[MIPS] Remove support for NEC DDB5074.

As warned several times before.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

1 files changed, 0 insertions, 79 deletions

diff --git a/arch/mips/pci/pci-ddb5074.c b/arch/mips/pci/pci-ddb5074.c
deleted file mode 100644
index b74158d9b4b1..000000000000
--- a/arch/mips/pci/pci-ddb5074.c
+++ /dev/null
@@ -1,79 +0,0 @@
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/pci.h>
-
-#include <asm/debug.h>
-
-#include <asm/ddb5xxx/ddb5xxx.h>
-
-static struct resource extpci_io_resource = {
-        .start  = 0x1000,               /* leave some room for ISA bus */
-        .end    = DDB_PCI_IO_SIZE - 1,
-        .name   = "pci IO space",
-        .flags  = IORESOURCE_IO
-};
-
-static struct resource extpci_mem_resource = {
-        .start  = DDB_PCI_MEM_BASE + 0x00100000,        /* leave 1 MB for RTC */
-        .end    = DDB_PCI_MEM_BASE + DDB_PCI_MEM_SIZE - 1,
-        .name   = "pci memory space",
-        .flags  = IORESOURCE_MEM
-};
-
-extern struct pci_ops ddb5476_ext_pci_ops;
-
-struct pci_controller ddb5476_controller = {
-        .pci_ops        = &ddb5476_ext_pci_ops,
-        .io_resource    = &extpci_io_resource,
-        .mem_resource   = &extpci_mem_resource,
-};
-
-#define     PCI_EXT_INTA        8
-#define     PCI_EXT_INTB        9
-#define     PCI_EXT_INTC        10
-#define     PCI_EXT_INTD        11
-#define     PCI_EXT_INTE        12
-
-#define     MAX_SLOT_NUM        14
-
-static unsigned char irq_map[MAX_SLOT_NUM] = {
-  [ 0] = nile4_to_irq(PCI_EXT_INTE),
-  [ 1] = nile4_to_irq(PCI_EXT_INTA),
-  [ 2] = nile4_to_irq(PCI_EXT_INTA),
-  [ 3] = nile4_to_irq(PCI_EXT_INTB),
-  [ 4] = nile4_to_irq(PCI_EXT_INTC),
-  [ 5] = nile4_to_irq(NILE4_INT_UART),
-  [10] = nile4_to_irq(PCI_EXT_INTE),
-  [13] = nile4_to_irq(PCI_EXT_INTE),
-};
-
-int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
-{
-        return irq_map[slot];
-}
-
-/* Do platform specific device initialization at pci_enable_device() time */
-int pcibios_plat_dev_init(struct pci_dev *dev)
-{
-        return 0;
-}
-
-void __init ddb_pci_reset_bus(void)
-{
-        u32 temp;
-
-        /*
-         * I am not sure about the "official" procedure, the following
-         * steps work as far as I know:
-         * We first set PCI cold reset bit (bit 31) in PCICTRL-H.
-         * Then we clear the PCI warm reset bit (bit 30) to 0 in PCICTRL-H.
-         * The same is true for both PCI channels.
-         */
-        temp = ddb_in32(DDB_PCICTRL + 4);
-        temp |= 0x80000000;
-        ddb_out32(DDB_PCICTRL + 4, temp);
-        temp &= ~0xc0000000;
-        ddb_out32(DDB_PCICTRL + 4, temp);
-
-}