[PATCH] i386: port ATI timer fix from x86_64 to i386 II

ATI chipsets tend to generate double timer interrupts for the local APIC
timer when both the 8254 and the IO-APIC timer pins are enabled.  This is
because they route it to both and the result is anded together and the CPU
ends up processing it twice.

This patch changes check_timer to disable the 8254 routing for interrupt 0.

I think it would be safe on all chipsets actually (i tested it on a couple
and it worked everywhere) and Windows seems to do it in a similar way, but
to be conservative this patch only enables this mode on ATI (and adds
options to enable/disable too)

Ported over from a similar x86-64 change.

I reused the ACPI earlyquirk infrastructure for the ATI bridge check, but
tweaked it a bit to work even without ACPI.

Inspired by a patch from Chuck Ebbert, but redone.

Cc: Chuck Ebbert <76306.1226@compuserve.com>
Cc: "Brown, Len" <len.brown@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

6 files changed, 32 insertions, 6 deletions

diff --git a/arch/i386/kernel/Makefile b/arch/i386/kernel/Makefile
index 53bb9a79e274..65656c033d70 100644
--- a/arch/i386/kernel/Makefile
+++ b/arch/i386/kernel/Makefile
@@ -11,7 +11,7 @@ obj-y	:= process.o semaphore.o signal.o entry.o traps.o irq.o \
 
 obj-y                           += cpu/
 obj-y                           += timers/
-obj-$(CONFIG_ACPI)              += acpi/
+obj-y                           += acpi/
 obj-$(CONFIG_X86_BIOS_REBOOT)   += reboot.o
 obj-$(CONFIG_MCA)               += mca.o
 obj-$(CONFIG_X86_MSR)           += msr.o
diff --git a/arch/i386/kernel/acpi/Makefile b/arch/i386/kernel/acpi/Makefile
index d51c7313cae8..7e9ac99354f4 100644
--- a/arch/i386/kernel/acpi/Makefile
+++ b/arch/i386/kernel/acpi/Makefile
@@ -1,4 +1,4 @@
-obj-y                           := boot.o
+obj-$(CONFIG_ACPI)              += boot.o
 obj-$(CONFIG_X86_IO_APIC)       += earlyquirk.o
 obj-$(CONFIG_ACPI_SLEEP)        += sleep.o wakeup.o
 
diff --git a/arch/i386/kernel/acpi/boot.c b/arch/i386/kernel/acpi/boot.c
index 79577f0ace98..f1a21945963d 100644
--- a/arch/i386/kernel/acpi/boot.c
+++ b/arch/i386/kernel/acpi/boot.c
@@ -1111,9 +1111,6 @@ int __init acpi_boot_table_init(void)
                 disable_acpi();
                 return error;
         }
-#ifdef __i386__
-        check_acpi_pci();
-#endif
 
         acpi_table_parse(ACPI_BOOT, acpi_parse_sbf);
 
diff --git a/arch/i386/kernel/acpi/earlyquirk.c b/arch/i386/kernel/acpi/earlyquirk.c
index f1b9d2a46dab..2e3b643a4dc4 100644
--- a/arch/i386/kernel/acpi/earlyquirk.c
+++ b/arch/i386/kernel/acpi/earlyquirk.c
@@ -7,14 +7,22 @@
 #include <linux/pci.h>
 #include <asm/pci-direct.h>
 #include <asm/acpi.h>
+#include <asm/apic.h>
 
 static int __init check_bridge(int vendor, int device)
 {
+#ifdef CONFIG_ACPI
         /* According to Nvidia all timer overrides are bogus. Just ignore
            them all. */
         if (vendor == PCI_VENDOR_ID_NVIDIA) {
                 acpi_skip_timer_override = 1;
         }
+#endif
+        if (vendor == PCI_VENDOR_ID_ATI && timer_over_8254 == 1) {
+                timer_over_8254 = 0;
+                printk(KERN_INFO "ATI board detected. Disabling timer routing "
+                                "over 8254.\n");
+        }
         return 0;
 }
 
diff --git a/arch/i386/kernel/io_apic.c b/arch/i386/kernel/io_apic.c
index 235822b3f41b..39d9a5fa907e 100644
--- a/arch/i386/kernel/io_apic.c
+++ b/arch/i386/kernel/io_apic.c
@@ -51,6 +51,8 @@ static struct { int pin, apic; } ioapic_i8259 = { -1, -1 };
 
 static DEFINE_SPINLOCK(ioapic_lock);
 
+int timer_over_8254 __initdata = 1;
+
 /*
  *      Is the SiS APIC rmw bug present ?
  *      -1 = don't know, 0 = no, 1 = yes
@@ -2267,7 +2269,8 @@ static inline void check_timer(void)
         apic_write_around(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT);
         init_8259A(1);
         timer_ack = 1;
-        enable_8259A_irq(0);
+        if (timer_over_8254 > 0)
+                enable_8259A_irq(0);
 
         pin1  = find_isa_irq_pin(0, mp_INT);
         apic1 = find_isa_irq_apic(0, mp_INT);
@@ -2392,6 +2395,20 @@ void __init setup_IO_APIC(void)
                 print_IO_APIC();
 }
 
+static int __init setup_disable_8254_timer(char *s)
+{
+        timer_over_8254 = -1;
+        return 1;
+}
+static int __init setup_enable_8254_timer(char *s)
+{
+        timer_over_8254 = 2;
+        return 1;
+}
+
+__setup("disable_8254_timer", setup_disable_8254_timer);
+__setup("enable_8254_timer", setup_enable_8254_timer);
+
 /*
  *      Called after all the initialization is done. If we didnt find any
  *      APIC bugs then we can allow the modify fast path
diff --git a/arch/i386/kernel/setup.c b/arch/i386/kernel/setup.c
index 51e513b4f72d..ab62a9f4701e 100644
--- a/arch/i386/kernel/setup.c
+++ b/arch/i386/kernel/setup.c
@@ -1599,6 +1599,10 @@ void __init setup_arch(char **cmdline_p)
         if (efi_enabled)
                 efi_map_memmap();
 
+#ifdef CONFIG_X86_IO_APIC
+        check_acpi_pci();       /* Checks more than just ACPI actually */
+#endif
+
 #ifdef CONFIG_ACPI
         /*
          * Parse the ACPI tables for possible boot-time SMP configuration.