x86: move i386 and x86_64 Kconfig files to x86 directory

After a small change in kconfig Makefile we could
move all x86 Kconfig files to x86 directory.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>

1 files changed, 0 insertions, 372 deletions

diff --git a/arch/i386/Kconfig.cpu b/arch/i386/Kconfig.cpu
deleted file mode 100644
index 0e2adadf5905..000000000000
--- a/arch/i386/Kconfig.cpu
+++ /dev/null
@@ -1,372 +0,0 @@
-# Put here option for CPU selection and depending optimization
-if !X86_ELAN
-
-choice
-        prompt "Processor family"
-        default M686
-
-config M386
-        bool "386"
-        depends on !UML
-        ---help---
-          This is the processor type of your CPU. This information is used for
-          optimizing purposes. In order to compile a kernel that can run on
-          all x86 CPU types (albeit not optimally fast), you can specify
-          "386" here.
-
-          The kernel will not necessarily run on earlier architectures than
-          the one you have chosen, e.g. a Pentium optimized kernel will run on
-          a PPro, but not necessarily on a i486.
-
-          Here are the settings recommended for greatest speed:
-          - "386" for the AMD/Cyrix/Intel 386DX/DXL/SL/SLC/SX, Cyrix/TI
-          486DLC/DLC2, UMC 486SX-S and NexGen Nx586.  Only "386" kernels
-          will run on a 386 class machine.
-          - "486" for the AMD/Cyrix/IBM/Intel 486DX/DX2/DX4 or
-          SL/SLC/SLC2/SLC3/SX/SX2 and UMC U5D or U5S.
-          - "586" for generic Pentium CPUs lacking the TSC
-          (time stamp counter) register.
-          - "Pentium-Classic" for the Intel Pentium.
-          - "Pentium-MMX" for the Intel Pentium MMX.
-          - "Pentium-Pro" for the Intel Pentium Pro.
-          - "Pentium-II" for the Intel Pentium II or pre-Coppermine Celeron.
-          - "Pentium-III" for the Intel Pentium III or Coppermine Celeron.
-          - "Pentium-4" for the Intel Pentium 4 or P4-based Celeron.
-          - "K6" for the AMD K6, K6-II and K6-III (aka K6-3D).
-          - "Athlon" for the AMD K7 family (Athlon/Duron/Thunderbird).
-          - "Crusoe" for the Transmeta Crusoe series.
-          - "Efficeon" for the Transmeta Efficeon series.
-          - "Winchip-C6" for original IDT Winchip.
-          - "Winchip-2" for IDT Winchip 2.
-          - "Winchip-2A" for IDT Winchips with 3dNow! capabilities.
-          - "GeodeGX1" for Geode GX1 (Cyrix MediaGX).
-          - "Geode GX/LX" For AMD Geode GX and LX processors.
-          - "CyrixIII/VIA C3" for VIA Cyrix III or VIA C3.
-          - "VIA C3-2" for VIA C3-2 "Nehemiah" (model 9 and above).
-          - "VIA C7" for VIA C7.
-
-          If you don't know what to do, choose "386".
-
-config M486
-        bool "486"
-        help
-          Select this for a 486 series processor, either Intel or one of the
-          compatible processors from AMD, Cyrix, IBM, or Intel.  Includes DX,
-          DX2, and DX4 variants; also SL/SLC/SLC2/SLC3/SX/SX2 and UMC U5D or
-          U5S.
-
-config M586
-        bool "586/K5/5x86/6x86/6x86MX"
-        help
-          Select this for an 586 or 686 series processor such as the AMD K5,
-          the Cyrix 5x86, 6x86 and 6x86MX.  This choice does not
-          assume the RDTSC (Read Time Stamp Counter) instruction.
-
-config M586TSC
-        bool "Pentium-Classic"
-        help
-          Select this for a Pentium Classic processor with the RDTSC (Read
-          Time Stamp Counter) instruction for benchmarking.
-
-config M586MMX
-        bool "Pentium-MMX"
-        help
-          Select this for a Pentium with the MMX graphics/multimedia
-          extended instructions.
-
-config M686
-        bool "Pentium-Pro"
-        help
-          Select this for Intel Pentium Pro chips.  This enables the use of
-          Pentium Pro extended instructions, and disables the init-time guard
-          against the f00f bug found in earlier Pentiums.
-
-config MPENTIUMII
-        bool "Pentium-II/Celeron(pre-Coppermine)"
-        help
-          Select this for Intel chips based on the Pentium-II and
-          pre-Coppermine Celeron core.  This option enables an unaligned
-          copy optimization, compiles the kernel with optimization flags
-          tailored for the chip, and applies any applicable Pentium Pro
-          optimizations.
-
-config MPENTIUMIII
-        bool "Pentium-III/Celeron(Coppermine)/Pentium-III Xeon"
-        help
-          Select this for Intel chips based on the Pentium-III and
-          Celeron-Coppermine core.  This option enables use of some
-          extended prefetch instructions in addition to the Pentium II
-          extensions.
-
-config MPENTIUMM
-        bool "Pentium M"
-        help
-          Select this for Intel Pentium M (not Pentium-4 M)
-          notebook chips.
-
-config MCORE2
-        bool "Core 2/newer Xeon"
-        help
-          Select this for Intel Core 2 and newer Core 2 Xeons (Xeon 51xx and 53xx)
-          CPUs. You can distinguish newer from older Xeons by the CPU family
-          in /proc/cpuinfo. Newer ones have 6 and older ones 15 (not a typo)
-
-config MPENTIUM4
-        bool "Pentium-4/Celeron(P4-based)/Pentium-4 M/older Xeon"
-        help
-          Select this for Intel Pentium 4 chips.  This includes the
-          Pentium 4, Pentium D, P4-based Celeron and Xeon, and
-          Pentium-4 M (not Pentium M) chips.  This option enables compile
-          flags optimized for the chip, uses the correct cache line size, and
-          applies any applicable optimizations.
-
-          CPUIDs: F[0-6][1-A] (in /proc/cpuinfo show = cpu family : 15 )
-
-          Select this for:
-            Pentiums (Pentium 4, Pentium D, Celeron, Celeron D) corename:
-                -Willamette
-                -Northwood
-                -Mobile Pentium 4
-                -Mobile Pentium 4 M
-                -Extreme Edition (Gallatin)
-                -Prescott
-                -Prescott 2M
-                -Cedar Mill
-                -Presler
-                -Smithfiled
-            Xeons (Intel Xeon, Xeon MP, Xeon LV, Xeon MV) corename:
-                -Foster
-                -Prestonia
-                -Gallatin
-                -Nocona
-                -Irwindale
-                -Cranford
-                -Potomac
-                -Paxville
-                -Dempsey
-
-
-config MK6
-        bool "K6/K6-II/K6-III"
-        help
-          Select this for an AMD K6-family processor.  Enables use of
-          some extended instructions, and passes appropriate optimization
-          flags to GCC.
-
-config MK7
-        bool "Athlon/Duron/K7"
-        help
-          Select this for an AMD Athlon K7-family processor.  Enables use of
-          some extended instructions, and passes appropriate optimization
-          flags to GCC.
-
-config MK8
-        bool "Opteron/Athlon64/Hammer/K8"
-        help
-          Select this for an AMD Opteron or Athlon64 Hammer-family processor.  Enables
-          use of some extended instructions, and passes appropriate optimization
-          flags to GCC.
-
-config MCRUSOE
-        bool "Crusoe"
-        help
-          Select this for a Transmeta Crusoe processor.  Treats the processor
-          like a 586 with TSC, and sets some GCC optimization flags (like a
-          Pentium Pro with no alignment requirements).
-
-config MEFFICEON
-        bool "Efficeon"
-        help
-          Select this for a Transmeta Efficeon processor.
-
-config MWINCHIPC6
-        bool "Winchip-C6"
-        help
-          Select this for an IDT Winchip C6 chip.  Linux and GCC
-          treat this chip as a 586TSC with some extended instructions
-          and alignment requirements.
-
-config MWINCHIP2
-        bool "Winchip-2"
-        help
-          Select this for an IDT Winchip-2.  Linux and GCC
-          treat this chip as a 586TSC with some extended instructions
-          and alignment requirements.
-
-config MWINCHIP3D
-        bool "Winchip-2A/Winchip-3"
-        help
-          Select this for an IDT Winchip-2A or 3.  Linux and GCC
-          treat this chip as a 586TSC with some extended instructions
-          and alignment requirements.  Also enable out of order memory
-          stores for this CPU, which can increase performance of some
-          operations.
-
-config MGEODEGX1
-        bool "GeodeGX1"
-        help
-          Select this for a Geode GX1 (Cyrix MediaGX) chip.
-
-config MGEODE_LX
-       bool "Geode GX/LX"
-       help
-         Select this for AMD Geode GX and LX processors.
-
-config MCYRIXIII
-        bool "CyrixIII/VIA-C3"
-        help
-          Select this for a Cyrix III or C3 chip.  Presently Linux and GCC
-          treat this chip as a generic 586. Whilst the CPU is 686 class,
-          it lacks the cmov extension which gcc assumes is present when
-          generating 686 code.
-          Note that Nehemiah (Model 9) and above will not boot with this
-          kernel due to them lacking the 3DNow! instructions used in earlier
-          incarnations of the CPU.
-
-config MVIAC3_2
-        bool "VIA C3-2 (Nehemiah)"
-        help
-          Select this for a VIA C3 "Nehemiah". Selecting this enables usage
-          of SSE and tells gcc to treat the CPU as a 686.
-          Note, this kernel will not boot on older (pre model 9) C3s.
-
-config MVIAC7
-        bool "VIA C7"
-        help
-          Select this for a VIA C7.  Selecting this uses the correct cache
-          shift and tells gcc to treat the CPU as a 686.
-
-endchoice
-
-config X86_GENERIC
-       bool "Generic x86 support"
-       help
-          Instead of just including optimizations for the selected
-          x86 variant (e.g. PII, Crusoe or Athlon), include some more
-          generic optimizations as well. This will make the kernel
-          perform better on x86 CPUs other than that selected.
-
-          This is really intended for distributors who need more
-          generic optimizations.
-
-endif
-
-#
-# Define implied options from the CPU selection here
-#
-config X86_CMPXCHG
-        bool
-        depends on !M386
-        default y
-
-config X86_L1_CACHE_SHIFT
-        int
-        default "7" if MPENTIUM4 || X86_GENERIC
-        default "4" if X86_ELAN || M486 || M386 || MGEODEGX1
-        default "5" if MWINCHIP3D || MWINCHIP2 || MWINCHIPC6 || MCRUSOE || MEFFICEON || MCYRIXIII || MK6 || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || M586 || MVIAC3_2 || MGEODE_LX
-        default "6" if MK7 || MK8 || MPENTIUMM || MCORE2 || MVIAC7
-
-config X86_XADD
-        bool
-        depends on !M386
-        default y
-
-config RWSEM_GENERIC_SPINLOCK
-        bool
-        depends on !X86_XADD
-        default y
-
-config RWSEM_XCHGADD_ALGORITHM
-        bool
-        depends on X86_XADD
-        default y
-
-config ARCH_HAS_ILOG2_U32
-        bool
-        default n
-
-config ARCH_HAS_ILOG2_U64
-        bool
-        default n
-
-config GENERIC_CALIBRATE_DELAY
-        bool
-        default y
-
-config X86_PPRO_FENCE
-        bool
-        depends on M686 || M586MMX || M586TSC || M586 || M486 || M386 || MGEODEGX1
-        default y
-
-config X86_F00F_BUG
-        bool
-        depends on M586MMX || M586TSC || M586 || M486 || M386
-        default y
-
-config X86_WP_WORKS_OK
-        bool
-        depends on !M386
-        default y
-
-config X86_INVLPG
-        bool
-        depends on !M386
-        default y
-
-config X86_BSWAP
-        bool
-        depends on !M386
-        default y
-
-config X86_POPAD_OK
-        bool
-        depends on !M386
-        default y
-
-config X86_ALIGNMENT_16
-        bool
-        depends on MWINCHIP3D || MWINCHIP2 || MWINCHIPC6 || MCYRIXIII || X86_ELAN || MK6 || M586MMX || M586TSC || M586 || M486 || MVIAC3_2 || MGEODEGX1
-        default y
-
-config X86_GOOD_APIC
-        bool
-        depends on MK7 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || MK8 || MEFFICEON || MCORE2 || MVIAC7
-        default y
-
-config X86_INTEL_USERCOPY
-        bool
-        depends on MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M586MMX || X86_GENERIC || MK8 || MK7 || MEFFICEON || MCORE2
-        default y
-
-config X86_USE_PPRO_CHECKSUM
-        bool
-        depends on MWINCHIP3D || MWINCHIP2 || MWINCHIPC6 || MCYRIXIII || MK7 || MK6 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || MK8 || MVIAC3_2 || MEFFICEON || MGEODE_LX || MCORE2
-        default y
-
-config X86_USE_3DNOW
-        bool
-        depends on (MCYRIXIII || MK7 || MGEODE_LX) && !UML
-        default y
-
-config X86_OOSTORE
-        bool
-        depends on (MWINCHIP3D || MWINCHIP2 || MWINCHIPC6) && MTRR
-        default y
-
-config X86_TSC
-        bool
-        depends on (MWINCHIP3D || MWINCHIP2 || MCRUSOE || MEFFICEON || MCYRIXIII || MK7 || MK6 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || MK8 || MVIAC3_2 || MVIAC7 || MGEODEGX1 || MGEODE_LX || MCORE2) && !X86_NUMAQ
-        default y
-
-# this should be set for all -march=.. options where the compiler
-# generates cmov.
-config X86_CMOV
-        bool
-        depends on (MK7 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || MVIAC3_2 || MVIAC7)
-        default y
-
-config X86_MINIMUM_CPU_FAMILY
-        int
-        default "4" if X86_XADD || X86_CMPXCHG || X86_BSWAP || X86_WP_WORKS_OK
-        default "3"
-