MIPS: ath79: fix a wrong IRQ number

The Ubiquiti XM board setup code uses an invalid
IRQ number, because it if above of NR_IRQS. This
leads to failed 'request_irq' calls:

  ath9k 0000:00:00.0: request_irq failed
  ath9k: probe of 0000:00:00.0 failed with error -22

Preserve some IRQ numbers for the built-in IRQ
controller of PCI host controllers in the
AR71XX/AR724X SoCs, and use the correct IRQ
number in the board setup code.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/3495/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

1 files changed, 3 insertions, 2 deletions

diff --git a/arch/mips/ath79/mach-ubnt-xm.c b/arch/mips/ath79/mach-ubnt-xm.c
index 3266ee063bd6..0d95b67a7d4f 100644
--- a/arch/mips/ath79/mach-ubnt-xm.c
+++ b/arch/mips/ath79/mach-ubnt-xm.c
@@ -17,6 +17,8 @@
 #include <linux/ath9k_platform.h>
 #endif /* CONFIG_PCI */
 
+#include <asm/mach-ath79/irq.h>
+
 #include "machtypes.h"
 #include "dev-gpio-buttons.h"
 #include "dev-leds-gpio.h"
@@ -33,7 +35,6 @@
 #define UBNT_XM_KEYS_POLL_INTERVAL      20
 #define UBNT_XM_KEYS_DEBOUNCE_INTERVAL  (3 * UBNT_XM_KEYS_POLL_INTERVAL)
 
-#define UBNT_XM_PCI_IRQ                 48
 #define UBNT_XM_EEPROM_ADDR             (u8 *) KSEG1ADDR(0x1fff1000)
 
 static struct gpio_led ubnt_xm_leds_gpio[] __initdata = {
@@ -86,7 +87,7 @@ static struct ath9k_platform_data ubnt_xm_eeprom_data;
 
 static struct ar724x_pci_data ubnt_xm_pci_data[] = {
         {
-                .irq    = UBNT_XM_PCI_IRQ,
+                .irq    = ATH79_PCI_IRQ(0),
                 .pdata  = &ubnt_xm_eeprom_data,
         },
 };