aboutsummaryrefslogtreecommitdiffstats
path: root/arch/i386
diff options
context:
space:
mode:
authorThomas Gleixner <tglx@linutronix.de>2007-10-11 05:16:36 -0400
committerThomas Gleixner <tglx@linutronix.de>2007-10-11 05:16:36 -0400
commitfb9aa6f1d4a1e11e66a680460b2c2b2b10b62f79 (patch)
treee0ad51f39b48a342244cef62099bd1a8a93927db /arch/i386
parent4b60eb8380a0b588a03b6052d7ac93e1964c75b8 (diff)
i386: move pci
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
Diffstat (limited to 'arch/i386')
-rw-r--r--arch/i386/Makefile2
-rw-r--r--arch/i386/pci/Makefile5
-rw-r--r--arch/i386/pci/Makefile_3214
-rw-r--r--arch/i386/pci/acpi.c90
-rw-r--r--arch/i386/pci/common.c480
-rw-r--r--arch/i386/pci/direct.c302
-rw-r--r--arch/i386/pci/early.c59
-rw-r--r--arch/i386/pci/fixup.c446
-rw-r--r--arch/i386/pci/i386.c315
-rw-r--r--arch/i386/pci/init.c37
-rw-r--r--arch/i386/pci/irq.c1173
-rw-r--r--arch/i386/pci/legacy.c56
-rw-r--r--arch/i386/pci/mmconfig-shared.c315
-rw-r--r--arch/i386/pci/mmconfig_32.c148
-rw-r--r--arch/i386/pci/numa.c135
-rw-r--r--arch/i386/pci/pcbios.c492
-rw-r--r--arch/i386/pci/pci.h149
-rw-r--r--arch/i386/pci/visws.c111
18 files changed, 1 insertions, 4328 deletions
diff --git a/arch/i386/Makefile b/arch/i386/Makefile
index da64799484a7..87c959d5f354 100644
--- a/arch/i386/Makefile
+++ b/arch/i386/Makefile
@@ -107,7 +107,7 @@ core-y += arch/i386/kernel/ \
107 $(mcore-y)/ \ 107 $(mcore-y)/ \
108 arch/x86/crypto/ 108 arch/x86/crypto/
109drivers-$(CONFIG_MATH_EMULATION) += arch/x86/math-emu/ 109drivers-$(CONFIG_MATH_EMULATION) += arch/x86/math-emu/
110drivers-$(CONFIG_PCI) += arch/i386/pci/ 110drivers-$(CONFIG_PCI) += arch/x86/pci/
111# must be linked after kernel/ 111# must be linked after kernel/
112drivers-$(CONFIG_OPROFILE) += arch/i386/oprofile/ 112drivers-$(CONFIG_OPROFILE) += arch/i386/oprofile/
113drivers-$(CONFIG_PM) += arch/x86/power/ 113drivers-$(CONFIG_PM) += arch/x86/power/
diff --git a/arch/i386/pci/Makefile b/arch/i386/pci/Makefile
deleted file mode 100644
index d04d8f976d1c..000000000000
--- a/arch/i386/pci/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
1ifeq ($(CONFIG_X86_32),y)
2include ${srctree}/arch/i386/pci/Makefile_32
3else
4include ${srctree}/arch/x86_64/pci/Makefile_64
5endif
diff --git a/arch/i386/pci/Makefile_32 b/arch/i386/pci/Makefile_32
deleted file mode 100644
index cdd6828b5abb..000000000000
--- a/arch/i386/pci/Makefile_32
+++ /dev/null
@@ -1,14 +0,0 @@
1obj-y := i386.o init.o
2
3obj-$(CONFIG_PCI_BIOS) += pcbios.o
4obj-$(CONFIG_PCI_MMCONFIG) += mmconfig_32.o direct.o mmconfig-shared.o
5obj-$(CONFIG_PCI_DIRECT) += direct.o
6
7pci-y := fixup.o
8pci-$(CONFIG_ACPI) += acpi.o
9pci-y += legacy.o irq.o
10
11pci-$(CONFIG_X86_VISWS) := visws.o fixup.o
12pci-$(CONFIG_X86_NUMAQ) := numa.o irq.o
13
14obj-y += $(pci-y) common.o early.o
diff --git a/arch/i386/pci/acpi.c b/arch/i386/pci/acpi.c
deleted file mode 100644
index bc8a44bddaa7..000000000000
--- a/arch/i386/pci/acpi.c
+++ /dev/null
@@ -1,90 +0,0 @@
1#include <linux/pci.h>
2#include <linux/acpi.h>
3#include <linux/init.h>
4#include <linux/irq.h>
5#include <asm/numa.h>
6#include "pci.h"
7
8struct pci_bus * __devinit pci_acpi_scan_root(struct acpi_device *device, int domain, int busnum)
9{
10 struct pci_bus *bus;
11 struct pci_sysdata *sd;
12 int pxm;
13
14 /* Allocate per-root-bus (not per bus) arch-specific data.
15 * TODO: leak; this memory is never freed.
16 * It's arguable whether it's worth the trouble to care.
17 */
18 sd = kzalloc(sizeof(*sd), GFP_KERNEL);
19 if (!sd) {
20 printk(KERN_ERR "PCI: OOM, not probing PCI bus %02x\n", busnum);
21 return NULL;
22 }
23
24 if (domain != 0) {
25 printk(KERN_WARNING "PCI: Multiple domains not supported\n");
26 kfree(sd);
27 return NULL;
28 }
29
30 sd->node = -1;
31
32 pxm = acpi_get_pxm(device->handle);
33#ifdef CONFIG_ACPI_NUMA
34 if (pxm >= 0)
35 sd->node = pxm_to_node(pxm);
36#endif
37
38 bus = pci_scan_bus_parented(NULL, busnum, &pci_root_ops, sd);
39 if (!bus)
40 kfree(sd);
41
42#ifdef CONFIG_ACPI_NUMA
43 if (bus != NULL) {
44 if (pxm >= 0) {
45 printk("bus %d -> pxm %d -> node %d\n",
46 busnum, pxm, sd->node);
47 }
48 }
49#endif
50
51 return bus;
52}
53
54extern int pci_routeirq;
55static int __init pci_acpi_init(void)
56{
57 struct pci_dev *dev = NULL;
58
59 if (pcibios_scanned)
60 return 0;
61
62 if (acpi_noirq)
63 return 0;
64
65 printk(KERN_INFO "PCI: Using ACPI for IRQ routing\n");
66 acpi_irq_penalty_init();
67 pcibios_scanned++;
68 pcibios_enable_irq = acpi_pci_irq_enable;
69 pcibios_disable_irq = acpi_pci_irq_disable;
70
71 if (pci_routeirq) {
72 /*
73 * PCI IRQ routing is set up by pci_enable_device(), but we
74 * also do it here in case there are still broken drivers that
75 * don't use pci_enable_device().
76 */
77 printk(KERN_INFO "PCI: Routing PCI interrupts for all devices because \"pci=routeirq\" specified\n");
78 for_each_pci_dev(dev)
79 acpi_pci_irq_enable(dev);
80 } else
81 printk(KERN_INFO "PCI: If a device doesn't work, try \"pci=routeirq\". If it helps, post a report\n");
82
83#ifdef CONFIG_X86_IO_APIC
84 if (acpi_ioapic)
85 print_IO_APIC();
86#endif
87
88 return 0;
89}
90subsys_initcall(pci_acpi_init);
diff --git a/arch/i386/pci/common.c b/arch/i386/pci/common.c
deleted file mode 100644
index ebc6f3c66340..000000000000
--- a/arch/i386/pci/common.c
+++ /dev/null
@@ -1,480 +0,0 @@
1/*
2 * Low-Level PCI Support for PC
3 *
4 * (c) 1999--2000 Martin Mares <mj@ucw.cz>
5 */
6
7#include <linux/sched.h>
8#include <linux/pci.h>
9#include <linux/ioport.h>
10#include <linux/init.h>
11#include <linux/dmi.h>
12
13#include <asm/acpi.h>
14#include <asm/segment.h>
15#include <asm/io.h>
16#include <asm/smp.h>
17
18#include "pci.h"
19
20unsigned int pci_probe = PCI_PROBE_BIOS | PCI_PROBE_CONF1 | PCI_PROBE_CONF2 |
21 PCI_PROBE_MMCONF;
22
23static int pci_bf_sort;
24int pci_routeirq;
25int pcibios_last_bus = -1;
26unsigned long pirq_table_addr;
27struct pci_bus *pci_root_bus;
28struct pci_raw_ops *raw_pci_ops;
29
30static int pci_read(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 *value)
31{
32 return raw_pci_ops->read(0, bus->number, devfn, where, size, value);
33}
34
35static int pci_write(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 value)
36{
37 return raw_pci_ops->write(0, bus->number, devfn, where, size, value);
38}
39
40struct pci_ops pci_root_ops = {
41 .read = pci_read,
42 .write = pci_write,
43};
44
45/*
46 * legacy, numa, and acpi all want to call pcibios_scan_root
47 * from their initcalls. This flag prevents that.
48 */
49int pcibios_scanned;
50
51/*
52 * This interrupt-safe spinlock protects all accesses to PCI
53 * configuration space.
54 */
55DEFINE_SPINLOCK(pci_config_lock);
56
57/*
58 * Several buggy motherboards address only 16 devices and mirror
59 * them to next 16 IDs. We try to detect this `feature' on all
60 * primary buses (those containing host bridges as they are
61 * expected to be unique) and remove the ghost devices.
62 */
63
64static void __devinit pcibios_fixup_ghosts(struct pci_bus *b)
65{
66 struct list_head *ln, *mn;
67 struct pci_dev *d, *e;
68 int mirror = PCI_DEVFN(16,0);
69 int seen_host_bridge = 0;
70 int i;
71
72 DBG("PCI: Scanning for ghost devices on bus %d\n", b->number);
73 list_for_each(ln, &b->devices) {
74 d = pci_dev_b(ln);
75 if ((d->class >> 8) == PCI_CLASS_BRIDGE_HOST)
76 seen_host_bridge++;
77 for (mn=ln->next; mn != &b->devices; mn=mn->next) {
78 e = pci_dev_b(mn);
79 if (e->devfn != d->devfn + mirror ||
80 e->vendor != d->vendor ||
81 e->device != d->device ||
82 e->class != d->class)
83 continue;
84 for(i=0; i<PCI_NUM_RESOURCES; i++)
85 if (e->resource[i].start != d->resource[i].start ||
86 e->resource[i].end != d->resource[i].end ||
87 e->resource[i].flags != d->resource[i].flags)
88 continue;
89 break;
90 }
91 if (mn == &b->devices)
92 return;
93 }
94 if (!seen_host_bridge)
95 return;
96 printk(KERN_WARNING "PCI: Ignoring ghost devices on bus %02x\n", b->number);
97
98 ln = &b->devices;
99 while (ln->next != &b->devices) {
100 d = pci_dev_b(ln->next);
101 if (d->devfn >= mirror) {
102 list_del(&d->global_list);
103 list_del(&d->bus_list);
104 kfree(d);
105 } else
106 ln = ln->next;
107 }
108}
109
110/*
111 * Called after each bus is probed, but before its children
112 * are examined.
113 */
114
115void __devinit pcibios_fixup_bus(struct pci_bus *b)
116{
117 pcibios_fixup_ghosts(b);
118 pci_read_bridge_bases(b);
119}
120
121/*
122 * Only use DMI information to set this if nothing was passed
123 * on the kernel command line (which was parsed earlier).
124 */
125
126static int __devinit set_bf_sort(struct dmi_system_id *d)
127{
128 if (pci_bf_sort == pci_bf_sort_default) {
129 pci_bf_sort = pci_dmi_bf;
130 printk(KERN_INFO "PCI: %s detected, enabling pci=bfsort.\n", d->ident);
131 }
132 return 0;
133}
134
135/*
136 * Enable renumbering of PCI bus# ranges to reach all PCI busses (Cardbus)
137 */
138#ifdef __i386__
139static int __devinit assign_all_busses(struct dmi_system_id *d)
140{
141 pci_probe |= PCI_ASSIGN_ALL_BUSSES;
142 printk(KERN_INFO "%s detected: enabling PCI bus# renumbering"
143 " (pci=assign-busses)\n", d->ident);
144 return 0;
145}
146#endif
147
148static struct dmi_system_id __devinitdata pciprobe_dmi_table[] = {
149#ifdef __i386__
150/*
151 * Laptops which need pci=assign-busses to see Cardbus cards
152 */
153 {
154 .callback = assign_all_busses,
155 .ident = "Samsung X20 Laptop",
156 .matches = {
157 DMI_MATCH(DMI_SYS_VENDOR, "Samsung Electronics"),
158 DMI_MATCH(DMI_PRODUCT_NAME, "SX20S"),
159 },
160 },
161#endif /* __i386__ */
162 {
163 .callback = set_bf_sort,
164 .ident = "Dell PowerEdge 1950",
165 .matches = {
166 DMI_MATCH(DMI_SYS_VENDOR, "Dell"),
167 DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 1950"),
168 },
169 },
170 {
171 .callback = set_bf_sort,
172 .ident = "Dell PowerEdge 1955",
173 .matches = {
174 DMI_MATCH(DMI_SYS_VENDOR, "Dell"),
175 DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 1955"),
176 },
177 },
178 {
179 .callback = set_bf_sort,
180 .ident = "Dell PowerEdge 2900",
181 .matches = {
182 DMI_MATCH(DMI_SYS_VENDOR, "Dell"),
183 DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 2900"),
184 },
185 },
186 {
187 .callback = set_bf_sort,
188 .ident = "Dell PowerEdge 2950",
189 .matches = {
190 DMI_MATCH(DMI_SYS_VENDOR, "Dell"),
191 DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 2950"),
192 },
193 },
194 {
195 .callback = set_bf_sort,
196 .ident = "Dell PowerEdge R900",
197 .matches = {
198 DMI_MATCH(DMI_SYS_VENDOR, "Dell"),
199 DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge R900"),
200 },
201 },
202 {
203 .callback = set_bf_sort,
204 .ident = "HP ProLiant BL20p G3",
205 .matches = {
206 DMI_MATCH(DMI_SYS_VENDOR, "HP"),
207 DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL20p G3"),
208 },
209 },
210 {
211 .callback = set_bf_sort,
212 .ident = "HP ProLiant BL20p G4",
213 .matches = {
214 DMI_MATCH(DMI_SYS_VENDOR, "HP"),
215 DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL20p G4"),
216 },
217 },
218 {
219 .callback = set_bf_sort,
220 .ident = "HP ProLiant BL30p G1",
221 .matches = {
222 DMI_MATCH(DMI_SYS_VENDOR, "HP"),
223 DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL30p G1"),
224 },
225 },
226 {
227 .callback = set_bf_sort,
228 .ident = "HP ProLiant BL25p G1",
229 .matches = {
230 DMI_MATCH(DMI_SYS_VENDOR, "HP"),
231 DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL25p G1"),
232 },
233 },
234 {
235 .callback = set_bf_sort,
236 .ident = "HP ProLiant BL35p G1",
237 .matches = {
238 DMI_MATCH(DMI_SYS_VENDOR, "HP"),
239 DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL35p G1"),
240 },
241 },
242 {
243 .callback = set_bf_sort,
244 .ident = "HP ProLiant BL45p G1",
245 .matches = {
246 DMI_MATCH(DMI_SYS_VENDOR, "HP"),
247 DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL45p G1"),
248 },
249 },
250 {
251 .callback = set_bf_sort,
252 .ident = "HP ProLiant BL45p G2",
253 .matches = {
254 DMI_MATCH(DMI_SYS_VENDOR, "HP"),
255 DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL45p G2"),
256 },
257 },
258 {
259 .callback = set_bf_sort,
260 .ident = "HP ProLiant BL460c G1",
261 .matches = {
262 DMI_MATCH(DMI_SYS_VENDOR, "HP"),
263 DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL460c G1"),
264 },
265 },
266 {
267 .callback = set_bf_sort,
268 .ident = "HP ProLiant BL465c G1",
269 .matches = {
270 DMI_MATCH(DMI_SYS_VENDOR, "HP"),
271 DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL465c G1"),
272 },
273 },
274 {
275 .callback = set_bf_sort,
276 .ident = "HP ProLiant BL480c G1",
277 .matches = {
278 DMI_MATCH(DMI_SYS_VENDOR, "HP"),
279 DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL480c G1"),
280 },
281 },
282 {
283 .callback = set_bf_sort,
284 .ident = "HP ProLiant BL685c G1",
285 .matches = {
286 DMI_MATCH(DMI_SYS_VENDOR, "HP"),
287 DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL685c G1"),
288 },
289 },
290 {}
291};
292
293struct pci_bus * __devinit pcibios_scan_root(int busnum)
294{
295 struct pci_bus *bus = NULL;
296 struct pci_sysdata *sd;
297
298 dmi_check_system(pciprobe_dmi_table);
299
300 while ((bus = pci_find_next_bus(bus)) != NULL) {
301 if (bus->number == busnum) {
302 /* Already scanned */
303 return bus;
304 }
305 }
306
307 /* Allocate per-root-bus (not per bus) arch-specific data.
308 * TODO: leak; this memory is never freed.
309 * It's arguable whether it's worth the trouble to care.
310 */
311 sd = kzalloc(sizeof(*sd), GFP_KERNEL);
312 if (!sd) {
313 printk(KERN_ERR "PCI: OOM, not probing PCI bus %02x\n", busnum);
314 return NULL;
315 }
316
317 printk(KERN_DEBUG "PCI: Probing PCI hardware (bus %02x)\n", busnum);
318
319 return pci_scan_bus_parented(NULL, busnum, &pci_root_ops, sd);
320}
321
322extern u8 pci_cache_line_size;
323
324static int __init pcibios_init(void)
325{
326 struct cpuinfo_x86 *c = &boot_cpu_data;
327
328 if (!raw_pci_ops) {
329 printk(KERN_WARNING "PCI: System does not support PCI\n");
330 return 0;
331 }
332
333 /*
334 * Assume PCI cacheline size of 32 bytes for all x86s except K7/K8
335 * and P4. It's also good for 386/486s (which actually have 16)
336 * as quite a few PCI devices do not support smaller values.
337 */
338 pci_cache_line_size = 32 >> 2;
339 if (c->x86 >= 6 && c->x86_vendor == X86_VENDOR_AMD)
340 pci_cache_line_size = 64 >> 2; /* K7 & K8 */
341 else if (c->x86 > 6 && c->x86_vendor == X86_VENDOR_INTEL)
342 pci_cache_line_size = 128 >> 2; /* P4 */
343
344 pcibios_resource_survey();
345
346 if (pci_bf_sort >= pci_force_bf)
347 pci_sort_breadthfirst();
348#ifdef CONFIG_PCI_BIOS
349 if ((pci_probe & PCI_BIOS_SORT) && !(pci_probe & PCI_NO_SORT))
350 pcibios_sort();
351#endif
352 return 0;
353}
354
355subsys_initcall(pcibios_init);
356
357char * __devinit pcibios_setup(char *str)
358{
359 if (!strcmp(str, "off")) {
360 pci_probe = 0;
361 return NULL;
362 } else if (!strcmp(str, "bfsort")) {
363 pci_bf_sort = pci_force_bf;
364 return NULL;
365 } else if (!strcmp(str, "nobfsort")) {
366 pci_bf_sort = pci_force_nobf;
367 return NULL;
368 }
369#ifdef CONFIG_PCI_BIOS
370 else if (!strcmp(str, "bios")) {
371 pci_probe = PCI_PROBE_BIOS;
372 return NULL;
373 } else if (!strcmp(str, "nobios")) {
374 pci_probe &= ~PCI_PROBE_BIOS;
375 return NULL;
376 } else if (!strcmp(str, "nosort")) {
377 pci_probe |= PCI_NO_SORT;
378 return NULL;
379 } else if (!strcmp(str, "biosirq")) {
380 pci_probe |= PCI_BIOS_IRQ_SCAN;
381 return NULL;
382 } else if (!strncmp(str, "pirqaddr=", 9)) {
383 pirq_table_addr = simple_strtoul(str+9, NULL, 0);
384 return NULL;
385 }
386#endif
387#ifdef CONFIG_PCI_DIRECT
388 else if (!strcmp(str, "conf1")) {
389 pci_probe = PCI_PROBE_CONF1 | PCI_NO_CHECKS;
390 return NULL;
391 }
392 else if (!strcmp(str, "conf2")) {
393 pci_probe = PCI_PROBE_CONF2 | PCI_NO_CHECKS;
394 return NULL;
395 }
396#endif
397#ifdef CONFIG_PCI_MMCONFIG
398 else if (!strcmp(str, "nommconf")) {
399 pci_probe &= ~PCI_PROBE_MMCONF;
400 return NULL;
401 }
402#endif
403 else if (!strcmp(str, "noacpi")) {
404 acpi_noirq_set();
405 return NULL;
406 }
407 else if (!strcmp(str, "noearly")) {
408 pci_probe |= PCI_PROBE_NOEARLY;
409 return NULL;
410 }
411#ifndef CONFIG_X86_VISWS
412 else if (!strcmp(str, "usepirqmask")) {
413 pci_probe |= PCI_USE_PIRQ_MASK;
414 return NULL;
415 } else if (!strncmp(str, "irqmask=", 8)) {
416 pcibios_irq_mask = simple_strtol(str+8, NULL, 0);
417 return NULL;
418 } else if (!strncmp(str, "lastbus=", 8)) {
419 pcibios_last_bus = simple_strtol(str+8, NULL, 0);
420 return NULL;
421 }
422#endif
423 else if (!strcmp(str, "rom")) {
424 pci_probe |= PCI_ASSIGN_ROMS;
425 return NULL;
426 } else if (!strcmp(str, "assign-busses")) {
427 pci_probe |= PCI_ASSIGN_ALL_BUSSES;
428 return NULL;
429 } else if (!strcmp(str, "routeirq")) {
430 pci_routeirq = 1;
431 return NULL;
432 }
433 return str;
434}
435
436unsigned int pcibios_assign_all_busses(void)
437{
438 return (pci_probe & PCI_ASSIGN_ALL_BUSSES) ? 1 : 0;
439}
440
441int pcibios_enable_device(struct pci_dev *dev, int mask)
442{
443 int err;
444
445 if ((err = pcibios_enable_resources(dev, mask)) < 0)
446 return err;
447
448 if (!dev->msi_enabled)
449 return pcibios_enable_irq(dev);
450 return 0;
451}
452
453void pcibios_disable_device (struct pci_dev *dev)
454{
455 if (!dev->msi_enabled && pcibios_disable_irq)
456 pcibios_disable_irq(dev);
457}
458
459struct pci_bus *pci_scan_bus_with_sysdata(int busno)
460{
461 struct pci_bus *bus = NULL;
462 struct pci_sysdata *sd;
463
464 /*
465 * Allocate per-root-bus (not per bus) arch-specific data.
466 * TODO: leak; this memory is never freed.
467 * It's arguable whether it's worth the trouble to care.
468 */
469 sd = kzalloc(sizeof(*sd), GFP_KERNEL);
470 if (!sd) {
471 printk(KERN_ERR "PCI: OOM, skipping PCI bus %02x\n", busno);
472 return NULL;
473 }
474 sd->node = -1;
475 bus = pci_scan_bus(busno, &pci_root_ops, sd);
476 if (!bus)
477 kfree(sd);
478
479 return bus;
480}
diff --git a/arch/i386/pci/direct.c b/arch/i386/pci/direct.c
deleted file mode 100644
index 431c9a51b157..000000000000
--- a/arch/i386/pci/direct.c
+++ /dev/null
@@ -1,302 +0,0 @@
1/*
2 * direct.c - Low-level direct PCI config space access
3 */
4
5#include <linux/pci.h>
6#include <linux/init.h>
7#include <linux/dmi.h>
8#include "pci.h"
9
10/*
11 * Functions for accessing PCI configuration space with type 1 accesses
12 */
13
14#define PCI_CONF1_ADDRESS(bus, devfn, reg) \
15 (0x80000000 | (bus << 16) | (devfn << 8) | (reg & ~3))
16
17int pci_conf1_read(unsigned int seg, unsigned int bus,
18 unsigned int devfn, int reg, int len, u32 *value)
19{
20 unsigned long flags;
21
22 if ((bus > 255) || (devfn > 255) || (reg > 255)) {
23 *value = -1;
24 return -EINVAL;
25 }
26
27 spin_lock_irqsave(&pci_config_lock, flags);
28
29 outl(PCI_CONF1_ADDRESS(bus, devfn, reg), 0xCF8);
30
31 switch (len) {
32 case 1:
33 *value = inb(0xCFC + (reg & 3));
34 break;
35 case 2:
36 *value = inw(0xCFC + (reg & 2));
37 break;
38 case 4:
39 *value = inl(0xCFC);
40 break;
41 }
42
43 spin_unlock_irqrestore(&pci_config_lock, flags);
44
45 return 0;
46}
47
48int pci_conf1_write(unsigned int seg, unsigned int bus,
49 unsigned int devfn, int reg, int len, u32 value)
50{
51 unsigned long flags;
52
53 if ((bus > 255) || (devfn > 255) || (reg > 255))
54 return -EINVAL;
55
56 spin_lock_irqsave(&pci_config_lock, flags);
57
58 outl(PCI_CONF1_ADDRESS(bus, devfn, reg), 0xCF8);
59
60 switch (len) {
61 case 1:
62 outb((u8)value, 0xCFC + (reg & 3));
63 break;
64 case 2:
65 outw((u16)value, 0xCFC + (reg & 2));
66 break;
67 case 4:
68 outl((u32)value, 0xCFC);
69 break;
70 }
71
72 spin_unlock_irqrestore(&pci_config_lock, flags);
73
74 return 0;
75}
76
77#undef PCI_CONF1_ADDRESS
78
79struct pci_raw_ops pci_direct_conf1 = {
80 .read = pci_conf1_read,
81 .write = pci_conf1_write,
82};
83
84
85/*
86 * Functions for accessing PCI configuration space with type 2 accesses
87 */
88
89#define PCI_CONF2_ADDRESS(dev, reg) (u16)(0xC000 | (dev << 8) | reg)
90
91static int pci_conf2_read(unsigned int seg, unsigned int bus,
92 unsigned int devfn, int reg, int len, u32 *value)
93{
94 unsigned long flags;
95 int dev, fn;
96
97 if ((bus > 255) || (devfn > 255) || (reg > 255)) {
98 *value = -1;
99 return -EINVAL;
100 }
101
102 dev = PCI_SLOT(devfn);
103 fn = PCI_FUNC(devfn);
104
105 if (dev & 0x10)
106 return PCIBIOS_DEVICE_NOT_FOUND;
107
108 spin_lock_irqsave(&pci_config_lock, flags);
109
110 outb((u8)(0xF0 | (fn << 1)), 0xCF8);
111 outb((u8)bus, 0xCFA);
112
113 switch (len) {
114 case 1:
115 *value = inb(PCI_CONF2_ADDRESS(dev, reg));
116 break;
117 case 2:
118 *value = inw(PCI_CONF2_ADDRESS(dev, reg));
119 break;
120 case 4:
121 *value = inl(PCI_CONF2_ADDRESS(dev, reg));
122 break;
123 }
124
125 outb(0, 0xCF8);
126
127 spin_unlock_irqrestore(&pci_config_lock, flags);
128
129 return 0;
130}
131
132static int pci_conf2_write(unsigned int seg, unsigned int bus,
133 unsigned int devfn, int reg, int len, u32 value)
134{
135 unsigned long flags;
136 int dev, fn;
137
138 if ((bus > 255) || (devfn > 255) || (reg > 255))
139 return -EINVAL;
140
141 dev = PCI_SLOT(devfn);
142 fn = PCI_FUNC(devfn);
143
144 if (dev & 0x10)
145 return PCIBIOS_DEVICE_NOT_FOUND;
146
147 spin_lock_irqsave(&pci_config_lock, flags);
148
149 outb((u8)(0xF0 | (fn << 1)), 0xCF8);
150 outb((u8)bus, 0xCFA);
151
152 switch (len) {
153 case 1:
154 outb((u8)value, PCI_CONF2_ADDRESS(dev, reg));
155 break;
156 case 2:
157 outw((u16)value, PCI_CONF2_ADDRESS(dev, reg));
158 break;
159 case 4:
160 outl((u32)value, PCI_CONF2_ADDRESS(dev, reg));
161 break;
162 }
163
164 outb(0, 0xCF8);
165
166 spin_unlock_irqrestore(&pci_config_lock, flags);
167
168 return 0;
169}
170
171#undef PCI_CONF2_ADDRESS
172
173static struct pci_raw_ops pci_direct_conf2 = {
174 .read = pci_conf2_read,
175 .write = pci_conf2_write,
176};
177
178
179/*
180 * Before we decide to use direct hardware access mechanisms, we try to do some
181 * trivial checks to ensure it at least _seems_ to be working -- we just test
182 * whether bus 00 contains a host bridge (this is similar to checking
183 * techniques used in XFree86, but ours should be more reliable since we
184 * attempt to make use of direct access hints provided by the PCI BIOS).
185 *
186 * This should be close to trivial, but it isn't, because there are buggy
187 * chipsets (yes, you guessed it, by Intel and Compaq) that have no class ID.
188 */
189static int __init pci_sanity_check(struct pci_raw_ops *o)
190{
191 u32 x = 0;
192 int devfn;
193
194 if (pci_probe & PCI_NO_CHECKS)
195 return 1;
196 /* Assume Type 1 works for newer systems.
197 This handles machines that don't have anything on PCI Bus 0. */
198 if (dmi_get_year(DMI_BIOS_DATE) >= 2001)
199 return 1;
200
201 for (devfn = 0; devfn < 0x100; devfn++) {
202 if (o->read(0, 0, devfn, PCI_CLASS_DEVICE, 2, &x))
203 continue;
204 if (x == PCI_CLASS_BRIDGE_HOST || x == PCI_CLASS_DISPLAY_VGA)
205 return 1;
206
207 if (o->read(0, 0, devfn, PCI_VENDOR_ID, 2, &x))
208 continue;
209 if (x == PCI_VENDOR_ID_INTEL || x == PCI_VENDOR_ID_COMPAQ)
210 return 1;
211 }
212
213 DBG(KERN_WARNING "PCI: Sanity check failed\n");
214 return 0;
215}
216
217static int __init pci_check_type1(void)
218{
219 unsigned long flags;
220 unsigned int tmp;
221 int works = 0;
222
223 local_irq_save(flags);
224
225 outb(0x01, 0xCFB);
226 tmp = inl(0xCF8);
227 outl(0x80000000, 0xCF8);
228 if (inl(0xCF8) == 0x80000000 && pci_sanity_check(&pci_direct_conf1)) {
229 works = 1;
230 }
231 outl(tmp, 0xCF8);
232 local_irq_restore(flags);
233
234 return works;
235}
236
237static int __init pci_check_type2(void)
238{
239 unsigned long flags;
240 int works = 0;
241
242 local_irq_save(flags);
243
244 outb(0x00, 0xCFB);
245 outb(0x00, 0xCF8);
246 outb(0x00, 0xCFA);
247 if (inb(0xCF8) == 0x00 && inb(0xCFA) == 0x00 &&
248 pci_sanity_check(&pci_direct_conf2)) {
249 works = 1;
250 }
251
252 local_irq_restore(flags);
253
254 return works;
255}
256
257void __init pci_direct_init(int type)
258{
259 if (type == 0)
260 return;
261 printk(KERN_INFO "PCI: Using configuration type %d\n", type);
262 if (type == 1)
263 raw_pci_ops = &pci_direct_conf1;
264 else
265 raw_pci_ops = &pci_direct_conf2;
266}
267
268int __init pci_direct_probe(void)
269{
270 struct resource *region, *region2;
271
272 if ((pci_probe & PCI_PROBE_CONF1) == 0)
273 goto type2;
274 region = request_region(0xCF8, 8, "PCI conf1");
275 if (!region)
276 goto type2;
277
278 if (pci_check_type1())
279 return 1;
280 release_resource(region);
281
282 type2:
283 if ((pci_probe & PCI_PROBE_CONF2) == 0)
284 return 0;
285 region = request_region(0xCF8, 4, "PCI conf2");
286 if (!region)
287 return 0;
288 region2 = request_region(0xC000, 0x1000, "PCI conf2");
289 if (!region2)
290 goto fail2;
291
292 if (pci_check_type2()) {
293 printk(KERN_INFO "PCI: Using configuration type 2\n");
294 raw_pci_ops = &pci_direct_conf2;
295 return 2;
296 }
297
298 release_resource(region2);
299 fail2:
300 release_resource(region);
301 return 0;
302}
diff --git a/arch/i386/pci/early.c b/arch/i386/pci/early.c
deleted file mode 100644
index 42df4b6606df..000000000000
--- a/arch/i386/pci/early.c
+++ /dev/null
@@ -1,59 +0,0 @@
1#include <linux/kernel.h>
2#include <linux/pci.h>
3#include <asm/pci-direct.h>
4#include <asm/io.h>
5#include "pci.h"
6
7/* Direct PCI access. This is used for PCI accesses in early boot before
8 the PCI subsystem works. */
9
10#define PDprintk(x...)
11
12u32 read_pci_config(u8 bus, u8 slot, u8 func, u8 offset)
13{
14 u32 v;
15 outl(0x80000000 | (bus<<16) | (slot<<11) | (func<<8) | offset, 0xcf8);
16 v = inl(0xcfc);
17 if (v != 0xffffffff)
18 PDprintk("%x reading 4 from %x: %x\n", slot, offset, v);
19 return v;
20}
21
22u8 read_pci_config_byte(u8 bus, u8 slot, u8 func, u8 offset)
23{
24 u8 v;
25 outl(0x80000000 | (bus<<16) | (slot<<11) | (func<<8) | offset, 0xcf8);
26 v = inb(0xcfc + (offset&3));
27 PDprintk("%x reading 1 from %x: %x\n", slot, offset, v);
28 return v;
29}
30
31u16 read_pci_config_16(u8 bus, u8 slot, u8 func, u8 offset)
32{
33 u16 v;
34 outl(0x80000000 | (bus<<16) | (slot<<11) | (func<<8) | offset, 0xcf8);
35 v = inw(0xcfc + (offset&2));
36 PDprintk("%x reading 2 from %x: %x\n", slot, offset, v);
37 return v;
38}
39
40void write_pci_config(u8 bus, u8 slot, u8 func, u8 offset,
41 u32 val)
42{
43 PDprintk("%x writing to %x: %x\n", slot, offset, val);
44 outl(0x80000000 | (bus<<16) | (slot<<11) | (func<<8) | offset, 0xcf8);
45 outl(val, 0xcfc);
46}
47
48void write_pci_config_byte(u8 bus, u8 slot, u8 func, u8 offset, u8 val)
49{
50 PDprintk("%x writing to %x: %x\n", slot, offset, val);
51 outl(0x80000000 | (bus<<16) | (slot<<11) | (func<<8) | offset, 0xcf8);
52 outb(val, 0xcfc);
53}
54
55int early_pci_allowed(void)
56{
57 return (pci_probe & (PCI_PROBE_CONF1|PCI_PROBE_NOEARLY)) ==
58 PCI_PROBE_CONF1;
59}
diff --git a/arch/i386/pci/fixup.c b/arch/i386/pci/fixup.c
deleted file mode 100644
index c82cbf4c7226..000000000000
--- a/arch/i386/pci/fixup.c
+++ /dev/null
@@ -1,446 +0,0 @@
1/*
2 * Exceptions for specific devices. Usually work-arounds for fatal design flaws.
3 */
4
5#include <linux/delay.h>
6#include <linux/dmi.h>
7#include <linux/pci.h>
8#include <linux/init.h>
9#include "pci.h"
10
11
12static void __devinit pci_fixup_i450nx(struct pci_dev *d)
13{
14 /*
15 * i450NX -- Find and scan all secondary buses on all PXB's.
16 */
17 int pxb, reg;
18 u8 busno, suba, subb;
19
20 printk(KERN_WARNING "PCI: Searching for i450NX host bridges on %s\n", pci_name(d));
21 reg = 0xd0;
22 for(pxb=0; pxb<2; pxb++) {
23 pci_read_config_byte(d, reg++, &busno);
24 pci_read_config_byte(d, reg++, &suba);
25 pci_read_config_byte(d, reg++, &subb);
26 DBG("i450NX PXB %d: %02x/%02x/%02x\n", pxb, busno, suba, subb);
27 if (busno)
28 pci_scan_bus_with_sysdata(busno); /* Bus A */
29 if (suba < subb)
30 pci_scan_bus_with_sysdata(suba+1); /* Bus B */
31 }
32 pcibios_last_bus = -1;
33}
34DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82451NX, pci_fixup_i450nx);
35
36static void __devinit pci_fixup_i450gx(struct pci_dev *d)
37{
38 /*
39 * i450GX and i450KX -- Find and scan all secondary buses.
40 * (called separately for each PCI bridge found)
41 */
42 u8 busno;
43 pci_read_config_byte(d, 0x4a, &busno);
44 printk(KERN_INFO "PCI: i440KX/GX host bridge %s: secondary bus %02x\n", pci_name(d), busno);
45 pci_scan_bus_with_sysdata(busno);
46 pcibios_last_bus = -1;
47}
48DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82454GX, pci_fixup_i450gx);
49
50static void __devinit pci_fixup_umc_ide(struct pci_dev *d)
51{
52 /*
53 * UM8886BF IDE controller sets region type bits incorrectly,
54 * therefore they look like memory despite of them being I/O.
55 */
56 int i;
57
58 printk(KERN_WARNING "PCI: Fixing base address flags for device %s\n", pci_name(d));
59 for(i=0; i<4; i++)
60 d->resource[i].flags |= PCI_BASE_ADDRESS_SPACE_IO;
61}
62DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_UMC, PCI_DEVICE_ID_UMC_UM8886BF, pci_fixup_umc_ide);
63
64static void __devinit pci_fixup_ncr53c810(struct pci_dev *d)
65{
66 /*
67 * NCR 53C810 returns class code 0 (at least on some systems).
68 * Fix class to be PCI_CLASS_STORAGE_SCSI
69 */
70 if (!d->class) {
71 printk(KERN_WARNING "PCI: fixing NCR 53C810 class code for %s\n", pci_name(d));
72 d->class = PCI_CLASS_STORAGE_SCSI << 8;
73 }
74}
75DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NCR, PCI_DEVICE_ID_NCR_53C810, pci_fixup_ncr53c810);
76
77static void __devinit pci_fixup_latency(struct pci_dev *d)
78{
79 /*
80 * SiS 5597 and 5598 chipsets require latency timer set to
81 * at most 32 to avoid lockups.
82 */
83 DBG("PCI: Setting max latency to 32\n");
84 pcibios_max_latency = 32;
85}
86DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_5597, pci_fixup_latency);
87DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_5598, pci_fixup_latency);
88
89static void __devinit pci_fixup_piix4_acpi(struct pci_dev *d)
90{
91 /*
92 * PIIX4 ACPI device: hardwired IRQ9
93 */
94 d->irq = 9;
95}
96DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_3, pci_fixup_piix4_acpi);
97
98/*
99 * Addresses issues with problems in the memory write queue timer in
100 * certain VIA Northbridges. This bugfix is per VIA's specifications,
101 * except for the KL133/KM133: clearing bit 5 on those Northbridges seems
102 * to trigger a bug in its integrated ProSavage video card, which
103 * causes screen corruption. We only clear bits 6 and 7 for that chipset,
104 * until VIA can provide us with definitive information on why screen
105 * corruption occurs, and what exactly those bits do.
106 *
107 * VIA 8363,8622,8361 Northbridges:
108 * - bits 5, 6, 7 at offset 0x55 need to be turned off
109 * VIA 8367 (KT266x) Northbridges:
110 * - bits 5, 6, 7 at offset 0x95 need to be turned off
111 * VIA 8363 rev 0x81/0x84 (KL133/KM133) Northbridges:
112 * - bits 6, 7 at offset 0x55 need to be turned off
113 */
114
115#define VIA_8363_KL133_REVISION_ID 0x81
116#define VIA_8363_KM133_REVISION_ID 0x84
117
118static void pci_fixup_via_northbridge_bug(struct pci_dev *d)
119{
120 u8 v;
121 int where = 0x55;
122 int mask = 0x1f; /* clear bits 5, 6, 7 by default */
123
124 if (d->device == PCI_DEVICE_ID_VIA_8367_0) {
125 /* fix pci bus latency issues resulted by NB bios error
126 it appears on bug free^Wreduced kt266x's bios forces
127 NB latency to zero */
128 pci_write_config_byte(d, PCI_LATENCY_TIMER, 0);
129
130 where = 0x95; /* the memory write queue timer register is
131 different for the KT266x's: 0x95 not 0x55 */
132 } else if (d->device == PCI_DEVICE_ID_VIA_8363_0 &&
133 (d->revision == VIA_8363_KL133_REVISION_ID ||
134 d->revision == VIA_8363_KM133_REVISION_ID)) {
135 mask = 0x3f; /* clear only bits 6 and 7; clearing bit 5
136 causes screen corruption on the KL133/KM133 */
137 }
138
139 pci_read_config_byte(d, where, &v);
140 if (v & ~mask) {
141 printk(KERN_WARNING "Disabling VIA memory write queue (PCI ID %04x, rev %02x): [%02x] %02x & %02x -> %02x\n", \
142 d->device, d->revision, where, v, mask, v & mask);
143 v &= mask;
144 pci_write_config_byte(d, where, v);
145 }
146}
147DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8363_0, pci_fixup_via_northbridge_bug);
148DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8622, pci_fixup_via_northbridge_bug);
149DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8361, pci_fixup_via_northbridge_bug);
150DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8367_0, pci_fixup_via_northbridge_bug);
151DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8363_0, pci_fixup_via_northbridge_bug);
152DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8622, pci_fixup_via_northbridge_bug);
153DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8361, pci_fixup_via_northbridge_bug);
154DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8367_0, pci_fixup_via_northbridge_bug);
155
156/*
157 * For some reasons Intel decided that certain parts of their
158 * 815, 845 and some other chipsets must look like PCI-to-PCI bridges
159 * while they are obviously not. The 82801 family (AA, AB, BAM/CAM,
160 * BA/CA/DB and E) PCI bridges are actually HUB-to-PCI ones, according
161 * to Intel terminology. These devices do forward all addresses from
162 * system to PCI bus no matter what are their window settings, so they are
163 * "transparent" (or subtractive decoding) from programmers point of view.
164 */
165static void __devinit pci_fixup_transparent_bridge(struct pci_dev *dev)
166{
167 if ((dev->class >> 8) == PCI_CLASS_BRIDGE_PCI &&
168 (dev->device & 0xff00) == 0x2400)
169 dev->transparent = 1;
170}
171DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_ANY_ID, pci_fixup_transparent_bridge);
172
173/*
174 * Fixup for C1 Halt Disconnect problem on nForce2 systems.
175 *
176 * From information provided by "Allen Martin" <AMartin@nvidia.com>:
177 *
178 * A hang is caused when the CPU generates a very fast CONNECT/HALT cycle
179 * sequence. Workaround is to set the SYSTEM_IDLE_TIMEOUT to 80 ns.
180 * This allows the state-machine and timer to return to a proper state within
181 * 80 ns of the CONNECT and probe appearing together. Since the CPU will not
182 * issue another HALT within 80 ns of the initial HALT, the failure condition
183 * is avoided.
184 */
185static void pci_fixup_nforce2(struct pci_dev *dev)
186{
187 u32 val;
188
189 /*
190 * Chip Old value New value
191 * C17 0x1F0FFF01 0x1F01FF01
192 * C18D 0x9F0FFF01 0x9F01FF01
193 *
194 * Northbridge chip version may be determined by
195 * reading the PCI revision ID (0xC1 or greater is C18D).
196 */
197 pci_read_config_dword(dev, 0x6c, &val);
198
199 /*
200 * Apply fixup if needed, but don't touch disconnect state
201 */
202 if ((val & 0x00FF0000) != 0x00010000) {
203 printk(KERN_WARNING "PCI: nForce2 C1 Halt Disconnect fixup\n");
204 pci_write_config_dword(dev, 0x6c, (val & 0xFF00FFFF) | 0x00010000);
205 }
206}
207DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE2, pci_fixup_nforce2);
208DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE2, pci_fixup_nforce2);
209
210/* Max PCI Express root ports */
211#define MAX_PCIEROOT 6
212static int quirk_aspm_offset[MAX_PCIEROOT << 3];
213
214#define GET_INDEX(a, b) ((((a) - PCI_DEVICE_ID_INTEL_MCH_PA) << 3) + ((b) & 7))
215
216static int quirk_pcie_aspm_read(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 *value)
217{
218 return raw_pci_ops->read(0, bus->number, devfn, where, size, value);
219}
220
221/*
222 * Replace the original pci bus ops for write with a new one that will filter
223 * the request to insure ASPM cannot be enabled.
224 */
225static int quirk_pcie_aspm_write(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 value)
226{
227 u8 offset;
228
229 offset = quirk_aspm_offset[GET_INDEX(bus->self->device, devfn)];
230
231 if ((offset) && (where == offset))
232 value = value & 0xfffffffc;
233
234 return raw_pci_ops->write(0, bus->number, devfn, where, size, value);
235}
236
237static struct pci_ops quirk_pcie_aspm_ops = {
238 .read = quirk_pcie_aspm_read,
239 .write = quirk_pcie_aspm_write,
240};
241
242/*
243 * Prevents PCI Express ASPM (Active State Power Management) being enabled.
244 *
245 * Save the register offset, where the ASPM control bits are located,
246 * for each PCI Express device that is in the device list of
247 * the root port in an array for fast indexing. Replace the bus ops
248 * with the modified one.
249 */
250static void pcie_rootport_aspm_quirk(struct pci_dev *pdev)
251{
252 int cap_base, i;
253 struct pci_bus *pbus;
254 struct pci_dev *dev;
255
256 if ((pbus = pdev->subordinate) == NULL)
257 return;
258
259 /*
260 * Check if the DID of pdev matches one of the six root ports. This
261 * check is needed in the case this function is called directly by the
262 * hot-plug driver.
263 */
264 if ((pdev->device < PCI_DEVICE_ID_INTEL_MCH_PA) ||
265 (pdev->device > PCI_DEVICE_ID_INTEL_MCH_PC1))
266 return;
267
268 if (list_empty(&pbus->devices)) {
269 /*
270 * If no device is attached to the root port at power-up or
271 * after hot-remove, the pbus->devices is empty and this code
272 * will set the offsets to zero and the bus ops to parent's bus
273 * ops, which is unmodified.
274 */
275 for (i= GET_INDEX(pdev->device, 0); i <= GET_INDEX(pdev->device, 7); ++i)
276 quirk_aspm_offset[i] = 0;
277
278 pbus->ops = pbus->parent->ops;
279 } else {
280 /*
281 * If devices are attached to the root port at power-up or
282 * after hot-add, the code loops through the device list of
283 * each root port to save the register offsets and replace the
284 * bus ops.
285 */
286 list_for_each_entry(dev, &pbus->devices, bus_list) {
287 /* There are 0 to 8 devices attached to this bus */
288 cap_base = pci_find_capability(dev, PCI_CAP_ID_EXP);
289 quirk_aspm_offset[GET_INDEX(pdev->device, dev->devfn)]= cap_base + 0x10;
290 }
291 pbus->ops = &quirk_pcie_aspm_ops;
292 }
293}
294DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_MCH_PA, pcie_rootport_aspm_quirk );
295DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_MCH_PA1, pcie_rootport_aspm_quirk );
296DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_MCH_PB, pcie_rootport_aspm_quirk );
297DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_MCH_PB1, pcie_rootport_aspm_quirk );
298DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_MCH_PC, pcie_rootport_aspm_quirk );
299DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_MCH_PC1, pcie_rootport_aspm_quirk );
300
301/*
302 * Fixup to mark boot BIOS video selected by BIOS before it changes
303 *
304 * From information provided by "Jon Smirl" <jonsmirl@gmail.com>
305 *
306 * The standard boot ROM sequence for an x86 machine uses the BIOS
307 * to select an initial video card for boot display. This boot video
308 * card will have it's BIOS copied to C0000 in system RAM.
309 * IORESOURCE_ROM_SHADOW is used to associate the boot video
310 * card with this copy. On laptops this copy has to be used since
311 * the main ROM may be compressed or combined with another image.
312 * See pci_map_rom() for use of this flag. IORESOURCE_ROM_SHADOW
313 * is marked here since the boot video device will be the only enabled
314 * video device at this point.
315 */
316
317static void __devinit pci_fixup_video(struct pci_dev *pdev)
318{
319 struct pci_dev *bridge;
320 struct pci_bus *bus;
321 u16 config;
322
323 if ((pdev->class >> 8) != PCI_CLASS_DISPLAY_VGA)
324 return;
325
326 /* Is VGA routed to us? */
327 bus = pdev->bus;
328 while (bus) {
329 bridge = bus->self;
330
331 /*
332 * From information provided by
333 * "David Miller" <davem@davemloft.net>
334 * The bridge control register is valid for PCI header
335 * type BRIDGE, or CARDBUS. Host to PCI controllers use
336 * PCI header type NORMAL.
337 */
338 if (bridge
339 &&((bridge->hdr_type == PCI_HEADER_TYPE_BRIDGE)
340 ||(bridge->hdr_type == PCI_HEADER_TYPE_CARDBUS))) {
341 pci_read_config_word(bridge, PCI_BRIDGE_CONTROL,
342 &config);
343 if (!(config & PCI_BRIDGE_CTL_VGA))
344 return;
345 }
346 bus = bus->parent;
347 }
348 pci_read_config_word(pdev, PCI_COMMAND, &config);
349 if (config & (PCI_COMMAND_IO | PCI_COMMAND_MEMORY)) {
350 pdev->resource[PCI_ROM_RESOURCE].flags |= IORESOURCE_ROM_SHADOW;
351 printk(KERN_DEBUG "Boot video device is %s\n", pci_name(pdev));
352 }
353}
354DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, pci_fixup_video);
355
356/*
357 * Some Toshiba laptops need extra code to enable their TI TSB43AB22/A.
358 *
359 * We pretend to bring them out of full D3 state, and restore the proper
360 * IRQ, PCI cache line size, and BARs, otherwise the device won't function
361 * properly. In some cases, the device will generate an interrupt on
362 * the wrong IRQ line, causing any devices sharing the line it's
363 * *supposed* to use to be disabled by the kernel's IRQ debug code.
364 */
365static u16 toshiba_line_size;
366
367static struct dmi_system_id __devinitdata toshiba_ohci1394_dmi_table[] = {
368 {
369 .ident = "Toshiba PS5 based laptop",
370 .matches = {
371 DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
372 DMI_MATCH(DMI_PRODUCT_VERSION, "PS5"),
373 },
374 },
375 {
376 .ident = "Toshiba PSM4 based laptop",
377 .matches = {
378 DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
379 DMI_MATCH(DMI_PRODUCT_VERSION, "PSM4"),
380 },
381 },
382 {
383 .ident = "Toshiba A40 based laptop",
384 .matches = {
385 DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
386 DMI_MATCH(DMI_PRODUCT_VERSION, "PSA40U"),
387 },
388 },
389 { }
390};
391
392static void __devinit pci_pre_fixup_toshiba_ohci1394(struct pci_dev *dev)
393{
394 if (!dmi_check_system(toshiba_ohci1394_dmi_table))
395 return; /* only applies to certain Toshibas (so far) */
396
397 dev->current_state = PCI_D3cold;
398 pci_read_config_word(dev, PCI_CACHE_LINE_SIZE, &toshiba_line_size);
399}
400DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TI, 0x8032,
401 pci_pre_fixup_toshiba_ohci1394);
402
403static void __devinit pci_post_fixup_toshiba_ohci1394(struct pci_dev *dev)
404{
405 if (!dmi_check_system(toshiba_ohci1394_dmi_table))
406 return; /* only applies to certain Toshibas (so far) */
407
408 /* Restore config space on Toshiba laptops */
409 pci_write_config_word(dev, PCI_CACHE_LINE_SIZE, toshiba_line_size);
410 pci_read_config_byte(dev, PCI_INTERRUPT_LINE, (u8 *)&dev->irq);
411 pci_write_config_dword(dev, PCI_BASE_ADDRESS_0,
412 pci_resource_start(dev, 0));
413 pci_write_config_dword(dev, PCI_BASE_ADDRESS_1,
414 pci_resource_start(dev, 1));
415}
416DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_TI, 0x8032,
417 pci_post_fixup_toshiba_ohci1394);
418
419
420/*
421 * Prevent the BIOS trapping accesses to the Cyrix CS5530A video device
422 * configuration space.
423 */
424static void pci_early_fixup_cyrix_5530(struct pci_dev *dev)
425{
426 u8 r;
427 /* clear 'F4 Video Configuration Trap' bit */
428 pci_read_config_byte(dev, 0x42, &r);
429 r &= 0xfd;
430 pci_write_config_byte(dev, 0x42, r);
431}
432DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5530_LEGACY,
433 pci_early_fixup_cyrix_5530);
434DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5530_LEGACY,
435 pci_early_fixup_cyrix_5530);
436
437/*
438 * Siemens Nixdorf AG FSC Multiprocessor Interrupt Controller:
439 * prevent update of the BAR0, which doesn't look like a normal BAR.
440 */
441static void __devinit pci_siemens_interrupt_controller(struct pci_dev *dev)
442{
443 dev->resource[0].flags |= IORESOURCE_PCI_FIXED;
444}
445DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SIEMENS, 0x0015,
446 pci_siemens_interrupt_controller);
diff --git a/arch/i386/pci/i386.c b/arch/i386/pci/i386.c
deleted file mode 100644
index bcd2f94b732c..000000000000
--- a/arch/i386/pci/i386.c
+++ /dev/null
@@ -1,315 +0,0 @@
1/*
2 * Low-Level PCI Access for i386 machines
3 *
4 * Copyright 1993, 1994 Drew Eckhardt
5 * Visionary Computing
6 * (Unix and Linux consulting and custom programming)
7 * Drew@Colorado.EDU
8 * +1 (303) 786-7975
9 *
10 * Drew's work was sponsored by:
11 * iX Multiuser Multitasking Magazine
12 * Hannover, Germany
13 * hm@ix.de
14 *
15 * Copyright 1997--2000 Martin Mares <mj@ucw.cz>
16 *
17 * For more information, please consult the following manuals (look at
18 * http://www.pcisig.com/ for how to get them):
19 *
20 * PCI BIOS Specification
21 * PCI Local Bus Specification
22 * PCI to PCI Bridge Specification
23 * PCI System Design Guide
24 *
25 */
26
27#include <linux/types.h>
28#include <linux/kernel.h>
29#include <linux/pci.h>
30#include <linux/init.h>
31#include <linux/ioport.h>
32#include <linux/errno.h>
33
34#include "pci.h"
35
36/*
37 * We need to avoid collisions with `mirrored' VGA ports
38 * and other strange ISA hardware, so we always want the
39 * addresses to be allocated in the 0x000-0x0ff region
40 * modulo 0x400.
41 *
42 * Why? Because some silly external IO cards only decode
43 * the low 10 bits of the IO address. The 0x00-0xff region
44 * is reserved for motherboard devices that decode all 16
45 * bits, so it's ok to allocate at, say, 0x2800-0x28ff,
46 * but we want to try to avoid allocating at 0x2900-0x2bff
47 * which might have be mirrored at 0x0100-0x03ff..
48 */
49void
50pcibios_align_resource(void *data, struct resource *res,
51 resource_size_t size, resource_size_t align)
52{
53 if (res->flags & IORESOURCE_IO) {
54 resource_size_t start = res->start;
55
56 if (start & 0x300) {
57 start = (start + 0x3ff) & ~0x3ff;
58 res->start = start;
59 }
60 }
61}
62
63
64/*
65 * Handle resources of PCI devices. If the world were perfect, we could
66 * just allocate all the resource regions and do nothing more. It isn't.
67 * On the other hand, we cannot just re-allocate all devices, as it would
68 * require us to know lots of host bridge internals. So we attempt to
69 * keep as much of the original configuration as possible, but tweak it
70 * when it's found to be wrong.
71 *
72 * Known BIOS problems we have to work around:
73 * - I/O or memory regions not configured
74 * - regions configured, but not enabled in the command register
75 * - bogus I/O addresses above 64K used
76 * - expansion ROMs left enabled (this may sound harmless, but given
77 * the fact the PCI specs explicitly allow address decoders to be
78 * shared between expansion ROMs and other resource regions, it's
79 * at least dangerous)
80 *
81 * Our solution:
82 * (1) Allocate resources for all buses behind PCI-to-PCI bridges.
83 * This gives us fixed barriers on where we can allocate.
84 * (2) Allocate resources for all enabled devices. If there is
85 * a collision, just mark the resource as unallocated. Also
86 * disable expansion ROMs during this step.
87 * (3) Try to allocate resources for disabled devices. If the
88 * resources were assigned correctly, everything goes well,
89 * if they weren't, they won't disturb allocation of other
90 * resources.
91 * (4) Assign new addresses to resources which were either
92 * not configured at all or misconfigured. If explicitly
93 * requested by the user, configure expansion ROM address
94 * as well.
95 */
96
97static void __init pcibios_allocate_bus_resources(struct list_head *bus_list)
98{
99 struct pci_bus *bus;
100 struct pci_dev *dev;
101 int idx;
102 struct resource *r, *pr;
103
104 /* Depth-First Search on bus tree */
105 list_for_each_entry(bus, bus_list, node) {
106 if ((dev = bus->self)) {
107 for (idx = PCI_BRIDGE_RESOURCES;
108 idx < PCI_NUM_RESOURCES; idx++) {
109 r = &dev->resource[idx];
110 if (!r->flags)
111 continue;
112 pr = pci_find_parent_resource(dev, r);
113 if (!r->start || !pr ||
114 request_resource(pr, r) < 0) {
115 printk(KERN_ERR "PCI: Cannot allocate "
116 "resource region %d "
117 "of bridge %s\n",
118 idx, pci_name(dev));
119 /*
120 * Something is wrong with the region.
121 * Invalidate the resource to prevent
122 * child resource allocations in this
123 * range.
124 */
125 r->flags = 0;
126 }
127 }
128 }
129 pcibios_allocate_bus_resources(&bus->children);
130 }
131}
132
133static void __init pcibios_allocate_resources(int pass)
134{
135 struct pci_dev *dev = NULL;
136 int idx, disabled;
137 u16 command;
138 struct resource *r, *pr;
139
140 for_each_pci_dev(dev) {
141 pci_read_config_word(dev, PCI_COMMAND, &command);
142 for (idx = 0; idx < PCI_ROM_RESOURCE; idx++) {
143 r = &dev->resource[idx];
144 if (r->parent) /* Already allocated */
145 continue;
146 if (!r->start) /* Address not assigned at all */
147 continue;
148 if (r->flags & IORESOURCE_IO)
149 disabled = !(command & PCI_COMMAND_IO);
150 else
151 disabled = !(command & PCI_COMMAND_MEMORY);
152 if (pass == disabled) {
153 DBG("PCI: Resource %08lx-%08lx "
154 "(f=%lx, d=%d, p=%d)\n",
155 r->start, r->end, r->flags, disabled, pass);
156 pr = pci_find_parent_resource(dev, r);
157 if (!pr || request_resource(pr, r) < 0) {
158 printk(KERN_ERR "PCI: Cannot allocate "
159 "resource region %d "
160 "of device %s\n",
161 idx, pci_name(dev));
162 /* We'll assign a new address later */
163 r->end -= r->start;
164 r->start = 0;
165 }
166 }
167 }
168 if (!pass) {
169 r = &dev->resource[PCI_ROM_RESOURCE];
170 if (r->flags & IORESOURCE_ROM_ENABLE) {
171 /* Turn the ROM off, leave the resource region,
172 * but keep it unregistered. */
173 u32 reg;
174 DBG("PCI: Switching off ROM of %s\n",
175 pci_name(dev));
176 r->flags &= ~IORESOURCE_ROM_ENABLE;
177 pci_read_config_dword(dev,
178 dev->rom_base_reg, &reg);
179 pci_write_config_dword(dev, dev->rom_base_reg,
180 reg & ~PCI_ROM_ADDRESS_ENABLE);
181 }
182 }
183 }
184}
185
186static int __init pcibios_assign_resources(void)
187{
188 struct pci_dev *dev = NULL;
189 struct resource *r, *pr;
190
191 if (!(pci_probe & PCI_ASSIGN_ROMS)) {
192 /*
193 * Try to use BIOS settings for ROMs, otherwise let
194 * pci_assign_unassigned_resources() allocate the new
195 * addresses.
196 */
197 for_each_pci_dev(dev) {
198 r = &dev->resource[PCI_ROM_RESOURCE];
199 if (!r->flags || !r->start)
200 continue;
201 pr = pci_find_parent_resource(dev, r);
202 if (!pr || request_resource(pr, r) < 0) {
203 r->end -= r->start;
204 r->start = 0;
205 }
206 }
207 }
208
209 pci_assign_unassigned_resources();
210
211 return 0;
212}
213
214void __init pcibios_resource_survey(void)
215{
216 DBG("PCI: Allocating resources\n");
217 pcibios_allocate_bus_resources(&pci_root_buses);
218 pcibios_allocate_resources(0);
219 pcibios_allocate_resources(1);
220}
221
222/**
223 * called in fs_initcall (one below subsys_initcall),
224 * give a chance for motherboard reserve resources
225 */
226fs_initcall(pcibios_assign_resources);
227
228int pcibios_enable_resources(struct pci_dev *dev, int mask)
229{
230 u16 cmd, old_cmd;
231 int idx;
232 struct resource *r;
233
234 pci_read_config_word(dev, PCI_COMMAND, &cmd);
235 old_cmd = cmd;
236 for (idx = 0; idx < PCI_NUM_RESOURCES; idx++) {
237 /* Only set up the requested stuff */
238 if (!(mask & (1 << idx)))
239 continue;
240
241 r = &dev->resource[idx];
242 if (!(r->flags & (IORESOURCE_IO | IORESOURCE_MEM)))
243 continue;
244 if ((idx == PCI_ROM_RESOURCE) &&
245 (!(r->flags & IORESOURCE_ROM_ENABLE)))
246 continue;
247 if (!r->start && r->end) {
248 printk(KERN_ERR "PCI: Device %s not available "
249 "because of resource %d collisions\n",
250 pci_name(dev), idx);
251 return -EINVAL;
252 }
253 if (r->flags & IORESOURCE_IO)
254 cmd |= PCI_COMMAND_IO;
255 if (r->flags & IORESOURCE_MEM)
256 cmd |= PCI_COMMAND_MEMORY;
257 }
258 if (cmd != old_cmd) {
259 printk("PCI: Enabling device %s (%04x -> %04x)\n",
260 pci_name(dev), old_cmd, cmd);
261 pci_write_config_word(dev, PCI_COMMAND, cmd);
262 }
263 return 0;
264}
265
266/*
267 * If we set up a device for bus mastering, we need to check the latency
268 * timer as certain crappy BIOSes forget to set it properly.
269 */
270unsigned int pcibios_max_latency = 255;
271
272void pcibios_set_master(struct pci_dev *dev)
273{
274 u8 lat;
275 pci_read_config_byte(dev, PCI_LATENCY_TIMER, &lat);
276 if (lat < 16)
277 lat = (64 <= pcibios_max_latency) ? 64 : pcibios_max_latency;
278 else if (lat > pcibios_max_latency)
279 lat = pcibios_max_latency;
280 else
281 return;
282 printk(KERN_DEBUG "PCI: Setting latency timer of device %s to %d\n",
283 pci_name(dev), lat);
284 pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat);
285}
286
287int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
288 enum pci_mmap_state mmap_state, int write_combine)
289{
290 unsigned long prot;
291
292 /* I/O space cannot be accessed via normal processor loads and
293 * stores on this platform.
294 */
295 if (mmap_state == pci_mmap_io)
296 return -EINVAL;
297
298 /* Leave vm_pgoff as-is, the PCI space address is the physical
299 * address on this platform.
300 */
301 prot = pgprot_val(vma->vm_page_prot);
302 if (boot_cpu_data.x86 > 3)
303 prot |= _PAGE_PCD | _PAGE_PWT;
304 vma->vm_page_prot = __pgprot(prot);
305
306 /* Write-combine setting is ignored, it is changed via the mtrr
307 * interfaces on this platform.
308 */
309 if (io_remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff,
310 vma->vm_end - vma->vm_start,
311 vma->vm_page_prot))
312 return -EAGAIN;
313
314 return 0;
315}
diff --git a/arch/i386/pci/init.c b/arch/i386/pci/init.c
deleted file mode 100644
index 3de9f9ba2da6..000000000000
--- a/arch/i386/pci/init.c
+++ /dev/null
@@ -1,37 +0,0 @@
1#include <linux/pci.h>
2#include <linux/init.h>
3#include "pci.h"
4
5/* arch_initcall has too random ordering, so call the initializers
6 in the right sequence from here. */
7static __init int pci_access_init(void)
8{
9 int type __maybe_unused = 0;
10
11#ifdef CONFIG_PCI_DIRECT
12 type = pci_direct_probe();
13#endif
14#ifdef CONFIG_PCI_MMCONFIG
15 pci_mmcfg_init(type);
16#endif
17 if (raw_pci_ops)
18 return 0;
19#ifdef CONFIG_PCI_BIOS
20 pci_pcbios_init();
21#endif
22 /*
23 * don't check for raw_pci_ops here because we want pcbios as last
24 * fallback, yet it's needed to run first to set pcibios_last_bus
25 * in case legacy PCI probing is used. otherwise detecting peer busses
26 * fails.
27 */
28#ifdef CONFIG_PCI_DIRECT
29 pci_direct_init(type);
30#endif
31 if (!raw_pci_ops)
32 printk(KERN_ERR
33 "PCI: Fatal: No config space access function found\n");
34
35 return 0;
36}
37arch_initcall(pci_access_init);
diff --git a/arch/i386/pci/irq.c b/arch/i386/pci/irq.c
deleted file mode 100644
index 8434f2323b87..000000000000
--- a/arch/i386/pci/irq.c
+++ /dev/null
@@ -1,1173 +0,0 @@
1/*
2 * Low-Level PCI Support for PC -- Routing of Interrupts
3 *
4 * (c) 1999--2000 Martin Mares <mj@ucw.cz>
5 */
6
7#include <linux/types.h>
8#include <linux/kernel.h>
9#include <linux/pci.h>
10#include <linux/init.h>
11#include <linux/slab.h>
12#include <linux/interrupt.h>
13#include <linux/dmi.h>
14#include <asm/io.h>
15#include <asm/smp.h>
16#include <asm/io_apic.h>
17#include <linux/irq.h>
18#include <linux/acpi.h>
19
20#include "pci.h"
21
22#define PIRQ_SIGNATURE (('$' << 0) + ('P' << 8) + ('I' << 16) + ('R' << 24))
23#define PIRQ_VERSION 0x0100
24
25static int broken_hp_bios_irq9;
26static int acer_tm360_irqrouting;
27
28static struct irq_routing_table *pirq_table;
29
30static int pirq_enable_irq(struct pci_dev *dev);
31
32/*
33 * Never use: 0, 1, 2 (timer, keyboard, and cascade)
34 * Avoid using: 13, 14 and 15 (FP error and IDE).
35 * Penalize: 3, 4, 6, 7, 12 (known ISA uses: serial, floppy, parallel and mouse)
36 */
37unsigned int pcibios_irq_mask = 0xfff8;
38
39static int pirq_penalty[16] = {
40 1000000, 1000000, 1000000, 1000, 1000, 0, 1000, 1000,
41 0, 0, 0, 0, 1000, 100000, 100000, 100000
42};
43
44struct irq_router {
45 char *name;
46 u16 vendor, device;
47 int (*get)(struct pci_dev *router, struct pci_dev *dev, int pirq);
48 int (*set)(struct pci_dev *router, struct pci_dev *dev, int pirq, int new);
49};
50
51struct irq_router_handler {
52 u16 vendor;
53 int (*probe)(struct irq_router *r, struct pci_dev *router, u16 device);
54};
55
56int (*pcibios_enable_irq)(struct pci_dev *dev) = NULL;
57void (*pcibios_disable_irq)(struct pci_dev *dev) = NULL;
58
59/*
60 * Check passed address for the PCI IRQ Routing Table signature
61 * and perform checksum verification.
62 */
63
64static inline struct irq_routing_table * pirq_check_routing_table(u8 *addr)
65{
66 struct irq_routing_table *rt;
67 int i;
68 u8 sum;
69
70 rt = (struct irq_routing_table *) addr;
71 if (rt->signature != PIRQ_SIGNATURE ||
72 rt->version != PIRQ_VERSION ||
73 rt->size % 16 ||
74 rt->size < sizeof(struct irq_routing_table))
75 return NULL;
76 sum = 0;
77 for (i=0; i < rt->size; i++)
78 sum += addr[i];
79 if (!sum) {
80 DBG(KERN_DEBUG "PCI: Interrupt Routing Table found at 0x%p\n", rt);
81 return rt;
82 }
83 return NULL;
84}
85
86
87
88/*
89 * Search 0xf0000 -- 0xfffff for the PCI IRQ Routing Table.
90 */
91
92static struct irq_routing_table * __init pirq_find_routing_table(void)
93{
94 u8 *addr;
95 struct irq_routing_table *rt;
96
97 if (pirq_table_addr) {
98 rt = pirq_check_routing_table((u8 *) __va(pirq_table_addr));
99 if (rt)
100 return rt;
101 printk(KERN_WARNING "PCI: PIRQ table NOT found at pirqaddr\n");
102 }
103 for(addr = (u8 *) __va(0xf0000); addr < (u8 *) __va(0x100000); addr += 16) {
104 rt = pirq_check_routing_table(addr);
105 if (rt)
106 return rt;
107 }
108 return NULL;
109}
110
111/*
112 * If we have a IRQ routing table, use it to search for peer host
113 * bridges. It's a gross hack, but since there are no other known
114 * ways how to get a list of buses, we have to go this way.
115 */
116
117static void __init pirq_peer_trick(void)
118{
119 struct irq_routing_table *rt = pirq_table;
120 u8 busmap[256];
121 int i;
122 struct irq_info *e;
123
124 memset(busmap, 0, sizeof(busmap));
125 for(i=0; i < (rt->size - sizeof(struct irq_routing_table)) / sizeof(struct irq_info); i++) {
126 e = &rt->slots[i];
127#ifdef DEBUG
128 {
129 int j;
130 DBG(KERN_DEBUG "%02x:%02x slot=%02x", e->bus, e->devfn/8, e->slot);
131 for(j=0; j<4; j++)
132 DBG(" %d:%02x/%04x", j, e->irq[j].link, e->irq[j].bitmap);
133 DBG("\n");
134 }
135#endif
136 busmap[e->bus] = 1;
137 }
138 for(i = 1; i < 256; i++) {
139 if (!busmap[i] || pci_find_bus(0, i))
140 continue;
141 if (pci_scan_bus_with_sysdata(i))
142 printk(KERN_INFO "PCI: Discovered primary peer "
143 "bus %02x [IRQ]\n", i);
144 }
145 pcibios_last_bus = -1;
146}
147
148/*
149 * Code for querying and setting of IRQ routes on various interrupt routers.
150 */
151
152void eisa_set_level_irq(unsigned int irq)
153{
154 unsigned char mask = 1 << (irq & 7);
155 unsigned int port = 0x4d0 + (irq >> 3);
156 unsigned char val;
157 static u16 eisa_irq_mask;
158
159 if (irq >= 16 || (1 << irq) & eisa_irq_mask)
160 return;
161
162 eisa_irq_mask |= (1 << irq);
163 printk(KERN_DEBUG "PCI: setting IRQ %u as level-triggered\n", irq);
164 val = inb(port);
165 if (!(val & mask)) {
166 DBG(KERN_DEBUG " -> edge");
167 outb(val | mask, port);
168 }
169}
170
171/*
172 * Common IRQ routing practice: nybbles in config space,
173 * offset by some magic constant.
174 */
175static unsigned int read_config_nybble(struct pci_dev *router, unsigned offset, unsigned nr)
176{
177 u8 x;
178 unsigned reg = offset + (nr >> 1);
179
180 pci_read_config_byte(router, reg, &x);
181 return (nr & 1) ? (x >> 4) : (x & 0xf);
182}
183
184static void write_config_nybble(struct pci_dev *router, unsigned offset, unsigned nr, unsigned int val)
185{
186 u8 x;
187 unsigned reg = offset + (nr >> 1);
188
189 pci_read_config_byte(router, reg, &x);
190 x = (nr & 1) ? ((x & 0x0f) | (val << 4)) : ((x & 0xf0) | val);
191 pci_write_config_byte(router, reg, x);
192}
193
194/*
195 * ALI pirq entries are damn ugly, and completely undocumented.
196 * This has been figured out from pirq tables, and it's not a pretty
197 * picture.
198 */
199static int pirq_ali_get(struct pci_dev *router, struct pci_dev *dev, int pirq)
200{
201 static const unsigned char irqmap[16] = { 0, 9, 3, 10, 4, 5, 7, 6, 1, 11, 0, 12, 0, 14, 0, 15 };
202
203 return irqmap[read_config_nybble(router, 0x48, pirq-1)];
204}
205
206static int pirq_ali_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq)
207{
208 static const unsigned char irqmap[16] = { 0, 8, 0, 2, 4, 5, 7, 6, 0, 1, 3, 9, 11, 0, 13, 15 };
209 unsigned int val = irqmap[irq];
210
211 if (val) {
212 write_config_nybble(router, 0x48, pirq-1, val);
213 return 1;
214 }
215 return 0;
216}
217
218/*
219 * The Intel PIIX4 pirq rules are fairly simple: "pirq" is
220 * just a pointer to the config space.
221 */
222static int pirq_piix_get(struct pci_dev *router, struct pci_dev *dev, int pirq)
223{
224 u8 x;
225
226 pci_read_config_byte(router, pirq, &x);
227 return (x < 16) ? x : 0;
228}
229
230static int pirq_piix_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq)
231{
232 pci_write_config_byte(router, pirq, irq);
233 return 1;
234}
235
236/*
237 * The VIA pirq rules are nibble-based, like ALI,
238 * but without the ugly irq number munging.
239 * However, PIRQD is in the upper instead of lower 4 bits.
240 */
241static int pirq_via_get(struct pci_dev *router, struct pci_dev *dev, int pirq)
242{
243 return read_config_nybble(router, 0x55, pirq == 4 ? 5 : pirq);
244}
245
246static int pirq_via_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq)
247{
248 write_config_nybble(router, 0x55, pirq == 4 ? 5 : pirq, irq);
249 return 1;
250}
251
252/*
253 * The VIA pirq rules are nibble-based, like ALI,
254 * but without the ugly irq number munging.
255 * However, for 82C586, nibble map is different .
256 */
257static int pirq_via586_get(struct pci_dev *router, struct pci_dev *dev, int pirq)
258{
259 static const unsigned int pirqmap[5] = { 3, 2, 5, 1, 1 };
260 return read_config_nybble(router, 0x55, pirqmap[pirq-1]);
261}
262
263static int pirq_via586_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq)
264{
265 static const unsigned int pirqmap[5] = { 3, 2, 5, 1, 1 };
266 write_config_nybble(router, 0x55, pirqmap[pirq-1], irq);
267 return 1;
268}
269
270/*
271 * ITE 8330G pirq rules are nibble-based
272 * FIXME: pirqmap may be { 1, 0, 3, 2 },
273 * 2+3 are both mapped to irq 9 on my system
274 */
275static int pirq_ite_get(struct pci_dev *router, struct pci_dev *dev, int pirq)
276{
277 static const unsigned char pirqmap[4] = { 1, 0, 2, 3 };
278 return read_config_nybble(router,0x43, pirqmap[pirq-1]);
279}
280
281static int pirq_ite_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq)
282{
283 static const unsigned char pirqmap[4] = { 1, 0, 2, 3 };
284 write_config_nybble(router, 0x43, pirqmap[pirq-1], irq);
285 return 1;
286}
287
288/*
289 * OPTI: high four bits are nibble pointer..
290 * I wonder what the low bits do?
291 */
292static int pirq_opti_get(struct pci_dev *router, struct pci_dev *dev, int pirq)
293{
294 return read_config_nybble(router, 0xb8, pirq >> 4);
295}
296
297static int pirq_opti_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq)
298{
299 write_config_nybble(router, 0xb8, pirq >> 4, irq);
300 return 1;
301}
302
303/*
304 * Cyrix: nibble offset 0x5C
305 * 0x5C bits 7:4 is INTB bits 3:0 is INTA
306 * 0x5D bits 7:4 is INTD bits 3:0 is INTC
307 */
308static int pirq_cyrix_get(struct pci_dev *router, struct pci_dev *dev, int pirq)
309{
310 return read_config_nybble(router, 0x5C, (pirq-1)^1);
311}
312
313static int pirq_cyrix_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq)
314{
315 write_config_nybble(router, 0x5C, (pirq-1)^1, irq);
316 return 1;
317}
318
319/*
320 * PIRQ routing for SiS 85C503 router used in several SiS chipsets.
321 * We have to deal with the following issues here:
322 * - vendors have different ideas about the meaning of link values
323 * - some onboard devices (integrated in the chipset) have special
324 * links and are thus routed differently (i.e. not via PCI INTA-INTD)
325 * - different revision of the router have a different layout for
326 * the routing registers, particularly for the onchip devices
327 *
328 * For all routing registers the common thing is we have one byte
329 * per routeable link which is defined as:
330 * bit 7 IRQ mapping enabled (0) or disabled (1)
331 * bits [6:4] reserved (sometimes used for onchip devices)
332 * bits [3:0] IRQ to map to
333 * allowed: 3-7, 9-12, 14-15
334 * reserved: 0, 1, 2, 8, 13
335 *
336 * The config-space registers located at 0x41/0x42/0x43/0x44 are
337 * always used to route the normal PCI INT A/B/C/D respectively.
338 * Apparently there are systems implementing PCI routing table using
339 * link values 0x01-0x04 and others using 0x41-0x44 for PCI INTA..D.
340 * We try our best to handle both link mappings.
341 *
342 * Currently (2003-05-21) it appears most SiS chipsets follow the
343 * definition of routing registers from the SiS-5595 southbridge.
344 * According to the SiS 5595 datasheets the revision id's of the
345 * router (ISA-bridge) should be 0x01 or 0xb0.
346 *
347 * Furthermore we've also seen lspci dumps with revision 0x00 and 0xb1.
348 * Looks like these are used in a number of SiS 5xx/6xx/7xx chipsets.
349 * They seem to work with the current routing code. However there is
350 * some concern because of the two USB-OHCI HCs (original SiS 5595
351 * had only one). YMMV.
352 *
353 * Onchip routing for router rev-id 0x01/0xb0 and probably 0x00/0xb1:
354 *
355 * 0x61: IDEIRQ:
356 * bits [6:5] must be written 01
357 * bit 4 channel-select primary (0), secondary (1)
358 *
359 * 0x62: USBIRQ:
360 * bit 6 OHCI function disabled (0), enabled (1)
361 *
362 * 0x6a: ACPI/SCI IRQ: bits 4-6 reserved
363 *
364 * 0x7e: Data Acq. Module IRQ - bits 4-6 reserved
365 *
366 * We support USBIRQ (in addition to INTA-INTD) and keep the
367 * IDE, ACPI and DAQ routing untouched as set by the BIOS.
368 *
369 * Currently the only reported exception is the new SiS 65x chipset
370 * which includes the SiS 69x southbridge. Here we have the 85C503
371 * router revision 0x04 and there are changes in the register layout
372 * mostly related to the different USB HCs with USB 2.0 support.
373 *
374 * Onchip routing for router rev-id 0x04 (try-and-error observation)
375 *
376 * 0x60/0x61/0x62/0x63: 1xEHCI and 3xOHCI (companion) USB-HCs
377 * bit 6-4 are probably unused, not like 5595
378 */
379
380#define PIRQ_SIS_IRQ_MASK 0x0f
381#define PIRQ_SIS_IRQ_DISABLE 0x80
382#define PIRQ_SIS_USB_ENABLE 0x40
383
384static int pirq_sis_get(struct pci_dev *router, struct pci_dev *dev, int pirq)
385{
386 u8 x;
387 int reg;
388
389 reg = pirq;
390 if (reg >= 0x01 && reg <= 0x04)
391 reg += 0x40;
392 pci_read_config_byte(router, reg, &x);
393 return (x & PIRQ_SIS_IRQ_DISABLE) ? 0 : (x & PIRQ_SIS_IRQ_MASK);
394}
395
396static int pirq_sis_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq)
397{
398 u8 x;
399 int reg;
400
401 reg = pirq;
402 if (reg >= 0x01 && reg <= 0x04)
403 reg += 0x40;
404 pci_read_config_byte(router, reg, &x);
405 x &= ~(PIRQ_SIS_IRQ_MASK | PIRQ_SIS_IRQ_DISABLE);
406 x |= irq ? irq: PIRQ_SIS_IRQ_DISABLE;
407 pci_write_config_byte(router, reg, x);
408 return 1;
409}
410
411
412/*
413 * VLSI: nibble offset 0x74 - educated guess due to routing table and
414 * config space of VLSI 82C534 PCI-bridge/router (1004:0102)
415 * Tested on HP OmniBook 800 covering PIRQ 1, 2, 4, 8 for onboard
416 * devices, PIRQ 3 for non-pci(!) soundchip and (untested) PIRQ 6
417 * for the busbridge to the docking station.
418 */
419
420static int pirq_vlsi_get(struct pci_dev *router, struct pci_dev *dev, int pirq)
421{
422 if (pirq > 8) {
423 printk(KERN_INFO "VLSI router pirq escape (%d)\n", pirq);
424 return 0;
425 }
426 return read_config_nybble(router, 0x74, pirq-1);
427}
428
429static int pirq_vlsi_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq)
430{
431 if (pirq > 8) {
432 printk(KERN_INFO "VLSI router pirq escape (%d)\n", pirq);
433 return 0;
434 }
435 write_config_nybble(router, 0x74, pirq-1, irq);
436 return 1;
437}
438
439/*
440 * ServerWorks: PCI interrupts mapped to system IRQ lines through Index
441 * and Redirect I/O registers (0x0c00 and 0x0c01). The Index register
442 * format is (PCIIRQ## | 0x10), e.g.: PCIIRQ10=0x1a. The Redirect
443 * register is a straight binary coding of desired PIC IRQ (low nibble).
444 *
445 * The 'link' value in the PIRQ table is already in the correct format
446 * for the Index register. There are some special index values:
447 * 0x00 for ACPI (SCI), 0x01 for USB, 0x02 for IDE0, 0x04 for IDE1,
448 * and 0x03 for SMBus.
449 */
450static int pirq_serverworks_get(struct pci_dev *router, struct pci_dev *dev, int pirq)
451{
452 outb_p(pirq, 0xc00);
453 return inb(0xc01) & 0xf;
454}
455
456static int pirq_serverworks_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq)
457{
458 outb_p(pirq, 0xc00);
459 outb_p(irq, 0xc01);
460 return 1;
461}
462
463/* Support for AMD756 PCI IRQ Routing
464 * Jhon H. Caicedo <jhcaiced@osso.org.co>
465 * Jun/21/2001 0.2.0 Release, fixed to use "nybble" functions... (jhcaiced)
466 * Jun/19/2001 Alpha Release 0.1.0 (jhcaiced)
467 * The AMD756 pirq rules are nibble-based
468 * offset 0x56 0-3 PIRQA 4-7 PIRQB
469 * offset 0x57 0-3 PIRQC 4-7 PIRQD
470 */
471static int pirq_amd756_get(struct pci_dev *router, struct pci_dev *dev, int pirq)
472{
473 u8 irq;
474 irq = 0;
475 if (pirq <= 4)
476 {
477 irq = read_config_nybble(router, 0x56, pirq - 1);
478 }
479 printk(KERN_INFO "AMD756: dev %04x:%04x, router pirq : %d get irq : %2d\n",
480 dev->vendor, dev->device, pirq, irq);
481 return irq;
482}
483
484static int pirq_amd756_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq)
485{
486 printk(KERN_INFO "AMD756: dev %04x:%04x, router pirq : %d SET irq : %2d\n",
487 dev->vendor, dev->device, pirq, irq);
488 if (pirq <= 4)
489 {
490 write_config_nybble(router, 0x56, pirq - 1, irq);
491 }
492 return 1;
493}
494
495#ifdef CONFIG_PCI_BIOS
496
497static int pirq_bios_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq)
498{
499 struct pci_dev *bridge;
500 int pin = pci_get_interrupt_pin(dev, &bridge);
501 return pcibios_set_irq_routing(bridge, pin, irq);
502}
503
504#endif
505
506static __init int intel_router_probe(struct irq_router *r, struct pci_dev *router, u16 device)
507{
508 static struct pci_device_id __initdata pirq_440gx[] = {
509 { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443GX_0) },
510 { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443GX_2) },
511 { },
512 };
513
514 /* 440GX has a proprietary PIRQ router -- don't use it */
515 if (pci_dev_present(pirq_440gx))
516 return 0;
517
518 switch(device)
519 {
520 case PCI_DEVICE_ID_INTEL_82371FB_0:
521 case PCI_DEVICE_ID_INTEL_82371SB_0:
522 case PCI_DEVICE_ID_INTEL_82371AB_0:
523 case PCI_DEVICE_ID_INTEL_82371MX:
524 case PCI_DEVICE_ID_INTEL_82443MX_0:
525 case PCI_DEVICE_ID_INTEL_82801AA_0:
526 case PCI_DEVICE_ID_INTEL_82801AB_0:
527 case PCI_DEVICE_ID_INTEL_82801BA_0:
528 case PCI_DEVICE_ID_INTEL_82801BA_10:
529 case PCI_DEVICE_ID_INTEL_82801CA_0:
530 case PCI_DEVICE_ID_INTEL_82801CA_12:
531 case PCI_DEVICE_ID_INTEL_82801DB_0:
532 case PCI_DEVICE_ID_INTEL_82801E_0:
533 case PCI_DEVICE_ID_INTEL_82801EB_0:
534 case PCI_DEVICE_ID_INTEL_ESB_1:
535 case PCI_DEVICE_ID_INTEL_ICH6_0:
536 case PCI_DEVICE_ID_INTEL_ICH6_1:
537 case PCI_DEVICE_ID_INTEL_ICH7_0:
538 case PCI_DEVICE_ID_INTEL_ICH7_1:
539 case PCI_DEVICE_ID_INTEL_ICH7_30:
540 case PCI_DEVICE_ID_INTEL_ICH7_31:
541 case PCI_DEVICE_ID_INTEL_ESB2_0:
542 case PCI_DEVICE_ID_INTEL_ICH8_0:
543 case PCI_DEVICE_ID_INTEL_ICH8_1:
544 case PCI_DEVICE_ID_INTEL_ICH8_2:
545 case PCI_DEVICE_ID_INTEL_ICH8_3:
546 case PCI_DEVICE_ID_INTEL_ICH8_4:
547 case PCI_DEVICE_ID_INTEL_ICH9_0:
548 case PCI_DEVICE_ID_INTEL_ICH9_1:
549 case PCI_DEVICE_ID_INTEL_ICH9_2:
550 case PCI_DEVICE_ID_INTEL_ICH9_3:
551 case PCI_DEVICE_ID_INTEL_ICH9_4:
552 case PCI_DEVICE_ID_INTEL_ICH9_5:
553 case PCI_DEVICE_ID_INTEL_TOLAPAI_0:
554 r->name = "PIIX/ICH";
555 r->get = pirq_piix_get;
556 r->set = pirq_piix_set;
557 return 1;
558 }
559 return 0;
560}
561
562static __init int via_router_probe(struct irq_router *r,
563 struct pci_dev *router, u16 device)
564{
565 /* FIXME: We should move some of the quirk fixup stuff here */
566
567 /*
568 * work arounds for some buggy BIOSes
569 */
570 if (device == PCI_DEVICE_ID_VIA_82C586_0) {
571 switch(router->device) {
572 case PCI_DEVICE_ID_VIA_82C686:
573 /*
574 * Asus k7m bios wrongly reports 82C686A
575 * as 586-compatible
576 */
577 device = PCI_DEVICE_ID_VIA_82C686;
578 break;
579 case PCI_DEVICE_ID_VIA_8235:
580 /**
581 * Asus a7v-x bios wrongly reports 8235
582 * as 586-compatible
583 */
584 device = PCI_DEVICE_ID_VIA_8235;
585 break;
586 }
587 }
588
589 switch(device) {
590 case PCI_DEVICE_ID_VIA_82C586_0:
591 r->name = "VIA";
592 r->get = pirq_via586_get;
593 r->set = pirq_via586_set;
594 return 1;
595 case PCI_DEVICE_ID_VIA_82C596:
596 case PCI_DEVICE_ID_VIA_82C686:
597 case PCI_DEVICE_ID_VIA_8231:
598 case PCI_DEVICE_ID_VIA_8233A:
599 case PCI_DEVICE_ID_VIA_8235:
600 case PCI_DEVICE_ID_VIA_8237:
601 /* FIXME: add new ones for 8233/5 */
602 r->name = "VIA";
603 r->get = pirq_via_get;
604 r->set = pirq_via_set;
605 return 1;
606 }
607 return 0;
608}
609
610static __init int vlsi_router_probe(struct irq_router *r, struct pci_dev *router, u16 device)
611{
612 switch(device)
613 {
614 case PCI_DEVICE_ID_VLSI_82C534:
615 r->name = "VLSI 82C534";
616 r->get = pirq_vlsi_get;
617 r->set = pirq_vlsi_set;
618 return 1;
619 }
620 return 0;
621}
622
623
624static __init int serverworks_router_probe(struct irq_router *r, struct pci_dev *router, u16 device)
625{
626 switch(device)
627 {
628 case PCI_DEVICE_ID_SERVERWORKS_OSB4:
629 case PCI_DEVICE_ID_SERVERWORKS_CSB5:
630 r->name = "ServerWorks";
631 r->get = pirq_serverworks_get;
632 r->set = pirq_serverworks_set;
633 return 1;
634 }
635 return 0;
636}
637
638static __init int sis_router_probe(struct irq_router *r, struct pci_dev *router, u16 device)
639{
640 if (device != PCI_DEVICE_ID_SI_503)
641 return 0;
642
643 r->name = "SIS";
644 r->get = pirq_sis_get;
645 r->set = pirq_sis_set;
646 return 1;
647}
648
649static __init int cyrix_router_probe(struct irq_router *r, struct pci_dev *router, u16 device)
650{
651 switch(device)
652 {
653 case PCI_DEVICE_ID_CYRIX_5520:
654 r->name = "NatSemi";
655 r->get = pirq_cyrix_get;
656 r->set = pirq_cyrix_set;
657 return 1;
658 }
659 return 0;
660}
661
662static __init int opti_router_probe(struct irq_router *r, struct pci_dev *router, u16 device)
663{
664 switch(device)
665 {
666 case PCI_DEVICE_ID_OPTI_82C700:
667 r->name = "OPTI";
668 r->get = pirq_opti_get;
669 r->set = pirq_opti_set;
670 return 1;
671 }
672 return 0;
673}
674
675static __init int ite_router_probe(struct irq_router *r, struct pci_dev *router, u16 device)
676{
677 switch(device)
678 {
679 case PCI_DEVICE_ID_ITE_IT8330G_0:
680 r->name = "ITE";
681 r->get = pirq_ite_get;
682 r->set = pirq_ite_set;
683 return 1;
684 }
685 return 0;
686}
687
688static __init int ali_router_probe(struct irq_router *r, struct pci_dev *router, u16 device)
689{
690 switch(device)
691 {
692 case PCI_DEVICE_ID_AL_M1533:
693 case PCI_DEVICE_ID_AL_M1563:
694 printk(KERN_DEBUG "PCI: Using ALI IRQ Router\n");
695 r->name = "ALI";
696 r->get = pirq_ali_get;
697 r->set = pirq_ali_set;
698 return 1;
699 }
700 return 0;
701}
702
703static __init int amd_router_probe(struct irq_router *r, struct pci_dev *router, u16 device)
704{
705 switch(device)
706 {
707 case PCI_DEVICE_ID_AMD_VIPER_740B:
708 r->name = "AMD756";
709 break;
710 case PCI_DEVICE_ID_AMD_VIPER_7413:
711 r->name = "AMD766";
712 break;
713 case PCI_DEVICE_ID_AMD_VIPER_7443:
714 r->name = "AMD768";
715 break;
716 default:
717 return 0;
718 }
719 r->get = pirq_amd756_get;
720 r->set = pirq_amd756_set;
721 return 1;
722}
723
724static __initdata struct irq_router_handler pirq_routers[] = {
725 { PCI_VENDOR_ID_INTEL, intel_router_probe },
726 { PCI_VENDOR_ID_AL, ali_router_probe },
727 { PCI_VENDOR_ID_ITE, ite_router_probe },
728 { PCI_VENDOR_ID_VIA, via_router_probe },
729 { PCI_VENDOR_ID_OPTI, opti_router_probe },
730 { PCI_VENDOR_ID_SI, sis_router_probe },
731 { PCI_VENDOR_ID_CYRIX, cyrix_router_probe },
732 { PCI_VENDOR_ID_VLSI, vlsi_router_probe },
733 { PCI_VENDOR_ID_SERVERWORKS, serverworks_router_probe },
734 { PCI_VENDOR_ID_AMD, amd_router_probe },
735 /* Someone with docs needs to add the ATI Radeon IGP */
736 { 0, NULL }
737};
738static struct irq_router pirq_router;
739static struct pci_dev *pirq_router_dev;
740
741
742/*
743 * FIXME: should we have an option to say "generic for
744 * chipset" ?
745 */
746
747static void __init pirq_find_router(struct irq_router *r)
748{
749 struct irq_routing_table *rt = pirq_table;
750 struct irq_router_handler *h;
751
752#ifdef CONFIG_PCI_BIOS
753 if (!rt->signature) {
754 printk(KERN_INFO "PCI: Using BIOS for IRQ routing\n");
755 r->set = pirq_bios_set;
756 r->name = "BIOS";
757 return;
758 }
759#endif
760
761 /* Default unless a driver reloads it */
762 r->name = "default";
763 r->get = NULL;
764 r->set = NULL;
765
766 DBG(KERN_DEBUG "PCI: Attempting to find IRQ router for %04x:%04x\n",
767 rt->rtr_vendor, rt->rtr_device);
768
769 pirq_router_dev = pci_get_bus_and_slot(rt->rtr_bus, rt->rtr_devfn);
770 if (!pirq_router_dev) {
771 DBG(KERN_DEBUG "PCI: Interrupt router not found at "
772 "%02x:%02x\n", rt->rtr_bus, rt->rtr_devfn);
773 return;
774 }
775
776 for( h = pirq_routers; h->vendor; h++) {
777 /* First look for a router match */
778 if (rt->rtr_vendor == h->vendor && h->probe(r, pirq_router_dev, rt->rtr_device))
779 break;
780 /* Fall back to a device match */
781 if (pirq_router_dev->vendor == h->vendor && h->probe(r, pirq_router_dev, pirq_router_dev->device))
782 break;
783 }
784 printk(KERN_INFO "PCI: Using IRQ router %s [%04x/%04x] at %s\n",
785 pirq_router.name,
786 pirq_router_dev->vendor,
787 pirq_router_dev->device,
788 pci_name(pirq_router_dev));
789
790 /* The device remains referenced for the kernel lifetime */
791}
792
793static struct irq_info *pirq_get_info(struct pci_dev *dev)
794{
795 struct irq_routing_table *rt = pirq_table;
796 int entries = (rt->size - sizeof(struct irq_routing_table)) / sizeof(struct irq_info);
797 struct irq_info *info;
798
799 for (info = rt->slots; entries--; info++)
800 if (info->bus == dev->bus->number && PCI_SLOT(info->devfn) == PCI_SLOT(dev->devfn))
801 return info;
802 return NULL;
803}
804
805static int pcibios_lookup_irq(struct pci_dev *dev, int assign)
806{
807 u8 pin;
808 struct irq_info *info;
809 int i, pirq, newirq;
810 int irq = 0;
811 u32 mask;
812 struct irq_router *r = &pirq_router;
813 struct pci_dev *dev2 = NULL;
814 char *msg = NULL;
815
816 /* Find IRQ pin */
817 pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin);
818 if (!pin) {
819 DBG(KERN_DEBUG " -> no interrupt pin\n");
820 return 0;
821 }
822 pin = pin - 1;
823
824 /* Find IRQ routing entry */
825
826 if (!pirq_table)
827 return 0;
828
829 DBG(KERN_DEBUG "IRQ for %s[%c]", pci_name(dev), 'A' + pin);
830 info = pirq_get_info(dev);
831 if (!info) {
832 DBG(" -> not found in routing table\n" KERN_DEBUG);
833 return 0;
834 }
835 pirq = info->irq[pin].link;
836 mask = info->irq[pin].bitmap;
837 if (!pirq) {
838 DBG(" -> not routed\n" KERN_DEBUG);
839 return 0;
840 }
841 DBG(" -> PIRQ %02x, mask %04x, excl %04x", pirq, mask, pirq_table->exclusive_irqs);
842 mask &= pcibios_irq_mask;
843
844 /* Work around broken HP Pavilion Notebooks which assign USB to
845 IRQ 9 even though it is actually wired to IRQ 11 */
846
847 if (broken_hp_bios_irq9 && pirq == 0x59 && dev->irq == 9) {
848 dev->irq = 11;
849 pci_write_config_byte(dev, PCI_INTERRUPT_LINE, 11);
850 r->set(pirq_router_dev, dev, pirq, 11);
851 }
852
853 /* same for Acer Travelmate 360, but with CB and irq 11 -> 10 */
854 if (acer_tm360_irqrouting && dev->irq == 11 && dev->vendor == PCI_VENDOR_ID_O2) {
855 pirq = 0x68;
856 mask = 0x400;
857 dev->irq = r->get(pirq_router_dev, dev, pirq);
858 pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
859 }
860
861 /*
862 * Find the best IRQ to assign: use the one
863 * reported by the device if possible.
864 */
865 newirq = dev->irq;
866 if (newirq && !((1 << newirq) & mask)) {
867 if ( pci_probe & PCI_USE_PIRQ_MASK) newirq = 0;
868 else printk("\n" KERN_WARNING
869 "PCI: IRQ %i for device %s doesn't match PIRQ mask "
870 "- try pci=usepirqmask\n" KERN_DEBUG, newirq,
871 pci_name(dev));
872 }
873 if (!newirq && assign) {
874 for (i = 0; i < 16; i++) {
875 if (!(mask & (1 << i)))
876 continue;
877 if (pirq_penalty[i] < pirq_penalty[newirq] && can_request_irq(i, IRQF_SHARED))
878 newirq = i;
879 }
880 }
881 DBG(" -> newirq=%d", newirq);
882
883 /* Check if it is hardcoded */
884 if ((pirq & 0xf0) == 0xf0) {
885 irq = pirq & 0xf;
886 DBG(" -> hardcoded IRQ %d\n", irq);
887 msg = "Hardcoded";
888 } else if ( r->get && (irq = r->get(pirq_router_dev, dev, pirq)) && \
889 ((!(pci_probe & PCI_USE_PIRQ_MASK)) || ((1 << irq) & mask)) ) {
890 DBG(" -> got IRQ %d\n", irq);
891 msg = "Found";
892 eisa_set_level_irq(irq);
893 } else if (newirq && r->set && (dev->class >> 8) != PCI_CLASS_DISPLAY_VGA) {
894 DBG(" -> assigning IRQ %d", newirq);
895 if (r->set(pirq_router_dev, dev, pirq, newirq)) {
896 eisa_set_level_irq(newirq);
897 DBG(" ... OK\n");
898 msg = "Assigned";
899 irq = newirq;
900 }
901 }
902
903 if (!irq) {
904 DBG(" ... failed\n");
905 if (newirq && mask == (1 << newirq)) {
906 msg = "Guessed";
907 irq = newirq;
908 } else
909 return 0;
910 }
911 printk(KERN_INFO "PCI: %s IRQ %d for device %s\n", msg, irq, pci_name(dev));
912
913 /* Update IRQ for all devices with the same pirq value */
914 while ((dev2 = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev2)) != NULL) {
915 pci_read_config_byte(dev2, PCI_INTERRUPT_PIN, &pin);
916 if (!pin)
917 continue;
918 pin--;
919 info = pirq_get_info(dev2);
920 if (!info)
921 continue;
922 if (info->irq[pin].link == pirq) {
923 /* We refuse to override the dev->irq information. Give a warning! */
924 if ( dev2->irq && dev2->irq != irq && \
925 (!(pci_probe & PCI_USE_PIRQ_MASK) || \
926 ((1 << dev2->irq) & mask)) ) {
927#ifndef CONFIG_PCI_MSI
928 printk(KERN_INFO "IRQ routing conflict for %s, have irq %d, want irq %d\n",
929 pci_name(dev2), dev2->irq, irq);
930#endif
931 continue;
932 }
933 dev2->irq = irq;
934 pirq_penalty[irq]++;
935 if (dev != dev2)
936 printk(KERN_INFO "PCI: Sharing IRQ %d with %s\n", irq, pci_name(dev2));
937 }
938 }
939 return 1;
940}
941
942static void __init pcibios_fixup_irqs(void)
943{
944 struct pci_dev *dev = NULL;
945 u8 pin;
946
947 DBG(KERN_DEBUG "PCI: IRQ fixup\n");
948 while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) {
949 /*
950 * If the BIOS has set an out of range IRQ number, just ignore it.
951 * Also keep track of which IRQ's are already in use.
952 */
953 if (dev->irq >= 16) {
954 DBG(KERN_DEBUG "%s: ignoring bogus IRQ %d\n", pci_name(dev), dev->irq);
955 dev->irq = 0;
956 }
957 /* If the IRQ is already assigned to a PCI device, ignore its ISA use penalty */
958 if (pirq_penalty[dev->irq] >= 100 && pirq_penalty[dev->irq] < 100000)
959 pirq_penalty[dev->irq] = 0;
960 pirq_penalty[dev->irq]++;
961 }
962
963 dev = NULL;
964 while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) {
965 pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin);
966#ifdef CONFIG_X86_IO_APIC
967 /*
968 * Recalculate IRQ numbers if we use the I/O APIC.
969 */
970 if (io_apic_assign_pci_irqs)
971 {
972 int irq;
973
974 if (pin) {
975 pin--; /* interrupt pins are numbered starting from 1 */
976 irq = IO_APIC_get_PCI_irq_vector(dev->bus->number, PCI_SLOT(dev->devfn), pin);
977 /*
978 * Busses behind bridges are typically not listed in the MP-table.
979 * In this case we have to look up the IRQ based on the parent bus,
980 * parent slot, and pin number. The SMP code detects such bridged
981 * busses itself so we should get into this branch reliably.
982 */
983 if (irq < 0 && dev->bus->parent) { /* go back to the bridge */
984 struct pci_dev * bridge = dev->bus->self;
985
986 pin = (pin + PCI_SLOT(dev->devfn)) % 4;
987 irq = IO_APIC_get_PCI_irq_vector(bridge->bus->number,
988 PCI_SLOT(bridge->devfn), pin);
989 if (irq >= 0)
990 printk(KERN_WARNING "PCI: using PPB %s[%c] to get irq %d\n",
991 pci_name(bridge), 'A' + pin, irq);
992 }
993 if (irq >= 0) {
994 printk(KERN_INFO "PCI->APIC IRQ transform: %s[%c] -> IRQ %d\n",
995 pci_name(dev), 'A' + pin, irq);
996 dev->irq = irq;
997 }
998 }
999 }
1000#endif
1001 /*
1002 * Still no IRQ? Try to lookup one...
1003 */
1004 if (pin && !dev->irq)
1005 pcibios_lookup_irq(dev, 0);
1006 }
1007}
1008
1009/*
1010 * Work around broken HP Pavilion Notebooks which assign USB to
1011 * IRQ 9 even though it is actually wired to IRQ 11
1012 */
1013static int __init fix_broken_hp_bios_irq9(struct dmi_system_id *d)
1014{
1015 if (!broken_hp_bios_irq9) {
1016 broken_hp_bios_irq9 = 1;
1017 printk(KERN_INFO "%s detected - fixing broken IRQ routing\n", d->ident);
1018 }
1019 return 0;
1020}
1021
1022/*
1023 * Work around broken Acer TravelMate 360 Notebooks which assign
1024 * Cardbus to IRQ 11 even though it is actually wired to IRQ 10
1025 */
1026static int __init fix_acer_tm360_irqrouting(struct dmi_system_id *d)
1027{
1028 if (!acer_tm360_irqrouting) {
1029 acer_tm360_irqrouting = 1;
1030 printk(KERN_INFO "%s detected - fixing broken IRQ routing\n", d->ident);
1031 }
1032 return 0;
1033}
1034
1035static struct dmi_system_id __initdata pciirq_dmi_table[] = {
1036 {
1037 .callback = fix_broken_hp_bios_irq9,
1038 .ident = "HP Pavilion N5400 Series Laptop",
1039 .matches = {
1040 DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
1041 DMI_MATCH(DMI_BIOS_VERSION, "GE.M1.03"),
1042 DMI_MATCH(DMI_PRODUCT_VERSION, "HP Pavilion Notebook Model GE"),
1043 DMI_MATCH(DMI_BOARD_VERSION, "OmniBook N32N-736"),
1044 },
1045 },
1046 {
1047 .callback = fix_acer_tm360_irqrouting,
1048 .ident = "Acer TravelMate 36x Laptop",
1049 .matches = {
1050 DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
1051 DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 360"),
1052 },
1053 },
1054 { }
1055};
1056
1057static int __init pcibios_irq_init(void)
1058{
1059 DBG(KERN_DEBUG "PCI: IRQ init\n");
1060
1061 if (pcibios_enable_irq || raw_pci_ops == NULL)
1062 return 0;
1063
1064 dmi_check_system(pciirq_dmi_table);
1065
1066 pirq_table = pirq_find_routing_table();
1067
1068#ifdef CONFIG_PCI_BIOS
1069 if (!pirq_table && (pci_probe & PCI_BIOS_IRQ_SCAN))
1070 pirq_table = pcibios_get_irq_routing_table();
1071#endif
1072 if (pirq_table) {
1073 pirq_peer_trick();
1074 pirq_find_router(&pirq_router);
1075 if (pirq_table->exclusive_irqs) {
1076 int i;
1077 for (i=0; i<16; i++)
1078 if (!(pirq_table->exclusive_irqs & (1 << i)))
1079 pirq_penalty[i] += 100;
1080 }
1081 /* If we're using the I/O APIC, avoid using the PCI IRQ routing table */
1082 if (io_apic_assign_pci_irqs)
1083 pirq_table = NULL;
1084 }
1085
1086 pcibios_enable_irq = pirq_enable_irq;
1087
1088 pcibios_fixup_irqs();
1089 return 0;
1090}
1091
1092subsys_initcall(pcibios_irq_init);
1093
1094
1095static void pirq_penalize_isa_irq(int irq, int active)
1096{
1097 /*
1098 * If any ISAPnP device reports an IRQ in its list of possible
1099 * IRQ's, we try to avoid assigning it to PCI devices.
1100 */
1101 if (irq < 16) {
1102 if (active)
1103 pirq_penalty[irq] += 1000;
1104 else
1105 pirq_penalty[irq] += 100;
1106 }
1107}
1108
1109void pcibios_penalize_isa_irq(int irq, int active)
1110{
1111#ifdef CONFIG_ACPI
1112 if (!acpi_noirq)
1113 acpi_penalize_isa_irq(irq, active);
1114 else
1115#endif
1116 pirq_penalize_isa_irq(irq, active);
1117}
1118
1119static int pirq_enable_irq(struct pci_dev *dev)
1120{
1121 u8 pin;
1122 struct pci_dev *temp_dev;
1123
1124 pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin);
1125 if (pin && !pcibios_lookup_irq(dev, 1) && !dev->irq) {
1126 char *msg = "";
1127
1128 pin--; /* interrupt pins are numbered starting from 1 */
1129
1130 if (io_apic_assign_pci_irqs) {
1131 int irq;
1132
1133 irq = IO_APIC_get_PCI_irq_vector(dev->bus->number, PCI_SLOT(dev->devfn), pin);
1134 /*
1135 * Busses behind bridges are typically not listed in the MP-table.
1136 * In this case we have to look up the IRQ based on the parent bus,
1137 * parent slot, and pin number. The SMP code detects such bridged
1138 * busses itself so we should get into this branch reliably.
1139 */
1140 temp_dev = dev;
1141 while (irq < 0 && dev->bus->parent) { /* go back to the bridge */
1142 struct pci_dev * bridge = dev->bus->self;
1143
1144 pin = (pin + PCI_SLOT(dev->devfn)) % 4;
1145 irq = IO_APIC_get_PCI_irq_vector(bridge->bus->number,
1146 PCI_SLOT(bridge->devfn), pin);
1147 if (irq >= 0)
1148 printk(KERN_WARNING "PCI: using PPB %s[%c] to get irq %d\n",
1149 pci_name(bridge), 'A' + pin, irq);
1150 dev = bridge;
1151 }
1152 dev = temp_dev;
1153 if (irq >= 0) {
1154 printk(KERN_INFO "PCI->APIC IRQ transform: %s[%c] -> IRQ %d\n",
1155 pci_name(dev), 'A' + pin, irq);
1156 dev->irq = irq;
1157 return 0;
1158 } else
1159 msg = " Probably buggy MP table.";
1160 } else if (pci_probe & PCI_BIOS_IRQ_SCAN)
1161 msg = "";
1162 else
1163 msg = " Please try using pci=biosirq.";
1164
1165 /* With IDE legacy devices the IRQ lookup failure is not a problem.. */
1166 if (dev->class >> 8 == PCI_CLASS_STORAGE_IDE && !(dev->class & 0x5))
1167 return 0;
1168
1169 printk(KERN_WARNING "PCI: No IRQ known for interrupt pin %c of device %s.%s\n",
1170 'A' + pin, pci_name(dev), msg);
1171 }
1172 return 0;
1173}
diff --git a/arch/i386/pci/legacy.c b/arch/i386/pci/legacy.c
deleted file mode 100644
index 5565d7016b75..000000000000
--- a/arch/i386/pci/legacy.c
+++ /dev/null
@@ -1,56 +0,0 @@
1/*
2 * legacy.c - traditional, old school PCI bus probing
3 */
4#include <linux/init.h>
5#include <linux/pci.h>
6#include "pci.h"
7
8/*
9 * Discover remaining PCI buses in case there are peer host bridges.
10 * We use the number of last PCI bus provided by the PCI BIOS.
11 */
12static void __devinit pcibios_fixup_peer_bridges(void)
13{
14 int n, devfn;
15
16 if (pcibios_last_bus <= 0 || pcibios_last_bus >= 0xff)
17 return;
18 DBG("PCI: Peer bridge fixup\n");
19
20 for (n=0; n <= pcibios_last_bus; n++) {
21 u32 l;
22 if (pci_find_bus(0, n))
23 continue;
24 for (devfn = 0; devfn < 256; devfn += 8) {
25 if (!raw_pci_ops->read(0, n, devfn, PCI_VENDOR_ID, 2, &l) &&
26 l != 0x0000 && l != 0xffff) {
27 DBG("Found device at %02x:%02x [%04x]\n", n, devfn, l);
28 printk(KERN_INFO "PCI: Discovered peer bus %02x\n", n);
29 pci_scan_bus_with_sysdata(n);
30 break;
31 }
32 }
33 }
34}
35
36static int __init pci_legacy_init(void)
37{
38 if (!raw_pci_ops) {
39 printk("PCI: System does not support PCI\n");
40 return 0;
41 }
42
43 if (pcibios_scanned++)
44 return 0;
45
46 printk("PCI: Probing PCI hardware\n");
47 pci_root_bus = pcibios_scan_root(0);
48 if (pci_root_bus)
49 pci_bus_add_devices(pci_root_bus);
50
51 pcibios_fixup_peer_bridges();
52
53 return 0;
54}
55
56subsys_initcall(pci_legacy_init);
diff --git a/arch/i386/pci/mmconfig-shared.c b/arch/i386/pci/mmconfig-shared.c
deleted file mode 100644
index 4df637e34f81..000000000000
--- a/arch/i386/pci/mmconfig-shared.c
+++ /dev/null
@@ -1,315 +0,0 @@
1/*
2 * mmconfig-shared.c - Low-level direct PCI config space access via
3 * MMCONFIG - common code between i386 and x86-64.
4 *
5 * This code does:
6 * - known chipset handling
7 * - ACPI decoding and validation
8 *
9 * Per-architecture code takes care of the mappings and accesses
10 * themselves.
11 */
12
13#include <linux/pci.h>
14#include <linux/init.h>
15#include <linux/acpi.h>
16#include <linux/bitmap.h>
17#include <asm/e820.h>
18
19#include "pci.h"
20
21/* aperture is up to 256MB but BIOS may reserve less */
22#define MMCONFIG_APER_MIN (2 * 1024*1024)
23#define MMCONFIG_APER_MAX (256 * 1024*1024)
24
25DECLARE_BITMAP(pci_mmcfg_fallback_slots, 32*PCI_MMCFG_MAX_CHECK_BUS);
26
27/* Indicate if the mmcfg resources have been placed into the resource table. */
28static int __initdata pci_mmcfg_resources_inserted;
29
30/* K8 systems have some devices (typically in the builtin northbridge)
31 that are only accessible using type1
32 Normally this can be expressed in the MCFG by not listing them
33 and assigning suitable _SEGs, but this isn't implemented in some BIOS.
34 Instead try to discover all devices on bus 0 that are unreachable using MM
35 and fallback for them. */
36static void __init unreachable_devices(void)
37{
38 int i, bus;
39 /* Use the max bus number from ACPI here? */
40 for (bus = 0; bus < PCI_MMCFG_MAX_CHECK_BUS; bus++) {
41 for (i = 0; i < 32; i++) {
42 unsigned int devfn = PCI_DEVFN(i, 0);
43 u32 val1, val2;
44
45 pci_conf1_read(0, bus, devfn, 0, 4, &val1);
46 if (val1 == 0xffffffff)
47 continue;
48
49 if (pci_mmcfg_arch_reachable(0, bus, devfn)) {
50 raw_pci_ops->read(0, bus, devfn, 0, 4, &val2);
51 if (val1 == val2)
52 continue;
53 }
54 set_bit(i + 32 * bus, pci_mmcfg_fallback_slots);
55 printk(KERN_NOTICE "PCI: No mmconfig possible on device"
56 " %02x:%02x\n", bus, i);
57 }
58 }
59}
60
61static const char __init *pci_mmcfg_e7520(void)
62{
63 u32 win;
64 pci_conf1_read(0, 0, PCI_DEVFN(0,0), 0xce, 2, &win);
65
66 win = win & 0xf000;
67 if(win == 0x0000 || win == 0xf000)
68 pci_mmcfg_config_num = 0;
69 else {
70 pci_mmcfg_config_num = 1;
71 pci_mmcfg_config = kzalloc(sizeof(pci_mmcfg_config[0]), GFP_KERNEL);
72 if (!pci_mmcfg_config)
73 return NULL;
74 pci_mmcfg_config[0].address = win << 16;
75 pci_mmcfg_config[0].pci_segment = 0;
76 pci_mmcfg_config[0].start_bus_number = 0;
77 pci_mmcfg_config[0].end_bus_number = 255;
78 }
79
80 return "Intel Corporation E7520 Memory Controller Hub";
81}
82
83static const char __init *pci_mmcfg_intel_945(void)
84{
85 u32 pciexbar, mask = 0, len = 0;
86
87 pci_mmcfg_config_num = 1;
88
89 pci_conf1_read(0, 0, PCI_DEVFN(0,0), 0x48, 4, &pciexbar);
90
91 /* Enable bit */
92 if (!(pciexbar & 1))
93 pci_mmcfg_config_num = 0;
94
95 /* Size bits */
96 switch ((pciexbar >> 1) & 3) {
97 case 0:
98 mask = 0xf0000000U;
99 len = 0x10000000U;
100 break;
101 case 1:
102 mask = 0xf8000000U;
103 len = 0x08000000U;
104 break;
105 case 2:
106 mask = 0xfc000000U;
107 len = 0x04000000U;
108 break;
109 default:
110 pci_mmcfg_config_num = 0;
111 }
112
113 /* Errata #2, things break when not aligned on a 256Mb boundary */
114 /* Can only happen in 64M/128M mode */
115
116 if ((pciexbar & mask) & 0x0fffffffU)
117 pci_mmcfg_config_num = 0;
118
119 /* Don't hit the APIC registers and their friends */
120 if ((pciexbar & mask) >= 0xf0000000U)
121 pci_mmcfg_config_num = 0;
122
123 if (pci_mmcfg_config_num) {
124 pci_mmcfg_config = kzalloc(sizeof(pci_mmcfg_config[0]), GFP_KERNEL);
125 if (!pci_mmcfg_config)
126 return NULL;
127 pci_mmcfg_config[0].address = pciexbar & mask;
128 pci_mmcfg_config[0].pci_segment = 0;
129 pci_mmcfg_config[0].start_bus_number = 0;
130 pci_mmcfg_config[0].end_bus_number = (len >> 20) - 1;
131 }
132
133 return "Intel Corporation 945G/GZ/P/PL Express Memory Controller Hub";
134}
135
136struct pci_mmcfg_hostbridge_probe {
137 u32 vendor;
138 u32 device;
139 const char *(*probe)(void);
140};
141
142static struct pci_mmcfg_hostbridge_probe pci_mmcfg_probes[] __initdata = {
143 { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7520_MCH, pci_mmcfg_e7520 },
144 { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82945G_HB, pci_mmcfg_intel_945 },
145};
146
147static int __init pci_mmcfg_check_hostbridge(void)
148{
149 u32 l;
150 u16 vendor, device;
151 int i;
152 const char *name;
153
154 pci_conf1_read(0, 0, PCI_DEVFN(0,0), 0, 4, &l);
155 vendor = l & 0xffff;
156 device = (l >> 16) & 0xffff;
157
158 pci_mmcfg_config_num = 0;
159 pci_mmcfg_config = NULL;
160 name = NULL;
161
162 for (i = 0; !name && i < ARRAY_SIZE(pci_mmcfg_probes); i++) {
163 if (pci_mmcfg_probes[i].vendor == vendor &&
164 pci_mmcfg_probes[i].device == device)
165 name = pci_mmcfg_probes[i].probe();
166 }
167
168 if (name) {
169 printk(KERN_INFO "PCI: Found %s %s MMCONFIG support.\n",
170 name, pci_mmcfg_config_num ? "with" : "without");
171 }
172
173 return name != NULL;
174}
175
176static void __init pci_mmcfg_insert_resources(unsigned long resource_flags)
177{
178#define PCI_MMCFG_RESOURCE_NAME_LEN 19
179 int i;
180 struct resource *res;
181 char *names;
182 unsigned num_buses;
183
184 res = kcalloc(PCI_MMCFG_RESOURCE_NAME_LEN + sizeof(*res),
185 pci_mmcfg_config_num, GFP_KERNEL);
186 if (!res) {
187 printk(KERN_ERR "PCI: Unable to allocate MMCONFIG resources\n");
188 return;
189 }
190
191 names = (void *)&res[pci_mmcfg_config_num];
192 for (i = 0; i < pci_mmcfg_config_num; i++, res++) {
193 struct acpi_mcfg_allocation *cfg = &pci_mmcfg_config[i];
194 num_buses = cfg->end_bus_number - cfg->start_bus_number + 1;
195 res->name = names;
196 snprintf(names, PCI_MMCFG_RESOURCE_NAME_LEN, "PCI MMCONFIG %u",
197 cfg->pci_segment);
198 res->start = cfg->address;
199 res->end = res->start + (num_buses << 20) - 1;
200 res->flags = IORESOURCE_MEM | resource_flags;
201 insert_resource(&iomem_resource, res);
202 names += PCI_MMCFG_RESOURCE_NAME_LEN;
203 }
204
205 /* Mark that the resources have been inserted. */
206 pci_mmcfg_resources_inserted = 1;
207}
208
209static void __init pci_mmcfg_reject_broken(int type)
210{
211 typeof(pci_mmcfg_config[0]) *cfg;
212
213 if ((pci_mmcfg_config_num == 0) ||
214 (pci_mmcfg_config == NULL) ||
215 (pci_mmcfg_config[0].address == 0))
216 return;
217
218 cfg = &pci_mmcfg_config[0];
219
220 /*
221 * Handle more broken MCFG tables on Asus etc.
222 * They only contain a single entry for bus 0-0.
223 */
224 if (pci_mmcfg_config_num == 1 &&
225 cfg->pci_segment == 0 &&
226 (cfg->start_bus_number | cfg->end_bus_number) == 0) {
227 printk(KERN_ERR "PCI: start and end of bus number is 0. "
228 "Rejected as broken MCFG.\n");
229 goto reject;
230 }
231
232 /*
233 * Only do this check when type 1 works. If it doesn't work
234 * assume we run on a Mac and always use MCFG
235 */
236 if (type == 1 && !e820_all_mapped(cfg->address,
237 cfg->address + MMCONFIG_APER_MIN,
238 E820_RESERVED)) {
239 printk(KERN_ERR "PCI: BIOS Bug: MCFG area at %Lx is not"
240 " E820-reserved\n", cfg->address);
241 goto reject;
242 }
243 return;
244
245reject:
246 printk(KERN_ERR "PCI: Not using MMCONFIG.\n");
247 kfree(pci_mmcfg_config);
248 pci_mmcfg_config = NULL;
249 pci_mmcfg_config_num = 0;
250}
251
252void __init pci_mmcfg_init(int type)
253{
254 int known_bridge = 0;
255
256 if ((pci_probe & PCI_PROBE_MMCONF) == 0)
257 return;
258
259 if (type == 1 && pci_mmcfg_check_hostbridge())
260 known_bridge = 1;
261
262 if (!known_bridge) {
263 acpi_table_parse(ACPI_SIG_MCFG, acpi_parse_mcfg);
264 pci_mmcfg_reject_broken(type);
265 }
266
267 if ((pci_mmcfg_config_num == 0) ||
268 (pci_mmcfg_config == NULL) ||
269 (pci_mmcfg_config[0].address == 0))
270 return;
271
272 if (pci_mmcfg_arch_init()) {
273 if (type == 1)
274 unreachable_devices();
275 if (known_bridge)
276 pci_mmcfg_insert_resources(IORESOURCE_BUSY);
277 pci_probe = (pci_probe & ~PCI_PROBE_MASK) | PCI_PROBE_MMCONF;
278 } else {
279 /*
280 * Signal not to attempt to insert mmcfg resources because
281 * the architecture mmcfg setup could not initialize.
282 */
283 pci_mmcfg_resources_inserted = 1;
284 }
285}
286
287static int __init pci_mmcfg_late_insert_resources(void)
288{
289 /*
290 * If resources are already inserted or we are not using MMCONFIG,
291 * don't insert the resources.
292 */
293 if ((pci_mmcfg_resources_inserted == 1) ||
294 (pci_probe & PCI_PROBE_MMCONF) == 0 ||
295 (pci_mmcfg_config_num == 0) ||
296 (pci_mmcfg_config == NULL) ||
297 (pci_mmcfg_config[0].address == 0))
298 return 1;
299
300 /*
301 * Attempt to insert the mmcfg resources but not with the busy flag
302 * marked so it won't cause request errors when __request_region is
303 * called.
304 */
305 pci_mmcfg_insert_resources(0);
306
307 return 0;
308}
309
310/*
311 * Perform MMCONFIG resource insertion after PCI initialization to allow for
312 * misprogrammed MCFG tables that state larger sizes but actually conflict
313 * with other system resources.
314 */
315late_initcall(pci_mmcfg_late_insert_resources);
diff --git a/arch/i386/pci/mmconfig_32.c b/arch/i386/pci/mmconfig_32.c
deleted file mode 100644
index 1bf5816d34c8..000000000000
--- a/arch/i386/pci/mmconfig_32.c
+++ /dev/null
@@ -1,148 +0,0 @@
1/*
2 * Copyright (C) 2004 Matthew Wilcox <matthew@wil.cx>
3 * Copyright (C) 2004 Intel Corp.
4 *
5 * This code is released under the GNU General Public License version 2.
6 */
7
8/*
9 * mmconfig.c - Low-level direct PCI config space access via MMCONFIG
10 */
11
12#include <linux/pci.h>
13#include <linux/init.h>
14#include <linux/acpi.h>
15#include <asm/e820.h>
16#include "pci.h"
17
18/* Assume systems with more busses have correct MCFG */
19#define mmcfg_virt_addr ((void __iomem *) fix_to_virt(FIX_PCIE_MCFG))
20
21/* The base address of the last MMCONFIG device accessed */
22static u32 mmcfg_last_accessed_device;
23static int mmcfg_last_accessed_cpu;
24
25/*
26 * Functions for accessing PCI configuration space with MMCONFIG accesses
27 */
28static u32 get_base_addr(unsigned int seg, int bus, unsigned devfn)
29{
30 struct acpi_mcfg_allocation *cfg;
31 int cfg_num;
32
33 if (seg == 0 && bus < PCI_MMCFG_MAX_CHECK_BUS &&
34 test_bit(PCI_SLOT(devfn) + 32*bus, pci_mmcfg_fallback_slots))
35 return 0;
36
37 for (cfg_num = 0; cfg_num < pci_mmcfg_config_num; cfg_num++) {
38 cfg = &pci_mmcfg_config[cfg_num];
39 if (cfg->pci_segment == seg &&
40 (cfg->start_bus_number <= bus) &&
41 (cfg->end_bus_number >= bus))
42 return cfg->address;
43 }
44
45 /* Fall back to type 0 */
46 return 0;
47}
48
49/*
50 * This is always called under pci_config_lock
51 */
52static void pci_exp_set_dev_base(unsigned int base, int bus, int devfn)
53{
54 u32 dev_base = base | (bus << 20) | (devfn << 12);
55 int cpu = smp_processor_id();
56 if (dev_base != mmcfg_last_accessed_device ||
57 cpu != mmcfg_last_accessed_cpu) {
58 mmcfg_last_accessed_device = dev_base;
59 mmcfg_last_accessed_cpu = cpu;
60 set_fixmap_nocache(FIX_PCIE_MCFG, dev_base);
61 }
62}
63
64static int pci_mmcfg_read(unsigned int seg, unsigned int bus,
65 unsigned int devfn, int reg, int len, u32 *value)
66{
67 unsigned long flags;
68 u32 base;
69
70 if ((bus > 255) || (devfn > 255) || (reg > 4095)) {
71 *value = -1;
72 return -EINVAL;
73 }
74
75 base = get_base_addr(seg, bus, devfn);
76 if (!base)
77 return pci_conf1_read(seg,bus,devfn,reg,len,value);
78
79 spin_lock_irqsave(&pci_config_lock, flags);
80
81 pci_exp_set_dev_base(base, bus, devfn);
82
83 switch (len) {
84 case 1:
85 *value = mmio_config_readb(mmcfg_virt_addr + reg);
86 break;
87 case 2:
88 *value = mmio_config_readw(mmcfg_virt_addr + reg);
89 break;
90 case 4:
91 *value = mmio_config_readl(mmcfg_virt_addr + reg);
92 break;
93 }
94 spin_unlock_irqrestore(&pci_config_lock, flags);
95
96 return 0;
97}
98
99static int pci_mmcfg_write(unsigned int seg, unsigned int bus,
100 unsigned int devfn, int reg, int len, u32 value)
101{
102 unsigned long flags;
103 u32 base;
104
105 if ((bus > 255) || (devfn > 255) || (reg > 4095))
106 return -EINVAL;
107
108 base = get_base_addr(seg, bus, devfn);
109 if (!base)
110 return pci_conf1_write(seg,bus,devfn,reg,len,value);
111
112 spin_lock_irqsave(&pci_config_lock, flags);
113
114 pci_exp_set_dev_base(base, bus, devfn);
115
116 switch (len) {
117 case 1:
118 mmio_config_writeb(mmcfg_virt_addr + reg, value);
119 break;
120 case 2:
121 mmio_config_writew(mmcfg_virt_addr + reg, value);
122 break;
123 case 4:
124 mmio_config_writel(mmcfg_virt_addr + reg, value);
125 break;
126 }
127 spin_unlock_irqrestore(&pci_config_lock, flags);
128
129 return 0;
130}
131
132static struct pci_raw_ops pci_mmcfg = {
133 .read = pci_mmcfg_read,
134 .write = pci_mmcfg_write,
135};
136
137int __init pci_mmcfg_arch_reachable(unsigned int seg, unsigned int bus,
138 unsigned int devfn)
139{
140 return get_base_addr(seg, bus, devfn) != 0;
141}
142
143int __init pci_mmcfg_arch_init(void)
144{
145 printk(KERN_INFO "PCI: Using MMCONFIG\n");
146 raw_pci_ops = &pci_mmcfg;
147 return 1;
148}
diff --git a/arch/i386/pci/numa.c b/arch/i386/pci/numa.c
deleted file mode 100644
index f5f165f69e0c..000000000000
--- a/arch/i386/pci/numa.c
+++ /dev/null
@@ -1,135 +0,0 @@
1/*
2 * numa.c - Low-level PCI access for NUMA-Q machines
3 */
4
5#include <linux/pci.h>
6#include <linux/init.h>
7#include <linux/nodemask.h>
8#include "pci.h"
9
10#define BUS2QUAD(global) (mp_bus_id_to_node[global])
11#define BUS2LOCAL(global) (mp_bus_id_to_local[global])
12#define QUADLOCAL2BUS(quad,local) (quad_local_to_mp_bus_id[quad][local])
13
14#define PCI_CONF1_MQ_ADDRESS(bus, devfn, reg) \
15 (0x80000000 | (BUS2LOCAL(bus) << 16) | (devfn << 8) | (reg & ~3))
16
17static int pci_conf1_mq_read(unsigned int seg, unsigned int bus,
18 unsigned int devfn, int reg, int len, u32 *value)
19{
20 unsigned long flags;
21
22 if (!value || (bus >= MAX_MP_BUSSES) || (devfn > 255) || (reg > 255))
23 return -EINVAL;
24
25 spin_lock_irqsave(&pci_config_lock, flags);
26
27 outl_quad(PCI_CONF1_MQ_ADDRESS(bus, devfn, reg), 0xCF8, BUS2QUAD(bus));
28
29 switch (len) {
30 case 1:
31 *value = inb_quad(0xCFC + (reg & 3), BUS2QUAD(bus));
32 break;
33 case 2:
34 *value = inw_quad(0xCFC + (reg & 2), BUS2QUAD(bus));
35 break;
36 case 4:
37 *value = inl_quad(0xCFC, BUS2QUAD(bus));
38 break;
39 }
40
41 spin_unlock_irqrestore(&pci_config_lock, flags);
42
43 return 0;
44}
45
46static int pci_conf1_mq_write(unsigned int seg, unsigned int bus,
47 unsigned int devfn, int reg, int len, u32 value)
48{
49 unsigned long flags;
50
51 if ((bus >= MAX_MP_BUSSES) || (devfn > 255) || (reg > 255))
52 return -EINVAL;
53
54 spin_lock_irqsave(&pci_config_lock, flags);
55
56 outl_quad(PCI_CONF1_MQ_ADDRESS(bus, devfn, reg), 0xCF8, BUS2QUAD(bus));
57
58 switch (len) {
59 case 1:
60 outb_quad((u8)value, 0xCFC + (reg & 3), BUS2QUAD(bus));
61 break;
62 case 2:
63 outw_quad((u16)value, 0xCFC + (reg & 2), BUS2QUAD(bus));
64 break;
65 case 4:
66 outl_quad((u32)value, 0xCFC, BUS2QUAD(bus));
67 break;
68 }
69
70 spin_unlock_irqrestore(&pci_config_lock, flags);
71
72 return 0;
73}
74
75#undef PCI_CONF1_MQ_ADDRESS
76
77static struct pci_raw_ops pci_direct_conf1_mq = {
78 .read = pci_conf1_mq_read,
79 .write = pci_conf1_mq_write
80};
81
82
83static void __devinit pci_fixup_i450nx(struct pci_dev *d)
84{
85 /*
86 * i450NX -- Find and scan all secondary buses on all PXB's.
87 */
88 int pxb, reg;
89 u8 busno, suba, subb;
90 int quad = BUS2QUAD(d->bus->number);
91
92 printk("PCI: Searching for i450NX host bridges on %s\n", pci_name(d));
93 reg = 0xd0;
94 for(pxb=0; pxb<2; pxb++) {
95 pci_read_config_byte(d, reg++, &busno);
96 pci_read_config_byte(d, reg++, &suba);
97 pci_read_config_byte(d, reg++, &subb);
98 DBG("i450NX PXB %d: %02x/%02x/%02x\n", pxb, busno, suba, subb);
99 if (busno) {
100 /* Bus A */
101 pci_scan_bus_with_sysdata(QUADLOCAL2BUS(quad, busno));
102 }
103 if (suba < subb) {
104 /* Bus B */
105 pci_scan_bus_with_sysdata(QUADLOCAL2BUS(quad, suba+1));
106 }
107 }
108 pcibios_last_bus = -1;
109}
110DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82451NX, pci_fixup_i450nx);
111
112static int __init pci_numa_init(void)
113{
114 int quad;
115
116 raw_pci_ops = &pci_direct_conf1_mq;
117
118 if (pcibios_scanned++)
119 return 0;
120
121 pci_root_bus = pcibios_scan_root(0);
122 if (pci_root_bus)
123 pci_bus_add_devices(pci_root_bus);
124 if (num_online_nodes() > 1)
125 for_each_online_node(quad) {
126 if (quad == 0)
127 continue;
128 printk("Scanning PCI bus %d for quad %d\n",
129 QUADLOCAL2BUS(quad,0), quad);
130 pci_scan_bus_with_sysdata(QUADLOCAL2BUS(quad, 0));
131 }
132 return 0;
133}
134
135subsys_initcall(pci_numa_init);
diff --git a/arch/i386/pci/pcbios.c b/arch/i386/pci/pcbios.c
deleted file mode 100644
index 10ac8c316c46..000000000000
--- a/arch/i386/pci/pcbios.c
+++ /dev/null
@@ -1,492 +0,0 @@
1/*
2 * BIOS32 and PCI BIOS handling.
3 */
4
5#include <linux/pci.h>
6#include <linux/init.h>
7#include <linux/module.h>
8#include <linux/uaccess.h>
9#include "pci.h"
10#include "pci-functions.h"
11
12
13/* BIOS32 signature: "_32_" */
14#define BIOS32_SIGNATURE (('_' << 0) + ('3' << 8) + ('2' << 16) + ('_' << 24))
15
16/* PCI signature: "PCI " */
17#define PCI_SIGNATURE (('P' << 0) + ('C' << 8) + ('I' << 16) + (' ' << 24))
18
19/* PCI service signature: "$PCI" */
20#define PCI_SERVICE (('$' << 0) + ('P' << 8) + ('C' << 16) + ('I' << 24))
21
22/* PCI BIOS hardware mechanism flags */
23#define PCIBIOS_HW_TYPE1 0x01
24#define PCIBIOS_HW_TYPE2 0x02
25#define PCIBIOS_HW_TYPE1_SPEC 0x10
26#define PCIBIOS_HW_TYPE2_SPEC 0x20
27
28/*
29 * This is the standard structure used to identify the entry point
30 * to the BIOS32 Service Directory, as documented in
31 * Standard BIOS 32-bit Service Directory Proposal
32 * Revision 0.4 May 24, 1993
33 * Phoenix Technologies Ltd.
34 * Norwood, MA
35 * and the PCI BIOS specification.
36 */
37
38union bios32 {
39 struct {
40 unsigned long signature; /* _32_ */
41 unsigned long entry; /* 32 bit physical address */
42 unsigned char revision; /* Revision level, 0 */
43 unsigned char length; /* Length in paragraphs should be 01 */
44 unsigned char checksum; /* All bytes must add up to zero */
45 unsigned char reserved[5]; /* Must be zero */
46 } fields;
47 char chars[16];
48};
49
50/*
51 * Physical address of the service directory. I don't know if we're
52 * allowed to have more than one of these or not, so just in case
53 * we'll make pcibios_present() take a memory start parameter and store
54 * the array there.
55 */
56
57static struct {
58 unsigned long address;
59 unsigned short segment;
60} bios32_indirect = { 0, __KERNEL_CS };
61
62/*
63 * Returns the entry point for the given service, NULL on error
64 */
65
66static unsigned long bios32_service(unsigned long service)
67{
68 unsigned char return_code; /* %al */
69 unsigned long address; /* %ebx */
70 unsigned long length; /* %ecx */
71 unsigned long entry; /* %edx */
72 unsigned long flags;
73
74 local_irq_save(flags);
75 __asm__("lcall *(%%edi); cld"
76 : "=a" (return_code),
77 "=b" (address),
78 "=c" (length),
79 "=d" (entry)
80 : "0" (service),
81 "1" (0),
82 "D" (&bios32_indirect));
83 local_irq_restore(flags);
84
85 switch (return_code) {
86 case 0:
87 return address + entry;
88 case 0x80: /* Not present */
89 printk(KERN_WARNING "bios32_service(0x%lx): not present\n", service);
90 return 0;
91 default: /* Shouldn't happen */
92 printk(KERN_WARNING "bios32_service(0x%lx): returned 0x%x -- BIOS bug!\n",
93 service, return_code);
94 return 0;
95 }
96}
97
98static struct {
99 unsigned long address;
100 unsigned short segment;
101} pci_indirect = { 0, __KERNEL_CS };
102
103static int pci_bios_present;
104
105static int __devinit check_pcibios(void)
106{
107 u32 signature, eax, ebx, ecx;
108 u8 status, major_ver, minor_ver, hw_mech;
109 unsigned long flags, pcibios_entry;
110
111 if ((pcibios_entry = bios32_service(PCI_SERVICE))) {
112 pci_indirect.address = pcibios_entry + PAGE_OFFSET;
113
114 local_irq_save(flags);
115 __asm__(
116 "lcall *(%%edi); cld\n\t"
117 "jc 1f\n\t"
118 "xor %%ah, %%ah\n"
119 "1:"
120 : "=d" (signature),
121 "=a" (eax),
122 "=b" (ebx),
123 "=c" (ecx)
124 : "1" (PCIBIOS_PCI_BIOS_PRESENT),
125 "D" (&pci_indirect)
126 : "memory");
127 local_irq_restore(flags);
128
129 status = (eax >> 8) & 0xff;
130 hw_mech = eax & 0xff;
131 major_ver = (ebx >> 8) & 0xff;
132 minor_ver = ebx & 0xff;
133 if (pcibios_last_bus < 0)
134 pcibios_last_bus = ecx & 0xff;
135 DBG("PCI: BIOS probe returned s=%02x hw=%02x ver=%02x.%02x l=%02x\n",
136 status, hw_mech, major_ver, minor_ver, pcibios_last_bus);
137 if (status || signature != PCI_SIGNATURE) {
138 printk (KERN_ERR "PCI: BIOS BUG #%x[%08x] found\n",
139 status, signature);
140 return 0;
141 }
142 printk(KERN_INFO "PCI: PCI BIOS revision %x.%02x entry at 0x%lx, last bus=%d\n",
143 major_ver, minor_ver, pcibios_entry, pcibios_last_bus);
144#ifdef CONFIG_PCI_DIRECT
145 if (!(hw_mech & PCIBIOS_HW_TYPE1))
146 pci_probe &= ~PCI_PROBE_CONF1;
147 if (!(hw_mech & PCIBIOS_HW_TYPE2))
148 pci_probe &= ~PCI_PROBE_CONF2;
149#endif
150 return 1;
151 }
152 return 0;
153}
154
155static int __devinit pci_bios_find_device (unsigned short vendor, unsigned short device_id,
156 unsigned short index, unsigned char *bus, unsigned char *device_fn)
157{
158 unsigned short bx;
159 unsigned short ret;
160
161 __asm__("lcall *(%%edi); cld\n\t"
162 "jc 1f\n\t"
163 "xor %%ah, %%ah\n"
164 "1:"
165 : "=b" (bx),
166 "=a" (ret)
167 : "1" (PCIBIOS_FIND_PCI_DEVICE),
168 "c" (device_id),
169 "d" (vendor),
170 "S" ((int) index),
171 "D" (&pci_indirect));
172 *bus = (bx >> 8) & 0xff;
173 *device_fn = bx & 0xff;
174 return (int) (ret & 0xff00) >> 8;
175}
176
177static int pci_bios_read(unsigned int seg, unsigned int bus,
178 unsigned int devfn, int reg, int len, u32 *value)
179{
180 unsigned long result = 0;
181 unsigned long flags;
182 unsigned long bx = (bus << 8) | devfn;
183
184 if (!value || (bus > 255) || (devfn > 255) || (reg > 255))
185 return -EINVAL;
186
187 spin_lock_irqsave(&pci_config_lock, flags);
188
189 switch (len) {
190 case 1:
191 __asm__("lcall *(%%esi); cld\n\t"
192 "jc 1f\n\t"
193 "xor %%ah, %%ah\n"
194 "1:"
195 : "=c" (*value),
196 "=a" (result)
197 : "1" (PCIBIOS_READ_CONFIG_BYTE),
198 "b" (bx),
199 "D" ((long)reg),
200 "S" (&pci_indirect));
201 break;
202 case 2:
203 __asm__("lcall *(%%esi); cld\n\t"
204 "jc 1f\n\t"
205 "xor %%ah, %%ah\n"
206 "1:"
207 : "=c" (*value),
208 "=a" (result)
209 : "1" (PCIBIOS_READ_CONFIG_WORD),
210 "b" (bx),
211 "D" ((long)reg),
212 "S" (&pci_indirect));
213 break;
214 case 4:
215 __asm__("lcall *(%%esi); cld\n\t"
216 "jc 1f\n\t"
217 "xor %%ah, %%ah\n"
218 "1:"
219 : "=c" (*value),
220 "=a" (result)
221 : "1" (PCIBIOS_READ_CONFIG_DWORD),
222 "b" (bx),
223 "D" ((long)reg),
224 "S" (&pci_indirect));
225 break;
226 }
227
228 spin_unlock_irqrestore(&pci_config_lock, flags);
229
230 return (int)((result & 0xff00) >> 8);
231}
232
233static int pci_bios_write(unsigned int seg, unsigned int bus,
234 unsigned int devfn, int reg, int len, u32 value)
235{
236 unsigned long result = 0;
237 unsigned long flags;
238 unsigned long bx = (bus << 8) | devfn;
239
240 if ((bus > 255) || (devfn > 255) || (reg > 255))
241 return -EINVAL;
242
243 spin_lock_irqsave(&pci_config_lock, flags);
244
245 switch (len) {
246 case 1:
247 __asm__("lcall *(%%esi); cld\n\t"
248 "jc 1f\n\t"
249 "xor %%ah, %%ah\n"
250 "1:"
251 : "=a" (result)
252 : "0" (PCIBIOS_WRITE_CONFIG_BYTE),
253 "c" (value),
254 "b" (bx),
255 "D" ((long)reg),
256 "S" (&pci_indirect));
257 break;
258 case 2:
259 __asm__("lcall *(%%esi); cld\n\t"
260 "jc 1f\n\t"
261 "xor %%ah, %%ah\n"
262 "1:"
263 : "=a" (result)
264 : "0" (PCIBIOS_WRITE_CONFIG_WORD),
265 "c" (value),
266 "b" (bx),
267 "D" ((long)reg),
268 "S" (&pci_indirect));
269 break;
270 case 4:
271 __asm__("lcall *(%%esi); cld\n\t"
272 "jc 1f\n\t"
273 "xor %%ah, %%ah\n"
274 "1:"
275 : "=a" (result)
276 : "0" (PCIBIOS_WRITE_CONFIG_DWORD),
277 "c" (value),
278 "b" (bx),
279 "D" ((long)reg),
280 "S" (&pci_indirect));
281 break;
282 }
283
284 spin_unlock_irqrestore(&pci_config_lock, flags);
285
286 return (int)((result & 0xff00) >> 8);
287}
288
289
290/*
291 * Function table for BIOS32 access
292 */
293
294static struct pci_raw_ops pci_bios_access = {
295 .read = pci_bios_read,
296 .write = pci_bios_write
297};
298
299/*
300 * Try to find PCI BIOS.
301 */
302
303static struct pci_raw_ops * __devinit pci_find_bios(void)
304{
305 union bios32 *check;
306 unsigned char sum;
307 int i, length;
308
309 /*
310 * Follow the standard procedure for locating the BIOS32 Service
311 * directory by scanning the permissible address range from
312 * 0xe0000 through 0xfffff for a valid BIOS32 structure.
313 */
314
315 for (check = (union bios32 *) __va(0xe0000);
316 check <= (union bios32 *) __va(0xffff0);
317 ++check) {
318 long sig;
319 if (probe_kernel_address(&check->fields.signature, sig))
320 continue;
321
322 if (check->fields.signature != BIOS32_SIGNATURE)
323 continue;
324 length = check->fields.length * 16;
325 if (!length)
326 continue;
327 sum = 0;
328 for (i = 0; i < length ; ++i)
329 sum += check->chars[i];
330 if (sum != 0)
331 continue;
332 if (check->fields.revision != 0) {
333 printk("PCI: unsupported BIOS32 revision %d at 0x%p\n",
334 check->fields.revision, check);
335 continue;
336 }
337 DBG("PCI: BIOS32 Service Directory structure at 0x%p\n", check);
338 if (check->fields.entry >= 0x100000) {
339 printk("PCI: BIOS32 entry (0x%p) in high memory, "
340 "cannot use.\n", check);
341 return NULL;
342 } else {
343 unsigned long bios32_entry = check->fields.entry;
344 DBG("PCI: BIOS32 Service Directory entry at 0x%lx\n",
345 bios32_entry);
346 bios32_indirect.address = bios32_entry + PAGE_OFFSET;
347 if (check_pcibios())
348 return &pci_bios_access;
349 }
350 break; /* Hopefully more than one BIOS32 cannot happen... */
351 }
352
353 return NULL;
354}
355
356/*
357 * Sort the device list according to PCI BIOS. Nasty hack, but since some
358 * fool forgot to define the `correct' device order in the PCI BIOS specs
359 * and we want to be (possibly bug-to-bug ;-]) compatible with older kernels
360 * which used BIOS ordering, we are bound to do this...
361 */
362
363void __devinit pcibios_sort(void)
364{
365 LIST_HEAD(sorted_devices);
366 struct list_head *ln;
367 struct pci_dev *dev, *d;
368 int idx, found;
369 unsigned char bus, devfn;
370
371 DBG("PCI: Sorting device list...\n");
372 while (!list_empty(&pci_devices)) {
373 ln = pci_devices.next;
374 dev = pci_dev_g(ln);
375 idx = found = 0;
376 while (pci_bios_find_device(dev->vendor, dev->device, idx, &bus, &devfn) == PCIBIOS_SUCCESSFUL) {
377 idx++;
378 list_for_each(ln, &pci_devices) {
379 d = pci_dev_g(ln);
380 if (d->bus->number == bus && d->devfn == devfn) {
381 list_move_tail(&d->global_list, &sorted_devices);
382 if (d == dev)
383 found = 1;
384 break;
385 }
386 }
387 if (ln == &pci_devices) {
388 printk(KERN_WARNING "PCI: BIOS reporting unknown device %02x:%02x\n", bus, devfn);
389 /*
390 * We must not continue scanning as several buggy BIOSes
391 * return garbage after the last device. Grr.
392 */
393 break;
394 }
395 }
396 if (!found) {
397 printk(KERN_WARNING "PCI: Device %s not found by BIOS\n",
398 pci_name(dev));
399 list_move_tail(&dev->global_list, &sorted_devices);
400 }
401 }
402 list_splice(&sorted_devices, &pci_devices);
403}
404
405/*
406 * BIOS Functions for IRQ Routing
407 */
408
409struct irq_routing_options {
410 u16 size;
411 struct irq_info *table;
412 u16 segment;
413} __attribute__((packed));
414
415struct irq_routing_table * pcibios_get_irq_routing_table(void)
416{
417 struct irq_routing_options opt;
418 struct irq_routing_table *rt = NULL;
419 int ret, map;
420 unsigned long page;
421
422 if (!pci_bios_present)
423 return NULL;
424 page = __get_free_page(GFP_KERNEL);
425 if (!page)
426 return NULL;
427 opt.table = (struct irq_info *) page;
428 opt.size = PAGE_SIZE;
429 opt.segment = __KERNEL_DS;
430
431 DBG("PCI: Fetching IRQ routing table... ");
432 __asm__("push %%es\n\t"
433 "push %%ds\n\t"
434 "pop %%es\n\t"
435 "lcall *(%%esi); cld\n\t"
436 "pop %%es\n\t"
437 "jc 1f\n\t"
438 "xor %%ah, %%ah\n"
439 "1:"
440 : "=a" (ret),
441 "=b" (map),
442 "=m" (opt)
443 : "0" (PCIBIOS_GET_ROUTING_OPTIONS),
444 "1" (0),
445 "D" ((long) &opt),
446 "S" (&pci_indirect),
447 "m" (opt)
448 : "memory");
449 DBG("OK ret=%d, size=%d, map=%x\n", ret, opt.size, map);
450 if (ret & 0xff00)
451 printk(KERN_ERR "PCI: Error %02x when fetching IRQ routing table.\n", (ret >> 8) & 0xff);
452 else if (opt.size) {
453 rt = kmalloc(sizeof(struct irq_routing_table) + opt.size, GFP_KERNEL);
454 if (rt) {
455 memset(rt, 0, sizeof(struct irq_routing_table));
456 rt->size = opt.size + sizeof(struct irq_routing_table);
457 rt->exclusive_irqs = map;
458 memcpy(rt->slots, (void *) page, opt.size);
459 printk(KERN_INFO "PCI: Using BIOS Interrupt Routing Table\n");
460 }
461 }
462 free_page(page);
463 return rt;
464}
465EXPORT_SYMBOL(pcibios_get_irq_routing_table);
466
467int pcibios_set_irq_routing(struct pci_dev *dev, int pin, int irq)
468{
469 int ret;
470
471 __asm__("lcall *(%%esi); cld\n\t"
472 "jc 1f\n\t"
473 "xor %%ah, %%ah\n"
474 "1:"
475 : "=a" (ret)
476 : "0" (PCIBIOS_SET_PCI_HW_INT),
477 "b" ((dev->bus->number << 8) | dev->devfn),
478 "c" ((irq << 8) | (pin + 10)),
479 "S" (&pci_indirect));
480 return !(ret & 0xff00);
481}
482EXPORT_SYMBOL(pcibios_set_irq_routing);
483
484void __init pci_pcbios_init(void)
485{
486 if ((pci_probe & PCI_PROBE_BIOS)
487 && ((raw_pci_ops = pci_find_bios()))) {
488 pci_probe |= PCI_BIOS_SORT;
489 pci_bios_present = 1;
490 }
491}
492
diff --git a/arch/i386/pci/pci.h b/arch/i386/pci/pci.h
deleted file mode 100644
index 8c66f275756f..000000000000
--- a/arch/i386/pci/pci.h
+++ /dev/null
@@ -1,149 +0,0 @@
1/*
2 * Low-Level PCI Access for i386 machines.
3 *
4 * (c) 1999 Martin Mares <mj@ucw.cz>
5 */
6
7#undef DEBUG
8
9#ifdef DEBUG
10#define DBG(x...) printk(x)
11#else
12#define DBG(x...)
13#endif
14
15#define PCI_PROBE_BIOS 0x0001
16#define PCI_PROBE_CONF1 0x0002
17#define PCI_PROBE_CONF2 0x0004
18#define PCI_PROBE_MMCONF 0x0008
19#define PCI_PROBE_MASK 0x000f
20#define PCI_PROBE_NOEARLY 0x0010
21
22#define PCI_NO_SORT 0x0100
23#define PCI_BIOS_SORT 0x0200
24#define PCI_NO_CHECKS 0x0400
25#define PCI_USE_PIRQ_MASK 0x0800
26#define PCI_ASSIGN_ROMS 0x1000
27#define PCI_BIOS_IRQ_SCAN 0x2000
28#define PCI_ASSIGN_ALL_BUSSES 0x4000
29
30extern unsigned int pci_probe;
31extern unsigned long pirq_table_addr;
32
33enum pci_bf_sort_state {
34 pci_bf_sort_default,
35 pci_force_nobf,
36 pci_force_bf,
37 pci_dmi_bf,
38};
39
40/* pci-i386.c */
41
42extern unsigned int pcibios_max_latency;
43
44void pcibios_resource_survey(void);
45int pcibios_enable_resources(struct pci_dev *, int);
46
47/* pci-pc.c */
48
49extern int pcibios_last_bus;
50extern struct pci_bus *pci_root_bus;
51extern struct pci_ops pci_root_ops;
52
53/* pci-irq.c */
54
55struct irq_info {
56 u8 bus, devfn; /* Bus, device and function */
57 struct {
58 u8 link; /* IRQ line ID, chipset dependent, 0=not routed */
59 u16 bitmap; /* Available IRQs */
60 } __attribute__((packed)) irq[4];
61 u8 slot; /* Slot number, 0=onboard */
62 u8 rfu;
63} __attribute__((packed));
64
65struct irq_routing_table {
66 u32 signature; /* PIRQ_SIGNATURE should be here */
67 u16 version; /* PIRQ_VERSION */
68 u16 size; /* Table size in bytes */
69 u8 rtr_bus, rtr_devfn; /* Where the interrupt router lies */
70 u16 exclusive_irqs; /* IRQs devoted exclusively to PCI usage */
71 u16 rtr_vendor, rtr_device; /* Vendor and device ID of interrupt router */
72 u32 miniport_data; /* Crap */
73 u8 rfu[11];
74 u8 checksum; /* Modulo 256 checksum must give zero */
75 struct irq_info slots[0];
76} __attribute__((packed));
77
78extern unsigned int pcibios_irq_mask;
79
80extern int pcibios_scanned;
81extern spinlock_t pci_config_lock;
82
83extern int (*pcibios_enable_irq)(struct pci_dev *dev);
84extern void (*pcibios_disable_irq)(struct pci_dev *dev);
85
86extern int pci_conf1_write(unsigned int seg, unsigned int bus,
87 unsigned int devfn, int reg, int len, u32 value);
88extern int pci_conf1_read(unsigned int seg, unsigned int bus,
89 unsigned int devfn, int reg, int len, u32 *value);
90
91extern int pci_direct_probe(void);
92extern void pci_direct_init(int type);
93extern void pci_pcbios_init(void);
94extern void pci_mmcfg_init(int type);
95extern void pcibios_sort(void);
96
97/* pci-mmconfig.c */
98
99/* Verify the first 16 busses. We assume that systems with more busses
100 get MCFG right. */
101#define PCI_MMCFG_MAX_CHECK_BUS 16
102extern DECLARE_BITMAP(pci_mmcfg_fallback_slots, 32*PCI_MMCFG_MAX_CHECK_BUS);
103
104extern int __init pci_mmcfg_arch_reachable(unsigned int seg, unsigned int bus,
105 unsigned int devfn);
106extern int __init pci_mmcfg_arch_init(void);
107
108/*
109 * AMD Fam10h CPUs are buggy, and cannot access MMIO config space
110 * on their northbrige except through the * %eax register. As such, you MUST
111 * NOT use normal IOMEM accesses, you need to only use the magic mmio-config
112 * accessor functions.
113 * In fact just use pci_config_*, nothing else please.
114 */
115static inline unsigned char mmio_config_readb(void __iomem *pos)
116{
117 u8 val;
118 asm volatile("movb (%1),%%al" : "=a" (val) : "r" (pos));
119 return val;
120}
121
122static inline unsigned short mmio_config_readw(void __iomem *pos)
123{
124 u16 val;
125 asm volatile("movw (%1),%%ax" : "=a" (val) : "r" (pos));
126 return val;
127}
128
129static inline unsigned int mmio_config_readl(void __iomem *pos)
130{
131 u32 val;
132 asm volatile("movl (%1),%%eax" : "=a" (val) : "r" (pos));
133 return val;
134}
135
136static inline void mmio_config_writeb(void __iomem *pos, u8 val)
137{
138 asm volatile("movb %%al,(%1)" :: "a" (val), "r" (pos) : "memory");
139}
140
141static inline void mmio_config_writew(void __iomem *pos, u16 val)
142{
143 asm volatile("movw %%ax,(%1)" :: "a" (val), "r" (pos) : "memory");
144}
145
146static inline void mmio_config_writel(void __iomem *pos, u32 val)
147{
148 asm volatile("movl %%eax,(%1)" :: "a" (val), "r" (pos) : "memory");
149}
diff --git a/arch/i386/pci/visws.c b/arch/i386/pci/visws.c
deleted file mode 100644
index 8ecb1c722594..000000000000
--- a/arch/i386/pci/visws.c
+++ /dev/null
@@ -1,111 +0,0 @@
1/*
2 * Low-Level PCI Support for SGI Visual Workstation
3 *
4 * (c) 1999--2000 Martin Mares <mj@ucw.cz>
5 */
6
7#include <linux/kernel.h>
8#include <linux/pci.h>
9#include <linux/init.h>
10
11#include "cobalt.h"
12#include "lithium.h"
13
14#include "pci.h"
15
16
17extern struct pci_raw_ops pci_direct_conf1;
18
19static int pci_visws_enable_irq(struct pci_dev *dev) { return 0; }
20static void pci_visws_disable_irq(struct pci_dev *dev) { }
21
22int (*pcibios_enable_irq)(struct pci_dev *dev) = &pci_visws_enable_irq;
23void (*pcibios_disable_irq)(struct pci_dev *dev) = &pci_visws_disable_irq;
24
25void __init pcibios_penalize_isa_irq(int irq, int active) {}
26
27
28unsigned int pci_bus0, pci_bus1;
29
30static inline u8 bridge_swizzle(u8 pin, u8 slot)
31{
32 return (((pin - 1) + slot) % 4) + 1;
33}
34
35static u8 __init visws_swizzle(struct pci_dev *dev, u8 *pinp)
36{
37 u8 pin = *pinp;
38
39 while (dev->bus->self) { /* Move up the chain of bridges. */
40 pin = bridge_swizzle(pin, PCI_SLOT(dev->devfn));
41 dev = dev->bus->self;
42 }
43 *pinp = pin;
44
45 return PCI_SLOT(dev->devfn);
46}
47
48static int __init visws_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
49{
50 int irq, bus = dev->bus->number;
51
52 pin--;
53
54 /* Nothing useful at PIIX4 pin 1 */
55 if (bus == pci_bus0 && slot == 4 && pin == 0)
56 return -1;
57
58 /* PIIX4 USB is on Bus 0, Slot 4, Line 3 */
59 if (bus == pci_bus0 && slot == 4 && pin == 3) {
60 irq = CO_IRQ(CO_APIC_PIIX4_USB);
61 goto out;
62 }
63
64 /* First pin spread down 1 APIC entry per slot */
65 if (pin == 0) {
66 irq = CO_IRQ((bus == pci_bus0 ? CO_APIC_PCIB_BASE0 :
67 CO_APIC_PCIA_BASE0) + slot);
68 goto out;
69 }
70
71 /* lines 1,2,3 from any slot is shared in this twirly pattern */
72 if (bus == pci_bus1) {
73 /* lines 1-3 from devices 0 1 rotate over 2 apic entries */
74 irq = CO_IRQ(CO_APIC_PCIA_BASE123 + ((slot + (pin - 1)) % 2));
75 } else { /* bus == pci_bus0 */
76 /* lines 1-3 from devices 0-3 rotate over 3 apic entries */
77 if (slot == 0)
78 slot = 3; /* same pattern */
79 irq = CO_IRQ(CO_APIC_PCIA_BASE123 + ((3 - slot) + (pin - 1) % 3));
80 }
81out:
82 printk(KERN_DEBUG "PCI: Bus %d Slot %d Line %d -> IRQ %d\n", bus, slot, pin, irq);
83 return irq;
84}
85
86void __init pcibios_update_irq(struct pci_dev *dev, int irq)
87{
88 pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq);
89}
90
91static int __init pcibios_init(void)
92{
93 /* The VISWS supports configuration access type 1 only */
94 pci_probe = (pci_probe | PCI_PROBE_CONF1) &
95 ~(PCI_PROBE_BIOS | PCI_PROBE_CONF2);
96
97 pci_bus0 = li_pcib_read16(LI_PCI_BUSNUM) & 0xff;
98 pci_bus1 = li_pcia_read16(LI_PCI_BUSNUM) & 0xff;
99
100 printk(KERN_INFO "PCI: Lithium bridge A bus: %u, "
101 "bridge B (PIIX4) bus: %u\n", pci_bus1, pci_bus0);
102
103 raw_pci_ops = &pci_direct_conf1;
104 pci_scan_bus_with_sysdata(pci_bus0);
105 pci_scan_bus_with_sysdata(pci_bus1);
106 pci_fixup_irqs(visws_swizzle, visws_map_irq);
107 pcibios_resource_survey();
108 return 0;
109}
110
111subsys_initcall(pcibios_init);
generated by cgit v1.2.2 (git 2.25.0) at 2024-10-03 09:25:45 -0400