aboutsummaryrefslogtreecommitdiffstats
path: root/arch/mips/kernel
diff options
context:
space:
mode:
authorJason Wessel <jason.wessel@windriver.com>2008-07-29 16:58:52 -0400
committerRalf Baechle <ralf@linux-mips.org>2008-07-30 16:54:42 -0400
commit8d60a903d986ffa26c41f0092320a3b9da20bfaf (patch)
treef05a8ae48e275d55fcfd3acfb7b3b1b601da56ea /arch/mips/kernel
parent8f8da9adebdf04bfb3b812a7de8706fbf179fd2c (diff)
[MIPS] kgdb: Remove existing implementation
This patch explicitly removes the kgdb implementation, for mips which is intended to be followed by a patch that adds a kgdb implementation for MIPS that makes use of the kgdb core in the kernel. Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Diffstat (limited to 'arch/mips/kernel')
-rw-r--r--arch/mips/kernel/Makefile1
-rw-r--r--arch/mips/kernel/gdb-low.S394
-rw-r--r--arch/mips/kernel/gdb-stub.c1155
-rw-r--r--arch/mips/kernel/irq.c21
4 files changed, 0 insertions, 1571 deletions
diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile
index 0fd31974ba28..73ff048eaa55 100644
--- a/arch/mips/kernel/Makefile
+++ b/arch/mips/kernel/Makefile
@@ -71,7 +71,6 @@ obj-$(CONFIG_MIPS32_COMPAT) += linux32.o ptrace32.o signal32.o
71obj-$(CONFIG_MIPS32_N32) += binfmt_elfn32.o scall64-n32.o signal_n32.o 71obj-$(CONFIG_MIPS32_N32) += binfmt_elfn32.o scall64-n32.o signal_n32.o
72obj-$(CONFIG_MIPS32_O32) += binfmt_elfo32.o scall64-o32.o 72obj-$(CONFIG_MIPS32_O32) += binfmt_elfo32.o scall64-o32.o
73 73
74obj-$(CONFIG_KGDB) += gdb-low.o gdb-stub.o
75obj-$(CONFIG_PROC_FS) += proc.o 74obj-$(CONFIG_PROC_FS) += proc.o
76 75
77obj-$(CONFIG_64BIT) += cpu-bugs64.o 76obj-$(CONFIG_64BIT) += cpu-bugs64.o
diff --git a/arch/mips/kernel/gdb-low.S b/arch/mips/kernel/gdb-low.S
deleted file mode 100644
index 2c446063636a..000000000000
--- a/arch/mips/kernel/gdb-low.S
+++ /dev/null
@@ -1,394 +0,0 @@
1/*
2 * gdb-low.S contains the low-level trap handler for the GDB stub.
3 *
4 * Copyright (C) 1995 Andreas Busse
5 */
6#include <linux/sys.h>
7
8#include <asm/asm.h>
9#include <asm/errno.h>
10#include <asm/irqflags.h>
11#include <asm/mipsregs.h>
12#include <asm/regdef.h>
13#include <asm/stackframe.h>
14#include <asm/gdb-stub.h>
15
16#ifdef CONFIG_32BIT
17#define DMFC0 mfc0
18#define DMTC0 mtc0
19#define LDC1 lwc1
20#define SDC1 lwc1
21#endif
22#ifdef CONFIG_64BIT
23#define DMFC0 dmfc0
24#define DMTC0 dmtc0
25#define LDC1 ldc1
26#define SDC1 ldc1
27#endif
28
29/*
30 * [jsun] We reserves about 2x GDB_FR_SIZE in stack. The lower (addressed)
31 * part is used to store registers and passed to exception handler.
32 * The upper part is reserved for "call func" feature where gdb client
33 * saves some of the regs, setups call frame and passes args.
34 *
35 * A trace shows about 200 bytes are used to store about half of all regs.
36 * The rest should be big enough for frame setup and passing args.
37 */
38
39/*
40 * The low level trap handler
41 */
42 .align 5
43 NESTED(trap_low, GDB_FR_SIZE, sp)
44 .set noat
45 .set noreorder
46
47 mfc0 k0, CP0_STATUS
48 sll k0, 3 /* extract cu0 bit */
49 bltz k0, 1f
50 move k1, sp
51
52 /*
53 * Called from user mode, go somewhere else.
54 */
55 mfc0 k0, CP0_CAUSE
56 andi k0, k0, 0x7c
57#ifdef CONFIG_64BIT
58 dsll k0, k0, 1
59#endif
60 PTR_L k1, saved_vectors(k0)
61 jr k1
62 nop
631:
64 move k0, sp
65 PTR_SUBU sp, k1, GDB_FR_SIZE*2 # see comment above
66 LONG_S k0, GDB_FR_REG29(sp)
67 LONG_S $2, GDB_FR_REG2(sp)
68
69/*
70 * First save the CP0 and special registers
71 */
72
73 mfc0 v0, CP0_STATUS
74 LONG_S v0, GDB_FR_STATUS(sp)
75 mfc0 v0, CP0_CAUSE
76 LONG_S v0, GDB_FR_CAUSE(sp)
77 DMFC0 v0, CP0_EPC
78 LONG_S v0, GDB_FR_EPC(sp)
79 DMFC0 v0, CP0_BADVADDR
80 LONG_S v0, GDB_FR_BADVADDR(sp)
81 mfhi v0
82 LONG_S v0, GDB_FR_HI(sp)
83 mflo v0
84 LONG_S v0, GDB_FR_LO(sp)
85
86/*
87 * Now the integer registers
88 */
89
90 LONG_S zero, GDB_FR_REG0(sp) /* I know... */
91 LONG_S $1, GDB_FR_REG1(sp)
92 /* v0 already saved */
93 LONG_S $3, GDB_FR_REG3(sp)
94 LONG_S $4, GDB_FR_REG4(sp)
95 LONG_S $5, GDB_FR_REG5(sp)
96 LONG_S $6, GDB_FR_REG6(sp)
97 LONG_S $7, GDB_FR_REG7(sp)
98 LONG_S $8, GDB_FR_REG8(sp)
99 LONG_S $9, GDB_FR_REG9(sp)
100 LONG_S $10, GDB_FR_REG10(sp)
101 LONG_S $11, GDB_FR_REG11(sp)
102 LONG_S $12, GDB_FR_REG12(sp)
103 LONG_S $13, GDB_FR_REG13(sp)
104 LONG_S $14, GDB_FR_REG14(sp)
105 LONG_S $15, GDB_FR_REG15(sp)
106 LONG_S $16, GDB_FR_REG16(sp)
107 LONG_S $17, GDB_FR_REG17(sp)
108 LONG_S $18, GDB_FR_REG18(sp)
109 LONG_S $19, GDB_FR_REG19(sp)
110 LONG_S $20, GDB_FR_REG20(sp)
111 LONG_S $21, GDB_FR_REG21(sp)
112 LONG_S $22, GDB_FR_REG22(sp)
113 LONG_S $23, GDB_FR_REG23(sp)
114 LONG_S $24, GDB_FR_REG24(sp)
115 LONG_S $25, GDB_FR_REG25(sp)
116 LONG_S $26, GDB_FR_REG26(sp)
117 LONG_S $27, GDB_FR_REG27(sp)
118 LONG_S $28, GDB_FR_REG28(sp)
119 /* sp already saved */
120 LONG_S $30, GDB_FR_REG30(sp)
121 LONG_S $31, GDB_FR_REG31(sp)
122
123 CLI /* disable interrupts */
124 TRACE_IRQS_OFF
125
126/*
127 * Followed by the floating point registers
128 */
129 mfc0 v0, CP0_STATUS /* FPU enabled? */
130 srl v0, v0, 16
131 andi v0, v0, (ST0_CU1 >> 16)
132
133 beqz v0,2f /* disabled, skip */
134 nop
135
136 SDC1 $0, GDB_FR_FPR0(sp)
137 SDC1 $1, GDB_FR_FPR1(sp)
138 SDC1 $2, GDB_FR_FPR2(sp)
139 SDC1 $3, GDB_FR_FPR3(sp)
140 SDC1 $4, GDB_FR_FPR4(sp)
141 SDC1 $5, GDB_FR_FPR5(sp)
142 SDC1 $6, GDB_FR_FPR6(sp)
143 SDC1 $7, GDB_FR_FPR7(sp)
144 SDC1 $8, GDB_FR_FPR8(sp)
145 SDC1 $9, GDB_FR_FPR9(sp)
146 SDC1 $10, GDB_FR_FPR10(sp)
147 SDC1 $11, GDB_FR_FPR11(sp)
148 SDC1 $12, GDB_FR_FPR12(sp)
149 SDC1 $13, GDB_FR_FPR13(sp)
150 SDC1 $14, GDB_FR_FPR14(sp)
151 SDC1 $15, GDB_FR_FPR15(sp)
152 SDC1 $16, GDB_FR_FPR16(sp)
153 SDC1 $17, GDB_FR_FPR17(sp)
154 SDC1 $18, GDB_FR_FPR18(sp)
155 SDC1 $19, GDB_FR_FPR19(sp)
156 SDC1 $20, GDB_FR_FPR20(sp)
157 SDC1 $21, GDB_FR_FPR21(sp)
158 SDC1 $22, GDB_FR_FPR22(sp)
159 SDC1 $23, GDB_FR_FPR23(sp)
160 SDC1 $24, GDB_FR_FPR24(sp)
161 SDC1 $25, GDB_FR_FPR25(sp)
162 SDC1 $26, GDB_FR_FPR26(sp)
163 SDC1 $27, GDB_FR_FPR27(sp)
164 SDC1 $28, GDB_FR_FPR28(sp)
165 SDC1 $29, GDB_FR_FPR29(sp)
166 SDC1 $30, GDB_FR_FPR30(sp)
167 SDC1 $31, GDB_FR_FPR31(sp)
168
169/*
170 * FPU control registers
171 */
172
173 cfc1 v0, CP1_STATUS
174 LONG_S v0, GDB_FR_FSR(sp)
175 cfc1 v0, CP1_REVISION
176 LONG_S v0, GDB_FR_FIR(sp)
177
178/*
179 * Current stack frame ptr
180 */
181
1822:
183 LONG_S sp, GDB_FR_FRP(sp)
184
185/*
186 * CP0 registers (R4000/R4400 unused registers skipped)
187 */
188
189 mfc0 v0, CP0_INDEX
190 LONG_S v0, GDB_FR_CP0_INDEX(sp)
191 mfc0 v0, CP0_RANDOM
192 LONG_S v0, GDB_FR_CP0_RANDOM(sp)
193 DMFC0 v0, CP0_ENTRYLO0
194 LONG_S v0, GDB_FR_CP0_ENTRYLO0(sp)
195 DMFC0 v0, CP0_ENTRYLO1
196 LONG_S v0, GDB_FR_CP0_ENTRYLO1(sp)
197 DMFC0 v0, CP0_CONTEXT
198 LONG_S v0, GDB_FR_CP0_CONTEXT(sp)
199 mfc0 v0, CP0_PAGEMASK
200 LONG_S v0, GDB_FR_CP0_PAGEMASK(sp)
201 mfc0 v0, CP0_WIRED
202 LONG_S v0, GDB_FR_CP0_WIRED(sp)
203 DMFC0 v0, CP0_ENTRYHI
204 LONG_S v0, GDB_FR_CP0_ENTRYHI(sp)
205 mfc0 v0, CP0_PRID
206 LONG_S v0, GDB_FR_CP0_PRID(sp)
207
208 .set at
209
210/*
211 * Continue with the higher level handler
212 */
213
214 move a0,sp
215
216 jal handle_exception
217 nop
218
219/*
220 * Restore all writable registers, in reverse order
221 */
222
223 .set noat
224
225 LONG_L v0, GDB_FR_CP0_ENTRYHI(sp)
226 LONG_L v1, GDB_FR_CP0_WIRED(sp)
227 DMTC0 v0, CP0_ENTRYHI
228 mtc0 v1, CP0_WIRED
229 LONG_L v0, GDB_FR_CP0_PAGEMASK(sp)
230 LONG_L v1, GDB_FR_CP0_ENTRYLO1(sp)
231 mtc0 v0, CP0_PAGEMASK
232 DMTC0 v1, CP0_ENTRYLO1
233 LONG_L v0, GDB_FR_CP0_ENTRYLO0(sp)
234 LONG_L v1, GDB_FR_CP0_INDEX(sp)
235 DMTC0 v0, CP0_ENTRYLO0
236 LONG_L v0, GDB_FR_CP0_CONTEXT(sp)
237 mtc0 v1, CP0_INDEX
238 DMTC0 v0, CP0_CONTEXT
239
240
241/*
242 * Next, the floating point registers
243 */
244 mfc0 v0, CP0_STATUS /* check if the FPU is enabled */
245 srl v0, v0, 16
246 andi v0, v0, (ST0_CU1 >> 16)
247
248 beqz v0, 3f /* disabled, skip */
249 nop
250
251 LDC1 $31, GDB_FR_FPR31(sp)
252 LDC1 $30, GDB_FR_FPR30(sp)
253 LDC1 $29, GDB_FR_FPR29(sp)
254 LDC1 $28, GDB_FR_FPR28(sp)
255 LDC1 $27, GDB_FR_FPR27(sp)
256 LDC1 $26, GDB_FR_FPR26(sp)
257 LDC1 $25, GDB_FR_FPR25(sp)
258 LDC1 $24, GDB_FR_FPR24(sp)
259 LDC1 $23, GDB_FR_FPR23(sp)
260 LDC1 $22, GDB_FR_FPR22(sp)
261 LDC1 $21, GDB_FR_FPR21(sp)
262 LDC1 $20, GDB_FR_FPR20(sp)
263 LDC1 $19, GDB_FR_FPR19(sp)
264 LDC1 $18, GDB_FR_FPR18(sp)
265 LDC1 $17, GDB_FR_FPR17(sp)
266 LDC1 $16, GDB_FR_FPR16(sp)
267 LDC1 $15, GDB_FR_FPR15(sp)
268 LDC1 $14, GDB_FR_FPR14(sp)
269 LDC1 $13, GDB_FR_FPR13(sp)
270 LDC1 $12, GDB_FR_FPR12(sp)
271 LDC1 $11, GDB_FR_FPR11(sp)
272 LDC1 $10, GDB_FR_FPR10(sp)
273 LDC1 $9, GDB_FR_FPR9(sp)
274 LDC1 $8, GDB_FR_FPR8(sp)
275 LDC1 $7, GDB_FR_FPR7(sp)
276 LDC1 $6, GDB_FR_FPR6(sp)
277 LDC1 $5, GDB_FR_FPR5(sp)
278 LDC1 $4, GDB_FR_FPR4(sp)
279 LDC1 $3, GDB_FR_FPR3(sp)
280 LDC1 $2, GDB_FR_FPR2(sp)
281 LDC1 $1, GDB_FR_FPR1(sp)
282 LDC1 $0, GDB_FR_FPR0(sp)
283
284/*
285 * Now the CP0 and integer registers
286 */
287
2883:
289#ifdef CONFIG_MIPS_MT_SMTC
290 /* Read-modify write of Status must be atomic */
291 mfc0 t2, CP0_TCSTATUS
292 ori t1, t2, TCSTATUS_IXMT
293 mtc0 t1, CP0_TCSTATUS
294 andi t2, t2, TCSTATUS_IXMT
295 _ehb
296 DMT 9 # dmt t1
297 jal mips_ihb
298 nop
299#endif /* CONFIG_MIPS_MT_SMTC */
300 mfc0 t0, CP0_STATUS
301 ori t0, 0x1f
302 xori t0, 0x1f
303 mtc0 t0, CP0_STATUS
304#ifdef CONFIG_MIPS_MT_SMTC
305 andi t1, t1, VPECONTROL_TE
306 beqz t1, 9f
307 nop
308 EMT # emt
3099:
310 mfc0 t1, CP0_TCSTATUS
311 xori t1, t1, TCSTATUS_IXMT
312 or t1, t1, t2
313 mtc0 t1, CP0_TCSTATUS
314 _ehb
315#endif /* CONFIG_MIPS_MT_SMTC */
316 LONG_L v0, GDB_FR_STATUS(sp)
317 LONG_L v1, GDB_FR_EPC(sp)
318 mtc0 v0, CP0_STATUS
319 DMTC0 v1, CP0_EPC
320 LONG_L v0, GDB_FR_HI(sp)
321 LONG_L v1, GDB_FR_LO(sp)
322 mthi v0
323 mtlo v1
324 LONG_L $31, GDB_FR_REG31(sp)
325 LONG_L $30, GDB_FR_REG30(sp)
326 LONG_L $28, GDB_FR_REG28(sp)
327 LONG_L $27, GDB_FR_REG27(sp)
328 LONG_L $26, GDB_FR_REG26(sp)
329 LONG_L $25, GDB_FR_REG25(sp)
330 LONG_L $24, GDB_FR_REG24(sp)
331 LONG_L $23, GDB_FR_REG23(sp)
332 LONG_L $22, GDB_FR_REG22(sp)
333 LONG_L $21, GDB_FR_REG21(sp)
334 LONG_L $20, GDB_FR_REG20(sp)
335 LONG_L $19, GDB_FR_REG19(sp)
336 LONG_L $18, GDB_FR_REG18(sp)
337 LONG_L $17, GDB_FR_REG17(sp)
338 LONG_L $16, GDB_FR_REG16(sp)
339 LONG_L $15, GDB_FR_REG15(sp)
340 LONG_L $14, GDB_FR_REG14(sp)
341 LONG_L $13, GDB_FR_REG13(sp)
342 LONG_L $12, GDB_FR_REG12(sp)
343 LONG_L $11, GDB_FR_REG11(sp)
344 LONG_L $10, GDB_FR_REG10(sp)
345 LONG_L $9, GDB_FR_REG9(sp)
346 LONG_L $8, GDB_FR_REG8(sp)
347 LONG_L $7, GDB_FR_REG7(sp)
348 LONG_L $6, GDB_FR_REG6(sp)
349 LONG_L $5, GDB_FR_REG5(sp)
350 LONG_L $4, GDB_FR_REG4(sp)
351 LONG_L $3, GDB_FR_REG3(sp)
352 LONG_L $2, GDB_FR_REG2(sp)
353 LONG_L $1, GDB_FR_REG1(sp)
354#if defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX)
355 LONG_L k0, GDB_FR_EPC(sp)
356 LONG_L $29, GDB_FR_REG29(sp) /* Deallocate stack */
357 jr k0
358 rfe
359#else
360 LONG_L sp, GDB_FR_REG29(sp) /* Deallocate stack */
361
362 .set mips3
363 eret
364 .set mips0
365#endif
366 .set at
367 .set reorder
368 END(trap_low)
369
370LEAF(kgdb_read_byte)
3714: lb t0, (a0)
372 sb t0, (a1)
373 li v0, 0
374 jr ra
375 .section __ex_table,"a"
376 PTR 4b, kgdbfault
377 .previous
378 END(kgdb_read_byte)
379
380LEAF(kgdb_write_byte)
3815: sb a0, (a1)
382 li v0, 0
383 jr ra
384 .section __ex_table,"a"
385 PTR 5b, kgdbfault
386 .previous
387 END(kgdb_write_byte)
388
389 .type kgdbfault@function
390 .ent kgdbfault
391
392kgdbfault: li v0, -EFAULT
393 jr ra
394 .end kgdbfault
diff --git a/arch/mips/kernel/gdb-stub.c b/arch/mips/kernel/gdb-stub.c
deleted file mode 100644
index 25f4eab8ea9c..000000000000
--- a/arch/mips/kernel/gdb-stub.c
+++ /dev/null
@@ -1,1155 +0,0 @@
1/*
2 * arch/mips/kernel/gdb-stub.c
3 *
4 * Originally written by Glenn Engel, Lake Stevens Instrument Division
5 *
6 * Contributed by HP Systems
7 *
8 * Modified for SPARC by Stu Grossman, Cygnus Support.
9 *
10 * Modified for Linux/MIPS (and MIPS in general) by Andreas Busse
11 * Send complaints, suggestions etc. to <andy@waldorf-gmbh.de>
12 *
13 * Copyright (C) 1995 Andreas Busse
14 *
15 * Copyright (C) 2003 MontaVista Software Inc.
16 * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
17 */
18
19/*
20 * To enable debugger support, two things need to happen. One, a
21 * call to set_debug_traps() is necessary in order to allow any breakpoints
22 * or error conditions to be properly intercepted and reported to gdb.
23 * Two, a breakpoint needs to be generated to begin communication. This
24 * is most easily accomplished by a call to breakpoint(). Breakpoint()
25 * simulates a breakpoint by executing a BREAK instruction.
26 *
27 *
28 * The following gdb commands are supported:
29 *
30 * command function Return value
31 *
32 * g return the value of the CPU registers hex data or ENN
33 * G set the value of the CPU registers OK or ENN
34 *
35 * mAA..AA,LLLL Read LLLL bytes at address AA..AA hex data or ENN
36 * MAA..AA,LLLL: Write LLLL bytes at address AA.AA OK or ENN
37 *
38 * c Resume at current address SNN ( signal NN)
39 * cAA..AA Continue at address AA..AA SNN
40 *
41 * s Step one instruction SNN
42 * sAA..AA Step one instruction from AA..AA SNN
43 *
44 * k kill
45 *
46 * ? What was the last sigval ? SNN (signal NN)
47 *
48 * bBB..BB Set baud rate to BB..BB OK or BNN, then sets
49 * baud rate
50 *
51 * All commands and responses are sent with a packet which includes a
52 * checksum. A packet consists of
53 *
54 * $<packet info>#<checksum>.
55 *
56 * where
57 * <packet info> :: <characters representing the command or response>
58 * <checksum> :: < two hex digits computed as modulo 256 sum of <packetinfo>>
59 *
60 * When a packet is received, it is first acknowledged with either '+' or '-'.
61 * '+' indicates a successful transfer. '-' indicates a failed transfer.
62 *
63 * Example:
64 *
65 * Host: Reply:
66 * $m0,10#2a +$00010203040506070809101112131415#42
67 *
68 *
69 * ==============
70 * MORE EXAMPLES:
71 * ==============
72 *
73 * For reference -- the following are the steps that one
74 * company took (RidgeRun Inc) to get remote gdb debugging
75 * going. In this scenario the host machine was a PC and the
76 * target platform was a Galileo EVB64120A MIPS evaluation
77 * board.
78 *
79 * Step 1:
80 * First download gdb-5.0.tar.gz from the internet.
81 * and then build/install the package.
82 *
83 * Example:
84 * $ tar zxf gdb-5.0.tar.gz
85 * $ cd gdb-5.0
86 * $ ./configure --target=mips-linux-elf
87 * $ make
88 * $ install
89 * $ which mips-linux-elf-gdb
90 * /usr/local/bin/mips-linux-elf-gdb
91 *
92 * Step 2:
93 * Configure linux for remote debugging and build it.
94 *
95 * Example:
96 * $ cd ~/linux
97 * $ make menuconfig <go to "Kernel Hacking" and turn on remote debugging>
98 * $ make
99 *
100 * Step 3:
101 * Download the kernel to the remote target and start
102 * the kernel running. It will promptly halt and wait
103 * for the host gdb session to connect. It does this
104 * since the "Kernel Hacking" option has defined
105 * CONFIG_KGDB which in turn enables your calls
106 * to:
107 * set_debug_traps();
108 * breakpoint();
109 *
110 * Step 4:
111 * Start the gdb session on the host.
112 *
113 * Example:
114 * $ mips-linux-elf-gdb vmlinux
115 * (gdb) set remotebaud 115200
116 * (gdb) target remote /dev/ttyS1
117 * ...at this point you are connected to
118 * the remote target and can use gdb
119 * in the normal fasion. Setting
120 * breakpoints, single stepping,
121 * printing variables, etc.
122 */
123#include <linux/string.h>
124#include <linux/kernel.h>
125#include <linux/signal.h>
126#include <linux/sched.h>
127#include <linux/mm.h>
128#include <linux/console.h>
129#include <linux/init.h>
130#include <linux/smp.h>
131#include <linux/spinlock.h>
132#include <linux/slab.h>
133#include <linux/reboot.h>
134
135#include <asm/asm.h>
136#include <asm/cacheflush.h>
137#include <asm/mipsregs.h>
138#include <asm/pgtable.h>
139#include <asm/system.h>
140#include <asm/gdb-stub.h>
141#include <asm/inst.h>
142
143/*
144 * external low-level support routines
145 */
146
147extern int putDebugChar(char c); /* write a single character */
148extern char getDebugChar(void); /* read and return a single char */
149extern void trap_low(void);
150
151/*
152 * breakpoint and test functions
153 */
154extern void breakpoint(void);
155extern void breakinst(void);
156extern void async_breakpoint(void);
157extern void async_breakinst(void);
158extern void adel(void);
159
160/*
161 * local prototypes
162 */
163
164static void getpacket(char *buffer);
165static void putpacket(char *buffer);
166static int computeSignal(int tt);
167static int hex(unsigned char ch);
168static int hexToInt(char **ptr, int *intValue);
169static int hexToLong(char **ptr, long *longValue);
170static unsigned char *mem2hex(char *mem, char *buf, int count, int may_fault);
171void handle_exception(struct gdb_regs *regs);
172
173int kgdb_enabled;
174
175/*
176 * spin locks for smp case
177 */
178static DEFINE_SPINLOCK(kgdb_lock);
179static raw_spinlock_t kgdb_cpulock[NR_CPUS] = {
180 [0 ... NR_CPUS-1] = __RAW_SPIN_LOCK_UNLOCKED,
181};
182
183/*
184 * BUFMAX defines the maximum number of characters in inbound/outbound buffers
185 * at least NUMREGBYTES*2 are needed for register packets
186 */
187#define BUFMAX 2048
188
189static char input_buffer[BUFMAX];
190static char output_buffer[BUFMAX];
191static int initialized; /* !0 means we've been initialized */
192static int kgdb_started;
193static const char hexchars[]="0123456789abcdef";
194
195/* Used to prevent crashes in memory access. Note that they'll crash anyway if
196 we haven't set up fault handlers yet... */
197int kgdb_read_byte(unsigned char *address, unsigned char *dest);
198int kgdb_write_byte(unsigned char val, unsigned char *dest);
199
200/*
201 * Convert ch from a hex digit to an int
202 */
203static int hex(unsigned char ch)
204{
205 if (ch >= 'a' && ch <= 'f')
206 return ch-'a'+10;
207 if (ch >= '0' && ch <= '9')
208 return ch-'0';
209 if (ch >= 'A' && ch <= 'F')
210 return ch-'A'+10;
211 return -1;
212}
213
214/*
215 * scan for the sequence $<data>#<checksum>
216 */
217static void getpacket(char *buffer)
218{
219 unsigned char checksum;
220 unsigned char xmitcsum;
221 int i;
222 int count;
223 unsigned char ch;
224
225 do {
226 /*
227 * wait around for the start character,
228 * ignore all other characters
229 */
230 while ((ch = (getDebugChar() & 0x7f)) != '$') ;
231
232 checksum = 0;
233 xmitcsum = -1;
234 count = 0;
235
236 /*
237 * now, read until a # or end of buffer is found
238 */
239 while (count < BUFMAX) {
240 ch = getDebugChar();
241 if (ch == '#')
242 break;
243 checksum = checksum + ch;
244 buffer[count] = ch;
245 count = count + 1;
246 }
247
248 if (count >= BUFMAX)
249 continue;
250
251 buffer[count] = 0;
252
253 if (ch == '#') {
254 xmitcsum = hex(getDebugChar() & 0x7f) << 4;
255 xmitcsum |= hex(getDebugChar() & 0x7f);
256
257 if (checksum != xmitcsum)
258 putDebugChar('-'); /* failed checksum */
259 else {
260 putDebugChar('+'); /* successful transfer */
261
262 /*
263 * if a sequence char is present,
264 * reply the sequence ID
265 */
266 if (buffer[2] == ':') {
267 putDebugChar(buffer[0]);
268 putDebugChar(buffer[1]);
269
270 /*
271 * remove sequence chars from buffer
272 */
273 count = strlen(buffer);
274 for (i=3; i <= count; i++)
275 buffer[i-3] = buffer[i];
276 }
277 }
278 }
279 }
280 while (checksum != xmitcsum);
281}
282
283/*
284 * send the packet in buffer.
285 */
286static void putpacket(char *buffer)
287{
288 unsigned char checksum;
289 int count;
290 unsigned char ch;
291
292 /*
293 * $<packet info>#<checksum>.
294 */
295
296 do {
297 putDebugChar('$');
298 checksum = 0;
299 count = 0;
300
301 while ((ch = buffer[count]) != 0) {
302 if (!(putDebugChar(ch)))
303 return;
304 checksum += ch;
305 count += 1;
306 }
307
308 putDebugChar('#');
309 putDebugChar(hexchars[checksum >> 4]);
310 putDebugChar(hexchars[checksum & 0xf]);
311
312 }
313 while ((getDebugChar() & 0x7f) != '+');
314}
315
316
317/*
318 * Convert the memory pointed to by mem into hex, placing result in buf.
319 * Return a pointer to the last char put in buf (null), in case of mem fault,
320 * return 0.
321 * may_fault is non-zero if we are reading from arbitrary memory, but is currently
322 * not used.
323 */
324static unsigned char *mem2hex(char *mem, char *buf, int count, int may_fault)
325{
326 unsigned char ch;
327
328 while (count-- > 0) {
329 if (kgdb_read_byte(mem++, &ch) != 0)
330 return 0;
331 *buf++ = hexchars[ch >> 4];
332 *buf++ = hexchars[ch & 0xf];
333 }
334
335 *buf = 0;
336
337 return buf;
338}
339
340/*
341 * convert the hex array pointed to by buf into binary to be placed in mem
342 * return a pointer to the character AFTER the last byte written
343 * may_fault is non-zero if we are reading from arbitrary memory, but is currently
344 * not used.
345 */
346static char *hex2mem(char *buf, char *mem, int count, int binary, int may_fault)
347{
348 int i;
349 unsigned char ch;
350
351 for (i=0; i<count; i++)
352 {
353 if (binary) {
354 ch = *buf++;
355 if (ch == 0x7d)
356 ch = 0x20 ^ *buf++;
357 }
358 else {
359 ch = hex(*buf++) << 4;
360 ch |= hex(*buf++);
361 }
362 if (kgdb_write_byte(ch, mem++) != 0)
363 return 0;
364 }
365
366 return mem;
367}
368
369/*
370 * This table contains the mapping between SPARC hardware trap types, and
371 * signals, which are primarily what GDB understands. It also indicates
372 * which hardware traps we need to commandeer when initializing the stub.
373 */
374static struct hard_trap_info {
375 unsigned char tt; /* Trap type code for MIPS R3xxx and R4xxx */
376 unsigned char signo; /* Signal that we map this trap into */
377} hard_trap_info[] = {
378 { 6, SIGBUS }, /* instruction bus error */
379 { 7, SIGBUS }, /* data bus error */
380 { 9, SIGTRAP }, /* break */
381 { 10, SIGILL }, /* reserved instruction */
382/* { 11, SIGILL }, */ /* CPU unusable */
383 { 12, SIGFPE }, /* overflow */
384 { 13, SIGTRAP }, /* trap */
385 { 14, SIGSEGV }, /* virtual instruction cache coherency */
386 { 15, SIGFPE }, /* floating point exception */
387 { 23, SIGSEGV }, /* watch */
388 { 31, SIGSEGV }, /* virtual data cache coherency */
389 { 0, 0} /* Must be last */
390};
391
392/* Save the normal trap handlers for user-mode traps. */
393void *saved_vectors[32];
394
395/*
396 * Set up exception handlers for tracing and breakpoints
397 */
398void set_debug_traps(void)
399{
400 struct hard_trap_info *ht;
401 unsigned long flags;
402 unsigned char c;
403
404 local_irq_save(flags);
405 for (ht = hard_trap_info; ht->tt && ht->signo; ht++)
406 saved_vectors[ht->tt] = set_except_vector(ht->tt, trap_low);
407
408 putDebugChar('+'); /* 'hello world' */
409 /*
410 * In case GDB is started before us, ack any packets
411 * (presumably "$?#xx") sitting there.
412 */
413 while((c = getDebugChar()) != '$');
414 while((c = getDebugChar()) != '#');
415 c = getDebugChar(); /* eat first csum byte */
416 c = getDebugChar(); /* eat second csum byte */
417 putDebugChar('+'); /* ack it */
418
419 initialized = 1;
420 local_irq_restore(flags);
421}
422
423void restore_debug_traps(void)
424{
425 struct hard_trap_info *ht;
426 unsigned long flags;
427
428 local_irq_save(flags);
429 for (ht = hard_trap_info; ht->tt && ht->signo; ht++)
430 set_except_vector(ht->tt, saved_vectors[ht->tt]);
431 local_irq_restore(flags);
432}
433
434/*
435 * Convert the MIPS hardware trap type code to a Unix signal number.
436 */
437static int computeSignal(int tt)
438{
439 struct hard_trap_info *ht;
440
441 for (ht = hard_trap_info; ht->tt && ht->signo; ht++)
442 if (ht->tt == tt)
443 return ht->signo;
444
445 return SIGHUP; /* default for things we don't know about */
446}
447
448/*
449 * While we find nice hex chars, build an int.
450 * Return number of chars processed.
451 */
452static int hexToInt(char **ptr, int *intValue)
453{
454 int numChars = 0;
455 int hexValue;
456
457 *intValue = 0;
458
459 while (**ptr) {
460 hexValue = hex(**ptr);
461 if (hexValue < 0)
462 break;
463
464 *intValue = (*intValue << 4) | hexValue;
465 numChars ++;
466
467 (*ptr)++;
468 }
469
470 return (numChars);
471}
472
473static int hexToLong(char **ptr, long *longValue)
474{
475 int numChars = 0;
476 int hexValue;
477
478 *longValue = 0;
479
480 while (**ptr) {
481 hexValue = hex(**ptr);
482 if (hexValue < 0)
483 break;
484
485 *longValue = (*longValue << 4) | hexValue;
486 numChars ++;
487
488 (*ptr)++;
489 }
490
491 return numChars;
492}
493
494
495#if 0
496/*
497 * Print registers (on target console)
498 * Used only to debug the stub...
499 */
500void show_gdbregs(struct gdb_regs * regs)
501{
502 /*
503 * Saved main processor registers
504 */
505 printk("$0 : %08lx %08lx %08lx %08lx %08lx %08lx %08lx %08lx\n",
506 regs->reg0, regs->reg1, regs->reg2, regs->reg3,
507 regs->reg4, regs->reg5, regs->reg6, regs->reg7);
508 printk("$8 : %08lx %08lx %08lx %08lx %08lx %08lx %08lx %08lx\n",
509 regs->reg8, regs->reg9, regs->reg10, regs->reg11,
510 regs->reg12, regs->reg13, regs->reg14, regs->reg15);
511 printk("$16: %08lx %08lx %08lx %08lx %08lx %08lx %08lx %08lx\n",
512 regs->reg16, regs->reg17, regs->reg18, regs->reg19,
513 regs->reg20, regs->reg21, regs->reg22, regs->reg23);
514 printk("$24: %08lx %08lx %08lx %08lx %08lx %08lx %08lx %08lx\n",
515 regs->reg24, regs->reg25, regs->reg26, regs->reg27,
516 regs->reg28, regs->reg29, regs->reg30, regs->reg31);
517
518 /*
519 * Saved cp0 registers
520 */
521 printk("epc : %08lx\nStatus: %08lx\nCause : %08lx\n",
522 regs->cp0_epc, regs->cp0_status, regs->cp0_cause);
523}
524#endif /* dead code */
525
526/*
527 * We single-step by setting breakpoints. When an exception
528 * is handled, we need to restore the instructions hoisted
529 * when the breakpoints were set.
530 *
531 * This is where we save the original instructions.
532 */
533static struct gdb_bp_save {
534 unsigned long addr;
535 unsigned int val;
536} step_bp[2];
537
538#define BP 0x0000000d /* break opcode */
539
540/*
541 * Set breakpoint instructions for single stepping.
542 */
543static void single_step(struct gdb_regs *regs)
544{
545 union mips_instruction insn;
546 unsigned long targ;
547 int is_branch, is_cond, i;
548
549 targ = regs->cp0_epc;
550 insn.word = *(unsigned int *)targ;
551 is_branch = is_cond = 0;
552
553 switch (insn.i_format.opcode) {
554 /*
555 * jr and jalr are in r_format format.
556 */
557 case spec_op:
558 switch (insn.r_format.func) {
559 case jalr_op:
560 case jr_op:
561 targ = *(&regs->reg0 + insn.r_format.rs);
562 is_branch = 1;
563 break;
564 }
565 break;
566
567 /*
568 * This group contains:
569 * bltz_op, bgez_op, bltzl_op, bgezl_op,
570 * bltzal_op, bgezal_op, bltzall_op, bgezall_op.
571 */
572 case bcond_op:
573 is_branch = is_cond = 1;
574 targ += 4 + (insn.i_format.simmediate << 2);
575 break;
576
577 /*
578 * These are unconditional and in j_format.
579 */
580 case jal_op:
581 case j_op:
582 is_branch = 1;
583 targ += 4;
584 targ >>= 28;
585 targ <<= 28;
586 targ |= (insn.j_format.target << 2);
587 break;
588
589 /*
590 * These are conditional.
591 */
592 case beq_op:
593 case beql_op:
594 case bne_op:
595 case bnel_op:
596 case blez_op:
597 case blezl_op:
598 case bgtz_op:
599 case bgtzl_op:
600 case cop0_op:
601 case cop1_op:
602 case cop2_op:
603 case cop1x_op:
604 is_branch = is_cond = 1;
605 targ += 4 + (insn.i_format.simmediate << 2);
606 break;
607 }
608
609 if (is_branch) {
610 i = 0;
611 if (is_cond && targ != (regs->cp0_epc + 8)) {
612 step_bp[i].addr = regs->cp0_epc + 8;
613 step_bp[i++].val = *(unsigned *)(regs->cp0_epc + 8);
614 *(unsigned *)(regs->cp0_epc + 8) = BP;
615 }
616 step_bp[i].addr = targ;
617 step_bp[i].val = *(unsigned *)targ;
618 *(unsigned *)targ = BP;
619 } else {
620 step_bp[0].addr = regs->cp0_epc + 4;
621 step_bp[0].val = *(unsigned *)(regs->cp0_epc + 4);
622 *(unsigned *)(regs->cp0_epc + 4) = BP;
623 }
624}
625
626/*
627 * If asynchronously interrupted by gdb, then we need to set a breakpoint
628 * at the interrupted instruction so that we wind up stopped with a
629 * reasonable stack frame.
630 */
631static struct gdb_bp_save async_bp;
632
633/*
634 * Swap the interrupted EPC with our asynchronous breakpoint routine.
635 * This is safer than stuffing the breakpoint in-place, since no cache
636 * flushes (or resulting smp_call_functions) are required. The
637 * assumption is that only one CPU will be handling asynchronous bp's,
638 * and only one can be active at a time.
639 */
640extern spinlock_t smp_call_lock;
641
642void set_async_breakpoint(unsigned long *epc)
643{
644 /* skip breaking into userland */
645 if ((*epc & 0x80000000) == 0)
646 return;
647
648#ifdef CONFIG_SMP
649 /* avoid deadlock if someone is make IPC */
650 if (spin_is_locked(&smp_call_lock))
651 return;
652#endif
653
654 async_bp.addr = *epc;
655 *epc = (unsigned long)async_breakpoint;
656}
657
658#ifdef CONFIG_SMP
659static void kgdb_wait(void *arg)
660{
661 unsigned flags;
662 int cpu = smp_processor_id();
663
664 local_irq_save(flags);
665
666 __raw_spin_lock(&kgdb_cpulock[cpu]);
667 __raw_spin_unlock(&kgdb_cpulock[cpu]);
668
669 local_irq_restore(flags);
670}
671#endif
672
673/*
674 * GDB stub needs to call kgdb_wait on all processor with interrupts
675 * disabled, so it uses it's own special variant.
676 */
677static int kgdb_smp_call_kgdb_wait(void)
678{
679#ifdef CONFIG_SMP
680 cpumask_t mask = cpu_online_map;
681 struct call_data_struct data;
682 int cpu = smp_processor_id();
683 int cpus;
684
685 /*
686 * Can die spectacularly if this CPU isn't yet marked online
687 */
688 BUG_ON(!cpu_online(cpu));
689
690 cpu_clear(cpu, mask);
691 cpus = cpus_weight(mask);
692 if (!cpus)
693 return 0;
694
695 if (spin_is_locked(&smp_call_lock)) {
696 /*
697 * Some other processor is trying to make us do something
698 * but we're not going to respond... give up
699 */
700 return -1;
701 }
702
703 /*
704 * We will continue here, accepting the fact that
705 * the kernel may deadlock if another CPU attempts
706 * to call smp_call_function now...
707 */
708
709 data.func = kgdb_wait;
710 data.info = NULL;
711 atomic_set(&data.started, 0);
712 data.wait = 0;
713
714 spin_lock(&smp_call_lock);
715 call_data = &data;
716 mb();
717
718 core_send_ipi_mask(mask, SMP_CALL_FUNCTION);
719
720 /* Wait for response */
721 /* FIXME: lock-up detection, backtrace on lock-up */
722 while (atomic_read(&data.started) != cpus)
723 barrier();
724
725 call_data = NULL;
726 spin_unlock(&smp_call_lock);
727#endif
728
729 return 0;
730}
731
732/*
733 * This function does all command processing for interfacing to gdb. It
734 * returns 1 if you should skip the instruction at the trap address, 0
735 * otherwise.
736 */
737void handle_exception(struct gdb_regs *regs)
738{
739 int trap; /* Trap type */
740 int sigval;
741 long addr;
742 int length;
743 char *ptr;
744 unsigned long *stack;
745 int i;
746 int bflag = 0;
747
748 kgdb_started = 1;
749
750 /*
751 * acquire the big kgdb spinlock
752 */
753 if (!spin_trylock(&kgdb_lock)) {
754 /*
755 * some other CPU has the lock, we should go back to
756 * receive the gdb_wait IPC
757 */
758 return;
759 }
760
761 /*
762 * If we're in async_breakpoint(), restore the real EPC from
763 * the breakpoint.
764 */
765 if (regs->cp0_epc == (unsigned long)async_breakinst) {
766 regs->cp0_epc = async_bp.addr;
767 async_bp.addr = 0;
768 }
769
770 /*
771 * acquire the CPU spinlocks
772 */
773 for_each_online_cpu(i)
774 if (__raw_spin_trylock(&kgdb_cpulock[i]) == 0)
775 panic("kgdb: couldn't get cpulock %d\n", i);
776
777 /*
778 * force other cpus to enter kgdb
779 */
780 kgdb_smp_call_kgdb_wait();
781
782 /*
783 * If we're in breakpoint() increment the PC
784 */
785 trap = (regs->cp0_cause & 0x7c) >> 2;
786 if (trap == 9 && regs->cp0_epc == (unsigned long)breakinst)
787 regs->cp0_epc += 4;
788
789 /*
790 * If we were single_stepping, restore the opcodes hoisted
791 * for the breakpoint[s].
792 */
793 if (step_bp[0].addr) {
794 *(unsigned *)step_bp[0].addr = step_bp[0].val;
795 step_bp[0].addr = 0;
796
797 if (step_bp[1].addr) {
798 *(unsigned *)step_bp[1].addr = step_bp[1].val;
799 step_bp[1].addr = 0;
800 }
801 }
802
803 stack = (long *)regs->reg29; /* stack ptr */
804 sigval = computeSignal(trap);
805
806 /*
807 * reply to host that an exception has occurred
808 */
809 ptr = output_buffer;
810
811 /*
812 * Send trap type (converted to signal)
813 */
814 *ptr++ = 'T';
815 *ptr++ = hexchars[sigval >> 4];
816 *ptr++ = hexchars[sigval & 0xf];
817
818 /*
819 * Send Error PC
820 */
821 *ptr++ = hexchars[REG_EPC >> 4];
822 *ptr++ = hexchars[REG_EPC & 0xf];
823 *ptr++ = ':';
824 ptr = mem2hex((char *)&regs->cp0_epc, ptr, sizeof(long), 0);
825 *ptr++ = ';';
826
827 /*
828 * Send frame pointer
829 */
830 *ptr++ = hexchars[REG_FP >> 4];
831 *ptr++ = hexchars[REG_FP & 0xf];
832 *ptr++ = ':';
833 ptr = mem2hex((char *)&regs->reg30, ptr, sizeof(long), 0);
834 *ptr++ = ';';
835
836 /*
837 * Send stack pointer
838 */
839 *ptr++ = hexchars[REG_SP >> 4];
840 *ptr++ = hexchars[REG_SP & 0xf];
841 *ptr++ = ':';
842 ptr = mem2hex((char *)&regs->reg29, ptr, sizeof(long), 0);
843 *ptr++ = ';';
844
845 *ptr++ = 0;
846 putpacket(output_buffer); /* send it off... */
847
848 /*
849 * Wait for input from remote GDB
850 */
851 while (1) {
852 output_buffer[0] = 0;
853 getpacket(input_buffer);
854
855 switch (input_buffer[0])
856 {
857 case '?':
858 output_buffer[0] = 'S';
859 output_buffer[1] = hexchars[sigval >> 4];
860 output_buffer[2] = hexchars[sigval & 0xf];
861 output_buffer[3] = 0;
862 break;
863
864 /*
865 * Detach debugger; let CPU run
866 */
867 case 'D':
868 putpacket(output_buffer);
869 goto finish_kgdb;
870 break;
871
872 case 'd':
873 /* toggle debug flag */
874 break;
875
876 /*
877 * Return the value of the CPU registers
878 */
879 case 'g':
880 ptr = output_buffer;
881 ptr = mem2hex((char *)&regs->reg0, ptr, 32*sizeof(long), 0); /* r0...r31 */
882 ptr = mem2hex((char *)&regs->cp0_status, ptr, 6*sizeof(long), 0); /* cp0 */
883 ptr = mem2hex((char *)&regs->fpr0, ptr, 32*sizeof(long), 0); /* f0...31 */
884 ptr = mem2hex((char *)&regs->cp1_fsr, ptr, 2*sizeof(long), 0); /* cp1 */
885 ptr = mem2hex((char *)&regs->frame_ptr, ptr, 2*sizeof(long), 0); /* frp */
886 ptr = mem2hex((char *)&regs->cp0_index, ptr, 16*sizeof(long), 0); /* cp0 */
887 break;
888
889 /*
890 * set the value of the CPU registers - return OK
891 */
892 case 'G':
893 {
894 ptr = &input_buffer[1];
895 hex2mem(ptr, (char *)&regs->reg0, 32*sizeof(long), 0, 0);
896 ptr += 32*(2*sizeof(long));
897 hex2mem(ptr, (char *)&regs->cp0_status, 6*sizeof(long), 0, 0);
898 ptr += 6*(2*sizeof(long));
899 hex2mem(ptr, (char *)&regs->fpr0, 32*sizeof(long), 0, 0);
900 ptr += 32*(2*sizeof(long));
901 hex2mem(ptr, (char *)&regs->cp1_fsr, 2*sizeof(long), 0, 0);
902 ptr += 2*(2*sizeof(long));
903 hex2mem(ptr, (char *)&regs->frame_ptr, 2*sizeof(long), 0, 0);
904 ptr += 2*(2*sizeof(long));
905 hex2mem(ptr, (char *)&regs->cp0_index, 16*sizeof(long), 0, 0);
906 strcpy(output_buffer, "OK");
907 }
908 break;
909
910 /*
911 * mAA..AA,LLLL Read LLLL bytes at address AA..AA
912 */
913 case 'm':
914 ptr = &input_buffer[1];
915
916 if (hexToLong(&ptr, &addr)
917 && *ptr++ == ','
918 && hexToInt(&ptr, &length)) {
919 if (mem2hex((char *)addr, output_buffer, length, 1))
920 break;
921 strcpy(output_buffer, "E03");
922 } else
923 strcpy(output_buffer, "E01");
924 break;
925
926 /*
927 * XAA..AA,LLLL: Write LLLL escaped binary bytes at address AA.AA
928 */
929 case 'X':
930 bflag = 1;
931 /* fall through */
932
933 /*
934 * MAA..AA,LLLL: Write LLLL bytes at address AA.AA return OK
935 */
936 case 'M':
937 ptr = &input_buffer[1];
938
939 if (hexToLong(&ptr, &addr)
940 && *ptr++ == ','
941 && hexToInt(&ptr, &length)
942 && *ptr++ == ':') {
943 if (hex2mem(ptr, (char *)addr, length, bflag, 1))
944 strcpy(output_buffer, "OK");
945 else
946 strcpy(output_buffer, "E03");
947 }
948 else
949 strcpy(output_buffer, "E02");
950 break;
951
952 /*
953 * cAA..AA Continue at address AA..AA(optional)
954 */
955 case 'c':
956 /* try to read optional parameter, pc unchanged if no parm */
957
958 ptr = &input_buffer[1];
959 if (hexToLong(&ptr, &addr))
960 regs->cp0_epc = addr;
961
962 goto exit_kgdb_exception;
963 break;
964
965 /*
966 * kill the program; let us try to restart the machine
967 * Reset the whole machine.
968 */
969 case 'k':
970 case 'r':
971 machine_restart("kgdb restarts machine");
972 break;
973
974 /*
975 * Step to next instruction
976 */
977 case 's':
978 /*
979 * There is no single step insn in the MIPS ISA, so we
980 * use breakpoints and continue, instead.
981 */
982 single_step(regs);
983 goto exit_kgdb_exception;
984 /* NOTREACHED */
985 break;
986
987 /*
988 * Set baud rate (bBB)
989 * FIXME: Needs to be written
990 */
991 case 'b':
992 {
993#if 0
994 int baudrate;
995 extern void set_timer_3();
996
997 ptr = &input_buffer[1];
998 if (!hexToInt(&ptr, &baudrate))
999 {
1000 strcpy(output_buffer, "B01");
1001 break;
1002 }
1003
1004 /* Convert baud rate to uart clock divider */
1005
1006 switch (baudrate)
1007 {
1008 case 38400:
1009 baudrate = 16;
1010 break;
1011 case 19200:
1012 baudrate = 33;
1013 break;
1014 case 9600:
1015 baudrate = 65;
1016 break;
1017 default:
1018 baudrate = 0;
1019 strcpy(output_buffer, "B02");
1020 goto x1;
1021 }
1022
1023 if (baudrate) {
1024 putpacket("OK"); /* Ack before changing speed */
1025 set_timer_3(baudrate); /* Set it */
1026 }
1027#endif
1028 }
1029 break;
1030
1031 } /* switch */
1032
1033 /*
1034 * reply to the request
1035 */
1036
1037 putpacket(output_buffer);
1038
1039 } /* while */
1040
1041 return;
1042
1043finish_kgdb:
1044 restore_debug_traps();
1045
1046exit_kgdb_exception:
1047 /* release locks so other CPUs can go */
1048 for_each_online_cpu(i)
1049 __raw_spin_unlock(&kgdb_cpulock[i]);
1050 spin_unlock(&kgdb_lock);
1051
1052 __flush_cache_all();
1053 return;
1054}
1055
1056/*
1057 * This function will generate a breakpoint exception. It is used at the
1058 * beginning of a program to sync up with a debugger and can be used
1059 * otherwise as a quick means to stop program execution and "break" into
1060 * the debugger.
1061 */
1062void breakpoint(void)
1063{
1064 if (!initialized)
1065 return;
1066
1067 __asm__ __volatile__(
1068 ".globl breakinst\n\t"
1069 ".set\tnoreorder\n\t"
1070 "nop\n"
1071 "breakinst:\tbreak\n\t"
1072 "nop\n\t"
1073 ".set\treorder"
1074 );
1075}
1076
1077/* Nothing but the break; don't pollute any registers */
1078void async_breakpoint(void)
1079{
1080 __asm__ __volatile__(
1081 ".globl async_breakinst\n\t"
1082 ".set\tnoreorder\n\t"
1083 "nop\n"
1084 "async_breakinst:\tbreak\n\t"
1085 "nop\n\t"
1086 ".set\treorder"
1087 );
1088}
1089
1090void adel(void)
1091{
1092 __asm__ __volatile__(
1093 ".globl\tadel\n\t"
1094 "lui\t$8,0x8000\n\t"
1095 "lw\t$9,1($8)\n\t"
1096 );
1097}
1098
1099/*
1100 * malloc is needed by gdb client in "call func()", even a private one
1101 * will make gdb happy
1102 */
1103static void __used *malloc(size_t size)
1104{
1105 return kmalloc(size, GFP_ATOMIC);
1106}
1107
1108static void __used free(void *where)
1109{
1110 kfree(where);
1111}
1112
1113#ifdef CONFIG_GDB_CONSOLE
1114
1115void gdb_putsn(const char *str, int l)
1116{
1117 char outbuf[18];
1118
1119 if (!kgdb_started)
1120 return;
1121
1122 outbuf[0]='O';
1123
1124 while(l) {
1125 int i = (l>8)?8:l;
1126 mem2hex((char *)str, &outbuf[1], i, 0);
1127 outbuf[(i*2)+1]=0;
1128 putpacket(outbuf);
1129 str += i;
1130 l -= i;
1131 }
1132}
1133
1134static void gdb_console_write(struct console *con, const char *s, unsigned n)
1135{
1136 gdb_putsn(s, n);
1137}
1138
1139static struct console gdb_console = {
1140 .name = "gdb",
1141 .write = gdb_console_write,
1142 .flags = CON_PRINTBUFFER,
1143 .index = -1
1144};
1145
1146static int __init register_gdb_console(void)
1147{
1148 register_console(&gdb_console);
1149
1150 return 0;
1151}
1152
1153console_initcall(register_gdb_console);
1154
1155#endif
diff --git a/arch/mips/kernel/irq.c b/arch/mips/kernel/irq.c
index 6045b9a51a35..8acba0880d9f 100644
--- a/arch/mips/kernel/irq.c
+++ b/arch/mips/kernel/irq.c
@@ -126,19 +126,6 @@ asmlinkage void spurious_interrupt(void)
126 atomic_inc(&irq_err_count); 126 atomic_inc(&irq_err_count);
127} 127}
128 128
129#ifdef CONFIG_KGDB
130extern void breakpoint(void);
131extern void set_debug_traps(void);
132
133static int kgdb_flag = 1;
134static int __init nokgdb(char *str)
135{
136 kgdb_flag = 0;
137 return 1;
138}
139__setup("nokgdb", nokgdb);
140#endif
141
142void __init init_IRQ(void) 129void __init init_IRQ(void)
143{ 130{
144 int i; 131 int i;
@@ -147,12 +134,4 @@ void __init init_IRQ(void)
147 set_irq_noprobe(i); 134 set_irq_noprobe(i);
148 135
149 arch_init_irq(); 136 arch_init_irq();
150
151#ifdef CONFIG_KGDB
152 if (kgdb_flag) {
153 printk("Wait for gdb client connection ...\n");
154 set_debug_traps();
155 breakpoint();
156 }
157#endif
158} 137}
generated by cgit v1.2.2 (git 2.25.0) at 2025-02-18 07:08:53 -0500