m68knommu: remove use of MBAR value for ColdFire 528x peripheral addressing

The ColdFire 528x family of CPUs does not have an MBAR register, so don't
define its peripheral addresses relative to one. Its internal peripherals
are relative to the IPSBAR register, so make sure to use that.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>

1 files changed, 7 insertions, 7 deletions

diff --git a/arch/m68knommu/platform/528x/config.c b/arch/m68knommu/platform/528x/config.c
index 76b743343bfa..ac39fc661219 100644
--- a/arch/m68knommu/platform/528x/config.c
+++ b/arch/m68knommu/platform/528x/config.c
@@ -29,15 +29,15 @@
 
 static struct mcf_platform_uart m528x_uart_platform[] = {
         {
-                .mapbase        = MCF_MBAR + MCFUART_BASE1,
+                .mapbase        = MCFUART_BASE1,
                 .irq            = MCFINT_VECBASE + MCFINT_UART0,
         },
         {
-                .mapbase        = MCF_MBAR + MCFUART_BASE2,
+                .mapbase        = MCFUART_BASE2,
                 .irq            = MCFINT_VECBASE + MCFINT_UART0 + 1,
         },
         {
-                .mapbase        = MCF_MBAR + MCFUART_BASE3,
+                .mapbase        = MCFUART_BASE3,
                 .irq            = MCFINT_VECBASE + MCFINT_UART0 + 2,
         },
         { },
@@ -51,8 +51,8 @@ static struct platform_device m528x_uart = {
 
 static struct resource m528x_fec_resources[] = {
         {
-                .start          = MCF_MBAR + 0x1000,
-                .end            = MCF_MBAR + 0x1000 + 0x7ff,
+                .start          = MCFFEC_BASE,
+                .end            = MCFFEC_BASE + MCFFEC_SIZE - 1,
                 .flags          = IORESOURCE_MEM,
         },
         {
@@ -227,9 +227,9 @@ static void __init m528x_uart_init_line(int line, int irq)
 
         /* make sure PUAPAR is set for UART0 and UART1 */
         if (line < 2) {
-                port = readb(MCF_MBAR + MCF5282_GPIO_PUAPAR);
+                port = readb(MCF5282_GPIO_PUAPAR);
                 port |= (0x03 << (line * 2));
-                writeb(port, MCF_MBAR + MCF5282_GPIO_PUAPAR);
+                writeb(port, MCF5282_GPIO_PUAPAR);
         }
 }