diff options
author | Manuel Lauss <manuel.lauss@googlemail.com> | 2009-10-07 14:15:15 -0400 |
---|---|---|
committer | Ralf Baechle <ralf@linux-mips.org> | 2010-02-27 06:52:53 -0500 |
commit | 788144656b8a862e724a1296e64ab6375eb541ed (patch) | |
tree | 96208eed56da25acdf9d923b9d9986e82dcd8944 /arch/mips/alchemy | |
parent | 93e9cd8485b31e5a33f1040bff4d15e65c0b2d19 (diff) |
MIPS: Alchemy: Stop IRQ name sharing
Eliminate the sharing of IRQ names among the differenct Alchemy
variants. IRQ numbers need no longer be hidden behind a
CONFIG_SOC_AU1XXX symbol: step 1 in my quest to make the Alchemy
code less reliant on a hardcoded subtype.
This patch also renames the GPIO irq number constants. It's really
an interrupt line, NOT a GPIO number!
Code which relied on certain irq numbers to have the same name
across all supported cpu subtypes is changed to determine current
cpu subtype at runtime; in some places this isn't possible so
a "compat" symbol is used.
Run-tested on DB1200.
Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Diffstat (limited to 'arch/mips/alchemy')
-rw-r--r-- | arch/mips/alchemy/common/dbdma.c | 61 | ||||
-rw-r--r-- | arch/mips/alchemy/common/dma.c | 36 | ||||
-rw-r--r-- | arch/mips/alchemy/common/irq.c | 290 | ||||
-rw-r--r-- | arch/mips/alchemy/common/platform.c | 8 | ||||
-rw-r--r-- | arch/mips/alchemy/common/time.c | 35 | ||||
-rw-r--r-- | arch/mips/alchemy/devboards/db1x00/board_setup.c | 64 | ||||
-rw-r--r-- | arch/mips/alchemy/devboards/db1x00/platform.c | 52 | ||||
-rw-r--r-- | arch/mips/alchemy/devboards/pb1000/board_setup.c | 2 | ||||
-rw-r--r-- | arch/mips/alchemy/devboards/pb1100/board_setup.c | 8 | ||||
-rw-r--r-- | arch/mips/alchemy/devboards/pb1100/platform.c | 6 | ||||
-rw-r--r-- | arch/mips/alchemy/devboards/pb1200/board_setup.c | 4 | ||||
-rw-r--r-- | arch/mips/alchemy/devboards/pb1500/board_setup.c | 20 | ||||
-rw-r--r-- | arch/mips/alchemy/devboards/pb1500/platform.c | 6 | ||||
-rw-r--r-- | arch/mips/alchemy/devboards/pb1550/board_setup.c | 10 | ||||
-rw-r--r-- | arch/mips/alchemy/devboards/pb1550/platform.c | 8 | ||||
-rw-r--r-- | arch/mips/alchemy/mtx-1/board_setup.c | 26 | ||||
-rw-r--r-- | arch/mips/alchemy/xxs1500/board_setup.c | 24 |
17 files changed, 376 insertions, 284 deletions
diff --git a/arch/mips/alchemy/common/dbdma.c b/arch/mips/alchemy/common/dbdma.c index f9201ca2295b..549b18f3c18b 100644 --- a/arch/mips/alchemy/common/dbdma.c +++ b/arch/mips/alchemy/common/dbdma.c | |||
@@ -30,6 +30,7 @@ | |||
30 | * | 30 | * |
31 | */ | 31 | */ |
32 | 32 | ||
33 | #include <linux/init.h> | ||
33 | #include <linux/kernel.h> | 34 | #include <linux/kernel.h> |
34 | #include <linux/slab.h> | 35 | #include <linux/slab.h> |
35 | #include <linux/spinlock.h> | 36 | #include <linux/spinlock.h> |
@@ -58,7 +59,6 @@ static DEFINE_SPINLOCK(au1xxx_dbdma_spin_lock); | |||
58 | 59 | ||
59 | static dbdma_global_t *dbdma_gptr = (dbdma_global_t *)DDMA_GLOBAL_BASE; | 60 | static dbdma_global_t *dbdma_gptr = (dbdma_global_t *)DDMA_GLOBAL_BASE; |
60 | static int dbdma_initialized; | 61 | static int dbdma_initialized; |
61 | static void au1xxx_dbdma_init(void); | ||
62 | 62 | ||
63 | static dbdev_tab_t dbdev_tab[] = { | 63 | static dbdev_tab_t dbdev_tab[] = { |
64 | #ifdef CONFIG_SOC_AU1550 | 64 | #ifdef CONFIG_SOC_AU1550 |
@@ -250,8 +250,7 @@ u32 au1xxx_dbdma_chan_alloc(u32 srcid, u32 destid, | |||
250 | * which can't be done successfully during board set up. | 250 | * which can't be done successfully during board set up. |
251 | */ | 251 | */ |
252 | if (!dbdma_initialized) | 252 | if (!dbdma_initialized) |
253 | au1xxx_dbdma_init(); | 253 | return 0; |
254 | dbdma_initialized = 1; | ||
255 | 254 | ||
256 | stp = find_dbdev_id(srcid); | 255 | stp = find_dbdev_id(srcid); |
257 | if (stp == NULL) | 256 | if (stp == NULL) |
@@ -871,28 +870,6 @@ static irqreturn_t dbdma_interrupt(int irq, void *dev_id) | |||
871 | return IRQ_RETVAL(1); | 870 | return IRQ_RETVAL(1); |
872 | } | 871 | } |
873 | 872 | ||
874 | static void au1xxx_dbdma_init(void) | ||
875 | { | ||
876 | int irq_nr; | ||
877 | |||
878 | dbdma_gptr->ddma_config = 0; | ||
879 | dbdma_gptr->ddma_throttle = 0; | ||
880 | dbdma_gptr->ddma_inten = 0xffff; | ||
881 | au_sync(); | ||
882 | |||
883 | #if defined(CONFIG_SOC_AU1550) | ||
884 | irq_nr = AU1550_DDMA_INT; | ||
885 | #elif defined(CONFIG_SOC_AU1200) | ||
886 | irq_nr = AU1200_DDMA_INT; | ||
887 | #else | ||
888 | #error Unknown Au1x00 SOC | ||
889 | #endif | ||
890 | |||
891 | if (request_irq(irq_nr, dbdma_interrupt, IRQF_DISABLED, | ||
892 | "Au1xxx dbdma", (void *)dbdma_gptr)) | ||
893 | printk(KERN_ERR "Can't get 1550 dbdma irq"); | ||
894 | } | ||
895 | |||
896 | void au1xxx_dbdma_dump(u32 chanid) | 873 | void au1xxx_dbdma_dump(u32 chanid) |
897 | { | 874 | { |
898 | chan_tab_t *ctp; | 875 | chan_tab_t *ctp; |
@@ -1041,4 +1018,38 @@ void au1xxx_dbdma_resume(void) | |||
1041 | } | 1018 | } |
1042 | } | 1019 | } |
1043 | #endif /* CONFIG_PM */ | 1020 | #endif /* CONFIG_PM */ |
1021 | |||
1022 | static int __init au1xxx_dbdma_init(void) | ||
1023 | { | ||
1024 | int irq_nr, ret; | ||
1025 | |||
1026 | dbdma_gptr->ddma_config = 0; | ||
1027 | dbdma_gptr->ddma_throttle = 0; | ||
1028 | dbdma_gptr->ddma_inten = 0xffff; | ||
1029 | au_sync(); | ||
1030 | |||
1031 | switch (alchemy_get_cputype()) { | ||
1032 | case ALCHEMY_CPU_AU1550: | ||
1033 | irq_nr = AU1550_DDMA_INT; | ||
1034 | break; | ||
1035 | case ALCHEMY_CPU_AU1200: | ||
1036 | irq_nr = AU1200_DDMA_INT; | ||
1037 | break; | ||
1038 | default: | ||
1039 | return -ENODEV; | ||
1040 | } | ||
1041 | |||
1042 | ret = request_irq(irq_nr, dbdma_interrupt, IRQF_DISABLED, | ||
1043 | "Au1xxx dbdma", (void *)dbdma_gptr); | ||
1044 | if (ret) | ||
1045 | printk(KERN_ERR "Cannot grab DBDMA interrupt!\n"); | ||
1046 | else { | ||
1047 | dbdma_initialized = 1; | ||
1048 | printk(KERN_INFO "Alchemy DBDMA initialized\n"); | ||
1049 | } | ||
1050 | |||
1051 | return ret; | ||
1052 | } | ||
1053 | subsys_initcall(au1xxx_dbdma_init); | ||
1054 | |||
1044 | #endif /* defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200) */ | 1055 | #endif /* defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200) */ |
diff --git a/arch/mips/alchemy/common/dma.c b/arch/mips/alchemy/common/dma.c index d6fbda232e6a..d5278877891d 100644 --- a/arch/mips/alchemy/common/dma.c +++ b/arch/mips/alchemy/common/dma.c | |||
@@ -29,6 +29,8 @@ | |||
29 | * 675 Mass Ave, Cambridge, MA 02139, USA. | 29 | * 675 Mass Ave, Cambridge, MA 02139, USA. |
30 | * | 30 | * |
31 | */ | 31 | */ |
32 | |||
33 | #include <linux/init.h> | ||
32 | #include <linux/module.h> | 34 | #include <linux/module.h> |
33 | #include <linux/kernel.h> | 35 | #include <linux/kernel.h> |
34 | #include <linux/errno.h> | 36 | #include <linux/errno.h> |
@@ -188,17 +190,14 @@ int request_au1000_dma(int dev_id, const char *dev_str, | |||
188 | dev = &dma_dev_table[dev_id]; | 190 | dev = &dma_dev_table[dev_id]; |
189 | 191 | ||
190 | if (irqhandler) { | 192 | if (irqhandler) { |
191 | chan->irq = AU1000_DMA_INT_BASE + i; | ||
192 | chan->irq_dev = irq_dev_id; | 193 | chan->irq_dev = irq_dev_id; |
193 | ret = request_irq(chan->irq, irqhandler, irqflags, dev_str, | 194 | ret = request_irq(chan->irq, irqhandler, irqflags, dev_str, |
194 | chan->irq_dev); | 195 | chan->irq_dev); |
195 | if (ret) { | 196 | if (ret) { |
196 | chan->irq = 0; | ||
197 | chan->irq_dev = NULL; | 197 | chan->irq_dev = NULL; |
198 | return ret; | 198 | return ret; |
199 | } | 199 | } |
200 | } else { | 200 | } else { |
201 | chan->irq = 0; | ||
202 | chan->irq_dev = NULL; | 201 | chan->irq_dev = NULL; |
203 | } | 202 | } |
204 | 203 | ||
@@ -226,13 +225,40 @@ void free_au1000_dma(unsigned int dmanr) | |||
226 | } | 225 | } |
227 | 226 | ||
228 | disable_dma(dmanr); | 227 | disable_dma(dmanr); |
229 | if (chan->irq) | 228 | if (chan->irq_dev) |
230 | free_irq(chan->irq, chan->irq_dev); | 229 | free_irq(chan->irq, chan->irq_dev); |
231 | 230 | ||
232 | chan->irq = 0; | ||
233 | chan->irq_dev = NULL; | 231 | chan->irq_dev = NULL; |
234 | chan->dev_id = -1; | 232 | chan->dev_id = -1; |
235 | } | 233 | } |
236 | EXPORT_SYMBOL(free_au1000_dma); | 234 | EXPORT_SYMBOL(free_au1000_dma); |
237 | 235 | ||
236 | static int __init au1000_dma_init(void) | ||
237 | { | ||
238 | int base, i; | ||
239 | |||
240 | switch (alchemy_get_cputype()) { | ||
241 | case ALCHEMY_CPU_AU1000: | ||
242 | base = AU1000_DMA_INT_BASE; | ||
243 | break; | ||
244 | case ALCHEMY_CPU_AU1500: | ||
245 | base = AU1500_DMA_INT_BASE; | ||
246 | break; | ||
247 | case ALCHEMY_CPU_AU1100: | ||
248 | base = AU1100_DMA_INT_BASE; | ||
249 | break; | ||
250 | default: | ||
251 | goto out; | ||
252 | } | ||
253 | |||
254 | for (i = 0; i < NUM_AU1000_DMA_CHANNELS; i++) | ||
255 | au1000_dma_table[i].irq = base + i; | ||
256 | |||
257 | printk(KERN_INFO "Alchemy DMA initialized\n"); | ||
258 | |||
259 | out: | ||
260 | return 0; | ||
261 | } | ||
262 | arch_initcall(au1000_dma_init); | ||
263 | |||
238 | #endif /* AU1000 AU1500 AU1100 */ | 264 | #endif /* AU1000 AU1500 AU1100 */ |
diff --git a/arch/mips/alchemy/common/irq.c b/arch/mips/alchemy/common/irq.c index 8b5f00b3ad4e..f5b148af8b8c 100644 --- a/arch/mips/alchemy/common/irq.c +++ b/arch/mips/alchemy/common/irq.c | |||
@@ -53,160 +53,160 @@ struct au1xxx_irqmap { | |||
53 | int im_request; /* set 1 to get higher priority */ | 53 | int im_request; /* set 1 to get higher priority */ |
54 | } au1xxx_ic0_map[] __initdata = { | 54 | } au1xxx_ic0_map[] __initdata = { |
55 | #if defined(CONFIG_SOC_AU1000) | 55 | #if defined(CONFIG_SOC_AU1000) |
56 | { AU1000_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, | 56 | { AU1000_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, |
57 | { AU1000_UART1_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, | 57 | { AU1000_UART1_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, |
58 | { AU1000_UART2_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, | 58 | { AU1000_UART2_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, |
59 | { AU1000_UART3_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, | 59 | { AU1000_UART3_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, |
60 | { AU1000_SSI0_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, | 60 | { AU1000_SSI0_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, |
61 | { AU1000_SSI1_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, | 61 | { AU1000_SSI1_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, |
62 | { AU1000_DMA_INT_BASE, IRQ_TYPE_LEVEL_HIGH, 0 }, | 62 | { AU1000_DMA_INT_BASE, IRQ_TYPE_LEVEL_HIGH, 0 }, |
63 | { AU1000_DMA_INT_BASE+1, IRQ_TYPE_LEVEL_HIGH, 0 }, | 63 | { AU1000_DMA_INT_BASE+1, IRQ_TYPE_LEVEL_HIGH, 0 }, |
64 | { AU1000_DMA_INT_BASE+2, IRQ_TYPE_LEVEL_HIGH, 0 }, | 64 | { AU1000_DMA_INT_BASE+2, IRQ_TYPE_LEVEL_HIGH, 0 }, |
65 | { AU1000_DMA_INT_BASE+3, IRQ_TYPE_LEVEL_HIGH, 0 }, | 65 | { AU1000_DMA_INT_BASE+3, IRQ_TYPE_LEVEL_HIGH, 0 }, |
66 | { AU1000_DMA_INT_BASE+4, IRQ_TYPE_LEVEL_HIGH, 0 }, | 66 | { AU1000_DMA_INT_BASE+4, IRQ_TYPE_LEVEL_HIGH, 0 }, |
67 | { AU1000_DMA_INT_BASE+5, IRQ_TYPE_LEVEL_HIGH, 0 }, | 67 | { AU1000_DMA_INT_BASE+5, IRQ_TYPE_LEVEL_HIGH, 0 }, |
68 | { AU1000_DMA_INT_BASE+6, IRQ_TYPE_LEVEL_HIGH, 0 }, | 68 | { AU1000_DMA_INT_BASE+6, IRQ_TYPE_LEVEL_HIGH, 0 }, |
69 | { AU1000_DMA_INT_BASE+7, IRQ_TYPE_LEVEL_HIGH, 0 }, | 69 | { AU1000_DMA_INT_BASE+7, IRQ_TYPE_LEVEL_HIGH, 0 }, |
70 | { AU1000_TOY_INT, IRQ_TYPE_EDGE_RISING, 0 }, | 70 | { AU1000_TOY_INT, IRQ_TYPE_EDGE_RISING, 0 }, |
71 | { AU1000_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 }, | 71 | { AU1000_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 }, |
72 | { AU1000_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 }, | 72 | { AU1000_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 }, |
73 | { AU1000_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0 }, | 73 | { AU1000_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0 }, |
74 | { AU1000_RTC_INT, IRQ_TYPE_EDGE_RISING, 0 }, | 74 | { AU1000_RTC_INT, IRQ_TYPE_EDGE_RISING, 0 }, |
75 | { AU1000_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 }, | 75 | { AU1000_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 }, |
76 | { AU1000_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 }, | 76 | { AU1000_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 }, |
77 | { AU1000_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1 }, | 77 | { AU1000_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1 }, |
78 | { AU1000_IRDA_TX_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, | 78 | { AU1000_IRDA_TX_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, |
79 | { AU1000_IRDA_RX_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, | 79 | { AU1000_IRDA_RX_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, |
80 | { AU1000_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH, 1 }, | 80 | { AU1000_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH, 1 }, |
81 | { AU1000_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 0 }, | 81 | { AU1000_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 0 }, |
82 | { AU1000_USB_HOST_INT, IRQ_TYPE_LEVEL_LOW, 0 }, | 82 | { AU1000_USB_HOST_INT, IRQ_TYPE_LEVEL_LOW, 0 }, |
83 | { AU1000_ACSYNC_INT, IRQ_TYPE_EDGE_RISING, 0 }, | 83 | { AU1000_ACSYNC_INT, IRQ_TYPE_EDGE_RISING, 0 }, |
84 | { AU1000_MAC0_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, | 84 | { AU1000_MAC0_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, |
85 | { AU1000_MAC1_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, | 85 | { AU1000_MAC1_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, |
86 | { AU1000_AC97C_INT, IRQ_TYPE_EDGE_RISING, 0 }, | 86 | { AU1000_AC97C_INT, IRQ_TYPE_EDGE_RISING, 0 }, |
87 | 87 | ||
88 | #elif defined(CONFIG_SOC_AU1500) | 88 | #elif defined(CONFIG_SOC_AU1500) |
89 | 89 | ||
90 | { AU1500_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, | 90 | { AU1500_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, |
91 | { AU1000_PCI_INTA, IRQ_TYPE_LEVEL_LOW, 0 }, | 91 | { AU1500_PCI_INTA, IRQ_TYPE_LEVEL_LOW, 0 }, |
92 | { AU1000_PCI_INTB, IRQ_TYPE_LEVEL_LOW, 0 }, | 92 | { AU1500_PCI_INTB, IRQ_TYPE_LEVEL_LOW, 0 }, |
93 | { AU1500_UART3_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, | 93 | { AU1500_UART3_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, |
94 | { AU1000_PCI_INTC, IRQ_TYPE_LEVEL_LOW, 0 }, | 94 | { AU1500_PCI_INTC, IRQ_TYPE_LEVEL_LOW, 0 }, |
95 | { AU1000_PCI_INTD, IRQ_TYPE_LEVEL_LOW, 0 }, | 95 | { AU1500_PCI_INTD, IRQ_TYPE_LEVEL_LOW, 0 }, |
96 | { AU1000_DMA_INT_BASE, IRQ_TYPE_LEVEL_HIGH, 0 }, | 96 | { AU1500_DMA_INT_BASE, IRQ_TYPE_LEVEL_HIGH, 0 }, |
97 | { AU1000_DMA_INT_BASE+1, IRQ_TYPE_LEVEL_HIGH, 0 }, | 97 | { AU1500_DMA_INT_BASE+1, IRQ_TYPE_LEVEL_HIGH, 0 }, |
98 | { AU1000_DMA_INT_BASE+2, IRQ_TYPE_LEVEL_HIGH, 0 }, | 98 | { AU1500_DMA_INT_BASE+2, IRQ_TYPE_LEVEL_HIGH, 0 }, |
99 | { AU1000_DMA_INT_BASE+3, IRQ_TYPE_LEVEL_HIGH, 0 }, | 99 | { AU1500_DMA_INT_BASE+3, IRQ_TYPE_LEVEL_HIGH, 0 }, |
100 | { AU1000_DMA_INT_BASE+4, IRQ_TYPE_LEVEL_HIGH, 0 }, | 100 | { AU1500_DMA_INT_BASE+4, IRQ_TYPE_LEVEL_HIGH, 0 }, |
101 | { AU1000_DMA_INT_BASE+5, IRQ_TYPE_LEVEL_HIGH, 0 }, | 101 | { AU1500_DMA_INT_BASE+5, IRQ_TYPE_LEVEL_HIGH, 0 }, |
102 | { AU1000_DMA_INT_BASE+6, IRQ_TYPE_LEVEL_HIGH, 0 }, | 102 | { AU1500_DMA_INT_BASE+6, IRQ_TYPE_LEVEL_HIGH, 0 }, |
103 | { AU1000_DMA_INT_BASE+7, IRQ_TYPE_LEVEL_HIGH, 0 }, | 103 | { AU1500_DMA_INT_BASE+7, IRQ_TYPE_LEVEL_HIGH, 0 }, |
104 | { AU1000_TOY_INT, IRQ_TYPE_EDGE_RISING, 0 }, | 104 | { AU1500_TOY_INT, IRQ_TYPE_EDGE_RISING, 0 }, |
105 | { AU1000_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 }, | 105 | { AU1500_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 }, |
106 | { AU1000_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 }, | 106 | { AU1500_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 }, |
107 | { AU1000_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0 }, | 107 | { AU1500_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0 }, |
108 | { AU1000_RTC_INT, IRQ_TYPE_EDGE_RISING, 0 }, | 108 | { AU1500_RTC_INT, IRQ_TYPE_EDGE_RISING, 0 }, |
109 | { AU1000_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 }, | 109 | { AU1500_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 }, |
110 | { AU1000_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 }, | 110 | { AU1500_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 }, |
111 | { AU1000_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1 }, | 111 | { AU1500_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1 }, |
112 | { AU1000_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH, 1 }, | 112 | { AU1500_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH, 1 }, |
113 | { AU1000_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 0 }, | 113 | { AU1500_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 0 }, |
114 | { AU1000_USB_HOST_INT, IRQ_TYPE_LEVEL_LOW, 0 }, | 114 | { AU1500_USB_HOST_INT, IRQ_TYPE_LEVEL_LOW, 0 }, |
115 | { AU1000_ACSYNC_INT, IRQ_TYPE_EDGE_RISING, 0 }, | 115 | { AU1500_ACSYNC_INT, IRQ_TYPE_EDGE_RISING, 0 }, |
116 | { AU1500_MAC0_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, | 116 | { AU1500_MAC0_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, |
117 | { AU1500_MAC1_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, | 117 | { AU1500_MAC1_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, |
118 | { AU1000_AC97C_INT, IRQ_TYPE_EDGE_RISING, 0 }, | 118 | { AU1500_AC97C_INT, IRQ_TYPE_EDGE_RISING, 0 }, |
119 | 119 | ||
120 | #elif defined(CONFIG_SOC_AU1100) | 120 | #elif defined(CONFIG_SOC_AU1100) |
121 | 121 | ||
122 | { AU1100_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, | 122 | { AU1100_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, |
123 | { AU1100_UART1_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, | 123 | { AU1100_UART1_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, |
124 | { AU1100_SD_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, | 124 | { AU1100_SD_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, |
125 | { AU1100_UART3_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, | 125 | { AU1100_UART3_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, |
126 | { AU1000_SSI0_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, | 126 | { AU1100_SSI0_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, |
127 | { AU1000_SSI1_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, | 127 | { AU1100_SSI1_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, |
128 | { AU1000_DMA_INT_BASE, IRQ_TYPE_LEVEL_HIGH, 0 }, | 128 | { AU1100_DMA_INT_BASE, IRQ_TYPE_LEVEL_HIGH, 0 }, |
129 | { AU1000_DMA_INT_BASE+1, IRQ_TYPE_LEVEL_HIGH, 0 }, | 129 | { AU1100_DMA_INT_BASE+1, IRQ_TYPE_LEVEL_HIGH, 0 }, |
130 | { AU1000_DMA_INT_BASE+2, IRQ_TYPE_LEVEL_HIGH, 0 }, | 130 | { AU1100_DMA_INT_BASE+2, IRQ_TYPE_LEVEL_HIGH, 0 }, |
131 | { AU1000_DMA_INT_BASE+3, IRQ_TYPE_LEVEL_HIGH, 0 }, | 131 | { AU1100_DMA_INT_BASE+3, IRQ_TYPE_LEVEL_HIGH, 0 }, |
132 | { AU1000_DMA_INT_BASE+4, IRQ_TYPE_LEVEL_HIGH, 0 }, | 132 | { AU1100_DMA_INT_BASE+4, IRQ_TYPE_LEVEL_HIGH, 0 }, |
133 | { AU1000_DMA_INT_BASE+5, IRQ_TYPE_LEVEL_HIGH, 0 }, | 133 | { AU1100_DMA_INT_BASE+5, IRQ_TYPE_LEVEL_HIGH, 0 }, |
134 | { AU1000_DMA_INT_BASE+6, IRQ_TYPE_LEVEL_HIGH, 0 }, | 134 | { AU1100_DMA_INT_BASE+6, IRQ_TYPE_LEVEL_HIGH, 0 }, |
135 | { AU1000_DMA_INT_BASE+7, IRQ_TYPE_LEVEL_HIGH, 0 }, | 135 | { AU1100_DMA_INT_BASE+7, IRQ_TYPE_LEVEL_HIGH, 0 }, |
136 | { AU1000_TOY_INT, IRQ_TYPE_EDGE_RISING, 0 }, | 136 | { AU1100_TOY_INT, IRQ_TYPE_EDGE_RISING, 0 }, |
137 | { AU1000_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 }, | 137 | { AU1100_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 }, |
138 | { AU1000_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 }, | 138 | { AU1100_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 }, |
139 | { AU1000_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0 }, | 139 | { AU1100_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0 }, |
140 | { AU1000_RTC_INT, IRQ_TYPE_EDGE_RISING, 0 }, | 140 | { AU1100_RTC_INT, IRQ_TYPE_EDGE_RISING, 0 }, |
141 | { AU1000_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 }, | 141 | { AU1100_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 }, |
142 | { AU1000_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 }, | 142 | { AU1100_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 }, |
143 | { AU1000_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1 }, | 143 | { AU1100_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1 }, |
144 | { AU1000_IRDA_TX_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, | 144 | { AU1100_IRDA_TX_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, |
145 | { AU1000_IRDA_RX_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, | 145 | { AU1100_IRDA_RX_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, |
146 | { AU1000_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH, 1 }, | 146 | { AU1100_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH, 1 }, |
147 | { AU1000_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 0 }, | 147 | { AU1100_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 0 }, |
148 | { AU1000_USB_HOST_INT, IRQ_TYPE_LEVEL_LOW, 0 }, | 148 | { AU1100_USB_HOST_INT, IRQ_TYPE_LEVEL_LOW, 0 }, |
149 | { AU1000_ACSYNC_INT, IRQ_TYPE_EDGE_RISING, 0 }, | 149 | { AU1100_ACSYNC_INT, IRQ_TYPE_EDGE_RISING, 0 }, |
150 | { AU1100_MAC0_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, | 150 | { AU1100_MAC0_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, |
151 | { AU1100_LCD_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, | 151 | { AU1100_LCD_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, |
152 | { AU1000_AC97C_INT, IRQ_TYPE_EDGE_RISING, 0 }, | 152 | { AU1100_AC97C_INT, IRQ_TYPE_EDGE_RISING, 0 }, |
153 | 153 | ||
154 | #elif defined(CONFIG_SOC_AU1550) | 154 | #elif defined(CONFIG_SOC_AU1550) |
155 | 155 | ||
156 | { AU1550_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, | 156 | { AU1550_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, |
157 | { AU1550_PCI_INTA, IRQ_TYPE_LEVEL_LOW, 0 }, | 157 | { AU1550_PCI_INTA, IRQ_TYPE_LEVEL_LOW, 0 }, |
158 | { AU1550_PCI_INTB, IRQ_TYPE_LEVEL_LOW, 0 }, | 158 | { AU1550_PCI_INTB, IRQ_TYPE_LEVEL_LOW, 0 }, |
159 | { AU1550_DDMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, | 159 | { AU1550_DDMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, |
160 | { AU1550_CRYPTO_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, | 160 | { AU1550_CRYPTO_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, |
161 | { AU1550_PCI_INTC, IRQ_TYPE_LEVEL_LOW, 0 }, | 161 | { AU1550_PCI_INTC, IRQ_TYPE_LEVEL_LOW, 0 }, |
162 | { AU1550_PCI_INTD, IRQ_TYPE_LEVEL_LOW, 0 }, | 162 | { AU1550_PCI_INTD, IRQ_TYPE_LEVEL_LOW, 0 }, |
163 | { AU1550_PCI_RST_INT, IRQ_TYPE_LEVEL_LOW, 0 }, | 163 | { AU1550_PCI_RST_INT, IRQ_TYPE_LEVEL_LOW, 0 }, |
164 | { AU1550_UART1_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, | 164 | { AU1550_UART1_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, |
165 | { AU1550_UART3_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, | 165 | { AU1550_UART3_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, |
166 | { AU1550_PSC0_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, | 166 | { AU1550_PSC0_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, |
167 | { AU1550_PSC1_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, | 167 | { AU1550_PSC1_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, |
168 | { AU1550_PSC2_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, | 168 | { AU1550_PSC2_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, |
169 | { AU1550_PSC3_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, | 169 | { AU1550_PSC3_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, |
170 | { AU1000_TOY_INT, IRQ_TYPE_EDGE_RISING, 0 }, | 170 | { AU1550_TOY_INT, IRQ_TYPE_EDGE_RISING, 0 }, |
171 | { AU1000_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 }, | 171 | { AU1550_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 }, |
172 | { AU1000_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 }, | 172 | { AU1550_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 }, |
173 | { AU1000_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0 }, | 173 | { AU1550_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0 }, |
174 | { AU1000_RTC_INT, IRQ_TYPE_EDGE_RISING, 0 }, | 174 | { AU1550_RTC_INT, IRQ_TYPE_EDGE_RISING, 0 }, |
175 | { AU1000_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 }, | 175 | { AU1550_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 }, |
176 | { AU1000_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 }, | 176 | { AU1550_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 }, |
177 | { AU1000_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1 }, | 177 | { AU1550_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1 }, |
178 | { AU1550_NAND_INT, IRQ_TYPE_EDGE_RISING, 0 }, | 178 | { AU1550_NAND_INT, IRQ_TYPE_EDGE_RISING, 0 }, |
179 | { AU1550_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH, 1 }, | 179 | { AU1550_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH, 1 }, |
180 | { AU1550_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 0 }, | 180 | { AU1550_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 0 }, |
181 | { AU1550_USB_HOST_INT, IRQ_TYPE_LEVEL_LOW, 0 }, | 181 | { AU1550_USB_HOST_INT, IRQ_TYPE_LEVEL_LOW, 0 }, |
182 | { AU1550_MAC0_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, | 182 | { AU1550_MAC0_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, |
183 | { AU1550_MAC1_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, | 183 | { AU1550_MAC1_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, |
184 | 184 | ||
185 | #elif defined(CONFIG_SOC_AU1200) | 185 | #elif defined(CONFIG_SOC_AU1200) |
186 | 186 | ||
187 | { AU1200_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, | 187 | { AU1200_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, |
188 | { AU1200_SWT_INT, IRQ_TYPE_EDGE_RISING, 0 }, | 188 | { AU1200_SWT_INT, IRQ_TYPE_EDGE_RISING, 0 }, |
189 | { AU1200_SD_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, | 189 | { AU1200_SD_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, |
190 | { AU1200_DDMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, | 190 | { AU1200_DDMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, |
191 | { AU1200_MAE_BE_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, | 191 | { AU1200_MAE_BE_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, |
192 | { AU1200_UART1_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, | 192 | { AU1200_UART1_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, |
193 | { AU1200_MAE_FE_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, | 193 | { AU1200_MAE_FE_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, |
194 | { AU1200_PSC0_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, | 194 | { AU1200_PSC0_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, |
195 | { AU1200_PSC1_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, | 195 | { AU1200_PSC1_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, |
196 | { AU1200_AES_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, | 196 | { AU1200_AES_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, |
197 | { AU1200_CAMERA_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, | 197 | { AU1200_CAMERA_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, |
198 | { AU1000_TOY_INT, IRQ_TYPE_EDGE_RISING, 0 }, | 198 | { AU1200_TOY_INT, IRQ_TYPE_EDGE_RISING, 0 }, |
199 | { AU1000_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 }, | 199 | { AU1200_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 }, |
200 | { AU1000_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 }, | 200 | { AU1200_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 }, |
201 | { AU1000_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0 }, | 201 | { AU1200_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0 }, |
202 | { AU1000_RTC_INT, IRQ_TYPE_EDGE_RISING, 0 }, | 202 | { AU1200_RTC_INT, IRQ_TYPE_EDGE_RISING, 0 }, |
203 | { AU1000_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 }, | 203 | { AU1200_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 }, |
204 | { AU1000_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 }, | 204 | { AU1200_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 }, |
205 | { AU1000_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1 }, | 205 | { AU1200_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1 }, |
206 | { AU1200_NAND_INT, IRQ_TYPE_EDGE_RISING, 0 }, | 206 | { AU1200_NAND_INT, IRQ_TYPE_EDGE_RISING, 0 }, |
207 | { AU1200_USB_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, | 207 | { AU1200_USB_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, |
208 | { AU1200_LCD_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, | 208 | { AU1200_LCD_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, |
209 | { AU1200_MAE_BOTH_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, | 209 | { AU1200_MAE_BOTH_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, |
210 | 210 | ||
211 | #else | 211 | #else |
212 | #error "Error: Unknown Alchemy SOC" | 212 | #error "Error: Unknown Alchemy SOC" |
@@ -316,7 +316,7 @@ static void au1x_ic1_unmask(unsigned int irq_nr) | |||
316 | * nowhere in the current kernel sources is it disabled. --mlau | 316 | * nowhere in the current kernel sources is it disabled. --mlau |
317 | */ | 317 | */ |
318 | #if defined(CONFIG_MIPS_PB1000) | 318 | #if defined(CONFIG_MIPS_PB1000) |
319 | if (irq_nr == AU1000_GPIO_15) | 319 | if (irq_nr == AU1000_GPIO15_INT) |
320 | au_writel(0x4000, PB1000_MDR); /* enable int */ | 320 | au_writel(0x4000, PB1000_MDR); /* enable int */ |
321 | #endif | 321 | #endif |
322 | au_sync(); | 322 | au_sync(); |
@@ -388,11 +388,13 @@ static void au1x_ic1_maskack(unsigned int irq_nr) | |||
388 | 388 | ||
389 | static int au1x_ic1_setwake(unsigned int irq, unsigned int on) | 389 | static int au1x_ic1_setwake(unsigned int irq, unsigned int on) |
390 | { | 390 | { |
391 | unsigned int bit = irq - AU1000_INTC1_INT_BASE; | 391 | int bit = irq - AU1000_INTC1_INT_BASE; |
392 | unsigned long wakemsk, flags; | 392 | unsigned long wakemsk, flags; |
393 | 393 | ||
394 | /* only GPIO 0-7 can act as wakeup source: */ | 394 | /* only GPIO 0-7 can act as wakeup source. Fortunately these |
395 | if ((irq < AU1000_GPIO_0) || (irq > AU1000_GPIO_7)) | 395 | * are wired up identically on all supported variants. |
396 | */ | ||
397 | if ((bit < 0) || (bit > 7)) | ||
396 | return -EINVAL; | 398 | return -EINVAL; |
397 | 399 | ||
398 | local_irq_save(flags); | 400 | local_irq_save(flags); |
diff --git a/arch/mips/alchemy/common/platform.c b/arch/mips/alchemy/common/platform.c index 2b76a57c4947..5a9a4f9eba2e 100644 --- a/arch/mips/alchemy/common/platform.c +++ b/arch/mips/alchemy/common/platform.c | |||
@@ -73,8 +73,8 @@ static struct resource au1xxx_usb_ohci_resources[] = { | |||
73 | .flags = IORESOURCE_MEM, | 73 | .flags = IORESOURCE_MEM, |
74 | }, | 74 | }, |
75 | [1] = { | 75 | [1] = { |
76 | .start = AU1000_USB_HOST_INT, | 76 | .start = FOR_PLATFORM_C_USB_HOST_INT, |
77 | .end = AU1000_USB_HOST_INT, | 77 | .end = FOR_PLATFORM_C_USB_HOST_INT, |
78 | .flags = IORESOURCE_IRQ, | 78 | .flags = IORESOURCE_IRQ, |
79 | }, | 79 | }, |
80 | }; | 80 | }; |
@@ -132,8 +132,8 @@ static struct resource au1xxx_usb_ehci_resources[] = { | |||
132 | .flags = IORESOURCE_MEM, | 132 | .flags = IORESOURCE_MEM, |
133 | }, | 133 | }, |
134 | [1] = { | 134 | [1] = { |
135 | .start = AU1000_USB_HOST_INT, | 135 | .start = AU1200_USB_INT, |
136 | .end = AU1000_USB_HOST_INT, | 136 | .end = AU1200_USB_INT, |
137 | .flags = IORESOURCE_IRQ, | 137 | .flags = IORESOURCE_IRQ, |
138 | }, | 138 | }, |
139 | }; | 139 | }; |
diff --git a/arch/mips/alchemy/common/time.c b/arch/mips/alchemy/common/time.c index 379a664809b0..2aecb2fdf982 100644 --- a/arch/mips/alchemy/common/time.c +++ b/arch/mips/alchemy/common/time.c | |||
@@ -1,5 +1,5 @@ | |||
1 | /* | 1 | /* |
2 | * Copyright (C) 2008 Manuel Lauss <mano@roarinelk.homelinux.net> | 2 | * Copyright (C) 2008-2009 Manuel Lauss <manuel.lauss@gmail.com> |
3 | * | 3 | * |
4 | * Previous incarnations were: | 4 | * Previous incarnations were: |
5 | * Copyright (C) 2001, 2006, 2008 MontaVista Software, <source@mvista.com> | 5 | * Copyright (C) 2001, 2006, 2008 MontaVista Software, <source@mvista.com> |
@@ -85,7 +85,6 @@ static struct clock_event_device au1x_rtcmatch2_clockdev = { | |||
85 | .name = "rtcmatch2", | 85 | .name = "rtcmatch2", |
86 | .features = CLOCK_EVT_FEAT_ONESHOT, | 86 | .features = CLOCK_EVT_FEAT_ONESHOT, |
87 | .rating = 100, | 87 | .rating = 100, |
88 | .irq = AU1000_RTC_MATCH2_INT, | ||
89 | .set_next_event = au1x_rtcmatch2_set_next_event, | 88 | .set_next_event = au1x_rtcmatch2_set_next_event, |
90 | .set_mode = au1x_rtcmatch2_set_mode, | 89 | .set_mode = au1x_rtcmatch2_set_mode, |
91 | .cpumask = cpu_all_mask, | 90 | .cpumask = cpu_all_mask, |
@@ -98,11 +97,13 @@ static struct irqaction au1x_rtcmatch2_irqaction = { | |||
98 | .dev_id = &au1x_rtcmatch2_clockdev, | 97 | .dev_id = &au1x_rtcmatch2_clockdev, |
99 | }; | 98 | }; |
100 | 99 | ||
101 | void __init plat_time_init(void) | 100 | static int __init alchemy_time_init(unsigned int m2int) |
102 | { | 101 | { |
103 | struct clock_event_device *cd = &au1x_rtcmatch2_clockdev; | 102 | struct clock_event_device *cd = &au1x_rtcmatch2_clockdev; |
104 | unsigned long t; | 103 | unsigned long t; |
105 | 104 | ||
105 | au1x_rtcmatch2_clockdev.irq = m2int; | ||
106 | |||
106 | /* Check if firmware (YAMON, ...) has enabled 32kHz and clock | 107 | /* Check if firmware (YAMON, ...) has enabled 32kHz and clock |
107 | * has been detected. If so install the rtcmatch2 clocksource, | 108 | * has been detected. If so install the rtcmatch2 clocksource, |
108 | * otherwise don't bother. Note that both bits being set is by | 109 | * otherwise don't bother. Note that both bits being set is by |
@@ -148,13 +149,18 @@ void __init plat_time_init(void) | |||
148 | cd->max_delta_ns = clockevent_delta2ns(0xffffffff, cd); | 149 | cd->max_delta_ns = clockevent_delta2ns(0xffffffff, cd); |
149 | cd->min_delta_ns = clockevent_delta2ns(8, cd); /* ~0.25ms */ | 150 | cd->min_delta_ns = clockevent_delta2ns(8, cd); /* ~0.25ms */ |
150 | clockevents_register_device(cd); | 151 | clockevents_register_device(cd); |
151 | setup_irq(AU1000_RTC_MATCH2_INT, &au1x_rtcmatch2_irqaction); | 152 | setup_irq(m2int, &au1x_rtcmatch2_irqaction); |
152 | 153 | ||
153 | printk(KERN_INFO "Alchemy clocksource installed\n"); | 154 | printk(KERN_INFO "Alchemy clocksource installed\n"); |
154 | 155 | ||
155 | return; | 156 | return 0; |
156 | 157 | ||
157 | cntr_err: | 158 | cntr_err: |
159 | return -1; | ||
160 | } | ||
161 | |||
162 | static void __init alchemy_setup_c0timer(void) | ||
163 | { | ||
158 | /* | 164 | /* |
159 | * MIPS kernel assigns 'au1k_wait' to 'cpu_wait' before this | 165 | * MIPS kernel assigns 'au1k_wait' to 'cpu_wait' before this |
160 | * function is called. Because the Alchemy counters are unusable | 166 | * function is called. Because the Alchemy counters are unusable |
@@ -166,3 +172,22 @@ cntr_err: | |||
166 | r4k_clockevent_init(); | 172 | r4k_clockevent_init(); |
167 | init_r4k_clocksource(); | 173 | init_r4k_clocksource(); |
168 | } | 174 | } |
175 | |||
176 | static int alchemy_m2inttab[] __initdata = { | ||
177 | AU1000_RTC_MATCH2_INT, | ||
178 | AU1500_RTC_MATCH2_INT, | ||
179 | AU1100_RTC_MATCH2_INT, | ||
180 | AU1550_RTC_MATCH2_INT, | ||
181 | AU1200_RTC_MATCH2_INT, | ||
182 | }; | ||
183 | |||
184 | void __init plat_time_init(void) | ||
185 | { | ||
186 | int t; | ||
187 | |||
188 | t = alchemy_get_cputype(); | ||
189 | if (t == ALCHEMY_CPU_UNKNOWN) | ||
190 | alchemy_setup_c0timer(); | ||
191 | else if (alchemy_time_init(alchemy_m2inttab[t])) | ||
192 | alchemy_setup_c0timer(); | ||
193 | } | ||
diff --git a/arch/mips/alchemy/devboards/db1x00/board_setup.c b/arch/mips/alchemy/devboards/db1x00/board_setup.c index 3b228a282b07..64eb26ffd088 100644 --- a/arch/mips/alchemy/devboards/db1x00/board_setup.c +++ b/arch/mips/alchemy/devboards/db1x00/board_setup.c | |||
@@ -39,32 +39,32 @@ | |||
39 | 39 | ||
40 | #ifdef CONFIG_MIPS_DB1500 | 40 | #ifdef CONFIG_MIPS_DB1500 |
41 | char irq_tab_alchemy[][5] __initdata = { | 41 | char irq_tab_alchemy[][5] __initdata = { |
42 | [12] = { -1, INTA, INTX, INTX, INTX }, /* IDSEL 12 - HPT371 */ | 42 | [12] = { -1, AU1500_PCI_INTA, 0xff, 0xff, 0xff }, /* IDSEL 12 - HPT371 */ |
43 | [13] = { -1, INTA, INTB, INTC, INTD }, /* IDSEL 13 - PCI slot */ | 43 | [13] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, AU1500_PCI_INTC, AU1500_PCI_INTD }, /* IDSEL 13 - PCI slot */ |
44 | }; | 44 | }; |
45 | #endif | 45 | #endif |
46 | 46 | ||
47 | #ifdef CONFIG_MIPS_BOSPORUS | 47 | #ifdef CONFIG_MIPS_BOSPORUS |
48 | char irq_tab_alchemy[][5] __initdata = { | 48 | char irq_tab_alchemy[][5] __initdata = { |
49 | [11] = { -1, INTA, INTB, INTX, INTX }, /* IDSEL 11 - miniPCI */ | 49 | [11] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, 0xff, 0xff }, /* IDSEL 11 - miniPCI */ |
50 | [12] = { -1, INTA, INTX, INTX, INTX }, /* IDSEL 12 - SN1741 */ | 50 | [12] = { -1, AU1500_PCI_INTA, 0xff, 0xff, 0xff }, /* IDSEL 12 - SN1741 */ |
51 | [13] = { -1, INTA, INTB, INTC, INTD }, /* IDSEL 13 - PCI slot */ | 51 | [13] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, AU1500_PCI_INTC, AU1500_PCI_INTD }, /* IDSEL 13 - PCI slot */ |
52 | }; | 52 | }; |
53 | #endif | 53 | #endif |
54 | 54 | ||
55 | #ifdef CONFIG_MIPS_MIRAGE | 55 | #ifdef CONFIG_MIPS_MIRAGE |
56 | char irq_tab_alchemy[][5] __initdata = { | 56 | char irq_tab_alchemy[][5] __initdata = { |
57 | [11] = { -1, INTD, INTX, INTX, INTX }, /* IDSEL 11 - SMI VGX */ | 57 | [11] = { -1, AU1500_PCI_INTD, 0xff, 0xff, 0xff }, /* IDSEL 11 - SMI VGX */ |
58 | [12] = { -1, INTX, INTX, INTC, INTX }, /* IDSEL 12 - PNX1300 */ | 58 | [12] = { -1, 0xff, 0xff, AU1500_PCI_INTC, 0xff }, /* IDSEL 12 - PNX1300 */ |
59 | [13] = { -1, INTA, INTB, INTX, INTX }, /* IDSEL 13 - miniPCI */ | 59 | [13] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, 0xff, 0xff }, /* IDSEL 13 - miniPCI */ |
60 | }; | 60 | }; |
61 | #endif | 61 | #endif |
62 | 62 | ||
63 | #ifdef CONFIG_MIPS_DB1550 | 63 | #ifdef CONFIG_MIPS_DB1550 |
64 | char irq_tab_alchemy[][5] __initdata = { | 64 | char irq_tab_alchemy[][5] __initdata = { |
65 | [11] = { -1, INTC, INTX, INTX, INTX }, /* IDSEL 11 - on-board HPT371 */ | 65 | [11] = { -1, AU1550_PCI_INTC, 0xff, 0xff, 0xff }, /* IDSEL 11 - on-board HPT371 */ |
66 | [12] = { -1, INTB, INTC, INTD, INTA }, /* IDSEL 12 - PCI slot 2 (left) */ | 66 | [12] = { -1, AU1550_PCI_INTB, AU1550_PCI_INTC, AU1550_PCI_INTD, AU1550_PCI_INTA }, /* IDSEL 12 - PCI slot 2 (left) */ |
67 | [13] = { -1, INTA, INTB, INTC, INTD }, /* IDSEL 13 - PCI slot 1 (right) */ | 67 | [13] = { -1, AU1550_PCI_INTA, AU1550_PCI_INTB, AU1550_PCI_INTC, AU1550_PCI_INTD }, /* IDSEL 13 - PCI slot 1 (right) */ |
68 | }; | 68 | }; |
69 | #endif | 69 | #endif |
70 | 70 | ||
@@ -185,21 +185,35 @@ void __init board_setup(void) | |||
185 | static int __init db1x00_init_irq(void) | 185 | static int __init db1x00_init_irq(void) |
186 | { | 186 | { |
187 | #if defined(CONFIG_MIPS_MIRAGE) | 187 | #if defined(CONFIG_MIPS_MIRAGE) |
188 | set_irq_type(AU1000_GPIO_7, IRQF_TRIGGER_RISING); /* TS pendown */ | 188 | set_irq_type(AU1500_GPIO7_INT, IRQF_TRIGGER_RISING); /* TS pendown */ |
189 | #elif defined(CONFIG_MIPS_DB1550) | 189 | #elif defined(CONFIG_MIPS_DB1550) |
190 | set_irq_type(AU1000_GPIO_0, IRQF_TRIGGER_LOW); /* CD0# */ | 190 | set_irq_type(AU1550_GPIO0_INT, IRQF_TRIGGER_LOW); /* CD0# */ |
191 | set_irq_type(AU1000_GPIO_1, IRQF_TRIGGER_LOW); /* CD1# */ | 191 | set_irq_type(AU1550_GPIO1_INT, IRQF_TRIGGER_LOW); /* CD1# */ |
192 | set_irq_type(AU1000_GPIO_3, IRQF_TRIGGER_LOW); /* CARD0# */ | 192 | set_irq_type(AU1550_GPIO3_INT, IRQF_TRIGGER_LOW); /* CARD0# */ |
193 | set_irq_type(AU1000_GPIO_5, IRQF_TRIGGER_LOW); /* CARD1# */ | 193 | set_irq_type(AU1550_GPIO5_INT, IRQF_TRIGGER_LOW); /* CARD1# */ |
194 | set_irq_type(AU1000_GPIO_21, IRQF_TRIGGER_LOW); /* STSCHG0# */ | 194 | set_irq_type(AU1550_GPIO21_INT, IRQF_TRIGGER_LOW); /* STSCHG0# */ |
195 | set_irq_type(AU1000_GPIO_22, IRQF_TRIGGER_LOW); /* STSCHG1# */ | 195 | set_irq_type(AU1550_GPIO22_INT, IRQF_TRIGGER_LOW); /* STSCHG1# */ |
196 | #else | 196 | #elif defined(CONFIG_MIPS_DB1500) |
197 | set_irq_type(AU1000_GPIO_0, IRQF_TRIGGER_LOW); /* CD0# */ | 197 | set_irq_type(AU1500_GPIO0_INT, IRQF_TRIGGER_LOW); /* CD0# */ |
198 | set_irq_type(AU1000_GPIO_3, IRQF_TRIGGER_LOW); /* CD1# */ | 198 | set_irq_type(AU1500_GPIO3_INT, IRQF_TRIGGER_LOW); /* CD1# */ |
199 | set_irq_type(AU1000_GPIO_2, IRQF_TRIGGER_LOW); /* CARD0# */ | 199 | set_irq_type(AU1500_GPIO2_INT, IRQF_TRIGGER_LOW); /* CARD0# */ |
200 | set_irq_type(AU1000_GPIO_5, IRQF_TRIGGER_LOW); /* CARD1# */ | 200 | set_irq_type(AU1500_GPIO5_INT, IRQF_TRIGGER_LOW); /* CARD1# */ |
201 | set_irq_type(AU1000_GPIO_1, IRQF_TRIGGER_LOW); /* STSCHG0# */ | 201 | set_irq_type(AU1500_GPIO1_INT, IRQF_TRIGGER_LOW); /* STSCHG0# */ |
202 | set_irq_type(AU1000_GPIO_4, IRQF_TRIGGER_LOW); /* STSCHG1# */ | 202 | set_irq_type(AU1500_GPIO4_INT, IRQF_TRIGGER_LOW); /* STSCHG1# */ |
203 | #elif defined(CONFIG_MIPS_DB1100) | ||
204 | set_irq_type(AU1100_GPIO0_INT, IRQF_TRIGGER_LOW); /* CD0# */ | ||
205 | set_irq_type(AU1100_GPIO3_INT, IRQF_TRIGGER_LOW); /* CD1# */ | ||
206 | set_irq_type(AU1100_GPIO2_INT, IRQF_TRIGGER_LOW); /* CARD0# */ | ||
207 | set_irq_type(AU1100_GPIO5_INT, IRQF_TRIGGER_LOW); /* CARD1# */ | ||
208 | set_irq_type(AU1100_GPIO1_INT, IRQF_TRIGGER_LOW); /* STSCHG0# */ | ||
209 | set_irq_type(AU1100_GPIO4_INT, IRQF_TRIGGER_LOW); /* STSCHG1# */ | ||
210 | #elif defined(CONFIG_MIPS_DB1000) | ||
211 | set_irq_type(AU1000_GPIO0_INT, IRQF_TRIGGER_LOW); /* CD0# */ | ||
212 | set_irq_type(AU1000_GPIO3_INT, IRQF_TRIGGER_LOW); /* CD1# */ | ||
213 | set_irq_type(AU1000_GPIO2_INT, IRQF_TRIGGER_LOW); /* CARD0# */ | ||
214 | set_irq_type(AU1000_GPIO5_INT, IRQF_TRIGGER_LOW); /* CARD1# */ | ||
215 | set_irq_type(AU1000_GPIO1_INT, IRQF_TRIGGER_LOW); /* STSCHG0# */ | ||
216 | set_irq_type(AU1000_GPIO4_INT, IRQF_TRIGGER_LOW); /* STSCHG1# */ | ||
203 | #endif | 217 | #endif |
204 | return 0; | 218 | return 0; |
205 | } | 219 | } |
diff --git a/arch/mips/alchemy/devboards/db1x00/platform.c b/arch/mips/alchemy/devboards/db1x00/platform.c index b762b790512a..0ac5dd05d3c0 100644 --- a/arch/mips/alchemy/devboards/db1x00/platform.c +++ b/arch/mips/alchemy/devboards/db1x00/platform.c | |||
@@ -24,32 +24,46 @@ | |||
24 | #include <asm/mach-au1x00/au1xxx.h> | 24 | #include <asm/mach-au1x00/au1xxx.h> |
25 | #include "../platform.h" | 25 | #include "../platform.h" |
26 | 26 | ||
27 | #if defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1100) || \ | ||
28 | defined(CONFIG_MIPS_DB1500) || defined(CONFIG_MIPS_DB1550) | ||
29 | #define DB1XXX_HAS_PCMCIA | ||
30 | #endif | ||
31 | |||
32 | /* DB1xxx PCMCIA interrupt sources: | 27 | /* DB1xxx PCMCIA interrupt sources: |
33 | * CD0/1 GPIO0/3 | 28 | * CD0/1 GPIO0/3 |
34 | * STSCHG0/1 GPIO1/4 | 29 | * STSCHG0/1 GPIO1/4 |
35 | * CARD0/1 GPIO2/5 | 30 | * CARD0/1 GPIO2/5 |
36 | * Db1550: 0/1, 21/22, 3/5 | 31 | * Db1550: 0/1, 21/22, 3/5 |
37 | */ | 32 | */ |
38 | #ifndef CONFIG_MIPS_DB1550 | 33 | |
39 | /* Db1000, Db1100, Db1500 */ | 34 | #define DB1XXX_HAS_PCMCIA |
40 | #define DB1XXX_PCMCIA_CD0 AU1000_GPIO_0 | 35 | |
41 | #define DB1XXX_PCMCIA_STSCHG0 AU1000_GPIO_1 | 36 | #if defined(CONFIG_MIPS_DB1000) |
42 | #define DB1XXX_PCMCIA_CARD0 AU1000_GPIO_2 | 37 | #define DB1XXX_PCMCIA_CD0 AU1000_GPIO0_INT |
43 | #define DB1XXX_PCMCIA_CD1 AU1000_GPIO_3 | 38 | #define DB1XXX_PCMCIA_STSCHG0 AU1000_GPIO1_INT |
44 | #define DB1XXX_PCMCIA_STSCHG1 AU1000_GPIO_4 | 39 | #define DB1XXX_PCMCIA_CARD0 AU1000_GPIO2_INT |
45 | #define DB1XXX_PCMCIA_CARD1 AU1000_GPIO_5 | 40 | #define DB1XXX_PCMCIA_CD1 AU1000_GPIO3_INT |
41 | #define DB1XXX_PCMCIA_STSCHG1 AU1000_GPIO4_INT | ||
42 | #define DB1XXX_PCMCIA_CARD1 AU1000_GPIO5_INT | ||
43 | #elif defined(CONFIG_MIPS_DB1100) | ||
44 | #define DB1XXX_PCMCIA_CD0 AU1100_GPIO0_INT | ||
45 | #define DB1XXX_PCMCIA_STSCHG0 AU1100_GPIO1_INT | ||
46 | #define DB1XXX_PCMCIA_CARD0 AU1100_GPIO2_INT | ||
47 | #define DB1XXX_PCMCIA_CD1 AU1100_GPIO3_INT | ||
48 | #define DB1XXX_PCMCIA_STSCHG1 AU1100_GPIO4_INT | ||
49 | #define DB1XXX_PCMCIA_CARD1 AU1100_GPIO5_INT | ||
50 | #elif defined(CONFIG_MIPS_DB1500) | ||
51 | #define DB1XXX_PCMCIA_CD0 AU1500_GPIO0_INT | ||
52 | #define DB1XXX_PCMCIA_STSCHG0 AU1500_GPIO1_INT | ||
53 | #define DB1XXX_PCMCIA_CARD0 AU1500_GPIO2_INT | ||
54 | #define DB1XXX_PCMCIA_CD1 AU1500_GPIO3_INT | ||
55 | #define DB1XXX_PCMCIA_STSCHG1 AU1500_GPIO4_INT | ||
56 | #define DB1XXX_PCMCIA_CARD1 AU1500_GPIO5_INT | ||
57 | #elif defined(CONFIG_MIPS_DB1550) | ||
58 | #define DB1XXX_PCMCIA_CD0 AU1550_GPIO0_INT | ||
59 | #define DB1XXX_PCMCIA_STSCHG0 AU1550_GPIO21_INT | ||
60 | #define DB1XXX_PCMCIA_CARD0 AU1550_GPIO3_INT | ||
61 | #define DB1XXX_PCMCIA_CD1 AU1550_GPIO1_INT | ||
62 | #define DB1XXX_PCMCIA_STSCHG1 AU1550_GPIO22_INT | ||
63 | #define DB1XXX_PCMCIA_CARD1 AU1550_GPIO5_INT | ||
46 | #else | 64 | #else |
47 | #define DB1XXX_PCMCIA_CD0 AU1000_GPIO_0 | 65 | /* other board: no PCMCIA */ |
48 | #define DB1XXX_PCMCIA_STSCHG0 AU1500_GPIO_21 | 66 | #undef DB1XXX_HAS_PCMCIA |
49 | #define DB1XXX_PCMCIA_CARD0 AU1000_GPIO_3 | ||
50 | #define DB1XXX_PCMCIA_CD1 AU1000_GPIO_1 | ||
51 | #define DB1XXX_PCMCIA_STSCHG1 AU1500_GPIO_22 | ||
52 | #define DB1XXX_PCMCIA_CARD1 AU1000_GPIO_5 | ||
53 | #endif | 67 | #endif |
54 | 68 | ||
55 | static int __init db1xxx_dev_init(void) | 69 | static int __init db1xxx_dev_init(void) |
diff --git a/arch/mips/alchemy/devboards/pb1000/board_setup.c b/arch/mips/alchemy/devboards/pb1000/board_setup.c index f1cafea18655..287d661827eb 100644 --- a/arch/mips/alchemy/devboards/pb1000/board_setup.c +++ b/arch/mips/alchemy/devboards/pb1000/board_setup.c | |||
@@ -186,7 +186,7 @@ void __init board_setup(void) | |||
186 | 186 | ||
187 | static int __init pb1000_init_irq(void) | 187 | static int __init pb1000_init_irq(void) |
188 | { | 188 | { |
189 | set_irq_type(AU1000_GPIO_15, IRQF_TRIGGER_LOW); | 189 | set_irq_type(AU1000_GPIO15_INT, IRQF_TRIGGER_LOW); |
190 | return 0; | 190 | return 0; |
191 | } | 191 | } |
192 | arch_initcall(pb1000_init_irq); | 192 | arch_initcall(pb1000_init_irq); |
diff --git a/arch/mips/alchemy/devboards/pb1100/board_setup.c b/arch/mips/alchemy/devboards/pb1100/board_setup.c index b282d93d1445..e0bd855f899b 100644 --- a/arch/mips/alchemy/devboards/pb1100/board_setup.c +++ b/arch/mips/alchemy/devboards/pb1100/board_setup.c | |||
@@ -147,10 +147,10 @@ void __init board_setup(void) | |||
147 | 147 | ||
148 | static int __init pb1100_init_irq(void) | 148 | static int __init pb1100_init_irq(void) |
149 | { | 149 | { |
150 | set_irq_type(AU1000_GPIO_9, IRQF_TRIGGER_LOW); /* PCCD# */ | 150 | set_irq_type(AU1100_GPIO9_INT, IRQF_TRIGGER_LOW); /* PCCD# */ |
151 | set_irq_type(AU1000_GPIO_10, IRQF_TRIGGER_LOW); /* PCSTSCHG# */ | 151 | set_irq_type(AU1100_GPIO10_INT, IRQF_TRIGGER_LOW); /* PCSTSCHG# */ |
152 | set_irq_type(AU1000_GPIO_11, IRQF_TRIGGER_LOW); /* PCCard# */ | 152 | set_irq_type(AU1100_GPIO11_INT, IRQF_TRIGGER_LOW); /* PCCard# */ |
153 | set_irq_type(AU1000_GPIO_13, IRQF_TRIGGER_LOW); /* DC_IRQ# */ | 153 | set_irq_type(AU1100_GPIO13_INT, IRQF_TRIGGER_LOW); /* DC_IRQ# */ |
154 | 154 | ||
155 | return 0; | 155 | return 0; |
156 | } | 156 | } |
diff --git a/arch/mips/alchemy/devboards/pb1100/platform.c b/arch/mips/alchemy/devboards/pb1100/platform.c index 8487da55a10c..ec932e773a40 100644 --- a/arch/mips/alchemy/devboards/pb1100/platform.c +++ b/arch/mips/alchemy/devboards/pb1100/platform.c | |||
@@ -33,9 +33,9 @@ static int __init pb1100_dev_init(void) | |||
33 | PCMCIA_MEM_PSEUDO_PHYS + 0x00040000 - 1, | 33 | PCMCIA_MEM_PSEUDO_PHYS + 0x00040000 - 1, |
34 | PCMCIA_IO_PSEUDO_PHYS, | 34 | PCMCIA_IO_PSEUDO_PHYS, |
35 | PCMCIA_IO_PSEUDO_PHYS + 0x00001000 - 1, | 35 | PCMCIA_IO_PSEUDO_PHYS + 0x00001000 - 1, |
36 | AU1000_GPIO_11, /* card */ | 36 | AU1100_GPIO11_INT, /* card */ |
37 | AU1000_GPIO_9, /* insert */ | 37 | AU1100_GPIO9_INT, /* insert */ |
38 | /*AU1000_GPIO_10*/0, /* stschg */ | 38 | /*AU1100_GPIO10_INT*/0, /* stschg */ |
39 | 0, /* eject */ | 39 | 0, /* eject */ |
40 | 0); /* id */ | 40 | 0); /* id */ |
41 | return 0; | 41 | return 0; |
diff --git a/arch/mips/alchemy/devboards/pb1200/board_setup.c b/arch/mips/alchemy/devboards/pb1200/board_setup.c index 675357a7976e..352acf68fc8d 100644 --- a/arch/mips/alchemy/devboards/pb1200/board_setup.c +++ b/arch/mips/alchemy/devboards/pb1200/board_setup.c | |||
@@ -171,8 +171,8 @@ static int __init pb1200_init_irq(void) | |||
171 | } | 171 | } |
172 | #endif | 172 | #endif |
173 | 173 | ||
174 | set_irq_type(AU1000_GPIO_7, IRQF_TRIGGER_LOW); | 174 | set_irq_type(AU1200_GPIO7_INT, IRQF_TRIGGER_LOW); |
175 | bcsr_init_irq(PB1200_INT_BEGIN, PB1200_INT_END, AU1000_GPIO_7); | 175 | bcsr_init_irq(PB1200_INT_BEGIN, PB1200_INT_END, AU1200_GPIO7_INT); |
176 | 176 | ||
177 | return 0; | 177 | return 0; |
178 | } | 178 | } |
diff --git a/arch/mips/alchemy/devboards/pb1500/board_setup.c b/arch/mips/alchemy/devboards/pb1500/board_setup.c index a148802fa427..3f0c92cb35bd 100644 --- a/arch/mips/alchemy/devboards/pb1500/board_setup.c +++ b/arch/mips/alchemy/devboards/pb1500/board_setup.c | |||
@@ -35,8 +35,8 @@ | |||
35 | 35 | ||
36 | 36 | ||
37 | char irq_tab_alchemy[][5] __initdata = { | 37 | char irq_tab_alchemy[][5] __initdata = { |
38 | [12] = { -1, INTA, INTX, INTX, INTX }, /* IDSEL 12 - HPT370 */ | 38 | [12] = { -1, AU1500_PCI_INTA, 0xff, 0xff, 0xff }, /* IDSEL 12 - HPT370 */ |
39 | [13] = { -1, INTA, INTB, INTC, INTD }, /* IDSEL 13 - PCI slot */ | 39 | [13] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, AU1500_PCI_INTC, AU1500_PCI_INTD }, /* IDSEL 13 - PCI slot */ |
40 | }; | 40 | }; |
41 | 41 | ||
42 | 42 | ||
@@ -155,14 +155,14 @@ void __init board_setup(void) | |||
155 | 155 | ||
156 | static int __init pb1500_init_irq(void) | 156 | static int __init pb1500_init_irq(void) |
157 | { | 157 | { |
158 | set_irq_type(AU1000_GPIO_9, IRQF_TRIGGER_LOW); /* CD0# */ | 158 | set_irq_type(AU1500_GPIO9_INT, IRQF_TRIGGER_LOW); /* CD0# */ |
159 | set_irq_type(AU1000_GPIO_10, IRQF_TRIGGER_LOW); /* CARD0 */ | 159 | set_irq_type(AU1500_GPIO10_INT, IRQF_TRIGGER_LOW); /* CARD0 */ |
160 | set_irq_type(AU1000_GPIO_11, IRQF_TRIGGER_LOW); /* STSCHG0# */ | 160 | set_irq_type(AU1500_GPIO11_INT, IRQF_TRIGGER_LOW); /* STSCHG0# */ |
161 | set_irq_type(AU1500_GPIO_204, IRQF_TRIGGER_HIGH); | 161 | set_irq_type(AU1500_GPIO204_INT, IRQF_TRIGGER_HIGH); |
162 | set_irq_type(AU1500_GPIO_201, IRQF_TRIGGER_LOW); | 162 | set_irq_type(AU1500_GPIO201_INT, IRQF_TRIGGER_LOW); |
163 | set_irq_type(AU1500_GPIO_202, IRQF_TRIGGER_LOW); | 163 | set_irq_type(AU1500_GPIO202_INT, IRQF_TRIGGER_LOW); |
164 | set_irq_type(AU1500_GPIO_203, IRQF_TRIGGER_LOW); | 164 | set_irq_type(AU1500_GPIO203_INT, IRQF_TRIGGER_LOW); |
165 | set_irq_type(AU1500_GPIO_205, IRQF_TRIGGER_LOW); | 165 | set_irq_type(AU1500_GPIO205_INT, IRQF_TRIGGER_LOW); |
166 | 166 | ||
167 | return 0; | 167 | return 0; |
168 | } | 168 | } |
diff --git a/arch/mips/alchemy/devboards/pb1500/platform.c b/arch/mips/alchemy/devboards/pb1500/platform.c index 6c00cbe529a2..cdce775e2131 100644 --- a/arch/mips/alchemy/devboards/pb1500/platform.c +++ b/arch/mips/alchemy/devboards/pb1500/platform.c | |||
@@ -32,9 +32,9 @@ static int __init pb1500_dev_init(void) | |||
32 | PCMCIA_MEM_PSEUDO_PHYS + 0x00040000 - 1, | 32 | PCMCIA_MEM_PSEUDO_PHYS + 0x00040000 - 1, |
33 | PCMCIA_IO_PSEUDO_PHYS, | 33 | PCMCIA_IO_PSEUDO_PHYS, |
34 | PCMCIA_IO_PSEUDO_PHYS + 0x00001000 - 1, | 34 | PCMCIA_IO_PSEUDO_PHYS + 0x00001000 - 1, |
35 | AU1000_GPIO_11, /* card */ | 35 | AU1500_GPIO11_INT, /* card */ |
36 | AU1000_GPIO_9, /* insert */ | 36 | AU1500_GPIO9_INT, /* insert */ |
37 | /*AU1000_GPIO_10*/0, /* stschg */ | 37 | /*AU1500_GPIO10_INT*/0, /* stschg */ |
38 | 0, /* eject */ | 38 | 0, /* eject */ |
39 | 0); /* id */ | 39 | 0); /* id */ |
40 | return 0; | 40 | return 0; |
diff --git a/arch/mips/alchemy/devboards/pb1550/board_setup.c b/arch/mips/alchemy/devboards/pb1550/board_setup.c index 64a6fc4f1751..bb41740fecf5 100644 --- a/arch/mips/alchemy/devboards/pb1550/board_setup.c +++ b/arch/mips/alchemy/devboards/pb1550/board_setup.c | |||
@@ -39,8 +39,8 @@ | |||
39 | 39 | ||
40 | 40 | ||
41 | char irq_tab_alchemy[][5] __initdata = { | 41 | char irq_tab_alchemy[][5] __initdata = { |
42 | [12] = { -1, INTB, INTC, INTD, INTA }, /* IDSEL 12 - PCI slot 2 (left) */ | 42 | [12] = { -1, AU1550_PCI_INTB, AU1550_PCI_INTC, AU1550_PCI_INTD, AU1550_PCI_INTA }, /* IDSEL 12 - PCI slot 2 (left) */ |
43 | [13] = { -1, INTA, INTB, INTC, INTD }, /* IDSEL 13 - PCI slot 1 (right) */ | 43 | [13] = { -1, AU1550_PCI_INTA, AU1550_PCI_INTB, AU1550_PCI_INTC, AU1550_PCI_INTD }, /* IDSEL 13 - PCI slot 1 (right) */ |
44 | }; | 44 | }; |
45 | 45 | ||
46 | const char *get_system_type(void) | 46 | const char *get_system_type(void) |
@@ -89,9 +89,9 @@ void __init board_setup(void) | |||
89 | 89 | ||
90 | static int __init pb1550_init_irq(void) | 90 | static int __init pb1550_init_irq(void) |
91 | { | 91 | { |
92 | set_irq_type(AU1000_GPIO_0, IRQF_TRIGGER_LOW); | 92 | set_irq_type(AU1550_GPIO0_INT, IRQF_TRIGGER_LOW); |
93 | set_irq_type(AU1000_GPIO_1, IRQF_TRIGGER_LOW); | 93 | set_irq_type(AU1550_GPIO1_INT, IRQF_TRIGGER_LOW); |
94 | set_irq_type(AU1500_GPIO_201_205, IRQF_TRIGGER_HIGH); | 94 | set_irq_type(AU1550_GPIO201_205_INT, IRQF_TRIGGER_HIGH); |
95 | 95 | ||
96 | /* enable both PCMCIA card irqs in the shared line */ | 96 | /* enable both PCMCIA card irqs in the shared line */ |
97 | alchemy_gpio2_enable_int(201); | 97 | alchemy_gpio2_enable_int(201); |
diff --git a/arch/mips/alchemy/devboards/pb1550/platform.c b/arch/mips/alchemy/devboards/pb1550/platform.c index aa5016c2e868..b496fb6de231 100644 --- a/arch/mips/alchemy/devboards/pb1550/platform.c +++ b/arch/mips/alchemy/devboards/pb1550/platform.c | |||
@@ -40,8 +40,8 @@ static int __init pb1550_dev_init(void) | |||
40 | PCMCIA_MEM_PSEUDO_PHYS + 0x00040000 - 1, | 40 | PCMCIA_MEM_PSEUDO_PHYS + 0x00040000 - 1, |
41 | PCMCIA_IO_PSEUDO_PHYS, | 41 | PCMCIA_IO_PSEUDO_PHYS, |
42 | PCMCIA_IO_PSEUDO_PHYS + 0x00001000 - 1, | 42 | PCMCIA_IO_PSEUDO_PHYS + 0x00001000 - 1, |
43 | AU1500_GPIO_201_205, | 43 | AU1550_GPIO201_205_INT, |
44 | AU1000_GPIO_0, | 44 | AU1550_GPIO0_INT, |
45 | 0, | 45 | 0, |
46 | 0, | 46 | 0, |
47 | 0); | 47 | 0); |
@@ -52,8 +52,8 @@ static int __init pb1550_dev_init(void) | |||
52 | PCMCIA_MEM_PSEUDO_PHYS + 0x00840000 - 1, | 52 | PCMCIA_MEM_PSEUDO_PHYS + 0x00840000 - 1, |
53 | PCMCIA_IO_PSEUDO_PHYS + 0x00800000, | 53 | PCMCIA_IO_PSEUDO_PHYS + 0x00800000, |
54 | PCMCIA_IO_PSEUDO_PHYS + 0x00801000 - 1, | 54 | PCMCIA_IO_PSEUDO_PHYS + 0x00801000 - 1, |
55 | AU1500_GPIO_201_205, | 55 | AU1550_GPIO201_205_INT, |
56 | AU1000_GPIO_1, | 56 | AU1550_GPIO1_INT, |
57 | 0, | 57 | 0, |
58 | 0, | 58 | 0, |
59 | 1); | 59 | 1); |
diff --git a/arch/mips/alchemy/mtx-1/board_setup.c b/arch/mips/alchemy/mtx-1/board_setup.c index da1e36626713..13577eec8b44 100644 --- a/arch/mips/alchemy/mtx-1/board_setup.c +++ b/arch/mips/alchemy/mtx-1/board_setup.c | |||
@@ -37,14 +37,14 @@ | |||
37 | #include <prom.h> | 37 | #include <prom.h> |
38 | 38 | ||
39 | char irq_tab_alchemy[][5] __initdata = { | 39 | char irq_tab_alchemy[][5] __initdata = { |
40 | [0] = { -1, INTA, INTA, INTX, INTX }, /* IDSEL 00 - AdapterA-Slot0 (top) */ | 40 | [0] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTA, 0xff, 0xff }, /* IDSEL 00 - AdapterA-Slot0 (top) */ |
41 | [1] = { -1, INTB, INTA, INTX, INTX }, /* IDSEL 01 - AdapterA-Slot1 (bottom) */ | 41 | [1] = { -1, AU1500_PCI_INTB, AU1500_PCI_INTA, 0xff, 0xff }, /* IDSEL 01 - AdapterA-Slot1 (bottom) */ |
42 | [2] = { -1, INTC, INTD, INTX, INTX }, /* IDSEL 02 - AdapterB-Slot0 (top) */ | 42 | [2] = { -1, AU1500_PCI_INTC, AU1500_PCI_INTD, 0xff, 0xff }, /* IDSEL 02 - AdapterB-Slot0 (top) */ |
43 | [3] = { -1, INTD, INTC, INTX, INTX }, /* IDSEL 03 - AdapterB-Slot1 (bottom) */ | 43 | [3] = { -1, AU1500_PCI_INTD, AU1500_PCI_INTC, 0xff, 0xff }, /* IDSEL 03 - AdapterB-Slot1 (bottom) */ |
44 | [4] = { -1, INTA, INTB, INTX, INTX }, /* IDSEL 04 - AdapterC-Slot0 (top) */ | 44 | [4] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, 0xff, 0xff }, /* IDSEL 04 - AdapterC-Slot0 (top) */ |
45 | [5] = { -1, INTB, INTA, INTX, INTX }, /* IDSEL 05 - AdapterC-Slot1 (bottom) */ | 45 | [5] = { -1, AU1500_PCI_INTB, AU1500_PCI_INTA, 0xff, 0xff }, /* IDSEL 05 - AdapterC-Slot1 (bottom) */ |
46 | [6] = { -1, INTC, INTD, INTX, INTX }, /* IDSEL 06 - AdapterD-Slot0 (top) */ | 46 | [6] = { -1, AU1500_PCI_INTC, AU1500_PCI_INTD, 0xff, 0xff }, /* IDSEL 06 - AdapterD-Slot0 (top) */ |
47 | [7] = { -1, INTD, INTC, INTX, INTX }, /* IDSEL 07 - AdapterD-Slot1 (bottom) */ | 47 | [7] = { -1, AU1500_PCI_INTD, AU1500_PCI_INTC, 0xff, 0xff }, /* IDSEL 07 - AdapterD-Slot1 (bottom) */ |
48 | }; | 48 | }; |
49 | 49 | ||
50 | extern int (*board_pci_idsel)(unsigned int devsel, int assert); | 50 | extern int (*board_pci_idsel)(unsigned int devsel, int assert); |
@@ -124,11 +124,11 @@ mtx1_pci_idsel(unsigned int devsel, int assert) | |||
124 | 124 | ||
125 | static int __init mtx1_init_irq(void) | 125 | static int __init mtx1_init_irq(void) |
126 | { | 126 | { |
127 | set_irq_type(AU1500_GPIO_204, IRQF_TRIGGER_HIGH); | 127 | set_irq_type(AU1500_GPIO204_INT, IRQF_TRIGGER_HIGH); |
128 | set_irq_type(AU1500_GPIO_201, IRQF_TRIGGER_LOW); | 128 | set_irq_type(AU1500_GPIO201_INT, IRQF_TRIGGER_LOW); |
129 | set_irq_type(AU1500_GPIO_202, IRQF_TRIGGER_LOW); | 129 | set_irq_type(AU1500_GPIO202_INT, IRQF_TRIGGER_LOW); |
130 | set_irq_type(AU1500_GPIO_203, IRQF_TRIGGER_LOW); | 130 | set_irq_type(AU1500_GPIO203_INT, IRQF_TRIGGER_LOW); |
131 | set_irq_type(AU1500_GPIO_205, IRQF_TRIGGER_LOW); | 131 | set_irq_type(AU1500_GPIO205_INT, IRQF_TRIGGER_LOW); |
132 | 132 | ||
133 | return 0; | 133 | return 0; |
134 | } | 134 | } |
diff --git a/arch/mips/alchemy/xxs1500/board_setup.c b/arch/mips/alchemy/xxs1500/board_setup.c index eb31350d9772..21bef8dc0883 100644 --- a/arch/mips/alchemy/xxs1500/board_setup.c +++ b/arch/mips/alchemy/xxs1500/board_setup.c | |||
@@ -80,19 +80,19 @@ void __init board_setup(void) | |||
80 | 80 | ||
81 | static int __init xxs1500_init_irq(void) | 81 | static int __init xxs1500_init_irq(void) |
82 | { | 82 | { |
83 | set_irq_type(AU1500_GPIO_204, IRQF_TRIGGER_HIGH); | 83 | set_irq_type(AU1500_GPIO204_INT, IRQF_TRIGGER_HIGH); |
84 | set_irq_type(AU1500_GPIO_201, IRQF_TRIGGER_LOW); | 84 | set_irq_type(AU1500_GPIO201_INT, IRQF_TRIGGER_LOW); |
85 | set_irq_type(AU1500_GPIO_202, IRQF_TRIGGER_LOW); | 85 | set_irq_type(AU1500_GPIO202_INT, IRQF_TRIGGER_LOW); |
86 | set_irq_type(AU1500_GPIO_203, IRQF_TRIGGER_LOW); | 86 | set_irq_type(AU1500_GPIO203_INT, IRQF_TRIGGER_LOW); |
87 | set_irq_type(AU1500_GPIO_205, IRQF_TRIGGER_LOW); | 87 | set_irq_type(AU1500_GPIO205_INT, IRQF_TRIGGER_LOW); |
88 | set_irq_type(AU1500_GPIO_207, IRQF_TRIGGER_LOW); | 88 | set_irq_type(AU1500_GPIO207_INT, IRQF_TRIGGER_LOW); |
89 | 89 | ||
90 | set_irq_type(AU1000_GPIO_0, IRQF_TRIGGER_LOW); | 90 | set_irq_type(AU1500_GPIO0_INT, IRQF_TRIGGER_LOW); |
91 | set_irq_type(AU1000_GPIO_1, IRQF_TRIGGER_LOW); | 91 | set_irq_type(AU1500_GPIO1_INT, IRQF_TRIGGER_LOW); |
92 | set_irq_type(AU1000_GPIO_2, IRQF_TRIGGER_LOW); | 92 | set_irq_type(AU1500_GPIO2_INT, IRQF_TRIGGER_LOW); |
93 | set_irq_type(AU1000_GPIO_3, IRQF_TRIGGER_LOW); | 93 | set_irq_type(AU1500_GPIO3_INT, IRQF_TRIGGER_LOW); |
94 | set_irq_type(AU1000_GPIO_4, IRQF_TRIGGER_LOW); /* CF interrupt */ | 94 | set_irq_type(AU1500_GPIO4_INT, IRQF_TRIGGER_LOW); /* CF irq */ |
95 | set_irq_type(AU1000_GPIO_5, IRQF_TRIGGER_LOW); | 95 | set_irq_type(AU1500_GPIO5_INT, IRQF_TRIGGER_LOW); |
96 | 96 | ||
97 | return 0; | 97 | return 0; |
98 | } | 98 | } |