Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 282 insertions, 0 deletions

diff --git a/arch/mips/jazz/int-handler.S b/arch/mips/jazz/int-handler.S
new file mode 100644
index 000000000000..4dbcf91db884
--- /dev/null
+++ b/arch/mips/jazz/int-handler.S
@@ -0,0 +1,282 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995, 1996, 1997, 1998 by Ralf Baechle and Andreas Busse
+ *
+ * Jazz family specific interrupt stuff
+ *
+ * To do: On Jazz machines we remap some non-ISA interrupts to ISA
+ *        interrupts.  These interrupts should use their own vectors.
+ *        Squeeze the last cycles out of the handlers.  Only a dead
+ *        cycle is a good cycle.
+ */
+#include <asm/asm.h>
+#include <asm/mipsregs.h>
+#include <asm/jazz.h>
+#include <asm/regdef.h>
+#include <asm/stackframe.h>
+
+/*
+ * jazz_handle_int: Interrupt handler for the ACER Pica-61 boards
+ */
+                .set    noreorder
+
+                NESTED(jazz_handle_int, PT_SIZE, ra)
+                .set    noat
+                SAVE_ALL
+                CLI
+                .set    at
+
+                /*
+                 * Get pending interrupts
+                 */
+                mfc0    t0,CP0_CAUSE            # get pending interrupts
+                mfc0    t1,CP0_STATUS           # get enabled interrupts
+                and     t0,t1                   # isolate allowed ones
+                andi    t0,0xff00               # isolate pending bits
+                beqz    t0,3f
+                sll     t0,16                   # delay slot
+
+                /*
+                 * Find irq with highest priority
+                 * FIXME: This is slow - use binary search
+                 */
+                la      t1,ll_vectors
+1:              bltz    t0,2f                   # found pending irq
+                sll     t0,1
+                b       1b
+                subu    t1,PTRSIZE              # delay slot
+
+                /*
+                 * Do the low-level stuff
+                 */
+2:              lw      t0,(t1)
+                jr      t0
+                nop                             # delay slot
+                END(jazz_handle_int)
+
+ll_sw0:         li      s1,~IE_SW0
+                mfc0    t0,CP0_CAUSE
+                and     t0,s1
+                mtc0    t0,CP0_CAUSE
+                PANIC("Unimplemented sw0 handler")
+
+ll_sw1:         li      s1,~IE_SW1
+                mfc0    t0,CP0_CAUSE
+                and     t0,s1
+                mtc0    t0,CP0_CAUSE
+                PANIC("Unimplemented sw1 handler")
+
+ll_local_dma:   li      s1,~IE_IRQ0
+                PANIC("Unimplemented local_dma handler")
+
+ll_local_dev:   lbu     t0,JAZZ_IO_IRQ_SOURCE
+#if PTRSIZE == 8        /* True 64 bit kernel */
+                dsll    t0,1
+#endif
+                .set    reorder
+                LONG_L  t0,local_vector(t0)
+                jr      t0
+                .set    noreorder
+
+/*
+ * The braindead PICA hardware gives us no way to distinguish if we really
+ * received interrupt 7 from the (E)ISA bus or if we just received an
+ * interrupt with no findable cause.  This sometimes happens with braindead
+ * cards.  Oh well - for all the Jazz boxes slots are more or less just
+ * whistles and bells and we're aware of the problem.
+ */
+ll_isa_irq:     lw      a0, JAZZ_EISA_IRQ_ACK
+
+                jal     do_IRQ
+                 move   a1,sp
+
+                j       ret_from_irq
+                nop
+
+/*
+ * Hmm...  This is not just a plain PC clone so the question is
+ * which devices on Jazz machines can generate an (E)ISA NMI?
+ * (Writing to nonexistent memory?)
+ */
+ll_isa_nmi:     li      s1,~IE_IRQ3
+                PANIC("Unimplemented isa_nmi handler")
+
+/*
+ * Timer IRQ - remapped to be more similar to an IBM compatible.
+ *
+ * The timer interrupt is handled specially to ensure that the jiffies
+ * variable is updated at all times.  Specifically, the timer interrupt is
+ * just like the complete handlers except that it is invoked with interrupts
+ * disabled and should never re-enable them.  If other interrupts were
+ * allowed to be processed while the timer interrupt is active, then the
+ * other interrupts would have to avoid using the jiffies variable for delay
+ * and interval timing operations to avoid hanging the system.
+ */
+ll_timer:       lw      zero,JAZZ_TIMER_REGISTER # timer irq cleared on read
+                li      s1,~IE_IRQ4
+
+                li      a0, JAZZ_TIMER_IRQ
+                jal     do_IRQ
+                 move   a1,sp
+
+                mfc0    t0,CP0_STATUS           # disable interrupts again
+                ori     t0,1
+                xori    t0,1
+                mtc0    t0,CP0_STATUS
+
+                j       ret_from_irq
+                 nop
+
+/*
+ * CPU count/compare IRQ (unused)
+ */
+ll_count:       j       ret_from_irq
+                 mtc0   zero,CP0_COMPARE
+
+#if 0
+/*
+ * Call the handler for the interrupt
+ * (Currently unused)
+ */
+call_real:      /*
+                 * temporarily disable interrupt
+                 */
+                mfc0    t2,CP0_STATUS
+                and     t2,s1
+                mtc0    t2,CP0_STATUS
+                nor     s1,zero,s1
+                jal     do_IRQ
+
+                /*
+                 * reenable interrupt
+                 */
+                mfc0    t2,CP0_STATUS
+                or      t2,s1
+                mtc0    t2,CP0_STATUS
+                j       ret_from_irq
+#endif
+
+                .data
+                PTR     ll_sw0                  # SW0
+                PTR     ll_sw1                  # SW1
+                PTR     ll_local_dma            # Local DMA
+                PTR     ll_local_dev            # Local devices
+                PTR     ll_isa_irq              # ISA IRQ
+                PTR     ll_isa_nmi              # ISA NMI
+                PTR     ll_timer                # Timer
+ll_vectors:     PTR     ll_count                # Count/Compare IRQ
+
+                /*
+                 * Interrupt handlers for local devices.
+                 */
+                .text
+                .set    reorder
+loc_no_irq:     PANIC("Unimplemented loc_no_irq handler")
+/*
+ * Parallel port IRQ
+ */
+loc_parallel:   li      s1,~JAZZ_IE_PARALLEL
+                li      a0,JAZZ_PARALLEL_IRQ
+                b       loc_call
+
+/*
+ * Floppy IRQ
+ */
+loc_floppy:     li      s1,~JAZZ_IE_FLOPPY
+                li      a0,JAZZ_FLOPPY_IRQ
+                b       loc_call
+
+/*
+ * Sound IRQ
+ */
+loc_sound:      PANIC("Unimplemented loc_sound handler")
+loc_video:      PANIC("Unimplemented loc_video handler")
+
+/*
+ * Ethernet interrupt handler
+ */
+loc_ethernet:   li      s1,~JAZZ_IE_ETHERNET
+                li      a0,JAZZ_ETHERNET_IRQ
+                b       loc_call
+
+/*
+ * SCSI interrupt handler
+ */
+loc_scsi:       li      s1,~JAZZ_IE_SCSI
+                li      a0,JAZZ_SCSI_IRQ
+                b       loc_call
+
+/*
+ * Keyboard interrupt handler
+ */
+loc_keyboard:   li      s1,~JAZZ_IE_KEYBOARD
+                li      a0,JAZZ_KEYBOARD_IRQ
+                b       loc_call
+
+/*
+ * Mouse interrupt handler
+ */
+loc_mouse:      li      s1,~JAZZ_IE_MOUSE
+                li      a0,JAZZ_MOUSE_IRQ
+                b       loc_call
+
+/*
+ * Serial port 1 IRQ
+ */
+loc_serial1:    li      s1,~JAZZ_IE_SERIAL1
+                li      a0,JAZZ_SERIAL1_IRQ
+                b       loc_call
+
+/*
+ * Serial port 2 IRQ
+ */
+loc_serial2:    li      s1,~JAZZ_IE_SERIAL2
+                li      a0,JAZZ_SERIAL2_IRQ
+                b       loc_call
+
+/*
+ * Call the interrupt handler for an interrupt generated by a
+ * local device.
+ */
+loc_call:       /*
+                 * Temporarily disable interrupt source
+                 */
+                lhu     t2,JAZZ_IO_IRQ_ENABLE
+                and     t2,s1
+                sh      t2,JAZZ_IO_IRQ_ENABLE
+
+                nor     s1,zero,s1
+                jal     do_IRQ
+
+                /*
+                 * Reenable interrupt
+                 */
+                lhu     t2,JAZZ_IO_IRQ_ENABLE
+                or      t2,s1
+                sh      t2,JAZZ_IO_IRQ_ENABLE
+
+                j       ret_from_irq
+
+/*
+ * "Jump extender" to reach spurious_interrupt
+ */
+3:              j       spurious_interrupt
+
+/*
+ * Vectors for interrupts generated by local devices
+ */
+                .data
+local_vector:   PTR     loc_no_irq
+                PTR     loc_parallel
+                PTR     loc_floppy
+                PTR     loc_sound
+                PTR     loc_video
+                PTR     loc_ethernet
+                PTR     loc_scsi
+                PTR     loc_keyboard
+                PTR     loc_mouse
+                PTR     loc_serial1
+                PTR     loc_serial2