LOCAL_HUB_CLR_INTR(CPU_CALL_B_IRQ);
+                smp_call_function_interrupt();
+        } else
+#endif
+        {
+                /* "map" swlevel to irq */
+                struct slice_data *si = cpu_data[cpu].data;
+
+                irq = si->level_to_irq[swlevel];
+                do_IRQ(irq, regs);
+        }
+
+        LOCAL_HUB_L(PI_INT_PEND0);
+}
+
+void ip27_do_irq_mask1(struct pt_regs *regs)
+{
+        int irq, swlevel;
+        hubreg_t pend1, mask1;
+        cpuid_t cpu = smp_processor_id();
+        int pi_int_mask1 = (cputoslice(cpu) == 0) ?  PI_INT_MASK1_A : PI_INT_MASK1_B;
+        struct slice_data *si = cpu_data[cpu].data;
+
+        /* copied from Irix intpend0() */
+        pend1 = LOCAL_HUB_L(PI_INT_PEND1);
+        mask1 = LOCAL_HUB_L(pi_int_mask1);
+
+        pend1 &= mask1;         /* Pick intrs we should look at */
+        if (!pend1)
+                return;
+
+        swlevel = ms1bit(pend1);
+        /* "map" swlevel to irq */
+        irq = si->level_to_irq[swlevel];
+        LOCAL_HUB_CLR_INTR(swlevel);
+        do_IRQ(irq, regs);
+
+        LOCAL_HUB_L(PI_INT_PEND1);
+}
+
+void ip27_prof_timer(struct pt_regs *regs)
+{
+        panic("CPU %d got a profiling interrupt", smp_processor_id());
+}
+
+void ip27_hub_error(struct pt_regs *regs)
+{
+        panic("CPU %d got a hub error interrupt", smp_processor_id());
+}
+
+static int intr_connect_level(int cpu, int bit)
+{
+        nasid_t nasid = COMPACT_TO_NASID_NODEID(cpu_to_node(cpu));
+        struct slice_data *si = cpu_data[cpu].data;
+
+        __set_bit(bit, si->irq_enable_mask);
+
+        if (!cputoslice(cpu)) {
+                REMOTE_HUB_S(nasid, PI_INT_MASK0_A, si->irq_enable_mask[0]);
+                REMOTE_HUB_S(nasid, PI_INT_MASK1_A, si->irq_enable_mask[1]);
+        } else {
+                REMOTE_HUB_S(nasid, PI_INT_MASK0_B, si->irq_enable_mask[0]);
+                REMOTE_HUB_S(nasid, PI_INT_MASK1_B, si->irq_enable_mask[1]);
+        }
+
+        return 0;
+}
+
+static int intr_disconnect_level(int cpu, int bit)
+{
+        nasid_t nasid = COMPACT_TO_NASID_NODEID(cpu_to_node(cpu));
+        struct slice_data *si = cpu_data[cpu].data;
+
+        __clear_bit(bit, si->irq_enable_mask);
+
+        if (!cputoslice(cpu)) {
+                REMOTE_HUB_S(nasid, PI_INT_MASK0_A, si->irq_enable_mask[0]);
+                REMOTE_HUB_S(nasid, PI_INT_MASK1_A, si->irq_enable_mask[1]);
+        } else {
+                REMOTE_HUB_S(nasid, PI_INT_MASK0_B, si->irq_enable_mask[0]);
+                REMOTE_HUB_S(nasid, PI_INT_MASK1_B, si->irq_enable_mask[1]);
+        }
+
+        return 0;
+}
+
+/* Startup one of the (PCI ...) IRQs routes over a bridge.  */
+static unsigned int startup_bridge_irq(unsigned int irq)
+{
+        struct bridge_controller *bc;
+        bridgereg_t device;
+        bridge_t *bridge;
+        int pin, swlevel;
+        cpuid_t cpu;
+
+        pin = SLOT_FROM_PCI_IRQ(irq);
+        bc = IRQ_TO_BRIDGE(irq);
+        bridge = bc->base;
+
+        DBG("bridge_startup(): irq= 0x%x  pin=%d\n", irq, pin);
+        /*
+         * "map" irq to a swlevel greater than 6 since the first 6 bits
+         * of INT_PEND0 are taken
+         */
+        swlevel = find_level(&cpu, irq);
+        bridge->b_int_addr[pin].addr = (0x20000 | swlevel | (bc->nasid << 8));
+        bridge->b_int_enable |= (1 << pin);
+        bridge->b_int_enable |= 0x7ffffe00;     /* more stuff in int_enable */
+
+        /*
+         * Enable sending of an interrupt clear packt to the hub on a high to
+         * low transition of the interrupt pin.
+         *
+         * IRIX sets additional bits in the address which are documented as
+         * reserved in the bridge docs.
+         */
+        bridge->b_int_mode |= (1UL << pin);
+
+        /*
+         * We assume the bridge to have a 1:1 mapping between devices
+         * (slots) and intr pins.
+         */
+        device = bridge->b_int_device;
+        device &= ~(7 << (pin*3));
+        device |= (pin << (pin*3));
+        bridge->b_int_device = device;
+
+        bridge->b_wid_tflush;
+
+        return 0;       /* Never anything pending.  */
+}
+
+/* Shutdown one of the (PCI ...) IRQs routes over a bridge.  */
+static void shutdown_bridge_irq(unsigned int irq)
+{
+        struct bridge_controller *bc = IRQ_TO_BRIDGE(irq);
+        bridge_t *bridge = bc->base;
+        struct slice_data *si = cpu_data[bc->irq_cpu].data;
+        int pin, swlevel;
+        cpuid_t cpu;
+
+        DBG("bridge_shutdown: irq 0x%x\n", irq);
+        pin = SLOT_FROM_PCI_IRQ(irq);
+
+        /*
+         * map irq to a swlevel greater than 6 since the first 6 bits
+         * of INT_PEND0 are taken
+         */
+        swlevel = find_level(&cpu, irq);
+        intr_disconnect_level(cpu, swlevel);
+
+        __clear_bit(swlevel, si->irq_alloc_mask);
+        si->level_to_irq[swlevel] = -1;
+
+        bridge->b_int_enable &= ~(1 << pin);
+        bridge->b_wid_tflush;
+}
+
+static inline void enable_bridge_irq(unsigned int irq)
+{
+        cpuid_t cpu;
+        int swlevel;
+
+        swlevel = find_level(&cpu, irq);        /* Criminal offence */
+        intr_connect_level(cpu, swlevel);
+}
+
+static inline void disable_bridge_irq(unsigned int irq)
+{
+        cpuid_t cpu;
+        int swlevel;
+
+        swlevel = find_level(&cpu, irq);        /* Criminal offence */
+        intr_disconnect_level(cpu, swlevel);
+}
+
+static void mask_and_ack_bridge_irq(unsigned int irq)
+{
+        disable_bridge_irq(irq);
+}
+
+static void end_bridge_irq(unsigned int irq)
+{
+        if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)) &&
+            irq_desc[irq].action)
+                enable_bridge_irq(irq);
+}
+
+static struct hw_interrupt_type bridge_irq_type = {
+        .typename       = "bridge",
+        .startup        = startup_bridge_irq,
+        .shutdown       = shutdown_bridge_irq,
+        .enable         = enable_bridge_irq,
+        .disable        = disable_bridge_irq,
+        .ack            = mask_and_ack_bridge_irq,
+        .end            = end_bridge_irq,
+};
+
+static unsigned long irq_map[NR_IRQS / BITS_PER_LONG];
+
+static int allocate_irqno(void)
+{
+        int irq;
+
+again:
+        irq = find_first_zero_bit(irq_map, NR_IRQS);
+
+        if (irq >= NR_IRQS)
+                return -ENOSPC;
+
+        if (test_and_set_bit(irq, irq_map))
+                goto again;
+
+        return irq;
+}
+
+void free_irqno(unsigned int irq)
+{
+        clear_bit(irq, irq_map);
+}
+
+void __devinit register_bridge_irq(unsigned int irq)
+{
+        irq_desc[irq].status    = IRQ_DISABLED;
+        irq_desc[irq].action    = 0;
+        irq_desc[irq].depth     = 1;
+        irq_desc[irq].handler   = &bridge_irq_type;
+}
+
+int __devinit request_bridge_irq(struct bridge_controller *bc)
+{
+        int irq = allocate_irqno();
+        int swlevel, cpu;
+        nasid_t nasid;
+
+        if (irq < 0)
+                return irq;
+
+        /*
+         * "map" irq to a swlevel greater than 6 since the first 6 bits
+         * of INT_PEND0 are taken
+         */
+        cpu = bc->irq_cpu;
+        swlevel = alloc_level(cpu, irq);
+        if (unlikely(swlevel < 0)) {
+                free_irqno(irq);
+
+                return -EAGAIN;
+        }
+
+        /* Make sure it's not already pending when we connect it. */
+        nasid = COMPACT_TO_NASID_NODEID(cpu_to_node(cpu));
+        REMOTE_HUB_CLR_INTR(nasid, swlevel);
+
+        intr_connect_level(cpu, swlevel);
+
+        register_bridge_irq(irq);
+
+        return irq;
+}
+
+void __init arch_init_irq(void)
+{
+        set_except_vector(0, ip27_irq);
+}
+
+void install_ipi(void)
+{
+        int slice = LOCAL_HUB_L(PI_CPU_NUM);
+        int cpu = smp_processor_id();
+        struct slice_data *si = cpu_data[cpu].data;
+        hubreg_t mask, set;
+
+        if (slice == 0) {
+                LOCAL_HUB_CLR_INTR(CPU_RESCHED_A_IRQ);
+                LOCAL_HUB_CLR_INTR(CPU_CALL_A_IRQ);
+                mask = LOCAL_HUB_L(PI_INT_MASK0_A);     /* Slice A */
+                set = (1UL << CPU_RESCHED_A_IRQ) | (1UL << CPU_CALL_A_IRQ);
+                mask |= set;
+                si->irq_enable_mask[0] |= set;
+                si->irq_alloc_mask[0] |= set;
+                LOCAL_HUB_S(PI_INT_MASK0_A, mask);
+        } else {
+                LOCAL_HUB_CLR_INTR(CPU_RESCHED_B_IRQ);
+                LOCAL_HUB_CLR_INTR(CPU_CALL_B_IRQ);
+                mask = LOCAL_HUB_L(PI_INT_MASK0_B);     /* Slice B */
+                set = (1UL << CPU_RESCHED_B_IRQ) | (1UL << CPU_CALL_B_IRQ);
+                mask |= set;
+                si->irq_enable_mask[1] |= set;
+                si->irq_alloc_mask[1] |= set;
+                LOCAL_HUB_S(PI_INT_MASK0_B, mask);
+        }
+}