[MIPS] Rewrite GALILEO_INL/GALILEO_OUTL to GT_READ/GT_WRITE

This patch has rewritten GALILEO_INL/GALILEO_OUTL using GT_READ/GT_WRITE.
This patch tested on Cobalt Qube2.

Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

1 files changed, 8 insertions, 8 deletions

diff --git a/arch/mips/cobalt/setup.c b/arch/mips/cobalt/setup.c
index bf9dc72b9720..e8f0f20b852d 100644
--- a/arch/mips/cobalt/setup.c
+++ b/arch/mips/cobalt/setup.c
@@ -51,23 +51,23 @@ const char *get_system_type(void)
 void __init plat_timer_setup(struct irqaction *irq)
 {
         /* Load timer value for HZ (TCLK is 50MHz) */
-        GALILEO_OUTL(50*1000*1000 / HZ, GT_TC0_OFS);
+        GT_WRITE(GT_TC0_OFS, 50*1000*1000 / HZ);
 
         /* Enable timer */
-        GALILEO_OUTL(GALILEO_ENTC0 | GALILEO_SELTC0, GT_TC_CONTROL_OFS);
+        GT_WRITE(GT_TC_CONTROL_OFS, GT_TC_CONTROL_ENTC0_MSK | GT_TC_CONTROL_SELTC0_MSK);
 
         /* Register interrupt */
         setup_irq(COBALT_GALILEO_IRQ, irq);
 
         /* Enable interrupt */
-        GALILEO_OUTL(GALILEO_INTR_T0EXP | GALILEO_INL(GT_INTRMASK_OFS), GT_INTRMASK_OFS);
+        GT_WRITE(GT_INTRMASK_OFS, GT_INTR_T0EXP_MSK | GT_READ(GT_INTRMASK_OFS));
 }
 
 extern struct pci_ops gt64111_pci_ops;
 
 static struct resource cobalt_mem_resource = {
-        .start  = GT64111_MEM_BASE,
-        .end    = GT64111_MEM_END,
+        .start  = GT_DEF_PCI0_MEM0_BASE,
+        .end    = GT_DEF_PCI0_MEM0_BASE + GT_DEF_PCI0_MEM0_SIZE - 1,
         .name   = "PCI memory",
         .flags  = IORESOURCE_MEM
 };
@@ -115,7 +115,7 @@ static struct pci_controller cobalt_pci_controller = {
         .mem_resource   = &cobalt_mem_resource,
         .mem_offset     = 0,
         .io_resource    = &cobalt_io_resource,
-        .io_offset      = 0 - GT64111_IO_BASE
+        .io_offset      = 0 - GT_DEF_PCI0_IO_BASE,
 };
 
 void __init plat_mem_setup(void)
@@ -128,7 +128,7 @@ void __init plat_mem_setup(void)
         _machine_halt = cobalt_machine_halt;
         pm_power_off = cobalt_machine_power_off;
 
-        set_io_port_base(CKSEG1ADDR(GT64111_IO_BASE));
+        set_io_port_base(CKSEG1ADDR(GT_DEF_PCI0_IO_BASE));
 
         /* I/O port resource must include UART and LCD/buttons */
         ioport_resource.end = 0x0fffffff;
@@ -139,7 +139,7 @@ void __init plat_mem_setup(void)
 
         /* Read the cobalt id register out of the PCI config space */
         PCI_CFG_SET(devfn, (VIA_COBALT_BRD_ID_REG & ~0x3));
-        cobalt_board_id = GALILEO_INL(GT_PCI0_CFGDATA_OFS);
+        cobalt_board_id = GT_READ(GT_PCI0_CFGDATA_OFS);
         cobalt_board_id >>= ((VIA_COBALT_BRD_ID_REG & 3) * 8);
         cobalt_board_id = VIA_COBALT_BRD_REG_to_ID(cobalt_board_id);