Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 93 insertions, 0 deletions

diff --git a/arch/mips/pci/pci-ddb5476.c b/arch/mips/pci/pci-ddb5476.c
new file mode 100644
index 000000000000..90dd49509800
--- /dev/null
+++ b/arch/mips/pci/pci-ddb5476.c
@@ -0,0 +1,93 @@
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+
+#include <asm/debug.h>
+
+#include <asm/ddb5xxx/ddb5xxx.h>
+
+static struct resource extpci_io_resource = {
+        "pci IO space",
+        0x1000,                 /* leave some room for ISA bus */
+        DDB_PCI_IO_SIZE - 1,
+        IORESOURCE_IO
+};
+
+static struct resource extpci_mem_resource = {
+        "pci memory space",
+        DDB_PCI_MEM_BASE + 0x00100000,  /* leave 1 MB for RTC */
+        DDB_PCI_MEM_BASE + DDB_PCI_MEM_SIZE - 1,
+        IORESOURCE_MEM
+};
+
+extern struct pci_ops ddb5476_ext_pci_ops;
+
+struct pci_controller ddb5476_controller = {
+        .pci_ops        = &ddb5476_ext_pci_ops,
+        .io_resource    = &extpci_io_resource,
+        .mem_resource   = &extpci_mem_resource
+};
+
+
+/*
+ * we fix up irqs based on the slot number.
+ * The first entry is at AD:11.
+ *
+ * This does not work for devices on sub-buses yet.
+ */
+
+/*
+ * temporary
+ */
+
+#define         PCI_EXT_INTA            8
+#define         PCI_EXT_INTB            9
+#define         PCI_EXT_INTC            10
+#define         PCI_EXT_INTD            11
+#define         PCI_EXT_INTE            12
+
+/*
+ * based on ddb5477 manual page 11
+ */
+#define         MAX_SLOT_NUM            21
+static unsigned char irq_map[MAX_SLOT_NUM] = {
+ [ 2] = 9,                              /* AD:13        USB             */
+ [ 3] = 10,                             /* AD:14        PMU             */
+ [ 5] = 0,                              /* AD:16        P2P bridge      */
+ [ 6] = nile4_to_irq(PCI_EXT_INTB),     /* AD:17                        */
+ [ 7] = nile4_to_irq(PCI_EXT_INTC),     /* AD:18                        */
+ [ 8] = nile4_to_irq(PCI_EXT_INTD),     /* AD:19                        */
+ [ 9] = nile4_to_irq(PCI_EXT_INTA),     /* AD:20                        */
+ [13] = 14,                             /* AD:24 HD controller, M5229   */
+};
+
+int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+        return irq_map[slot];
+}
+
+/* Do platform specific device initialization at pci_enable_device() time */
+int pcibios_plat_dev_init(struct pci_dev *dev)
+{
+        return 0;
+}
+
+void __init ddb_pci_reset_bus(void)
+{
+        u32 temp;
+
+        /*
+         * I am not sure about the "official" procedure, the following
+         * steps work as far as I know:
+         * We first set PCI cold reset bit (bit 31) in PCICTRL-H.
+         * Then we clear the PCI warm reset bit (bit 30) to 0 in PCICTRL-H.
+         * The same is true for both PCI channels.
+         */
+        temp = ddb_in32(DDB_PCICTRL + 4);
+        temp |= 0x80000000;
+        ddb_out32(DDB_PCICTRL + 4, temp);
+        temp &= ~0xc0000000;
+        ddb_out32(DDB_PCICTRL + 4, temp);
+
+}