MIPS: Octeon: Rearrange CVMX files in preperation for device tree

Signed-off-by: David Daney <david.daney@cavium.com>
Cc: linux-mips@linux-mips.org
Cc: netdev@vger.kernel.org
Cc: devel@driverdev.osuosl.org
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Patchwork: https://patchwork.linux-mips.org/patch/2941/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

4 files changed, 107 insertions, 24 deletions

diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper-sgmii.c b/arch/mips/cavium-octeon/executive/cvmx-helper-sgmii.c
index 464347ffd362..0c0bf5d30e70 100644
--- a/arch/mips/cavium-octeon/executive/cvmx-helper-sgmii.c
+++ b/arch/mips/cavium-octeon/executive/cvmx-helper-sgmii.c
@@ -326,6 +326,10 @@ static int __cvmx_helper_sgmii_hardware_init(int interface, int num_ports)
         return 0;
 }
 
+int __cvmx_helper_sgmii_enumerate(int interface)
+{
+        return 4;
+}
 /**
  * Probe a SGMII interface and determine the number of ports
  * connected to it. The SGMII interface should still be down after
@@ -347,7 +351,7 @@ int __cvmx_helper_sgmii_probe(int interface)
         mode.u64 = cvmx_read_csr(CVMX_GMXX_INF_MODE(interface));
         mode.s.en = 1;
         cvmx_write_csr(CVMX_GMXX_INF_MODE(interface), mode.u64);
-        return 4;
+        return __cvmx_helper_sgmii_enumerate(interface);
 }
 
 /**
diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper-spi.c b/arch/mips/cavium-octeon/executive/cvmx-helper-spi.c
index 02a444230ef7..2830e4bdf7f3 100644
--- a/arch/mips/cavium-octeon/executive/cvmx-helper-spi.c
+++ b/arch/mips/cavium-octeon/executive/cvmx-helper-spi.c
@@ -51,6 +51,16 @@ void __cvmx_interrupt_stxx_int_msk_enable(int index);
 #define CVMX_HELPER_SPI_TIMEOUT 10
 #endif
 
+int __cvmx_helper_spi_enumerate(int interface)
+{
+        if ((cvmx_sysinfo_get()->board_type != CVMX_BOARD_TYPE_SIM) &&
+            cvmx_spi4000_is_present(interface)) {
+                return 10;
+        } else {
+                return 16;
+        }
+}
+
 /**
  * Probe a SPI interface and determine the number of ports
  * connected to it. The SPI interface should still be down after
diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper-xaui.c b/arch/mips/cavium-octeon/executive/cvmx-helper-xaui.c
index 667a8e3cb142..1723248e987d 100644
--- a/arch/mips/cavium-octeon/executive/cvmx-helper-xaui.c
+++ b/arch/mips/cavium-octeon/executive/cvmx-helper-xaui.c
@@ -44,6 +44,19 @@
 void __cvmx_interrupt_gmxx_enable(int interface);
 void __cvmx_interrupt_pcsx_intx_en_reg_enable(int index, int block);
 void __cvmx_interrupt_pcsxx_int_en_reg_enable(int index);
+
+int __cvmx_helper_xaui_enumerate(int interface)
+{
+        union cvmx_gmxx_hg2_control gmx_hg2_control;
+
+        /* If HiGig2 is enabled return 16 ports, otherwise return 1 port */
+        gmx_hg2_control.u64 = cvmx_read_csr(CVMX_GMXX_HG2_CONTROL(interface));
+        if (gmx_hg2_control.s.hg2tx_en)
+                return 16;
+        else
+                return 1;
+}
+
 /**
  * Probe a XAUI interface and determine the number of ports
  * connected to it. The XAUI interface should still be down
@@ -56,7 +69,6 @@ void __cvmx_interrupt_pcsxx_int_en_reg_enable(int index);
 int __cvmx_helper_xaui_probe(int interface)
 {
         int i;
-        union cvmx_gmxx_hg2_control gmx_hg2_control;
         union cvmx_gmxx_inf_mode mode;
 
         /*
@@ -90,13 +102,7 @@ int __cvmx_helper_xaui_probe(int interface)
                 pko_mem_port_ptrs.s.pid = interface * 16 + i;
                 cvmx_write_csr(CVMX_PKO_MEM_PORT_PTRS, pko_mem_port_ptrs.u64);
         }
-
-        /* If HiGig2 is enabled return 16 ports, otherwise return 1 port */
-        gmx_hg2_control.u64 = cvmx_read_csr(CVMX_GMXX_HG2_CONTROL(interface));
-        if (gmx_hg2_control.s.hg2tx_en)
-                return 16;
-        else
-                return 1;
+        return __cvmx_helper_xaui_enumerate(interface);
 }
 
 /**
diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper.c b/arch/mips/cavium-octeon/executive/cvmx-helper.c
index daa8c8bbcfe4..fa4963856353 100644
--- a/arch/mips/cavium-octeon/executive/cvmx-helper.c
+++ b/arch/mips/cavium-octeon/executive/cvmx-helper.c
@@ -234,21 +234,16 @@ static int __cvmx_helper_port_setup_ipd(int ipd_port)
 }
 
 /**
- * This function probes an interface to determine the actual
- * number of hardware ports connected to it. It doesn't setup the
- * ports or enable them. The main goal here is to set the global
- * interface_port_count[interface] correctly. Hardware setup of the
- * ports will be performed later.
+ * This function sets the interface_port_count[interface] correctly,
+ * without modifying any hardware configuration.  Hardware setup of
+ * the ports will be performed later.
  *
  * @interface: Interface to probe
  *
  * Returns Zero on success, negative on failure
  */
-int cvmx_helper_interface_probe(int interface)
+int cvmx_helper_interface_enumerate(int interface)
 {
-        /* At this stage in the game we don't want packets to be moving yet.
-           The following probe calls should perform hardware setup
-           needed to determine port counts. Receive must still be disabled */
         switch (cvmx_helper_interface_get_mode(interface)) {
                 /* These types don't support ports to IPD/PKO */
         case CVMX_HELPER_INTERFACE_MODE_DISABLED:
@@ -258,7 +253,7 @@ int cvmx_helper_interface_probe(int interface)
                 /* XAUI is a single high speed port */
         case CVMX_HELPER_INTERFACE_MODE_XAUI:
                 interface_port_count[interface] =
-                    __cvmx_helper_xaui_probe(interface);
+                    __cvmx_helper_xaui_enumerate(interface);
                 break;
                 /*
                  * RGMII/GMII/MII are all treated about the same. Most
@@ -267,7 +262,7 @@ int cvmx_helper_interface_probe(int interface)
         case CVMX_HELPER_INTERFACE_MODE_RGMII:
         case CVMX_HELPER_INTERFACE_MODE_GMII:
                 interface_port_count[interface] =
-                    __cvmx_helper_rgmii_probe(interface);
+                    __cvmx_helper_rgmii_enumerate(interface);
                 break;
                 /*
                  * SPI4 can have 1-16 ports depending on the device at
@@ -275,7 +270,7 @@ int cvmx_helper_interface_probe(int interface)
                  */
         case CVMX_HELPER_INTERFACE_MODE_SPI:
                 interface_port_count[interface] =
-                    __cvmx_helper_spi_probe(interface);
+                    __cvmx_helper_spi_enumerate(interface);
                 break;
                 /*
                  * SGMII can have 1-4 ports depending on how many are
@@ -284,12 +279,12 @@ int cvmx_helper_interface_probe(int interface)
         case CVMX_HELPER_INTERFACE_MODE_SGMII:
         case CVMX_HELPER_INTERFACE_MODE_PICMG:
                 interface_port_count[interface] =
-                    __cvmx_helper_sgmii_probe(interface);
+                    __cvmx_helper_sgmii_enumerate(interface);
                 break;
                 /* PCI target Network Packet Interface */
         case CVMX_HELPER_INTERFACE_MODE_NPI:
                 interface_port_count[interface] =
-                    __cvmx_helper_npi_probe(interface);
+                    __cvmx_helper_npi_enumerate(interface);
                 break;
                 /*
                  * Special loopback only ports. These are not the same
@@ -297,7 +292,7 @@ int cvmx_helper_interface_probe(int interface)
                  */
         case CVMX_HELPER_INTERFACE_MODE_LOOP:
                 interface_port_count[interface] =
-                    __cvmx_helper_loop_probe(interface);
+                    __cvmx_helper_loop_enumerate(interface);
                 break;
         }
 
@@ -313,6 +308,74 @@ int cvmx_helper_interface_probe(int interface)
 }
 
 /**
+ * This function probes an interface to determine the actual
+ * number of hardware ports connected to it. It doesn't setup the
+ * ports or enable them. The main goal here is to set the global
+ * interface_port_count[interface] correctly. Hardware setup of the
+ * ports will be performed later.
+ *
+ * @interface: Interface to probe
+ *
+ * Returns Zero on success, negative on failure
+ */
+int cvmx_helper_interface_probe(int interface)
+{
+        cvmx_helper_interface_enumerate(interface);
+        /* At this stage in the game we don't want packets to be moving yet.
+           The following probe calls should perform hardware setup
+           needed to determine port counts. Receive must still be disabled */
+        switch (cvmx_helper_interface_get_mode(interface)) {
+                /* These types don't support ports to IPD/PKO */
+        case CVMX_HELPER_INTERFACE_MODE_DISABLED:
+        case CVMX_HELPER_INTERFACE_MODE_PCIE:
+                break;
+                /* XAUI is a single high speed port */
+        case CVMX_HELPER_INTERFACE_MODE_XAUI:
+                __cvmx_helper_xaui_probe(interface);
+                break;
+                /*
+                 * RGMII/GMII/MII are all treated about the same. Most
+                 * functions refer to these ports as RGMII.
+                 */
+        case CVMX_HELPER_INTERFACE_MODE_RGMII:
+        case CVMX_HELPER_INTERFACE_MODE_GMII:
+                __cvmx_helper_rgmii_probe(interface);
+                break;
+                /*
+                 * SPI4 can have 1-16 ports depending on the device at
+                 * the other end.
+                 */
+        case CVMX_HELPER_INTERFACE_MODE_SPI:
+                __cvmx_helper_spi_probe(interface);
+                break;
+                /*
+                 * SGMII can have 1-4 ports depending on how many are
+                 * hooked up.
+                 */
+        case CVMX_HELPER_INTERFACE_MODE_SGMII:
+        case CVMX_HELPER_INTERFACE_MODE_PICMG:
+                __cvmx_helper_sgmii_probe(interface);
+                break;
+                /* PCI target Network Packet Interface */
+        case CVMX_HELPER_INTERFACE_MODE_NPI:
+                __cvmx_helper_npi_probe(interface);
+                break;
+                /*
+                 * Special loopback only ports. These are not the same
+                 * as other ports in loopback mode.
+                 */
+        case CVMX_HELPER_INTERFACE_MODE_LOOP:
+                __cvmx_helper_loop_probe(interface);
+                break;
+        }
+
+        /* Make sure all global variables propagate to other cores */
+        CVMX_SYNCWS;
+
+        return 0;
+}
+
+/**
  * Setup the IPD/PIP for the ports on an interface. Packet
  * classification and tagging are set for every port on the
  * interface. The number of ports on the interface must already