microblaze_mmu_v2: MMU initialization

Signed-off-by: Michal Simek <monstr@monstr.eu>

1 files changed, 154 insertions, 4 deletions

diff --git a/arch/microblaze/mm/init.c b/arch/microblaze/mm/init.c
index af789e26a7ce..b5a701cd71e0 100644
--- a/arch/microblaze/mm/init.c
+++ b/arch/microblaze/mm/init.c
@@ -23,18 +23,26 @@
 #include <asm/sections.h>
 #include <asm/tlb.h>
 
+#ifndef CONFIG_MMU
 unsigned int __page_offset;
 EXPORT_SYMBOL(__page_offset);
 
+#else
+DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
+
+int mem_init_done;
+static int init_bootmem_done;
+#endif /* CONFIG_MMU */
+
 char *klimit = _end;
 
 /*
  * Initialize the bootmem system and give it all the memory we
  * have available.
  */
-unsigned int memory_start;
-unsigned int memory_end; /* due to mm/nommu.c */
-unsigned int memory_size;
+unsigned long memory_start;
+unsigned long memory_end; /* due to mm/nommu.c */
+unsigned long memory_size;
 
 /*
  * paging_init() sets up the page tables - in fact we've already done this.
@@ -59,6 +67,7 @@ void __init setup_memory(void)
 {
         int i;
         unsigned long map_size;
+#ifndef CONFIG_MMU
         u32 kernel_align_start, kernel_align_size;
 
         /* Find main memory where is the kernel */
@@ -91,6 +100,7 @@ void __init setup_memory(void)
                 __func__, kernel_align_start, kernel_align_start
                         + kernel_align_size, kernel_align_size);
 
+#endif
         /*
          * Kernel:
          * start: base phys address of kernel - page align
@@ -119,9 +129,13 @@ void __init setup_memory(void)
          * for 4GB of memory, using 4kB pages), plus 1 page
          * (in case the address isn't page-aligned).
          */
+#ifndef CONFIG_MMU
         map_size = init_bootmem_node(NODE_DATA(0), PFN_UP(TOPHYS((u32)_end)),
                                         min_low_pfn, max_low_pfn);
-
+#else
+        map_size = init_bootmem_node(&contig_page_data,
+                PFN_UP(TOPHYS((u32)_end)), min_low_pfn, max_low_pfn);
+#endif
         lmb_reserve(PFN_UP(TOPHYS((u32)_end)) << PAGE_SHIFT, map_size);
 
         /* free bootmem is whole main memory */
@@ -135,6 +149,9 @@ void __init setup_memory(void)
                 reserve_bootmem(lmb.reserved.region[i].base,
                         lmb_size_bytes(&lmb.reserved, i) - 1, BOOTMEM_DEFAULT);
         }
+#ifdef CONFIG_MMU
+        init_bootmem_done = 1;
+#endif
         paging_init();
 }
 
@@ -189,8 +206,12 @@ void __init mem_init(void)
         printk(KERN_INFO "Memory: %luk/%luk available\n",
                (unsigned long) nr_free_pages() << (PAGE_SHIFT-10),
                num_physpages << (PAGE_SHIFT-10));
+#ifdef CONFIG_MMU
+        mem_init_done = 1;
+#endif
 }
 
+#ifndef CONFIG_MMU
 /* Check against bounds of physical memory */
 int ___range_ok(unsigned long addr, unsigned long size)
 {
@@ -198,3 +219,132 @@ int ___range_ok(unsigned long addr, unsigned long size)
                 ((addr + size) > memory_end));
 }
 EXPORT_SYMBOL(___range_ok);
+
+#else
+int page_is_ram(unsigned long pfn)
+{
+        return pfn < max_low_pfn;
+}
+
+/*
+ * Check for command-line options that affect what MMU_init will do.
+ */
+static void mm_cmdline_setup(void)
+{
+        unsigned long maxmem = 0;
+        char *p = cmd_line;
+
+        /* Look for mem= option on command line */
+        p = strstr(cmd_line, "mem=");
+        if (p) {
+                p += 4;
+                maxmem = memparse(p, &p);
+                if (maxmem && memory_size > maxmem) {
+                        memory_size = maxmem;
+                        memory_end = memory_start + memory_size;
+                        lmb.memory.region[0].size = memory_size;
+                }
+        }
+}
+
+/*
+ * MMU_init_hw does the chip-specific initialization of the MMU hardware.
+ */
+static void __init mmu_init_hw(void)
+{
+        /*
+         * The Zone Protection Register (ZPR) defines how protection will
+         * be applied to every page which is a member of a given zone. At
+         * present, we utilize only two of the zones.
+         * The zone index bits (of ZSEL) in the PTE are used for software
+         * indicators, except the LSB.  For user access, zone 1 is used,
+         * for kernel access, zone 0 is used.  We set all but zone 1
+         * to zero, allowing only kernel access as indicated in the PTE.
+         * For zone 1, we set a 01 binary (a value of 10 will not work)
+         * to allow user access as indicated in the PTE.  This also allows
+         * kernel access as indicated in the PTE.
+         */
+        __asm__ __volatile__ ("ori r11, r0, 0x10000000;" \
+                        "mts rzpr, r11;"
+                        : : : "r11");
+}
+
+/*
+ * MMU_init sets up the basic memory mappings for the kernel,
+ * including both RAM and possibly some I/O regions,
+ * and sets up the page tables and the MMU hardware ready to go.
+ */
+
+/* called from head.S */
+asmlinkage void __init mmu_init(void)
+{
+        unsigned int kstart, ksize;
+
+        if (!lmb.reserved.cnt) {
+                printk(KERN_EMERG "Error memory count\n");
+                machine_restart(NULL);
+        }
+
+        if ((u32) lmb.memory.region[0].size < 0x1000000) {
+                printk(KERN_EMERG "Memory must be greater than 16MB\n");
+                machine_restart(NULL);
+        }
+        /* Find main memory where the kernel is */
+        memory_start = (u32) lmb.memory.region[0].base;
+        memory_end = (u32) lmb.memory.region[0].base +
+                                (u32) lmb.memory.region[0].size;
+        memory_size = memory_end - memory_start;
+
+        mm_cmdline_setup(); /* FIXME parse args from command line - not used */
+
+        /*
+         * Map out the kernel text/data/bss from the available physical
+         * memory.
+         */
+        kstart = __pa(CONFIG_KERNEL_START); /* kernel start */
+        /* kernel size */
+        ksize = PAGE_ALIGN(((u32)_end - (u32)CONFIG_KERNEL_START));
+        lmb_reserve(kstart, ksize);
+
+#if defined(CONFIG_BLK_DEV_INITRD)
+        /* Remove the init RAM disk from the available memory. */
+/*      if (initrd_start) {
+                mem_pieces_remove(&phys_avail, __pa(initrd_start),
+                                  initrd_end - initrd_start, 1);
+        }*/
+#endif /* CONFIG_BLK_DEV_INITRD */
+
+        /* Initialize the MMU hardware */
+        mmu_init_hw();
+
+        /* Map in all of RAM starting at CONFIG_KERNEL_START */
+        mapin_ram();
+
+#ifdef HIGHMEM_START_BOOL
+        ioremap_base = HIGHMEM_START;
+#else
+        ioremap_base = 0xfe000000UL;    /* for now, could be 0xfffff000 */
+#endif /* CONFIG_HIGHMEM */
+        ioremap_bot = ioremap_base;
+
+        /* Initialize the context management stuff */
+        mmu_context_init();
+}
+
+/* This is only called until mem_init is done. */
+void __init *early_get_page(void)
+{
+        void *p;
+        if (init_bootmem_done) {
+                p = alloc_bootmem_pages(PAGE_SIZE);
+        } else {
+                /*
+                 * Mem start + 32MB -> here is limit
+                 * because of mem mapping from head.S
+                 */
+                p = __va(lmb_alloc_base(PAGE_SIZE, PAGE_SIZE,
+                                        memory_start + 0x2000000));
+        }
+        return p;
+}
+#endif /* CONFIG_MMU */