Merge branch 'tty-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

* 'tty-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (79 commits)
  TTY: serial_core: Fix crash if DCD drop during suspend
  tty/serial: atmel_serial: bootconsole removed from auto-enumerates
  Revert "TTY: call tty_driver_lookup_tty unconditionally"
  tty/serial: atmel_serial: add device tree support
  tty/serial: atmel_serial: auto-enumerate ports
  tty/serial: atmel_serial: whitespace and braces modifications
  tty/serial: atmel_serial: change platform_data variable name
  tty/serial: RS485 bindings for device tree
  TTY: call tty_driver_lookup_tty unconditionally
  TTY: pty, release tty in all ptmx_open fail paths
  TTY: make tty_add_file non-failing
  TTY: drop driver reference in tty_open fail path
  8250_pci: Fix kernel panic when pch_uart is disabled
  h8300: drivers/serial/Kconfig was moved
  parport_pc: release IO region properly if unsupported ITE887x card is found
  tty: Support compat_ioctl get/set termios_locked
  hvc_console: display printk messages on console.
  TTY: snyclinkmp: forever loop in tx_load_dma_buffer()
  tty/n_gsm: avoid fifo overflow in gsm_dlci_data_output
  tty/n_gsm: fix a bug in gsm_dlci_data_output (adaption = 2 case)
  ...

Fix up Conflicts in:
 - drivers/tty/serial/8250_pci.c
	Trivial conflict with removed duplicate device ID
 - drivers/tty/serial/atmel_serial.c
	Annoying silly conflict between "specify the port num via
	platform_data" and other changes to atmel_console_init

1 files changed, 67 insertions, 6 deletions

diff --git a/arch/mips/pmc-sierra/msp71xx/msp_serial.c b/arch/mips/pmc-sierra/msp71xx/msp_serial.c
index f7261628d8a6..a1c7c7da2336 100644
--- a/arch/mips/pmc-sierra/msp71xx/msp_serial.c
+++ b/arch/mips/pmc-sierra/msp71xx/msp_serial.c
@@ -27,6 +27,7 @@
 #include <linux/serial.h>
 #include <linux/serial_core.h>
 #include <linux/serial_reg.h>
+#include <linux/slab.h>
 
 #include <asm/bootinfo.h>
 #include <asm/io.h>
@@ -38,6 +39,55 @@
 #include <msp_int.h>
 #include <msp_regs.h>
 
+struct msp_uart_data {
+        int     last_lcr;
+};
+
+static void msp_serial_out(struct uart_port *p, int offset, int value)
+{
+        struct msp_uart_data *d = p->private_data;
+
+        if (offset == UART_LCR)
+                d->last_lcr = value;
+
+        offset <<= p->regshift;
+        writeb(value, p->membase + offset);
+}
+
+static unsigned int msp_serial_in(struct uart_port *p, int offset)
+{
+        offset <<= p->regshift;
+
+        return readb(p->membase + offset);
+}
+
+static int msp_serial_handle_irq(struct uart_port *p)
+{
+        struct msp_uart_data *d = p->private_data;
+        unsigned int iir = readb(p->membase + (UART_IIR << p->regshift));
+
+        if (serial8250_handle_irq(p, iir)) {
+                return 1;
+        } else if ((iir & UART_IIR_BUSY) == UART_IIR_BUSY) {
+                /*
+                 * The DesignWare APB UART has an Busy Detect (0x07) interrupt
+                 * meaning an LCR write attempt occurred while the UART was
+                 * busy. The interrupt must be cleared by reading the UART
+                 * status register (USR) and the LCR re-written.
+                 *
+                 * Note: MSP reserves 0x20 bytes of address space for the UART
+                 * and the USR is mapped in a separate block at an offset of
+                 * 0xc0 from the start of the UART.
+                 */
+                (void)readb(p->membase + 0xc0);
+                writeb(d->last_lcr, p->membase + (UART_LCR << p->regshift));
+
+                return 1;
+        }
+
+        return 0;
+}
+
 void __init msp_serial_setup(void)
 {
         char    *s;
@@ -59,13 +109,22 @@ void __init msp_serial_setup(void)
         up.irq          = MSP_INT_UART0;
         up.uartclk      = uartclk;
         up.regshift     = 2;
-        up.iotype       = UPIO_DWAPB; /* UPIO_MEM like */
+        up.iotype       = UPIO_MEM;
         up.flags        = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST;
         up.type         = PORT_16550A;
         up.line         = 0;
-        up.private_data         = (void*)UART0_STATUS_REG;
-        if (early_serial_setup(&up))
-                printk(KERN_ERR "Early serial init of port 0 failed\n");
+        up.serial_out   = msp_serial_out;
+        up.serial_in    = msp_serial_in;
+        up.handle_irq   = msp_serial_handle_irq;
+        up.private_data = kzalloc(sizeof(struct msp_uart_data), GFP_KERNEL);
+        if (!up.private_data) {
+                pr_err("failed to allocate uart private data\n");
+                return;
+        }
+        if (early_serial_setup(&up)) {
+                kfree(up.private_data);
+                pr_err("Early serial init of port 0 failed\n");
+        }
 
         /* Initialize the second serial port, if one exists */
         switch (mips_machtype) {
@@ -88,6 +147,8 @@ void __init msp_serial_setup(void)
         up.irq          = MSP_INT_UART1;
         up.line         = 1;
         up.private_data         = (void*)UART1_STATUS_REG;
-        if (early_serial_setup(&up))
-                printk(KERN_ERR "Early serial init of port 1 failed\n");
+        if (early_serial_setup(&up)) {
+                kfree(up.private_data);
+                pr_err("Early serial init of port 1 failed\n");
+        }
 }