[PATCH] m68knommu: remove DrangonEngine2 specific config code

Remove DragonEngine2 specific config code. Use common 68VZ328 config
code now.

Signed-off-by: Greg Ungerer <gerg@uclinux.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

1 files changed, 0 insertions, 191 deletions

diff --git a/arch/m68knommu/platform/68VZ328/de2/config.c b/arch/m68knommu/platform/68VZ328/de2/config.c
deleted file mode 100644
index d0586197f113..000000000000
--- a/arch/m68knommu/platform/68VZ328/de2/config.c
+++ /dev/null
@@ -1,191 +0,0 @@
-/*
- *  linux/arch/m68knommu/platform/MC68VZ328/de2/config.c
- *
- *  Copyright (C) 1993 Hamish Macdonald
- *  Copyright (C) 1999 D. Jeff Dionne
- *  Copyright (C) 2001 Georges Menie, Ken Desmet
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file COPYING in the main directory of this archive
- * for more details.
- */
-
-#include <linux/config.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/tty.h>
-#include <linux/console.h>
-#include <linux/kd.h>
-#include <linux/netdevice.h>
-
-#include <asm/setup.h>
-#include <asm/system.h>
-#include <asm/pgtable.h>
-#include <asm/irq.h>
-#include <asm/machdep.h>
-#include <asm/MC68VZ328.h>
-
-#ifdef CONFIG_INIT_LCD
-#include "screen.h"
-#endif
-
-/* with a 33.16 MHz clock, this will give usec resolution to the time functions */
-#define CLOCK_SOURCE TCTL_CLKSOURCE_SYSCLK
-#define CLOCK_PRE 7
-#define TICKS_PER_JIFFY 41450
-
-static void
-dragen2_sched_init(irqreturn_t (*timer_routine) (int, void *, struct pt_regs *))
-{
-        /* disable timer 1 */
-        TCTL = 0;
-
-        /* set ISR */
-        if (request_irq(TMR_IRQ_NUM, timer_routine, IRQ_FLG_LOCK, "timer", NULL)) 
-                panic("Unable to attach timer interrupt\n");
-
-        /* Restart mode, Enable int, Set clock source */
-        TCTL = TCTL_OM | TCTL_IRQEN | CLOCK_SOURCE;
-        TPRER = CLOCK_PRE;
-        TCMP = TICKS_PER_JIFFY;
-
-        /* Enable timer 1 */
-        TCTL |= TCTL_TEN;
-}
-
-static void dragen2_tick(void)
-{
-        /* Reset Timer1 */
-        TSTAT &= 0;
-}
-
-static unsigned long dragen2_gettimeoffset(void)
-{
-        unsigned long ticks = TCN, offset = 0;
-
-        /* check for pending interrupt */
-        if (ticks < (TICKS_PER_JIFFY >> 1) && (ISR & (1 << TMR_IRQ_NUM)))
-                offset = 1000000 / HZ;
-
-        ticks = (ticks * 1000000 / HZ) / TICKS_PER_JIFFY;
-
-        return ticks + offset;
-}
-
-static void dragen2_gettod(int *year, int *mon, int *day, int *hour,
-                                                   int *min, int *sec)
-{
-        long now = RTCTIME;
-
-        *year = *mon = *day = 1;
-        *hour = (now >> 24) % 24;
-        *min = (now >> 16) % 60;
-        *sec = now % 60;
-}
-
-static void dragen2_reset(void)
-{
-        local_irq_disable();
-
-#ifdef CONFIG_INIT_LCD
-        PBDATA |= 0x20;                         /* disable CCFL light */
-        PKDATA |= 0x4;                          /* disable LCD controller */
-        LCKCON = 0;
-#endif
-
-        __asm__ __volatile__(
-                "reset\n\t"
-                "moveal #0x04000000, %a0\n\t"
-                "moveal 0(%a0), %sp\n\t"
-                "moveal 4(%a0), %a0\n\t"
-                "jmp (%a0)"
-        );
-}
-
-static void init_hardware(void)
-{
-#ifdef CONFIG_DIRECT_IO_ACCESS
-        SCR = 0x10;                                     /* allow user access to internal registers */
-#endif
-
-        /* CSGB Init */
-        CSGBB = 0x4000;
-        CSB = 0x1a1;
-
-        /* CS8900 init */
-        /* PK3: hardware sleep function pin, active low */
-        PKSEL |= PK(3);                         /* select pin as I/O */
-        PKDIR |= PK(3);                         /* select pin as output */
-        PKDATA |= PK(3);                        /* set pin high */
-
-        /* PF5: hardware reset function pin, active high */
-        PFSEL |= PF(5);                         /* select pin as I/O */
-        PFDIR |= PF(5);                         /* select pin as output */
-        PFDATA &= ~PF(5);                       /* set pin low */
-
-        /* cs8900 hardware reset */
-        PFDATA |= PF(5);
-        { int i; for (i = 0; i < 32000; ++i); }
-        PFDATA &= ~PF(5);
-
-        /* INT1 enable (cs8900 IRQ) */
-        PDPOL &= ~PD(1);                        /* active high signal */
-        PDIQEG &= ~PD(1);
-        PDIRQEN |= PD(1);                       /* IRQ enabled */
-
-#ifdef CONFIG_68328_SERIAL_UART2
-        /* Enable RXD TXD port bits to enable UART2 */
-        PJSEL &= ~(PJ(5) | PJ(4));
-#endif
-
-#ifdef CONFIG_INIT_LCD
-        /* initialize LCD controller */
-        LSSA = (long) screen_bits;
-        LVPW = 0x14;
-        LXMAX = 0x140;
-        LYMAX = 0xef;
-        LRRA = 0;
-        LPXCD = 3;
-        LPICF = 0x08;
-        LPOLCF = 0;
-        LCKCON = 0x80;
-        PCPDEN = 0xff;
-        PCSEL = 0;
-
-        /* Enable LCD controller */
-        PKDIR |= 0x4;
-        PKSEL |= 0x4;
-        PKDATA &= ~0x4;
-
-        /* Enable CCFL backlighting circuit */
-        PBDIR |= 0x20;
-        PBSEL |= 0x20;
-        PBDATA &= ~0x20;
-
-        /* contrast control register */
-        PFDIR |= 0x1;
-        PFSEL &= ~0x1;
-        PWMR = 0x037F;
-#endif
-}
-
-void config_BSP(char *command, int size)
-{
-        printk(KERN_INFO "68VZ328 DragonBallVZ support (c) 2001 Lineo, Inc.\n");
-
-#if defined(CONFIG_BOOTPARAM)
-        strncpy(command, CONFIG_BOOTPARAM_STRING, size);
-        command[size-1] = 0;
-#else
-        memset(command, 0, size);
-#endif
-
-        init_hardware();
-
-        mach_sched_init = (void *)dragen2_sched_init;
-        mach_tick = dragen2_tick;
-        mach_gettimeoffset = dragen2_gettimeoffset;
-        mach_reset = dragen2_reset;
-        mach_gettod = dragen2_gettod;
-}