microblaze: remove early_init_dt_scan_cpus() and phyp_dump_*()

Microblaze only has one CPU, it isn't SMP at all.  early_init_dt_scan_cpus()
is effectively just a no-op, so remove it.

Microblaze doesn't support hypervisor assisted dump either, so the phyp stuff
can also go.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Michal Simek <monstr@monstr.eu>

1 files changed, 0 insertions, 153 deletions

diff --git a/arch/microblaze/kernel/prom.c b/arch/microblaze/kernel/prom.c
index 6eff83a71218..cd158ef5b583 100644
--- a/arch/microblaze/kernel/prom.c
+++ b/arch/microblaze/kernel/prom.c
@@ -47,67 +47,6 @@ struct device_node *of_chosen;
 
 #define early_init_dt_scan_drconf_memory(node) 0
 
-static int __init early_init_dt_scan_cpus(unsigned long node,
-                                          const char *uname, int depth,
-                                          void *data)
-{
-        static int logical_cpuid;
-        char *type = of_get_flat_dt_prop(node, "device_type", NULL);
-        const u32 *intserv;
-        int i, nthreads;
-        int found = 0;
-
-        /* We are scanning "cpu" nodes only */
-        if (type == NULL || strcmp(type, "cpu") != 0)
-                return 0;
-
-        /* Get physical cpuid */
-        intserv = of_get_flat_dt_prop(node, "reg", NULL);
-        nthreads = 1;
-
-        /*
-         * Now see if any of these threads match our boot cpu.
-         * NOTE: This must match the parsing done in smp_setup_cpu_maps.
-         */
-        for (i = 0; i < nthreads; i++) {
-                /*
-                 * version 2 of the kexec param format adds the phys cpuid of
-                 * booted proc.
-                 */
-                if (initial_boot_params && initial_boot_params->version >= 2) {
-                        if (intserv[i] ==
-                                        initial_boot_params->boot_cpuid_phys) {
-                                found = 1;
-                                break;
-                        }
-                } else {
-                        /*
-                         * Check if it's the boot-cpu, set it's hw index now,
-                         * unfortunately this format did not support booting
-                         * off secondary threads.
-                         */
-                        if (of_get_flat_dt_prop(node,
-                                        "linux,boot-cpu", NULL) != NULL) {
-                                found = 1;
-                                break;
-                        }
-                }
-
-#ifdef CONFIG_SMP
-                /* logical cpu id is always 0 on UP kernels */
-                logical_cpuid++;
-#endif
-        }
-
-        if (found) {
-                pr_debug("boot cpu: logical %d physical %d\n", logical_cpuid,
-                        intserv[i]);
-                boot_cpuid = logical_cpuid;
-        }
-
-        return 0;
-}
-
 void __init early_init_dt_scan_chosen_arch(unsigned long node)
 {
         /* No Microblaze specific code here */
@@ -163,86 +102,6 @@ static int __init early_init_dt_scan_memory(unsigned long node,
         return 0;
 }
 
-#ifdef CONFIG_PHYP_DUMP
-/**
- * phyp_dump_calculate_reserve_size() - reserve variable boot area 5% or arg
- *
- * Function to find the largest size we need to reserve
- * during early boot process.
- *
- * It either looks for boot param and returns that OR
- * returns larger of 256 or 5% rounded down to multiples of 256MB.
- *
- */
-static inline unsigned long phyp_dump_calculate_reserve_size(void)
-{
-        unsigned long tmp;
-
-        if (phyp_dump_info->reserve_bootvar)
-                return phyp_dump_info->reserve_bootvar;
-
-        /* divide by 20 to get 5% of value */
-        tmp = lmb_end_of_DRAM();
-        do_div(tmp, 20);
-
-        /* round it down in multiples of 256 */
-        tmp = tmp & ~0x0FFFFFFFUL;
-
-        return (tmp > PHYP_DUMP_RMR_END ? tmp : PHYP_DUMP_RMR_END);
-}
-
-/**
- * phyp_dump_reserve_mem() - reserve all not-yet-dumped mmemory
- *
- * This routine may reserve memory regions in the kernel only
- * if the system is supported and a dump was taken in last
- * boot instance or if the hardware is supported and the
- * scratch area needs to be setup. In other instances it returns
- * without reserving anything. The memory in case of dump being
- * active is freed when the dump is collected (by userland tools).
- */
-static void __init phyp_dump_reserve_mem(void)
-{
-        unsigned long base, size;
-        unsigned long variable_reserve_size;
-
-        if (!phyp_dump_info->phyp_dump_configured) {
-                printk(KERN_ERR "Phyp-dump not supported on this hardware\n");
-                return;
-        }
-
-        if (!phyp_dump_info->phyp_dump_at_boot) {
-                printk(KERN_INFO "Phyp-dump disabled at boot time\n");
-                return;
-        }
-
-        variable_reserve_size = phyp_dump_calculate_reserve_size();
-
-        if (phyp_dump_info->phyp_dump_is_active) {
-                /* Reserve *everything* above RMR.Area freed by userland tools*/
-                base = variable_reserve_size;
-                size = lmb_end_of_DRAM() - base;
-
-                /* XXX crashed_ram_end is wrong, since it may be beyond
-                 * the memory_limit, it will need to be adjusted. */
-                lmb_reserve(base, size);
-
-                phyp_dump_info->init_reserve_start = base;
-                phyp_dump_info->init_reserve_size = size;
-        } else {
-                size = phyp_dump_info->cpu_state_size +
-                        phyp_dump_info->hpte_region_size +
-                        variable_reserve_size;
-                base = lmb_end_of_DRAM() - size;
-                lmb_reserve(base, size);
-                phyp_dump_info->init_reserve_start = base;
-                phyp_dump_info->init_reserve_size = size;
-        }
-}
-#else
-static inline void __init phyp_dump_reserve_mem(void) {}
-#endif /* CONFIG_PHYP_DUMP  && CONFIG_PPC_RTAS */
-
 #ifdef CONFIG_EARLY_PRINTK
 /* MS this is Microblaze specifig function */
 static int __init early_init_dt_scan_serial(unsigned long node,
@@ -284,11 +143,6 @@ void __init early_init_devtree(void *params)
         /* Setup flat device-tree pointer */
         initial_boot_params = params;
 
-#ifdef CONFIG_PHYP_DUMP
-        /* scan tree to see if dump occured during last boot */
-        of_scan_flat_dt(early_init_dt_scan_phyp_dump, NULL);
-#endif
-
         /* Retrieve various informations from the /chosen node of the
          * device-tree, including the platform type, initrd location and
          * size, TCE reserve, and more ...
@@ -308,13 +162,6 @@ void __init early_init_devtree(void *params)
 
         pr_debug("Phys. mem: %lx\n", (unsigned long) lmb_phys_mem_size());
 
-        pr_debug("Scanning CPUs ...\n");
-
-        /* Retreive CPU related informations from the flat tree
-         * (altivec support, boot CPU ID, ...)
-         */
-        of_scan_flat_dt(early_init_dt_scan_cpus, NULL);
-
         pr_debug(" <- early_init_devtree()\n");
 }