Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 153 insertions, 0 deletions

diff --git a/arch/mips/mips-boards/generic/mipsIRQ.S b/arch/mips/mips-boards/generic/mipsIRQ.S
new file mode 100644
index 000000000000..131f49bccb20
--- /dev/null
+++ b/arch/mips/mips-boards/generic/mipsIRQ.S
@@ -0,0 +1,153 @@
+/*
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 1999, 2000 MIPS Technologies, Inc.  All rights reserved.
+ *
+ * ########################################################################
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * ########################################################################
+ *
+ * Interrupt exception dispatch code.
+ *
+ */
+#include <linux/config.h>
+
+#include <asm/asm.h>
+#include <asm/mipsregs.h>
+#include <asm/regdef.h>
+#include <asm/stackframe.h>
+
+/* A lot of complication here is taken away because:
+ *
+ * 1) We handle one interrupt and return, sitting in a loop and moving across
+ *    all the pending IRQ bits in the cause register is _NOT_ the answer, the
+ *    common case is one pending IRQ so optimize in that direction.
+ *
+ * 2) We need not check against bits in the status register IRQ mask, that
+ *    would make this routine slow as hell.
+ *
+ * 3) Linux only thinks in terms of all IRQs on or all IRQs off, nothing in
+ *    between like BSD spl() brain-damage.
+ *
+ * Furthermore, the IRQs on the MIPS board look basically (barring software
+ * IRQs which we don't use at all and all external interrupt sources are
+ * combined together on hardware interrupt 0 (MIPS IRQ 2)) like:
+ *
+ *      MIPS IRQ        Source
+ *      --------        ------
+ *             0        Software (ignored)
+ *             1        Software (ignored)
+ *             2        Combined hardware interrupt (hw0)
+ *             3        Hardware (ignored)
+ *             4        Hardware (ignored)
+ *             5        Hardware (ignored)
+ *             6        Hardware (ignored)
+ *             7        R4k timer (what we use)
+ *
+ * Note: On the SEAD board thing are a little bit different.
+ *       Here IRQ 2 (hw0) is wired to the UART0 and IRQ 3 (hw1) is wired
+ *       wired to UART1.
+ *
+ * We handle the IRQ according to _our_ priority which is:
+ *
+ * Highest ----     R4k Timer
+ * Lowest  ----     Combined hardware interrupt
+ *
+ * then we just return, if multiple IRQs are pending then we will just take
+ * another exception, big deal.
+ */
+
+        .text
+        .set    noreorder
+        .set    noat
+        .align  5
+        NESTED(mipsIRQ, PT_SIZE, sp)
+        SAVE_ALL
+        CLI
+        .set    at
+
+        mfc0    s0, CP0_CAUSE           # get irq bits
+        mfc0    s1, CP0_STATUS          # get irq mask
+        and     s0, s1
+
+        /* First we check for r4k counter/timer IRQ. */
+        andi    a0, s0, CAUSEF_IP7
+        beq     a0, zero, 1f
+         andi   a0, s0, CAUSEF_IP2      # delay slot, check hw0 interrupt
+
+        /* Wheee, a timer interrupt. */
+        move    a0, sp
+        jal     mips_timer_interrupt
+         nop
+
+        j       ret_from_irq
+         nop
+
+1:
+#if defined(CONFIG_MIPS_SEAD)
+        beq     a0, zero, 1f
+         andi   a0, s0, CAUSEF_IP3      # delay slot, check hw1 interrupt
+#else
+        beq     a0, zero, 1f            # delay slot, check hw3 interrupt
+         andi   a0, s0, CAUSEF_IP5
+#endif
+
+        /* Wheee, combined hardware level zero interrupt. */
+#if defined(CONFIG_MIPS_ATLAS)
+        jal     atlas_hw0_irqdispatch
+#elif defined(CONFIG_MIPS_MALTA)
+        jal     malta_hw0_irqdispatch
+#elif defined(CONFIG_MIPS_SEAD)
+        jal     sead_hw0_irqdispatch
+#else
+#error "MIPS board not supported\n"
+#endif
+         move   a0, sp                  # delay slot
+
+        j       ret_from_irq
+         nop                            # delay slot
+
+1:
+#if defined(CONFIG_MIPS_SEAD)
+        beq     a0, zero, 1f
+         andi   a0, s0, CAUSEF_IP5      # delay slot, check hw3 interrupt
+        jal     sead_hw1_irqdispatch
+         move   a0, sp                  # delay slot
+        j       ret_from_irq
+         nop                            # delay slot
+1:
+#endif
+#if defined(CONFIG_MIPS_MALTA)
+        beq     a0, zero, 1f            # check hw3 (coreHI) interrupt
+         nop
+        jal     corehi_irqdispatch
+         move   a0, sp
+        j       ret_from_irq
+         nop
+1:
+#endif
+        /*
+         * Here by mistake?  This is possible, what can happen is that by the
+         * time we take the exception the IRQ pin goes low, so just leave if
+         * this is the case.
+         */
+        move    a1,s0
+        PRINT("Got interrupt: c0_cause = %08x\n")
+        mfc0    a1, CP0_EPC
+        PRINT("c0_epc = %08x\n")
+
+        j       ret_from_irq
+         nop
+        END(mipsIRQ)