Merge branch 'master' of /home/davem/src/GIT/linux-2.6/

Conflicts:
	drivers/net/wimax/i2400m/usb-notif.c

73 files changed, 607 insertions, 1601 deletions

diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig
index 8f1f97d56e1e..0c1f86e3e44a 100644
--- a/arch/blackfin/Kconfig
+++ b/arch/blackfin/Kconfig
@@ -1129,6 +1129,7 @@ endchoice
 
 config PM_WAKEUP_BY_GPIO
         bool "Allow Wakeup from Standby by GPIO"
+        depends on PM && !BF54x
 
 config PM_WAKEUP_GPIO_NUMBER
         int "GPIO number"
@@ -1168,6 +1169,12 @@ config PM_BFIN_WAKE_GP
         default n
         help
           Enable General-Purpose Wake-Up (Voltage Regulator Power-Up)
+          (all processors, except ADSP-BF549). This option sets
+          the general-purpose wake-up enable (GPWE) control bit to enable
+          wake-up upon detection of an active low signal on the /GPW (PH7) pin.
+          On ADSP-BF549 this option enables the the same functionality on the
+          /MRXON pin also PH7.
+
 endmenu
 
 menu "CPU Frequency scaling"
diff --git a/arch/blackfin/Kconfig.debug b/arch/blackfin/Kconfig.debug
index 5f981d9ca625..79e7e63ab709 100644
--- a/arch/blackfin/Kconfig.debug
+++ b/arch/blackfin/Kconfig.debug
@@ -21,12 +21,6 @@ config DEBUG_STACK_USAGE
 config HAVE_ARCH_KGDB
         def_bool y
 
-config KGDB_TESTCASE
-        tristate "KGDB: for test case in expect"
-        default n
-        help
-          This is a kgdb test case for automated testing.
-
 config DEBUG_VERBOSE
         bool "Verbose fault messages"
         default y
diff --git a/arch/blackfin/configs/BF518F-EZBRD_defconfig b/arch/blackfin/configs/BF518F-EZBRD_defconfig
index 4fdb9e04759f..281f4b60e603 100644
--- a/arch/blackfin/configs/BF518F-EZBRD_defconfig
+++ b/arch/blackfin/configs/BF518F-EZBRD_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc2
-# Fri Jan  9 17:58:41 2009
+# Linux kernel version: 2.6.28
+# Fri Feb 20 10:01:44 2009
 #
 # CONFIG_MMU is not set
 # CONFIG_FPU is not set
@@ -133,10 +133,15 @@ CONFIG_BF518=y
 # CONFIG_BF538 is not set
 # CONFIG_BF539 is not set
 # CONFIG_BF542 is not set
+# CONFIG_BF542M is not set
 # CONFIG_BF544 is not set
+# CONFIG_BF544M is not set
 # CONFIG_BF547 is not set
+# CONFIG_BF547M is not set
 # CONFIG_BF548 is not set
+# CONFIG_BF548M is not set
 # CONFIG_BF549 is not set
+# CONFIG_BF549M is not set
 # CONFIG_BF561 is not set
 CONFIG_BF_REV_MIN=0
 CONFIG_BF_REV_MAX=2
@@ -426,7 +431,17 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
+CONFIG_NET_DSA=y
+# CONFIG_NET_DSA_TAG_DSA is not set
+# CONFIG_NET_DSA_TAG_EDSA is not set
+# CONFIG_NET_DSA_TAG_TRAILER is not set
+CONFIG_NET_DSA_TAG_STPID=y
+# CONFIG_NET_DSA_MV88E6XXX is not set
+# CONFIG_NET_DSA_MV88E6060 is not set
+# CONFIG_NET_DSA_MV88E6XXX_NEED_PPU is not set
+# CONFIG_NET_DSA_MV88E6131 is not set
+# CONFIG_NET_DSA_MV88E6123_61_65 is not set
+CONFIG_NET_DSA_KSZ8893M=y
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -529,6 +544,8 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y
 #
 # Self-contained MTD device drivers
 #
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
@@ -561,7 +578,9 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -607,6 +626,7 @@ CONFIG_BFIN_RX_DESC_NUM=20
 # CONFIG_SMC91X is not set
 # CONFIG_SMSC911X is not set
 # CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -764,7 +784,23 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_BFIN=y
+# CONFIG_SPI_BFIN_LOCK is not set
+# CONFIG_SPI_BITBANG is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -788,8 +824,10 @@ CONFIG_BFIN_WDT=y
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -861,10 +899,18 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
 
 #
 # SPI RTC drivers
 #
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
 
 #
 # Platform RTC drivers
@@ -1062,12 +1108,20 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_FAULT_INJECTION is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+
+#
+# Tracers
+#
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_KGDB_TESTCASE is not set
 CONFIG_DEBUG_VERBOSE=y
 CONFIG_DEBUG_MMRS=y
 # CONFIG_DEBUG_HWERR is not set
@@ -1100,6 +1154,7 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
diff --git a/arch/blackfin/configs/BF527-EZKIT_defconfig b/arch/blackfin/configs/BF527-EZKIT_defconfig
index 833128b39724..a50050f17706 100644
--- a/arch/blackfin/configs/BF527-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF527-EZKIT_defconfig
@@ -327,8 +327,8 @@ CONFIG_BFIN_ICACHE=y
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
 # CONFIG_BFIN_ICACHE_LOCK is not set
-# CONFIG_BFIN_WB is not set
-CONFIG_BFIN_WT=y
+CONFIG_BFIN_WB=y
+# CONFIG_BFIN_WT is not set
 # CONFIG_MPU is not set
 
 #
diff --git a/arch/blackfin/configs/BF533-EZKIT_defconfig b/arch/blackfin/configs/BF533-EZKIT_defconfig
index 334c94b51c40..0a2a00d63887 100644
--- a/arch/blackfin/configs/BF533-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF533-EZKIT_defconfig
@@ -290,8 +290,8 @@ CONFIG_BFIN_ICACHE=y
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
 # CONFIG_BFIN_ICACHE_LOCK is not set
-# CONFIG_BFIN_WB is not set
-CONFIG_BFIN_WT=y
+CONFIG_BFIN_WB=y
+# CONFIG_BFIN_WT is not set
 # CONFIG_MPU is not set
 
 #
diff --git a/arch/blackfin/configs/BF533-STAMP_defconfig b/arch/blackfin/configs/BF533-STAMP_defconfig
index 9d733436e300..eb027587a355 100644
--- a/arch/blackfin/configs/BF533-STAMP_defconfig
+++ b/arch/blackfin/configs/BF533-STAMP_defconfig
@@ -290,8 +290,8 @@ CONFIG_BFIN_ICACHE=y
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
 # CONFIG_BFIN_ICACHE_LOCK is not set
-# CONFIG_BFIN_WB is not set
-CONFIG_BFIN_WT=y
+CONFIG_BFIN_WB=y
+# CONFIG_BFIN_WT is not set
 # CONFIG_MPU is not set
 
 #
diff --git a/arch/blackfin/configs/BF537-STAMP_defconfig b/arch/blackfin/configs/BF537-STAMP_defconfig
index 4fb4108d3103..9e62b9f40eb1 100644
--- a/arch/blackfin/configs/BF537-STAMP_defconfig
+++ b/arch/blackfin/configs/BF537-STAMP_defconfig
@@ -298,8 +298,8 @@ CONFIG_BFIN_ICACHE=y
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
 # CONFIG_BFIN_ICACHE_LOCK is not set
-# CONFIG_BFIN_WB is not set
-CONFIG_BFIN_WT=y
+CONFIG_BFIN_WB=y
+# CONFIG_BFIN_WT is not set
 # CONFIG_MPU is not set
 
 #
@@ -568,15 +568,7 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
 # CONFIG_MTD_DOC2000 is not set
 # CONFIG_MTD_DOC2001 is not set
 # CONFIG_MTD_DOC2001PLUS is not set
-CONFIG_MTD_NAND=m
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_BFIN is not set
-CONFIG_MTD_NAND_IDS=m
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-CONFIG_MTD_NAND_PLATFORM=m
+# CONFIG_MTD_NAND is not set
 # CONFIG_MTD_ONENAND is not set
 
 #
diff --git a/arch/blackfin/configs/BF538-EZKIT_defconfig b/arch/blackfin/configs/BF538-EZKIT_defconfig
index cb32f5624a1b..dd6ad6be1c87 100644
--- a/arch/blackfin/configs/BF538-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF538-EZKIT_defconfig
@@ -306,8 +306,8 @@ CONFIG_BFIN_ICACHE=y
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
 # CONFIG_BFIN_ICACHE_LOCK is not set
-# CONFIG_BFIN_WB is not set
-CONFIG_BFIN_WT=y
+CONFIG_BFIN_WB=y
+# CONFIG_BFIN_WT is not set
 # CONFIG_MPU is not set
 
 #
diff --git a/arch/blackfin/configs/BF548-EZKIT_defconfig b/arch/blackfin/configs/BF548-EZKIT_defconfig
index 0f8697618aa5..6bc2fb1b2a70 100644
--- a/arch/blackfin/configs/BF548-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF548-EZKIT_defconfig
@@ -361,8 +361,8 @@ CONFIG_BFIN_ICACHE=y
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
 # CONFIG_BFIN_ICACHE_LOCK is not set
-# CONFIG_BFIN_WB is not set
-CONFIG_BFIN_WT=y
+CONFIG_BFIN_WB=y
+# CONFIG_BFIN_WT is not set
 # CONFIG_BFIN_L2_CACHEABLE is not set
 # CONFIG_MPU is not set
 
@@ -680,7 +680,7 @@ CONFIG_SCSI=y
 CONFIG_SCSI_DMA=y
 # CONFIG_SCSI_TGT is not set
 # CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
+# CONFIG_SCSI_PROC_FS is not set
 
 #
 # SCSI support type (disk, tape, CD-ROM)
diff --git a/arch/blackfin/configs/BF561-EZKIT_defconfig b/arch/blackfin/configs/BF561-EZKIT_defconfig
index 042c7adfccfa..69714fb3e608 100644
--- a/arch/blackfin/configs/BF561-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF561-EZKIT_defconfig
@@ -329,8 +329,8 @@ CONFIG_BFIN_ICACHE=y
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
 # CONFIG_BFIN_ICACHE_LOCK is not set
-# CONFIG_BFIN_WB is not set
-CONFIG_BFIN_WT=y
+CONFIG_BFIN_WB=y
+# CONFIG_BFIN_WT is not set
 # CONFIG_BFIN_L2_CACHEABLE is not set
 # CONFIG_MPU is not set
 
diff --git a/arch/blackfin/configs/BlackStamp_defconfig b/arch/blackfin/configs/BlackStamp_defconfig
index 3a20e281d23c..017c6ea071b5 100644
--- a/arch/blackfin/configs/BlackStamp_defconfig
+++ b/arch/blackfin/configs/BlackStamp_defconfig
@@ -288,8 +288,8 @@ CONFIG_BFIN_ICACHE=y
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
 # CONFIG_BFIN_ICACHE_LOCK is not set
-# CONFIG_BFIN_WB is not set
-CONFIG_BFIN_WT=y
+CONFIG_BFIN_WB=y
+# CONFIG_BFIN_WT is not set
 # CONFIG_MPU is not set
 
 #
diff --git a/arch/blackfin/configs/CM-BF527_defconfig b/arch/blackfin/configs/CM-BF527_defconfig
index 865ed85a5760..d880ef786770 100644
--- a/arch/blackfin/configs/CM-BF527_defconfig
+++ b/arch/blackfin/configs/CM-BF527_defconfig
@@ -332,8 +332,8 @@ CONFIG_BFIN_ICACHE=y
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
 # CONFIG_BFIN_ICACHE_LOCK is not set
-# CONFIG_BFIN_WB is not set
-CONFIG_BFIN_WT=y
+CONFIG_BFIN_WB=y
+# CONFIG_BFIN_WT is not set
 # CONFIG_MPU is not set
 
 #
diff --git a/arch/blackfin/configs/CM-BF548_defconfig b/arch/blackfin/configs/CM-BF548_defconfig
index efe9741b1f14..f410430b4e3d 100644
--- a/arch/blackfin/configs/CM-BF548_defconfig
+++ b/arch/blackfin/configs/CM-BF548_defconfig
@@ -336,8 +336,8 @@ CONFIG_BFIN_ICACHE=y
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
 # CONFIG_BFIN_ICACHE_LOCK is not set
-# CONFIG_BFIN_WB is not set
-CONFIG_BFIN_WT=y
+CONFIG_BFIN_WB=y
+# CONFIG_BFIN_WT is not set
 CONFIG_L1_MAX_PIECE=16
 # CONFIG_MPU is not set
 
@@ -595,7 +595,7 @@ CONFIG_SCSI=y
 CONFIG_SCSI_DMA=y
 # CONFIG_SCSI_TGT is not set
 # CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
+# CONFIG_SCSI_PROC_FS is not set
 
 #
 # SCSI support type (disk, tape, CD-ROM)
diff --git a/arch/blackfin/configs/IP0X_defconfig b/arch/blackfin/configs/IP0X_defconfig
index eae83b5de92f..7db93874c987 100644
--- a/arch/blackfin/configs/IP0X_defconfig
+++ b/arch/blackfin/configs/IP0X_defconfig
@@ -612,7 +612,7 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 CONFIG_SCSI=y
 # CONFIG_SCSI_TGT is not set
 # CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
+# CONFIG_SCSI_PROC_FS is not set
 
 #
 # SCSI support type (disk, tape, CD-ROM)
diff --git a/arch/blackfin/configs/SRV1_defconfig b/arch/blackfin/configs/SRV1_defconfig
index fa580affc9d6..a46529c6ade3 100644
--- a/arch/blackfin/configs/SRV1_defconfig
+++ b/arch/blackfin/configs/SRV1_defconfig
@@ -282,8 +282,8 @@ CONFIG_BFIN_ICACHE=y
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
 # CONFIG_BFIN_ICACHE_LOCK is not set
-# CONFIG_BFIN_WB is not set
-CONFIG_BFIN_WT=y
+CONFIG_BFIN_WB=y
+# CONFIG_BFIN_WT is not set
 CONFIG_L1_MAX_PIECE=16
 
 #
diff --git a/arch/blackfin/include/asm/Kbuild b/arch/blackfin/include/asm/Kbuild
index 606ecfdcc962..09c31418cc08 100644
--- a/arch/blackfin/include/asm/Kbuild
+++ b/arch/blackfin/include/asm/Kbuild
@@ -1,3 +1,4 @@
 include include/asm-generic/Kbuild.asm
 
+unifdef-y += bfin_sport.h
 unifdef-y += fixed_code.h
diff --git a/arch/blackfin/include/asm/bfin_sport.h b/arch/blackfin/include/asm/bfin_sport.h
index fe88a2c19213..65a651db5b07 100644
--- a/arch/blackfin/include/asm/bfin_sport.h
+++ b/arch/blackfin/include/asm/bfin_sport.h
@@ -1,30 +1,9 @@
 /*
- * File:         include/asm-blackfin/bfin_sport.h
- * Based on:
- * Author:       Roy Huang (roy.huang@analog.com)
+ * bfin_sport.h - userspace header for bfin sport driver
  *
- * Created:      Thu Aug. 24 2006
- * Description:
+ * Copyright 2004-2008 Analog Devices Inc.
  *
- * Modified:
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
 
 #ifndef __BFIN_SPORT_H__
@@ -42,11 +21,10 @@
 #define NORM_FORMAT     0x0
 #define ALAW_FORMAT     0x2
 #define ULAW_FORMAT     0x3
-struct sport_register;
 
 /* Function driver which use sport must initialize the structure */
 struct sport_config {
-        /*TDM (multichannels), I2S or other mode */
+        /* TDM (multichannels), I2S or other mode */
         unsigned int mode:3;
 
         /* if TDM mode is selected, channels must be set */
@@ -72,12 +50,18 @@ struct sport_config {
         int serial_clk;
         int fsync_clk;
 
-        unsigned int data_format:2;     /*Normal, u-law or a-law */
+        unsigned int data_format:2;     /* Normal, u-law or a-law */
 
         int word_len;           /* How length of the word in bits, 3-32 bits */
         int dma_enabled;
 };
 
+/* Userspace interface */
+#define SPORT_IOC_MAGIC         'P'
+#define SPORT_IOC_CONFIG        _IOWR('P', 0x01, struct sport_config)
+
+#ifdef __KERNEL__
+
 struct sport_register {
         unsigned short tcr1;
         unsigned short reserved0;
@@ -117,9 +101,6 @@ struct sport_register {
         unsigned long mrcs3;
 };
 
-#define SPORT_IOC_MAGIC         'P'
-#define SPORT_IOC_CONFIG        _IOWR('P', 0x01, struct sport_config)
-
 struct sport_dev {
         struct cdev cdev;       /* Char device structure */
 
@@ -149,6 +130,8 @@ struct sport_dev {
         struct sport_config config;
 };
 
+#endif
+
 #define SPORT_TCR1      0
 #define SPORT_TCR2      1
 #define SPORT_TCLKDIV   2
@@ -169,4 +152,4 @@ struct sport_dev {
 #define SPORT_MRCS2     22
 #define SPORT_MRCS3     23
 
-#endif                          /*__BFIN_SPORT_H__*/
+#endif
diff --git a/arch/blackfin/include/asm/ipipe.h b/arch/blackfin/include/asm/ipipe.h
index 76f53d8b9a0d..343b56361ec9 100644
--- a/arch/blackfin/include/asm/ipipe.h
+++ b/arch/blackfin/include/asm/ipipe.h
@@ -35,9 +35,9 @@
 #include <asm/atomic.h>
 #include <asm/traps.h>
 
-#define IPIPE_ARCH_STRING     "1.8-00"
+#define IPIPE_ARCH_STRING     "1.9-00"
 #define IPIPE_MAJOR_NUMBER    1
-#define IPIPE_MINOR_NUMBER    8
+#define IPIPE_MINOR_NUMBER    9
 #define IPIPE_PATCH_NUMBER    0
 
 #ifdef CONFIG_SMP
@@ -83,9 +83,9 @@ struct ipipe_sysinfo {
                                 "%2 = CYCLES2\n"                \
                                 "CC = %2 == %0\n"               \
                                 "if ! CC jump 1b\n"             \
-                                : "=r" (((unsigned long *)&t)[1]),      \
-                                  "=r" (((unsigned long *)&t)[0]),      \
-                                  "=r" (__cy2)                          \
+                                : "=d,a" (((unsigned long *)&t)[1]),    \
+                                  "=d,a" (((unsigned long *)&t)[0]),    \
+                                  "=d,a" (__cy2)                                \
                                 : /*no input*/ : "CC");                 \
         t;                                                              \
         })
@@ -118,35 +118,40 @@ void __ipipe_disable_irqdesc(struct ipipe_domain *ipd,
 
 #define __ipipe_disable_irq(irq)        (irq_desc[irq].chip->mask(irq))
 
-#define __ipipe_lock_root()                                     \
-        set_bit(IPIPE_ROOTLOCK_FLAG, &ipipe_root_domain->flags)
+static inline int __ipipe_check_tickdev(const char *devname)
+{
+        return 1;
+}
 
-#define __ipipe_unlock_root()                                   \
-        clear_bit(IPIPE_ROOTLOCK_FLAG, &ipipe_root_domain->flags)
+static inline void __ipipe_lock_root(void)
+{
+        set_bit(IPIPE_SYNCDEFER_FLAG, &ipipe_root_cpudom_var(status));
+}
+
+static inline void __ipipe_unlock_root(void)
+{
+        clear_bit(IPIPE_SYNCDEFER_FLAG, &ipipe_root_cpudom_var(status));
+}
 
 void __ipipe_enable_pipeline(void);
 
 #define __ipipe_hook_critical_ipi(ipd) do { } while (0)
 
-#define __ipipe_sync_pipeline(syncmask)                                 \
-        do {                                                            \
-                struct ipipe_domain *ipd = ipipe_current_domain;        \
-                if (likely(ipd != ipipe_root_domain || !test_bit(IPIPE_ROOTLOCK_FLAG, &ipd->flags))) \
-                        __ipipe_sync_stage(syncmask);                   \
-        } while (0)
+#define __ipipe_sync_pipeline  ___ipipe_sync_pipeline
+void ___ipipe_sync_pipeline(unsigned long syncmask);
 
 void __ipipe_handle_irq(unsigned irq, struct pt_regs *regs);
 
 int __ipipe_get_irq_priority(unsigned irq);
 
-int __ipipe_get_irqthread_priority(unsigned irq);
-
 void __ipipe_stall_root_raw(void);
 
 void __ipipe_unstall_root_raw(void);
 
 void __ipipe_serial_debug(const char *fmt, ...);
 
+asmlinkage void __ipipe_call_irqtail(unsigned long addr);
+
 DECLARE_PER_CPU(struct pt_regs, __ipipe_tick_regs);
 
 extern unsigned long __ipipe_core_clock;
@@ -162,42 +167,25 @@ static inline unsigned long __ipipe_ffnz(unsigned long ul)
 
 #define __ipipe_run_irqtail()  /* Must be a macro */                    \
         do {                                                            \
-                asmlinkage void __ipipe_call_irqtail(void);             \
                 unsigned long __pending;                                \
-                CSYNC();                                        \
+                CSYNC();                                                \
                 __pending = bfin_read_IPEND();                          \
                 if (__pending & 0x8000) {                               \
                         __pending &= ~0x8010;                           \
                         if (__pending && (__pending & (__pending - 1)) == 0) \
-                                __ipipe_call_irqtail();                 \
+                                __ipipe_call_irqtail(__ipipe_irq_tail_hook); \
                 }                                                       \
         } while (0)
 
 #define __ipipe_run_isr(ipd, irq)                                       \
         do {                                                            \
                 if (ipd == ipipe_root_domain) {                         \
-                        /*                                              \
-                         * Note: the I-pipe implements a threaded interrupt model on \
-                         * this arch for Linux external IRQs. The interrupt handler we \
-                         * call here only wakes up the associated IRQ thread. \
-                         */                                             \
-                        if (ipipe_virtual_irq_p(irq)) {                 \
-                                /* No irqtail here; virtual interrupts have no effect \
-                                   on IPEND so there is no need for processing \
-                                   deferral. */                         \
-                                local_irq_enable_nohead(ipd);           \
+                        local_irq_enable_hw();                          \
+                        if (ipipe_virtual_irq_p(irq))                   \
                                 ipd->irqs[irq].handler(irq, ipd->irqs[irq].cookie); \
-                                local_irq_disable_nohead(ipd);          \
-                        } else                                          \
-                                /*                                      \
-                                 * No need to run the irqtail here either; \
-                                 * we can't be preempted by hw IRQs, so \
-                                 * non-Linux IRQs cannot stack over the short \
-                                 * thread wakeup code. Which in turn means \
-                                 * that no irqtail condition could be pending \
-                                 * for domains above Linux in the pipeline. \
-                                 */                                     \
+                        else                                            \
                                 ipd->irqs[irq].handler(irq, &__raw_get_cpu_var(__ipipe_tick_regs)); \
+                        local_irq_disable_hw();                         \
                 } else {                                                \
                         __clear_bit(IPIPE_SYNC_FLAG, &ipipe_cpudom_var(ipd, status)); \
                         local_irq_enable_nohead(ipd);                   \
@@ -217,42 +205,24 @@ void ipipe_init_irq_threads(void);
 
 int ipipe_start_irq_thread(unsigned irq, struct irq_desc *desc);
 
-#define IS_SYSIRQ(irq)          ((irq) > IRQ_CORETMR && (irq) <= SYS_IRQS)
-#define IS_GPIOIRQ(irq)         ((irq) >= GPIO_IRQ_BASE && (irq) < NR_IRQS)
-
+#ifdef CONFIG_GENERIC_CLOCKEVENTS
+#define IRQ_SYSTMR              IRQ_CORETMR
+#define IRQ_PRIOTMR             IRQ_CORETMR
+#else
 #define IRQ_SYSTMR              IRQ_TIMER0
 #define IRQ_PRIOTMR             CONFIG_IRQ_TIMER0
+#endif
 
-#if defined(CONFIG_BF531) || defined(CONFIG_BF532) || defined(CONFIG_BF533)
-#define PRIO_GPIODEMUX(irq)     CONFIG_PFA
-#elif defined(CONFIG_BF534) || defined(CONFIG_BF536) || defined(CONFIG_BF537)
-#define PRIO_GPIODEMUX(irq)     CONFIG_IRQ_PROG_INTA
-#elif defined(CONFIG_BF52x)
-#define PRIO_GPIODEMUX(irq)     ((irq) == IRQ_PORTF_INTA ? CONFIG_IRQ_PORTF_INTA : \
-                                 (irq) == IRQ_PORTG_INTA ? CONFIG_IRQ_PORTG_INTA : \
-                                 (irq) == IRQ_PORTH_INTA ? CONFIG_IRQ_PORTH_INTA : \
-                                 -1)
-#elif defined(CONFIG_BF561)
-#define PRIO_GPIODEMUX(irq)     ((irq) == IRQ_PROG0_INTA ? CONFIG_IRQ_PROG0_INTA : \
-                                 (irq) == IRQ_PROG1_INTA ? CONFIG_IRQ_PROG1_INTA : \
-                                 (irq) == IRQ_PROG2_INTA ? CONFIG_IRQ_PROG2_INTA : \
-                                 -1)
+#ifdef CONFIG_BF561
 #define bfin_write_TIMER_DISABLE(val)   bfin_write_TMRS8_DISABLE(val)
 #define bfin_write_TIMER_ENABLE(val)    bfin_write_TMRS8_ENABLE(val)
 #define bfin_write_TIMER_STATUS(val)    bfin_write_TMRS8_STATUS(val)
 #define bfin_read_TIMER_STATUS()        bfin_read_TMRS8_STATUS()
 #elif defined(CONFIG_BF54x)
-#define PRIO_GPIODEMUX(irq)     ((irq) == IRQ_PINT0 ? CONFIG_IRQ_PINT0 : \
-                                 (irq) == IRQ_PINT1 ? CONFIG_IRQ_PINT1 : \
-                                 (irq) == IRQ_PINT2 ? CONFIG_IRQ_PINT2 : \
-                                 (irq) == IRQ_PINT3 ? CONFIG_IRQ_PINT3 : \
-                                 -1)
 #define bfin_write_TIMER_DISABLE(val)   bfin_write_TIMER_DISABLE0(val)
 #define bfin_write_TIMER_ENABLE(val)    bfin_write_TIMER_ENABLE0(val)
 #define bfin_write_TIMER_STATUS(val)    bfin_write_TIMER_STATUS0(val)
 #define bfin_read_TIMER_STATUS(val)     bfin_read_TIMER_STATUS0(val)
-#else
-# error "no PRIO_GPIODEMUX() for this part"
 #endif
 
 #define __ipipe_root_tick_p(regs)       ((regs->ipend & 0x10) != 0)
@@ -275,4 +245,6 @@ int ipipe_start_irq_thread(unsigned irq, struct irq_desc *desc);
 
 #endif /* !CONFIG_IPIPE */
 
+#define ipipe_update_tick_evtdev(evtdev)        do { } while (0)
+
 #endif  /* !__ASM_BLACKFIN_IPIPE_H */
diff --git a/arch/blackfin/include/asm/ipipe_base.h b/arch/blackfin/include/asm/ipipe_base.h
index cb1025aeabcf..3e8acbd1a3be 100644
--- a/arch/blackfin/include/asm/ipipe_base.h
+++ b/arch/blackfin/include/asm/ipipe_base.h
@@ -1,5 +1,5 @@
 /*   -*- linux-c -*-
- *   include/asm-blackfin/_baseipipe.h
+ *   include/asm-blackfin/ipipe_base.h
  *
  *   Copyright (C) 2007 Philippe Gerum.
  *
@@ -27,8 +27,9 @@
 #define IPIPE_NR_XIRQS          NR_IRQS
 #define IPIPE_IRQ_ISHIFT        5       /* 2^5 for 32bits arch. */
 
-/* Blackfin-specific, global domain flags */
-#define IPIPE_ROOTLOCK_FLAG     1       /* Lock pipeline for root */
+/* Blackfin-specific, per-cpu pipeline status */
+#define IPIPE_SYNCDEFER_FLAG    15
+#define IPIPE_SYNCDEFER_MASK    (1L << IPIPE_SYNCDEFER_MASK)
 
  /* Blackfin traps -- i.e. exception vector numbers */
 #define IPIPE_NR_FAULTS         52 /* We leave a gap after VEC_ILL_RES. */
@@ -48,11 +49,6 @@
 
 #ifndef __ASSEMBLY__
 
-#include <linux/bitops.h>
-
-extern int test_bit(int nr, const void *addr);
-
-
 extern unsigned long __ipipe_root_status; /* Alias to ipipe_root_cpudom_var(status) */
 
 static inline void __ipipe_stall_root(void)
diff --git a/arch/blackfin/include/asm/irq.h b/arch/blackfin/include/asm/irq.h
index 3d977909ce7d..7645e85a5f6f 100644
--- a/arch/blackfin/include/asm/irq.h
+++ b/arch/blackfin/include/asm/irq.h
@@ -61,20 +61,38 @@ void __ipipe_restore_root(unsigned long flags);
 #define raw_irqs_disabled_flags(flags)  (!irqs_enabled_from_flags_hw(flags))
 #define local_test_iflag_hw(x)          irqs_enabled_from_flags_hw(x)
 
-#define local_save_flags(x)                                             \
-        do {                                                            \
-                (x) = __ipipe_test_root() ? \
+#define local_save_flags(x)                                      \
+        do {                                                     \
+                (x) = __ipipe_test_root() ?                      \
                         __all_masked_irq_flags : bfin_irq_flags; \
+                barrier();                                       \
         } while (0)
 
-#define local_irq_save(x)                               \
-        do {                                            \
-                (x) = __ipipe_test_and_stall_root();    \
+#define local_irq_save(x)                                        \
+        do {                                                     \
+                (x) = __ipipe_test_and_stall_root() ?            \
+                        __all_masked_irq_flags : bfin_irq_flags; \
+                barrier();                                       \
+        } while (0)
+
+static inline void local_irq_restore(unsigned long x)
+{
+        barrier();
+        __ipipe_restore_root(x == __all_masked_irq_flags);
+}
+
+#define local_irq_disable()                     \
+        do {                                    \
+                __ipipe_stall_root();           \
+                barrier();                      \
         } while (0)
 
-#define local_irq_restore(x)    __ipipe_restore_root(x)
-#define local_irq_disable()     __ipipe_stall_root()
-#define local_irq_enable()      __ipipe_unstall_root()
+static inline void local_irq_enable(void)
+{
+        barrier();
+        __ipipe_unstall_root();
+}
+
 #define irqs_disabled()         __ipipe_test_root()
 
 #define local_save_flags_hw(x) \
diff --git a/arch/blackfin/include/asm/thread_info.h b/arch/blackfin/include/asm/thread_info.h
index e721ce55956c..2920087516f2 100644
--- a/arch/blackfin/include/asm/thread_info.h
+++ b/arch/blackfin/include/asm/thread_info.h
@@ -122,6 +122,7 @@ static inline struct thread_info *current_thread_info(void)
 #define TIF_MEMDIE              4
 #define TIF_RESTORE_SIGMASK     5       /* restore signal mask in do_signal() */
 #define TIF_FREEZE              6       /* is freezing for suspend */
+#define TIF_IRQ_SYNC            7       /* sync pipeline stage */
 
 /* as above, but as bit values */
 #define _TIF_SYSCALL_TRACE      (1<<TIF_SYSCALL_TRACE)
@@ -130,6 +131,7 @@ static inline struct thread_info *current_thread_info(void)
 #define _TIF_POLLING_NRFLAG     (1<<TIF_POLLING_NRFLAG)
 #define _TIF_RESTORE_SIGMASK    (1<<TIF_RESTORE_SIGMASK)
 #define _TIF_FREEZE             (1<<TIF_FREEZE)
+#define _TIF_IRQ_SYNC           (1<<TIF_IRQ_SYNC)
 
 #define _TIF_WORK_MASK          0x0000FFFE      /* work to do on interrupt/exception return */
 
diff --git a/arch/blackfin/kernel/Makefile b/arch/blackfin/kernel/Makefile
index 4a92a86824b7..fd4d4328a0f2 100644
--- a/arch/blackfin/kernel/Makefile
+++ b/arch/blackfin/kernel/Makefile
@@ -15,13 +15,15 @@ else
     obj-y += time.o
 endif
 
-CFLAGS_kgdb_test.o := -mlong-calls -O0
-
 obj-$(CONFIG_IPIPE)                  += ipipe.o
 obj-$(CONFIG_IPIPE_TRACE_MCOUNT)     += mcount.o
 obj-$(CONFIG_BFIN_GPTIMERS)          += gptimers.o
 obj-$(CONFIG_CPLB_INFO)              += cplbinfo.o
 obj-$(CONFIG_MODULES)                += module.o
 obj-$(CONFIG_KGDB)                   += kgdb.o
-obj-$(CONFIG_KGDB_TESTCASE)          += kgdb_test.o
+obj-$(CONFIG_KGDB_TESTS)             += kgdb_test.o
 obj-$(CONFIG_EARLY_PRINTK)           += early_printk.o
+
+# the kgdb test puts code into L2 and without linker
+# relaxation, we need to force long calls to/from it
+CFLAGS_kgdb_test.o := -mlong-calls -O0
diff --git a/arch/blackfin/kernel/cplb-nompu/cplbinit.c b/arch/blackfin/kernel/cplb-nompu/cplbinit.c
index 0e28f7595733..d6c067782e63 100644
--- a/arch/blackfin/kernel/cplb-nompu/cplbinit.c
+++ b/arch/blackfin/kernel/cplb-nompu/cplbinit.c
@@ -53,9 +53,13 @@ void __init generate_cplb_tables_cpu(unsigned int cpu)
 
         i_d = i_i = 0;
 
+#ifdef CONFIG_DEBUG_HUNT_FOR_ZERO
         /* Set up the zero page.  */
         d_tbl[i_d].addr = 0;
         d_tbl[i_d++].data = SDRAM_OOPS | PAGE_SIZE_1KB;
+        i_tbl[i_i].addr = 0;
+        i_tbl[i_i++].data = SDRAM_OOPS | PAGE_SIZE_1KB;
+#endif
 
         /* Cover kernel memory with 4M pages.  */
         addr = 0;
diff --git a/arch/blackfin/kernel/ipipe.c b/arch/blackfin/kernel/ipipe.c
index 339be5a3ae6a..a5de8d45424c 100644
--- a/arch/blackfin/kernel/ipipe.c
+++ b/arch/blackfin/kernel/ipipe.c
@@ -35,14 +35,8 @@
 #include <asm/atomic.h>
 #include <asm/io.h>
 
-static int create_irq_threads;
-
 DEFINE_PER_CPU(struct pt_regs, __ipipe_tick_regs);
 
-static DEFINE_PER_CPU(unsigned long, pending_irqthread_mask);
-
-static DEFINE_PER_CPU(int [IVG13 + 1], pending_irq_count);
-
 asmlinkage void asm_do_IRQ(unsigned int irq, struct pt_regs *regs);
 
 static void __ipipe_no_irqtail(void);
@@ -93,6 +87,7 @@ void __ipipe_enable_pipeline(void)
  */
 void __ipipe_handle_irq(unsigned irq, struct pt_regs *regs)
 {
+        struct ipipe_percpu_domain_data *p = ipipe_root_cpudom_ptr();
         struct ipipe_domain *this_domain, *next_domain;
         struct list_head *head, *pos;
         int m_ack, s = -1;
@@ -104,7 +99,6 @@ void __ipipe_handle_irq(unsigned irq, struct pt_regs *regs)
          * interrupt.
          */
         m_ack = (regs == NULL || irq == IRQ_SYSTMR || irq == IRQ_CORETMR);
-
         this_domain = ipipe_current_domain;
 
         if (unlikely(test_bit(IPIPE_STICKY_FLAG, &this_domain->irqs[irq].control)))
@@ -114,49 +108,28 @@ void __ipipe_handle_irq(unsigned irq, struct pt_regs *regs)
                 next_domain = list_entry(head, struct ipipe_domain, p_link);
                 if (likely(test_bit(IPIPE_WIRED_FLAG, &next_domain->irqs[irq].control))) {
                         if (!m_ack && next_domain->irqs[irq].acknowledge != NULL)
-                                next_domain->irqs[irq].acknowledge(irq, irq_desc + irq);
-                        if (test_bit(IPIPE_ROOTLOCK_FLAG, &ipipe_root_domain->flags))
-                                s = __test_and_set_bit(IPIPE_STALL_FLAG,
-                                                       &ipipe_root_cpudom_var(status));
+                                next_domain->irqs[irq].acknowledge(irq, irq_to_desc(irq));
+                        if (test_bit(IPIPE_SYNCDEFER_FLAG, &p->status))
+                                s = __test_and_set_bit(IPIPE_STALL_FLAG, &p->status);
                         __ipipe_dispatch_wired(next_domain, irq);
-                                goto finalize;
-                        return;
+                        goto out;
                 }
         }
 
         /* Ack the interrupt. */
 
         pos = head;
-
         while (pos != &__ipipe_pipeline) {
                 next_domain = list_entry(pos, struct ipipe_domain, p_link);
-                /*
-                 * For each domain handling the incoming IRQ, mark it
-                 * as pending in its log.
-                 */
                 if (test_bit(IPIPE_HANDLE_FLAG, &next_domain->irqs[irq].control)) {
-                        /*
-                         * Domains that handle this IRQ are polled for
-                         * acknowledging it by decreasing priority
-                         * order. The interrupt must be made pending
-                         * _first_ in the domain's status flags before
-                         * the PIC is unlocked.
-                         */
                         __ipipe_set_irq_pending(next_domain, irq);
-
                         if (!m_ack && next_domain->irqs[irq].acknowledge != NULL) {
-                                next_domain->irqs[irq].acknowledge(irq, irq_desc + irq);
+                                next_domain->irqs[irq].acknowledge(irq, irq_to_desc(irq));
                                 m_ack = 1;
                         }
                 }
-
-                /*
-                 * If the domain does not want the IRQ to be passed
-                 * down the interrupt pipe, exit the loop now.
-                 */
                 if (!test_bit(IPIPE_PASS_FLAG, &next_domain->irqs[irq].control))
                         break;
-
                 pos = next_domain->p_link.next;
         }
 
@@ -166,18 +139,24 @@ void __ipipe_handle_irq(unsigned irq, struct pt_regs *regs)
          * immediately to the current domain if the interrupt has been
          * marked as 'sticky'. This search does not go beyond the
          * current domain in the pipeline. We also enforce the
-         * additional root stage lock (blackfin-specific). */
+         * additional root stage lock (blackfin-specific).
+         */
+        if (test_bit(IPIPE_SYNCDEFER_FLAG, &p->status))
+                s = __test_and_set_bit(IPIPE_STALL_FLAG, &p->status);
 
-        if (test_bit(IPIPE_ROOTLOCK_FLAG, &ipipe_root_domain->flags))
-                s = __test_and_set_bit(IPIPE_STALL_FLAG,
-                                       &ipipe_root_cpudom_var(status));
-finalize:
+        /*
+         * If the interrupt preempted the head domain, then do not
+         * even try to walk the pipeline, unless an interrupt is
+         * pending for it.
+         */
+        if (test_bit(IPIPE_AHEAD_FLAG, &this_domain->flags) &&
+            ipipe_head_cpudom_var(irqpend_himask) == 0)
+                goto out;
 
         __ipipe_walk_pipeline(head);
-
+out:
         if (!s)
-                __clear_bit(IPIPE_STALL_FLAG,
-                            &ipipe_root_cpudom_var(status));
+                __clear_bit(IPIPE_STALL_FLAG, &p->status);
 }
 
 int __ipipe_check_root(void)
@@ -187,7 +166,7 @@ int __ipipe_check_root(void)
 
 void __ipipe_enable_irqdesc(struct ipipe_domain *ipd, unsigned irq)
 {
-        struct irq_desc *desc = irq_desc + irq;
+        struct irq_desc *desc = irq_to_desc(irq);
         int prio = desc->ic_prio;
 
         desc->depth = 0;
@@ -199,7 +178,7 @@ EXPORT_SYMBOL(__ipipe_enable_irqdesc);
 
 void __ipipe_disable_irqdesc(struct ipipe_domain *ipd, unsigned irq)
 {
-        struct irq_desc *desc = irq_desc + irq;
+        struct irq_desc *desc = irq_to_desc(irq);
         int prio = desc->ic_prio;
 
         if (ipd != &ipipe_root &&
@@ -236,15 +215,18 @@ int __ipipe_syscall_root(struct pt_regs *regs)
 {
         unsigned long flags;
 
-        /* We need to run the IRQ tail hook whenever we don't
+        /*
+         * We need to run the IRQ tail hook whenever we don't
          * propagate a syscall to higher domains, because we know that
          * important operations might be pending there (e.g. Xenomai
-         * deferred rescheduling). */
+         * deferred rescheduling).
+         */
 
-        if (!__ipipe_syscall_watched_p(current, regs->orig_p0)) {
+        if (regs->orig_p0 < NR_syscalls) {
                 void (*hook)(void) = (void (*)(void))__ipipe_irq_tail_hook;
                 hook();
-                return 0;
+                if ((current->flags & PF_EVNOTIFY) == 0)
+                        return 0;
         }
 
         /*
@@ -312,112 +294,46 @@ int ipipe_trigger_irq(unsigned irq)
 {
         unsigned long flags;
 
+#ifdef CONFIG_IPIPE_DEBUG
         if (irq >= IPIPE_NR_IRQS ||
             (ipipe_virtual_irq_p(irq)
              && !test_bit(irq - IPIPE_VIRQ_BASE, &__ipipe_virtual_irq_map)))
                 return -EINVAL;
+#endif
 
         local_irq_save_hw(flags);
-
         __ipipe_handle_irq(irq, NULL);
-
         local_irq_restore_hw(flags);
 
         return 1;
 }
 
-/* Move Linux IRQ to threads. */
-
-static int do_irqd(void *__desc)
+asmlinkage void __ipipe_sync_root(void)
 {
-        struct irq_desc *desc = __desc;
-        unsigned irq = desc - irq_desc;
-        int thrprio = desc->thr_prio;
-        int thrmask = 1 << thrprio;
-        int cpu = smp_processor_id();
-        cpumask_t cpumask;
-
-        sigfillset(&current->blocked);
-        current->flags |= PF_NOFREEZE;
-        cpumask = cpumask_of_cpu(cpu);
-        set_cpus_allowed(current, cpumask);
-        ipipe_setscheduler_root(current, SCHED_FIFO, 50 + thrprio);
-
-        while (!kthread_should_stop()) {
-                local_irq_disable();
-                if (!(desc->status & IRQ_SCHEDULED)) {
-                        set_current_state(TASK_INTERRUPTIBLE);
-resched:
-                        local_irq_enable();
-                        schedule();
-                        local_irq_disable();
-                }
-                __set_current_state(TASK_RUNNING);
-                /*
-                 * If higher priority interrupt servers are ready to
-                 * run, reschedule immediately. We need this for the
-                 * GPIO demux IRQ handler to unmask the interrupt line
-                 * _last_, after all GPIO IRQs have run.
-                 */
-                if (per_cpu(pending_irqthread_mask, cpu) & ~(thrmask|(thrmask-1)))
-                        goto resched;
-                if (--per_cpu(pending_irq_count[thrprio], cpu) == 0)
-                        per_cpu(pending_irqthread_mask, cpu) &= ~thrmask;
-                desc->status &= ~IRQ_SCHEDULED;
-                desc->thr_handler(irq, &__raw_get_cpu_var(__ipipe_tick_regs));
-                local_irq_enable();
-        }
-        __set_current_state(TASK_RUNNING);
-        return 0;
-}
+        unsigned long flags;
 
-static void kick_irqd(unsigned irq, void *cookie)
-{
-        struct irq_desc *desc = irq_desc + irq;
-        int thrprio = desc->thr_prio;
-        int thrmask = 1 << thrprio;
-        int cpu = smp_processor_id();
-
-        if (!(desc->status & IRQ_SCHEDULED)) {
-                desc->status |= IRQ_SCHEDULED;
-                per_cpu(pending_irqthread_mask, cpu) |= thrmask;
-                ++per_cpu(pending_irq_count[thrprio], cpu);
-                wake_up_process(desc->thread);
-        }
-}
+        BUG_ON(irqs_disabled());
 
-int ipipe_start_irq_thread(unsigned irq, struct irq_desc *desc)
-{
-        if (desc->thread || !create_irq_threads)
-                return 0;
-
-        desc->thread = kthread_create(do_irqd, desc, "IRQ %d", irq);
-        if (desc->thread == NULL) {
-                printk(KERN_ERR "irqd: could not create IRQ thread %d!\n", irq);
-                return -ENOMEM;
-        }
+        local_irq_save_hw(flags);
 
-        wake_up_process(desc->thread);
+        clear_thread_flag(TIF_IRQ_SYNC);
 
-        desc->thr_handler = ipipe_root_domain->irqs[irq].handler;
-        ipipe_root_domain->irqs[irq].handler = &kick_irqd;
+        if (ipipe_root_cpudom_var(irqpend_himask) != 0)
+                __ipipe_sync_pipeline(IPIPE_IRQMASK_ANY);
 
-        return 0;
+        local_irq_restore_hw(flags);
 }
 
-void __init ipipe_init_irq_threads(void)
+void ___ipipe_sync_pipeline(unsigned long syncmask)
 {
-        unsigned irq;
-        struct irq_desc *desc;
-
-        create_irq_threads = 1;
+        struct ipipe_domain *ipd = ipipe_current_domain;
 
-        for (irq = 0; irq < NR_IRQS; irq++) {
-                desc = irq_desc + irq;
-                if (desc->action != NULL ||
-                        (desc->status & IRQ_NOREQUEST) != 0)
-                        ipipe_start_irq_thread(irq, desc);
+        if (ipd == ipipe_root_domain) {
+                if (test_bit(IPIPE_SYNCDEFER_FLAG, &ipipe_root_cpudom_var(status)))
+                        return;
         }
+
+        __ipipe_sync_stage(syncmask);
 }
 
 EXPORT_SYMBOL(show_stack);
diff --git a/arch/blackfin/kernel/irqchip.c b/arch/blackfin/kernel/irqchip.c
index 75724eee6494..7fd126564846 100644
--- a/arch/blackfin/kernel/irqchip.c
+++ b/arch/blackfin/kernel/irqchip.c
@@ -144,11 +144,15 @@ asmlinkage void asm_do_IRQ(unsigned int irq, struct pt_regs *regs)
 #endif
         generic_handle_irq(irq);
 
-#ifndef CONFIG_IPIPE    /* Useless and bugous over the I-pipe: IRQs are threaded. */
-        /* If we're the only interrupt running (ignoring IRQ15 which is for
-           syscalls), lower our priority to IRQ14 so that softirqs run at
-           that level.  If there's another, lower-level interrupt, irq_exit
-           will defer softirqs to that.  */
+#ifndef CONFIG_IPIPE
+        /*
+         * If we're the only interrupt running (ignoring IRQ15 which
+         * is for syscalls), lower our priority to IRQ14 so that
+         * softirqs run at that level.  If there's another,
+         * lower-level interrupt, irq_exit will defer softirqs to
+         * that. If the interrupt pipeline is enabled, we are already
+         * running at IRQ14 priority, so we don't need this code.
+         */
         CSYNC();
         pending = bfin_read_IPEND() & ~0x8000;
         other_ints = pending & (pending - 1);
diff --git a/arch/blackfin/kernel/kgdb_test.c b/arch/blackfin/kernel/kgdb_test.c
index 3dba9c17304a..dbcf3e45cb0b 100644
--- a/arch/blackfin/kernel/kgdb_test.c
+++ b/arch/blackfin/kernel/kgdb_test.c
@@ -20,6 +20,7 @@
 static char cmdline[256];
 static unsigned long len;
 
+#ifndef CONFIG_SMP
 static int num1 __attribute__((l1_data));
 
 void kgdb_l1_test(void) __attribute__((l1_text));
@@ -32,6 +33,8 @@ void kgdb_l1_test(void)
         printk(KERN_ALERT "L1(after change) : data variable addr = 0x%p, data value is %d\n", &num1, num1);
         return ;
 }
+#endif
+
 #if L2_LENGTH
 
 static int num2 __attribute__((l2));
@@ -59,10 +62,12 @@ int kgdb_test(char *name, int len, int count, int z)
 static int test_proc_output(char *buf)
 {
         kgdb_test("hello world!", 12, 0x55, 0x10);
+#ifndef CONFIG_SMP
         kgdb_l1_test();
-        #if L2_LENGTH
+#endif
+#if L2_LENGTH
         kgdb_l2_test();
-        #endif
+#endif
 
         return 0;
 }
diff --git a/arch/blackfin/kernel/ptrace.c b/arch/blackfin/kernel/ptrace.c
index 594e325b40e4..d76618db50df 100644
--- a/arch/blackfin/kernel/ptrace.c
+++ b/arch/blackfin/kernel/ptrace.c
@@ -45,6 +45,7 @@
 #include <asm/asm-offsets.h>
 #include <asm/dma.h>
 #include <asm/fixed_code.h>
+#include <asm/cacheflush.h>
 #include <asm/mem_map.h>
 
 #define TEXT_OFFSET 0
@@ -240,7 +241,7 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 
                         } else if (addr >= FIXED_CODE_START
                             && addr + sizeof(tmp) <= FIXED_CODE_END) {
-                                memcpy(&tmp, (const void *)(addr), sizeof(tmp));
+                                copy_from_user_page(0, 0, 0, &tmp, (const void *)(addr), sizeof(tmp));
                                 copied = sizeof(tmp);
 
                         } else
@@ -320,7 +321,7 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 
                         } else if (addr >= FIXED_CODE_START
                             && addr + sizeof(data) <= FIXED_CODE_END) {
-                                memcpy((void *)(addr), &data, sizeof(data));
+                                copy_to_user_page(0, 0, 0, (void *)(addr), &data, sizeof(data));
                                 copied = sizeof(data);
 
                         } else
diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c
index e5c116230800..a58687bdee6a 100644
--- a/arch/blackfin/kernel/setup.c
+++ b/arch/blackfin/kernel/setup.c
@@ -889,6 +889,10 @@ void __init setup_arch(char **cmdline_p)
                                CPU, bfin_revid());
         }
 
+        /* We can't run on BF548-0.1 due to ANOMALY 05000448 */
+        if (bfin_cpuid() == 0x27de && bfin_revid() == 1)
+                panic("You can't run on this processor due to 05000448\n");
+
         printk(KERN_INFO "Blackfin Linux support by http://blackfin.uclinux.org/\n");
 
         printk(KERN_INFO "Processor Speed: %lu MHz core clock and %lu MHz System Clock\n",
@@ -1141,12 +1145,12 @@ static int show_cpuinfo(struct seq_file *m, void *v)
                 icache_size = 0;
 
         seq_printf(m, "cache size\t: %d KB(L1 icache) "
-                "%d KB(L1 dcache-%s) %d KB(L2 cache)\n",
+                "%d KB(L1 dcache%s) %d KB(L2 cache)\n",
                 icache_size, dcache_size,
 #if defined CONFIG_BFIN_WB
-                "wb"
+                "-wb"
 #elif defined CONFIG_BFIN_WT
-                "wt"
+                "-wt"
 #endif
                 "", 0);
 
diff --git a/arch/blackfin/kernel/time.c b/arch/blackfin/kernel/time.c
index 172b4c588467..1bbacfbd4c5d 100644
--- a/arch/blackfin/kernel/time.c
+++ b/arch/blackfin/kernel/time.c
@@ -134,7 +134,10 @@ irqreturn_t timer_interrupt(int irq, void *dummy)
 
         write_seqlock(&xtime_lock);
 #if defined(CONFIG_TICK_SOURCE_SYSTMR0) && !defined(CONFIG_IPIPE)
-/* FIXME: Here TIMIL0 is not set when IPIPE enabled, why? */
+        /*
+         * TIMIL0 is latched in __ipipe_grab_irq() when the I-Pipe is
+         * enabled.
+         */
         if (get_gptimer_status(0) & TIMER_STATUS_TIMIL0) {
 #endif
                 do_timer(1);
diff --git a/arch/blackfin/mach-bf518/boards/ezbrd.c b/arch/blackfin/mach-bf518/boards/ezbrd.c
index 0e175342112e..41f2eacfef20 100644
--- a/arch/blackfin/mach-bf518/boards/ezbrd.c
+++ b/arch/blackfin/mach-bf518/boards/ezbrd.c
@@ -113,7 +113,6 @@ static struct platform_device bfin_mac_device = {
         .name = "bfin_mac",
         .dev.platform_data = &bfin_mii_bus,
 };
-#endif
 
 #if defined(CONFIG_NET_DSA_KSZ8893M) || defined(CONFIG_NET_DSA_KSZ8893M_MODULE)
 static struct dsa_platform_data ksz8893m_switch_data = {
@@ -132,6 +131,7 @@ static struct platform_device ksz8893m_switch_device = {
         .dev.platform_data = &ksz8893m_switch_data,
 };
 #endif
+#endif
 
 #if defined(CONFIG_MTD_M25P80) \
         || defined(CONFIG_MTD_M25P80_MODULE)
@@ -171,6 +171,7 @@ static struct bfin5xx_spi_chip spi_adc_chip_info = {
 };
 #endif
 
+#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
 #if defined(CONFIG_NET_DSA_KSZ8893M) \
         || defined(CONFIG_NET_DSA_KSZ8893M_MODULE)
 /* SPI SWITCH CHIP */
@@ -179,10 +180,11 @@ static struct bfin5xx_spi_chip spi_switch_info = {
         .bits_per_word = 8,
 };
 #endif
+#endif
 
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-static struct bfin5xx_spi_chip spi_mmc_chip_info = {
-        .enable_dma = 1,
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+static struct bfin5xx_spi_chip mmc_spi_chip_info = {
+        .enable_dma = 0,
         .bits_per_word = 8,
 };
 #endif
@@ -259,6 +261,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
         },
 #endif
 
+#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
 #if defined(CONFIG_NET_DSA_KSZ8893M) \
         || defined(CONFIG_NET_DSA_KSZ8893M_MODULE)
         {
@@ -271,24 +274,15 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
                 .mode = SPI_MODE_3,
         },
 #endif
+#endif
 
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
         {
-                .modalias = "spi_mmc_dummy",
+                .modalias = "mmc_spi",
                 .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
                 .bus_num = 0,
-                .chip_select = 0,
-                .platform_data = NULL,
-                .controller_data = &spi_mmc_chip_info,
-                .mode = SPI_MODE_3,
-        },
-        {
-                .modalias = "spi_mmc",
-                .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
-                .bus_num = 0,
-                .chip_select = CONFIG_SPI_MMC_CS_CHAN,
-                .platform_data = NULL,
-                .controller_data = &spi_mmc_chip_info,
+                .chip_select = 5,
+                .controller_data = &mmc_spi_chip_info,
                 .mode = SPI_MODE_3,
         },
 #endif
@@ -630,11 +624,10 @@ static struct platform_device *stamp_devices[] __initdata = {
 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
         &bfin_mii_bus,
         &bfin_mac_device,
-#endif
-
 #if defined(CONFIG_NET_DSA_KSZ8893M) || defined(CONFIG_NET_DSA_KSZ8893M_MODULE)
         &ksz8893m_switch_device,
 #endif
+#endif
 
 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
         &bfin_spi0_device,
diff --git a/arch/blackfin/mach-bf518/include/mach/anomaly.h b/arch/blackfin/mach-bf518/include/mach/anomaly.h
index e5b4bef0edae..c847bb101076 100644
--- a/arch/blackfin/mach-bf518/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf518/include/mach/anomaly.h
@@ -2,12 +2,12 @@
  * File: include/asm-blackfin/mach-bf518/anomaly.h
  * Bugs: Enter bugs at http://blackfin.uclinux.org/
  *
- * Copyright (C) 2004-2008 Analog Devices Inc.
+ * Copyright (C) 2004-2009 Analog Devices Inc.
  * Licensed under the GPL-2 or later.
  */
 
 /* This file shoule be up to date with:
- *  - ????
+ *  - Revision B, 02/03/2009; ADSP-BF512/BF514/BF516/BF518 Blackfin Processor Anomaly List
  */
 
 #ifndef _MACH_ANOMALY_H_
@@ -19,6 +19,8 @@
 #define ANOMALY_05000122 (1)
 /* False Hardware Error from an Access in the Shadow of a Conditional Branch */
 #define ANOMALY_05000245 (1)
+/* Incorrect Timer Pulse Width in Single-Shot PWM_OUT Mode with External Clock */
+#define ANOMALY_05000254 (1)
 /* Sensitivity To Noise with Slow Input Edge Rates on External SPORT TX and RX Clocks */
 #define ANOMALY_05000265 (1)
 /* False Hardware Errors Caused by Fetches at the Boundary of Reserved Memory */
@@ -53,6 +55,12 @@
 #define ANOMALY_05000443 (1)
 /* Incorrect L1 Instruction Bank B Memory Map Location */
 #define ANOMALY_05000444 (1)
+/* Incorrect Default Hysteresis Setting for RESET, NMI, and BMODE Signals */
+#define ANOMALY_05000452 (1)
+/* PWM_TRIPB Signal Not Available on PG10 */
+#define ANOMALY_05000453 (1)
+/* PPI_FS3 is Driven One Half Cycle Later Than PPI Data */
+#define ANOMALY_05000455 (1)
 
 /* Anomalies that don't exist on this proc */
 #define ANOMALY_05000125 (0)
@@ -65,15 +73,20 @@
 #define ANOMALY_05000263 (0)
 #define ANOMALY_05000266 (0)
 #define ANOMALY_05000273 (0)
+#define ANOMALY_05000278 (0)
 #define ANOMALY_05000285 (0)
+#define ANOMALY_05000305 (0)
 #define ANOMALY_05000307 (0)
 #define ANOMALY_05000311 (0)
 #define ANOMALY_05000312 (0)
 #define ANOMALY_05000323 (0)
 #define ANOMALY_05000353 (0)
 #define ANOMALY_05000363 (0)
+#define ANOMALY_05000380 (0)
 #define ANOMALY_05000386 (0)
 #define ANOMALY_05000412 (0)
 #define ANOMALY_05000432 (0)
+#define ANOMALY_05000447 (0)
+#define ANOMALY_05000448 (0)
 
 #endif
diff --git a/arch/blackfin/mach-bf518/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf518/include/mach/bfin_serial_5xx.h
index b50a63b975a2..e21c1c3e4ec7 100644
--- a/arch/blackfin/mach-bf518/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf518/include/mach/bfin_serial_5xx.h
@@ -144,7 +144,7 @@ struct bfin_serial_res bfin_serial_resource[] = {
          CH_UART0_TX,
          CH_UART0_RX,
 #endif
-#ifdef CONFIG_BFIN_UART0_CTSRTS
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
          CONFIG_UART0_CTS_PIN,
          CONFIG_UART0_RTS_PIN,
 #endif
@@ -158,7 +158,7 @@ struct bfin_serial_res bfin_serial_resource[] = {
          CH_UART1_TX,
          CH_UART1_RX,
 #endif
-#ifdef CONFIG_BFIN_UART1_CTSRTS
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
          CONFIG_UART1_CTS_PIN,
          CONFIG_UART1_RTS_PIN,
 #endif
diff --git a/arch/blackfin/mach-bf527/boards/cm_bf527.c b/arch/blackfin/mach-bf527/boards/cm_bf527.c
index 856c097b5317..48e69eecdba4 100644
--- a/arch/blackfin/mach-bf527/boards/cm_bf527.c
+++ b/arch/blackfin/mach-bf527/boards/cm_bf527.c
@@ -487,9 +487,9 @@ static struct bfin5xx_spi_chip ad9960_spi_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-static struct bfin5xx_spi_chip spi_mmc_chip_info = {
-        .enable_dma = 1,
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+static struct bfin5xx_spi_chip  mmc_spi_chip_info = {
+        .enable_dma = 0,
         .bits_per_word = 8,
 };
 #endif
@@ -585,23 +585,13 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
                 .controller_data = &ad9960_spi_chip_info,
         },
 #endif
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
         {
-                .modalias = "spi_mmc_dummy",
-                .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
-                .bus_num = 0,
-                .chip_select = 0,
-                .platform_data = NULL,
-                .controller_data = &spi_mmc_chip_info,
-                .mode = SPI_MODE_3,
-        },
-        {
-                .modalias = "spi_mmc",
-                .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
+                .modalias = "mmc_spi",
+                .max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
                 .bus_num = 0,
-                .chip_select = CONFIG_SPI_MMC_CS_CHAN,
-                .platform_data = NULL,
-                .controller_data = &spi_mmc_chip_info,
+                .chip_select = 5,
+                .controller_data = &mmc_spi_chip_info,
                 .mode = SPI_MODE_3,
         },
 #endif
diff --git a/arch/blackfin/mach-bf527/boards/ezbrd.c b/arch/blackfin/mach-bf527/boards/ezbrd.c
index 83606fcdde27..7fe480e4ebe8 100644
--- a/arch/blackfin/mach-bf527/boards/ezbrd.c
+++ b/arch/blackfin/mach-bf527/boards/ezbrd.c
@@ -256,9 +256,9 @@ static struct bfin5xx_spi_chip spi_adc_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-static struct bfin5xx_spi_chip spi_mmc_chip_info = {
-        .enable_dma = 1,
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+static struct bfin5xx_spi_chip mmc_spi_chip_info = {
+        .enable_dma = 0,
         .bits_per_word = 8,
 };
 #endif
@@ -366,23 +366,13 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
         },
 #endif
 
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
         {
-                .modalias = "spi_mmc_dummy",
+                .modalias = "mmc_spi",
                 .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
                 .bus_num = 0,
-                .chip_select = 0,
-                .platform_data = NULL,
-                .controller_data = &spi_mmc_chip_info,
-                .mode = SPI_MODE_3,
-        },
-        {
-                .modalias = "spi_mmc",
-                .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
-                .bus_num = 0,
-                .chip_select = CONFIG_SPI_MMC_CS_CHAN,
-                .platform_data = NULL,
-                .controller_data = &spi_mmc_chip_info,
+                .chip_select = 5,
+                .controller_data = &mmc_spi_chip_info,
                 .mode = SPI_MODE_3,
         },
 #endif
diff --git a/arch/blackfin/mach-bf527/include/mach/anomaly.h b/arch/blackfin/mach-bf527/include/mach/anomaly.h
index 035e8d835058..df6808d8a6ef 100644
--- a/arch/blackfin/mach-bf527/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf527/include/mach/anomaly.h
@@ -2,7 +2,7 @@
  * File: include/asm-blackfin/mach-bf527/anomaly.h
  * Bugs: Enter bugs at http://blackfin.uclinux.org/
  *
- * Copyright (C) 2004-2008 Analog Devices Inc.
+ * Copyright (C) 2004-2009 Analog Devices Inc.
  * Licensed under the GPL-2 or later.
  */
 
@@ -167,12 +167,16 @@
 #define ANOMALY_05000263 (0)
 #define ANOMALY_05000266 (0)
 #define ANOMALY_05000273 (0)
+#define ANOMALY_05000278 (0)
 #define ANOMALY_05000285 (0)
+#define ANOMALY_05000305 (0)
 #define ANOMALY_05000307 (0)
 #define ANOMALY_05000311 (0)
 #define ANOMALY_05000312 (0)
 #define ANOMALY_05000323 (0)
 #define ANOMALY_05000363 (0)
 #define ANOMALY_05000412 (0)
+#define ANOMALY_05000447 (0)
+#define ANOMALY_05000448 (0)
 
 #endif
diff --git a/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h
index 75722d6008b0..e8c41fd842b5 100644
--- a/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h
@@ -144,7 +144,7 @@ struct bfin_serial_res bfin_serial_resource[] = {
          CH_UART0_TX,
          CH_UART0_RX,
 #endif
-#ifdef CONFIG_BFIN_UART0_CTSRTS
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
          CONFIG_UART0_CTS_PIN,
          CONFIG_UART0_RTS_PIN,
 #endif
@@ -158,7 +158,7 @@ struct bfin_serial_res bfin_serial_resource[] = {
          CH_UART1_TX,
          CH_UART1_RX,
 #endif
-#ifdef CONFIG_BFIN_UART1_CTSRTS
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
          CONFIG_UART1_CTS_PIN,
          CONFIG_UART1_RTS_PIN,
 #endif
diff --git a/arch/blackfin/mach-bf533/boards/Kconfig b/arch/blackfin/mach-bf533/boards/Kconfig
index 308c98dc5aba..8d8b3e7321e6 100644
--- a/arch/blackfin/mach-bf533/boards/Kconfig
+++ b/arch/blackfin/mach-bf533/boards/Kconfig
@@ -38,9 +38,4 @@ config BFIN532_IP0X
         help
           Core support for IP04/IP04 open hardware IP-PBX.
 
-config GENERIC_BF533_BOARD
-        bool "Generic"
-        help
-          Generic or Custom board support.
-
 endchoice
diff --git a/arch/blackfin/mach-bf533/boards/Makefile b/arch/blackfin/mach-bf533/boards/Makefile
index 9afbe72b484f..ff1e832f80d2 100644
--- a/arch/blackfin/mach-bf533/boards/Makefile
+++ b/arch/blackfin/mach-bf533/boards/Makefile
@@ -2,7 +2,6 @@
 # arch/blackfin/mach-bf533/boards/Makefile
 #
 
-obj-$(CONFIG_GENERIC_BF533_BOARD)      += generic_board.o
 obj-$(CONFIG_BFIN533_STAMP)            += stamp.o
 obj-$(CONFIG_BFIN532_IP0X)             += ip0x.o
 obj-$(CONFIG_BFIN533_EZKIT)            += ezkit.o
diff --git a/arch/blackfin/mach-bf533/boards/blackstamp.c b/arch/blackfin/mach-bf533/boards/blackstamp.c
index 015c18f85e7f..0765872a8ada 100644
--- a/arch/blackfin/mach-bf533/boards/blackstamp.c
+++ b/arch/blackfin/mach-bf533/boards/blackstamp.c
@@ -101,9 +101,9 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-static struct bfin5xx_spi_chip spi_mmc_chip_info = {
-        .enable_dma = 1,
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+static struct bfin5xx_spi_chip mmc_spi_chip_info = {
+        .enable_dma = 0,
         .bits_per_word = 8,
 };
 #endif
@@ -129,23 +129,13 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
         },
 #endif
 
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-        {
-                .modalias = "spi_mmc_dummy",
-                .max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
-                .bus_num = 0,
-                .chip_select = 0,
-                .platform_data = NULL,
-                .controller_data = &spi_mmc_chip_info,
-                .mode = SPI_MODE_3,
-        },
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
         {
-                .modalias = "spi_mmc",
+                .modalias = "mmc_spi",
                 .max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
                 .bus_num = 0,
-                .chip_select = CONFIG_SPI_MMC_CS_CHAN,
-                .platform_data = NULL,
-                .controller_data = &spi_mmc_chip_info,
+                .chip_select = 5,
+                .controller_data = &mmc_spi_chip_info,
                 .mode = SPI_MODE_3,
         },
 #endif
diff --git a/arch/blackfin/mach-bf533/boards/cm_bf533.c b/arch/blackfin/mach-bf533/boards/cm_bf533.c
index e7061c7e8c42..e8974878d8c2 100644
--- a/arch/blackfin/mach-bf533/boards/cm_bf533.c
+++ b/arch/blackfin/mach-bf533/boards/cm_bf533.c
@@ -96,9 +96,9 @@ static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-static struct bfin5xx_spi_chip spi_mmc_chip_info = {
-        .enable_dma = 1,
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+static struct bfin5xx_spi_chip mmc_spi_chip_info = {
+        .enable_dma = 0,
         .bits_per_word = 8,
 };
 #endif
@@ -138,23 +138,13 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
         },
 #endif
 
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-        {
-                .modalias = "spi_mmc_dummy",
-                .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
-                .bus_num = 0,
-                .chip_select = 0,
-                .platform_data = NULL,
-                .controller_data = &spi_mmc_chip_info,
-                .mode = SPI_MODE_3,
-        },
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
         {
-                .modalias = "spi_mmc",
+                .modalias = "mmc_spi",
                 .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
                 .bus_num = 0,
-                .chip_select = CONFIG_SPI_MMC_CS_CHAN,
-                .platform_data = NULL,
-                .controller_data = &spi_mmc_chip_info,
+                .chip_select = 5,
+                .controller_data = &mmc_spi_chip_info,
                 .mode = SPI_MODE_3,
         },
 #endif
diff --git a/arch/blackfin/mach-bf533/boards/generic_board.c b/arch/blackfin/mach-bf533/boards/generic_board.c
deleted file mode 100644
index 986eeec53b1f..000000000000
--- a/arch/blackfin/mach-bf533/boards/generic_board.c
+++ /dev/null
@@ -1,126 +0,0 @@
-/*
- * File:         arch/blackfin/mach-bf533/generic_board.c
- * Based on:     arch/blackfin/mach-bf533/ezkit.c
- * Author:       Aidan Williams <aidan@nicta.com.au>
- *
- * Created:      2005
- * Description:
- *
- * Modified:
- *               Copyright 2005 National ICT Australia (NICTA)
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <linux/irq.h>
-
-/*
- * Name the Board for the /proc/cpuinfo
- */
-const char bfin_board_name[] = "UNKNOWN BOARD";
-
-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
-static struct platform_device rtc_device = {
-        .name = "rtc-bfin",
-        .id   = -1,
-};
-#endif
-
-/*
- *  Driver needs to know address, irq and flag pin.
- */
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
-static struct resource smc91x_resources[] = {
-        {
-                .start = 0x20300300,
-                .end = 0x20300300 + 16,
-                .flags = IORESOURCE_MEM,
-        }, {
-                .start = IRQ_PROG_INTB,
-                .end = IRQ_PROG_INTB,
-                .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
-        }, {
-                .start = IRQ_PF7,
-                .end = IRQ_PF7,
-                .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
-        },
-};
-
-static struct platform_device smc91x_device = {
-        .name = "smc91x",
-        .id = 0,
-        .num_resources = ARRAY_SIZE(smc91x_resources),
-        .resource = smc91x_resources,
-};
-#endif
-
-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
-#ifdef CONFIG_BFIN_SIR0
-static struct resource bfin_sir0_resources[] = {
-        {
-                .start = 0xFFC00400,
-                .end = 0xFFC004FF,
-                .flags = IORESOURCE_MEM,
-        },
-        {
-                .start = IRQ_UART0_RX,
-                .end = IRQ_UART0_RX+1,
-                .flags = IORESOURCE_IRQ,
-        },
-        {
-                .start = CH_UART0_RX,
-                .end = CH_UART0_RX+1,
-                .flags = IORESOURCE_DMA,
-        },
-};
-
-static struct platform_device bfin_sir0_device = {
-        .name = "bfin_sir",
-        .id = 0,
-        .num_resources = ARRAY_SIZE(bfin_sir0_resources),
-        .resource = bfin_sir0_resources,
-};
-#endif
-#endif
-
-static struct platform_device *generic_board_devices[] __initdata = {
-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
-        &rtc_device,
-#endif
-
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
-        &smc91x_device,
-#endif
-
-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
-#ifdef CONFIG_BFIN_SIR0
-        &bfin_sir0_device,
-#endif
-#endif
-};
-
-static int __init generic_board_init(void)
-{
-        printk(KERN_INFO "%s(): registering device resources\n", __func__);
-        return platform_add_devices(generic_board_devices, ARRAY_SIZE(generic_board_devices));
-}
-
-arch_initcall(generic_board_init);
diff --git a/arch/blackfin/mach-bf533/boards/ip0x.c b/arch/blackfin/mach-bf533/boards/ip0x.c
index e30b1b7d1442..f19b63378b12 100644
--- a/arch/blackfin/mach-bf533/boards/ip0x.c
+++ b/arch/blackfin/mach-bf533/boards/ip0x.c
@@ -127,8 +127,8 @@ static struct platform_device dm9000_device2 = {
 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
 /* all SPI peripherals info goes here */
 
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-static struct bfin5xx_spi_chip spi_mmc_chip_info = {
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+static struct bfin5xx_spi_chip mmc_spi_chip_info = {
 /*
  * CPOL (Clock Polarity)
  *  0 - Active high SCK
@@ -152,14 +152,13 @@ static struct bfin5xx_spi_chip spi_mmc_chip_info = {
 /* Notice: for blackfin, the speed_hz is the value of register
  * SPI_BAUD, not the real baudrate */
 static struct spi_board_info bfin_spi_board_info[] __initdata = {
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
         {
-                .modalias = "spi_mmc",
+                .modalias = "mmc_spi",
                 .max_speed_hz = 2,
                 .bus_num = 1,
-                .chip_select = CONFIG_SPI_MMC_CS_CHAN,
-                .platform_data = NULL,
-                .controller_data = &spi_mmc_chip_info,
+                .chip_select = 5,
+                .controller_data = &mmc_spi_chip_info,
         },
 #endif
 };
diff --git a/arch/blackfin/mach-bf533/include/mach/anomaly.h b/arch/blackfin/mach-bf533/include/mach/anomaly.h
index 0d3a03429fb9..1cf893e2e55b 100644
--- a/arch/blackfin/mach-bf533/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf533/include/mach/anomaly.h
@@ -2,7 +2,7 @@
  * File: include/asm-blackfin/mach-bf533/anomaly.h
  * Bugs: Enter bugs at http://blackfin.uclinux.org/
  *
- * Copyright (C) 2004-2008 Analog Devices Inc.
+ * Copyright (C) 2004-2009 Analog Devices Inc.
  * Licensed under the GPL-2 or later.
  */
 
@@ -160,7 +160,7 @@
 #define ANOMALY_05000301 (__SILICON_REVISION__ < 6)
 /* SSYNCs After Writes To DMA MMR Registers May Not Be Handled Correctly */
 #define ANOMALY_05000302 (__SILICON_REVISION__ < 5)
-/* New Feature: Additional Hysteresis on SPORT Input Pins (Not Available On Older Silicon) */
+/* SPORT_HYS Bit in PLL_CTL Register Is Not Functional */
 #define ANOMALY_05000305 (__SILICON_REVISION__ < 5)
 /* New Feature: Additional PPI Frame Sync Sampling Options (Not Available On Older Silicon) */
 #define ANOMALY_05000306 (__SILICON_REVISION__ < 5)
@@ -278,9 +278,12 @@
 #define ANOMALY_05000266 (0)
 #define ANOMALY_05000323 (0)
 #define ANOMALY_05000353 (1)
+#define ANOMALY_05000380 (0)
 #define ANOMALY_05000386 (1)
 #define ANOMALY_05000412 (0)
 #define ANOMALY_05000432 (0)
 #define ANOMALY_05000435 (0)
+#define ANOMALY_05000447 (0)
+#define ANOMALY_05000448 (0)
 
 #endif
diff --git a/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h
index f3d9e495230c..5f517f53b0fd 100644
--- a/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h
@@ -134,7 +134,7 @@ struct bfin_serial_res bfin_serial_resource[] = {
         CH_UART_TX,
         CH_UART_RX,
 #endif
-#ifdef CONFIG_BFIN_UART0_CTSRTS
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
         CONFIG_UART0_CTS_PIN,
         CONFIG_UART0_RTS_PIN,
 #endif
diff --git a/arch/blackfin/mach-bf537/boards/Kconfig b/arch/blackfin/mach-bf537/boards/Kconfig
index 42a57b0acb29..77c59da87e85 100644
--- a/arch/blackfin/mach-bf537/boards/Kconfig
+++ b/arch/blackfin/mach-bf537/boards/Kconfig
@@ -33,9 +33,4 @@ config CAMSIG_MINOTAUR
         help
           Board supply package for CSP Minotaur
 
-config GENERIC_BF537_BOARD
-        bool "Generic"
-        help
-          Generic or Custom board support.
-
 endchoice
diff --git a/arch/blackfin/mach-bf537/boards/Makefile b/arch/blackfin/mach-bf537/boards/Makefile
index 7168cc14afd8..68b98a7af6a6 100644
--- a/arch/blackfin/mach-bf537/boards/Makefile
+++ b/arch/blackfin/mach-bf537/boards/Makefile
@@ -2,7 +2,6 @@
 # arch/blackfin/mach-bf537/boards/Makefile
 #
 
-obj-$(CONFIG_GENERIC_BF537_BOARD)      += generic_board.o
 obj-$(CONFIG_BFIN537_STAMP)            += stamp.o
 obj-$(CONFIG_BFIN537_BLUETECHNIX_CM)   += cm_bf537.o
 obj-$(CONFIG_BFIN537_BLUETECHNIX_TCM)  += tcm_bf537.o
diff --git a/arch/blackfin/mach-bf537/boards/cm_bf537.c b/arch/blackfin/mach-bf537/boards/cm_bf537.c
index 9cd8fb2a30d3..41c75b9bfac0 100644
--- a/arch/blackfin/mach-bf537/boards/cm_bf537.c
+++ b/arch/blackfin/mach-bf537/boards/cm_bf537.c
@@ -108,9 +108,9 @@ static struct bfin5xx_spi_chip ad9960_spi_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-static struct bfin5xx_spi_chip spi_mmc_chip_info = {
-        .enable_dma = 1,
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+static struct bfin5xx_spi_chip  mmc_spi_chip_info = {
+        .enable_dma = 0,
         .bits_per_word = 8,
 };
 #endif
@@ -160,23 +160,13 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
         },
 #endif
 
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-        {
-                .modalias = "spi_mmc_dummy",
-                .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
-                .bus_num = 0,
-                .chip_select = 7,
-                .platform_data = NULL,
-                .controller_data = &spi_mmc_chip_info,
-                .mode = SPI_MODE_3,
-        },
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
         {
-                .modalias = "spi_mmc",
-                .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
+                .modalias = "mmc_spi",
+                .max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
                 .bus_num = 0,
-                .chip_select = CONFIG_SPI_MMC_CS_CHAN,
-                .platform_data = NULL,
-                .controller_data = &spi_mmc_chip_info,
+                .chip_select = 1,
+                .controller_data = &mmc_spi_chip_info,
                 .mode = SPI_MODE_3,
         },
 #endif
diff --git a/arch/blackfin/mach-bf537/boards/generic_board.c b/arch/blackfin/mach-bf537/boards/generic_board.c
deleted file mode 100644
index da710fdc4569..000000000000
--- a/arch/blackfin/mach-bf537/boards/generic_board.c
+++ /dev/null
@@ -1,745 +0,0 @@
-/*
- * File:         arch/blackfin/mach-bf537/boards/generic_board.c
- * Based on:     arch/blackfin/mach-bf533/boards/ezkit.c
- * Author:       Aidan Williams <aidan@nicta.com.au>
- *
- * Created:
- * Description:
- *
- * Modified:
- *               Copyright 2005 National ICT Australia (NICTA)
- *               Copyright 2004-2008 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-
-#include <linux/device.h>
-#include <linux/etherdevice.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
-#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
-#include <linux/usb/isp1362.h>
-#endif
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <linux/usb/sl811.h>
-#include <asm/dma.h>
-#include <asm/bfin5xx_spi.h>
-#include <asm/reboot.h>
-#include <asm/portmux.h>
-#include <linux/spi/ad7877.h>
-
-/*
- * Name the Board for the /proc/cpuinfo
- */
-const char bfin_board_name[] = "UNKNOWN BOARD";
-
-/*
- *  Driver needs to know address, irq and flag pin.
- */
-
-#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
-#include <linux/usb/isp1760.h>
-static struct resource bfin_isp1760_resources[] = {
-        [0] = {
-                .start  = 0x203C0000,
-                .end    = 0x203C0000 + 0x000fffff,
-                .flags  = IORESOURCE_MEM,
-        },
-        [1] = {
-                .start  = IRQ_PF7,
-                .end    = IRQ_PF7,
-                .flags  = IORESOURCE_IRQ,
-        },
-};
-
-static struct isp1760_platform_data isp1760_priv = {
-        .is_isp1761 = 0,
-        .port1_disable = 0,
-        .bus_width_16 = 1,
-        .port1_otg = 0,
-        .analog_oc = 0,
-        .dack_polarity_high = 0,
-        .dreq_polarity_high = 0,
-};
-
-static struct platform_device bfin_isp1760_device = {
-        .name           = "isp1760-hcd",
-        .id             = 0,
-        .dev = {
-                .platform_data = &isp1760_priv,
-        },
-        .num_resources  = ARRAY_SIZE(bfin_isp1760_resources),
-        .resource       = bfin_isp1760_resources,
-};
-#endif
-
-#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
-static struct resource bfin_pcmcia_cf_resources[] = {
-        {
-                .start = 0x20310000, /* IO PORT */
-                .end = 0x20312000,
-                .flags = IORESOURCE_MEM,
-        }, {
-                .start = 0x20311000, /* Attribute Memory */
-                .end = 0x20311FFF,
-                .flags = IORESOURCE_MEM,
-        }, {
-                .start = IRQ_PF4,
-                .end = IRQ_PF4,
-                .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
-        }, {
-                .start = 6, /* Card Detect PF6 */
-                .end = 6,
-                .flags = IORESOURCE_IRQ,
-        },
-};
-
-static struct platform_device bfin_pcmcia_cf_device = {
-        .name = "bfin_cf_pcmcia",
-        .id = -1,
-        .num_resources = ARRAY_SIZE(bfin_pcmcia_cf_resources),
-        .resource = bfin_pcmcia_cf_resources,
-};
-#endif
-
-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
-static struct platform_device rtc_device = {
-        .name = "rtc-bfin",
-        .id   = -1,
-};
-#endif
-
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
-static struct resource smc91x_resources[] = {
-        {
-                .name = "smc91x-regs",
-                .start = 0x20300300,
-                .end = 0x20300300 + 16,
-                .flags = IORESOURCE_MEM,
-        }, {
-
-                .start = IRQ_PF7,
-                .end = IRQ_PF7,
-                .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
-        },
-};
-static struct platform_device smc91x_device = {
-        .name = "smc91x",
-        .id = 0,
-        .num_resources = ARRAY_SIZE(smc91x_resources),
-        .resource = smc91x_resources,
-};
-#endif
-
-#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
-static struct resource dm9000_resources[] = {
-        [0] = {
-                .start  = 0x203FB800,
-                .end    = 0x203FB800 + 1,
-                .flags  = IORESOURCE_MEM,
-        },
-        [1] = {
-                .start  = 0x203FB800 + 4,
-                .end    = 0x203FB800 + 5,
-                .flags  = IORESOURCE_MEM,
-        },
-        [2] = {
-                .start  = IRQ_PF9,
-                .end    = IRQ_PF9,
-                .flags  = (IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE),
-        },
-};
-
-static struct platform_device dm9000_device = {
-        .name           = "dm9000",
-        .id             = -1,
-        .num_resources  = ARRAY_SIZE(dm9000_resources),
-        .resource       = dm9000_resources,
-};
-#endif
-
-#if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE)
-static struct resource sl811_hcd_resources[] = {
-        {
-                .start = 0x20340000,
-                .end = 0x20340000,
-                .flags = IORESOURCE_MEM,
-        }, {
-                .start = 0x20340004,
-                .end = 0x20340004,
-                .flags = IORESOURCE_MEM,
-        }, {
-                .start = CONFIG_USB_SL811_BFIN_IRQ,
-                .end = CONFIG_USB_SL811_BFIN_IRQ,
-                .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
-        },
-};
-
-#if defined(CONFIG_USB_SL811_BFIN_USE_VBUS)
-void sl811_port_power(struct device *dev, int is_on)
-{
-        gpio_request(CONFIG_USB_SL811_BFIN_GPIO_VBUS, "usb:SL811_VBUS");
-        gpio_direction_output(CONFIG_USB_SL811_BFIN_GPIO_VBUS, is_on);
-
-}
-#endif
-
-static struct sl811_platform_data sl811_priv = {
-        .potpg = 10,
-        .power = 250,       /* == 500mA */
-#if defined(CONFIG_USB_SL811_BFIN_USE_VBUS)
-        .port_power = &sl811_port_power,
-#endif
-};
-
-static struct platform_device sl811_hcd_device = {
-        .name = "sl811-hcd",
-        .id = 0,
-        .dev = {
-                .platform_data = &sl811_priv,
-        },
-        .num_resources = ARRAY_SIZE(sl811_hcd_resources),
-        .resource = sl811_hcd_resources,
-};
-#endif
-
-#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
-static struct resource isp1362_hcd_resources[] = {
-        {
-                .start = 0x20360000,
-                .end = 0x20360000,
-                .flags = IORESOURCE_MEM,
-        }, {
-                .start = 0x20360004,
-                .end = 0x20360004,
-                .flags = IORESOURCE_MEM,
-        }, {
-                .start = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ,
-                .end = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ,
-                .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
-        },
-};
-
-static struct isp1362_platform_data isp1362_priv = {
-        .sel15Kres = 1,
-        .clknotstop = 0,
-        .oc_enable = 0,
-        .int_act_high = 0,
-        .int_edge_triggered = 0,
-        .remote_wakeup_connected = 0,
-        .no_power_switching = 1,
-        .power_switching_mode = 0,
-};
-
-static struct platform_device isp1362_hcd_device = {
-        .name = "isp1362-hcd",
-        .id = 0,
-        .dev = {
-                .platform_data = &isp1362_priv,
-        },
-        .num_resources = ARRAY_SIZE(isp1362_hcd_resources),
-        .resource = isp1362_hcd_resources,
-};
-#endif
-
-#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
-static struct platform_device bfin_mii_bus = {
-        .name = "bfin_mii_bus",
-};
-
-static struct platform_device bfin_mac_device = {
-        .name = "bfin_mac",
-        .dev.platform_data = &bfin_mii_bus,
-};
-#endif
-
-#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
-static struct resource net2272_bfin_resources[] = {
-        {
-                .start = 0x20300000,
-                .end = 0x20300000 + 0x100,
-                .flags = IORESOURCE_MEM,
-        }, {
-                .start = IRQ_PF7,
-                .end = IRQ_PF7,
-                .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
-        },
-};
-
-static struct platform_device net2272_bfin_device = {
-        .name = "net2272",
-        .id = -1,
-        .num_resources = ARRAY_SIZE(net2272_bfin_resources),
-        .resource = net2272_bfin_resources,
-};
-#endif
-
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
-/* all SPI peripherals info goes here */
-
-#if defined(CONFIG_MTD_M25P80) \
-        || defined(CONFIG_MTD_M25P80_MODULE)
-static struct mtd_partition bfin_spi_flash_partitions[] = {
-        {
-                .name = "bootloader(spi)",
-                .size = 0x00020000,
-                .offset = 0,
-                .mask_flags = MTD_CAP_ROM
-        }, {
-                .name = "linux kernel(spi)",
-                .size = 0xe0000,
-                .offset = 0x20000
-        }, {
-                .name = "file system(spi)",
-                .size = 0x700000,
-                .offset = 0x00100000,
-        }
-};
-
-static struct flash_platform_data bfin_spi_flash_data = {
-        .name = "m25p80",
-        .parts = bfin_spi_flash_partitions,
-        .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
-        .type = "m25p64",
-};
-
-/* SPI flash chip (m25p64) */
-static struct bfin5xx_spi_chip spi_flash_chip_info = {
-        .enable_dma = 0,         /* use dma transfer with this chip*/
-        .bits_per_word = 8,
-};
-#endif
-
-#if defined(CONFIG_SPI_ADC_BF533) \
-        || defined(CONFIG_SPI_ADC_BF533_MODULE)
-/* SPI ADC chip */
-static struct bfin5xx_spi_chip spi_adc_chip_info = {
-        .enable_dma = 1,         /* use dma transfer with this chip*/
-        .bits_per_word = 16,
-};
-#endif
-
-#if defined(CONFIG_SND_BLACKFIN_AD1836) \
-        || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
-static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
-        .enable_dma = 0,
-        .bits_per_word = 16,
-};
-#endif
-
-#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)
-static struct bfin5xx_spi_chip ad9960_spi_chip_info = {
-        .enable_dma = 0,
-        .bits_per_word = 16,
-};
-#endif
-
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-static struct bfin5xx_spi_chip spi_mmc_chip_info = {
-        .enable_dma = 1,
-        .bits_per_word = 8,
-};
-#endif
-
-#if defined(CONFIG_PBX)
-static struct bfin5xx_spi_chip spi_si3xxx_chip_info = {
-        .ctl_reg        = 0x4, /* send zero */
-        .enable_dma     = 0,
-        .bits_per_word  = 8,
-        .cs_change_per_word = 1,
-};
-#endif
-
-#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
-static struct bfin5xx_spi_chip spi_ad7877_chip_info = {
-        .enable_dma = 0,
-        .bits_per_word = 16,
-};
-
-static const struct ad7877_platform_data bfin_ad7877_ts_info = {
-        .model                  = 7877,
-        .vref_delay_usecs       = 50,   /* internal, no capacitor */
-        .x_plate_ohms           = 419,
-        .y_plate_ohms           = 486,
-        .pressure_max           = 1000,
-        .pressure_min           = 0,
-        .stopacq_polarity       = 1,
-        .first_conversion_delay = 3,
-        .acquisition_time       = 1,
-        .averaging              = 1,
-        .pen_down_acc_interval  = 1,
-};
-#endif
-
-static struct spi_board_info bfin_spi_board_info[] __initdata = {
-#if defined(CONFIG_MTD_M25P80) \
-        || defined(CONFIG_MTD_M25P80_MODULE)
-        {
-                /* the modalias must be the same as spi device driver name */
-                .modalias = "m25p80", /* Name of spi_driver for this device */
-                .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
-                .bus_num = 0, /* Framework bus number */
-                .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
-                .platform_data = &bfin_spi_flash_data,
-                .controller_data = &spi_flash_chip_info,
-                .mode = SPI_MODE_3,
-        },
-#endif
-
-#if defined(CONFIG_SPI_ADC_BF533) \
-        || defined(CONFIG_SPI_ADC_BF533_MODULE)
-        {
-                .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
-                .max_speed_hz = 6250000,     /* max spi clock (SCK) speed in HZ */
-                .bus_num = 0, /* Framework bus number */
-                .chip_select = 1, /* Framework chip select. */
-                .platform_data = NULL, /* No spi_driver specific config */
-                .controller_data = &spi_adc_chip_info,
-        },
-#endif
-
-#if defined(CONFIG_SND_BLACKFIN_AD1836) \
-        || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
-        {
-                .modalias = "ad1836-spi",
-                .max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
-                .bus_num = 0,
-                .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
-                .controller_data = &ad1836_spi_chip_info,
-        },
-#endif
-#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)
-        {
-                .modalias = "ad9960-spi",
-                .max_speed_hz = 10000000,     /* max spi clock (SCK) speed in HZ */
-                .bus_num = 0,
-                .chip_select = 1,
-                .controller_data = &ad9960_spi_chip_info,
-        },
-#endif
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-        {
-                .modalias = "spi_mmc_dummy",
-                .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
-                .bus_num = 0,
-                .chip_select = 0,
-                .platform_data = NULL,
-                .controller_data = &spi_mmc_chip_info,
-                .mode = SPI_MODE_3,
-        },
-        {
-                .modalias = "spi_mmc",
-                .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
-                .bus_num = 0,
-                .chip_select = CONFIG_SPI_MMC_CS_CHAN,
-                .platform_data = NULL,
-                .controller_data = &spi_mmc_chip_info,
-                .mode = SPI_MODE_3,
-        },
-#endif
-#if defined(CONFIG_PBX)
-        {
-                .modalias = "fxs-spi",
-                .max_speed_hz = 12500000,     /* max spi clock (SCK) speed in HZ */
-                .bus_num = 0,
-                .chip_select = 8 - CONFIG_J11_JUMPER,
-                .controller_data = &spi_si3xxx_chip_info,
-                .mode = SPI_MODE_3,
-        },
-        {
-                .modalias = "fxo-spi",
-                .max_speed_hz = 12500000,     /* max spi clock (SCK) speed in HZ */
-                .bus_num = 0,
-                .chip_select = 8 - CONFIG_J19_JUMPER,
-                .controller_data = &spi_si3xxx_chip_info,
-                .mode = SPI_MODE_3,
-        },
-#endif
-#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
-        {
-                .modalias               = "ad7877",
-                .platform_data          = &bfin_ad7877_ts_info,
-                .irq                    = IRQ_PF6,
-                .max_speed_hz   = 12500000,     /* max spi clock (SCK) speed in HZ */
-                .bus_num        = 0,
-                .chip_select  = 1,
-                .controller_data = &spi_ad7877_chip_info,
-        },
-#endif
-};
-
-/* SPI controller data */
-static struct bfin5xx_spi_master bfin_spi0_info = {
-        .num_chipselect = 8,
-        .enable_dma = 1,  /* master has the ability to do dma transfer */
-        .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
-};
-
-/* SPI (0) */
-static struct resource bfin_spi0_resource[] = {
-        [0] = {
-                .start = SPI0_REGBASE,
-                .end   = SPI0_REGBASE + 0xFF,
-                .flags = IORESOURCE_MEM,
-                },
-        [1] = {
-                .start = CH_SPI,
-                .end   = CH_SPI,
-                .flags = IORESOURCE_IRQ,
-        },
-};
-
-static struct platform_device bfin_spi0_device = {
-        .name = "bfin-spi",
-        .id = 0, /* Bus number */
-        .num_resources = ARRAY_SIZE(bfin_spi0_resource),
-        .resource = bfin_spi0_resource,
-        .dev = {
-                .platform_data = &bfin_spi0_info, /* Passed to driver */
-        },
-};
-#endif  /* spi master and devices */
-
-#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
-static struct platform_device bfin_fb_device = {
-        .name = "bf537-lq035",
-};
-#endif
-
-#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
-static struct platform_device bfin_fb_adv7393_device = {
-        .name = "bfin-adv7393",
-};
-#endif
-
-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
-static struct resource bfin_uart_resources[] = {
-        {
-                .start = 0xFFC00400,
-                .end = 0xFFC004FF,
-                .flags = IORESOURCE_MEM,
-        }, {
-                .start = 0xFFC02000,
-                .end = 0xFFC020FF,
-                .flags = IORESOURCE_MEM,
-        },
-};
-
-static struct platform_device bfin_uart_device = {
-        .name = "bfin-uart",
-        .id = 1,
-        .num_resources = ARRAY_SIZE(bfin_uart_resources),
-        .resource = bfin_uart_resources,
-};
-#endif
-
-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
-#ifdef CONFIG_BFIN_SIR0
-static struct resource bfin_sir0_resources[] = {
-        {
-                .start = 0xFFC00400,
-                .end = 0xFFC004FF,
-                .flags = IORESOURCE_MEM,
-        },
-        {
-                .start = IRQ_UART0_RX,
-                .end = IRQ_UART0_RX+1,
-                .flags = IORESOURCE_IRQ,
-        },
-        {
-                .start = CH_UART0_RX,
-                .end = CH_UART0_RX+1,
-                .flags = IORESOURCE_DMA,
-        },
-};
-
-static struct platform_device bfin_sir0_device = {
-        .name = "bfin_sir",
-        .id = 0,
-        .num_resources = ARRAY_SIZE(bfin_sir0_resources),
-        .resource = bfin_sir0_resources,
-};
-#endif
-#ifdef CONFIG_BFIN_SIR1
-static struct resource bfin_sir1_resources[] = {
-        {
-                .start = 0xFFC02000,
-                .end = 0xFFC020FF,
-                .flags = IORESOURCE_MEM,
-        },
-        {
-                .start = IRQ_UART1_RX,
-                .end = IRQ_UART1_RX+1,
-                .flags = IORESOURCE_IRQ,
-        },
-        {
-                .start = CH_UART1_RX,
-                .end = CH_UART1_RX+1,
-                .flags = IORESOURCE_DMA,
-        },
-};
-
-static struct platform_device bfin_sir1_device = {
-        .name = "bfin_sir",
-        .id = 1,
-        .num_resources = ARRAY_SIZE(bfin_sir1_resources),
-        .resource = bfin_sir1_resources,
-};
-#endif
-#endif
-
-#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
-static struct resource bfin_twi0_resource[] = {
-        [0] = {
-                .start = TWI0_REGBASE,
-                .end   = TWI0_REGBASE + 0xFF,
-                .flags = IORESOURCE_MEM,
-        },
-        [1] = {
-                .start = IRQ_TWI,
-                .end   = IRQ_TWI,
-                .flags = IORESOURCE_IRQ,
-        },
-};
-
-static struct platform_device i2c_bfin_twi_device = {
-        .name = "i2c-bfin-twi",
-        .id = 0,
-        .num_resources = ARRAY_SIZE(bfin_twi0_resource),
-        .resource = bfin_twi0_resource,
-};
-#endif
-
-#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
-static struct platform_device bfin_sport0_uart_device = {
-        .name = "bfin-sport-uart",
-        .id = 0,
-};
-
-static struct platform_device bfin_sport1_uart_device = {
-        .name = "bfin-sport-uart",
-        .id = 1,
-};
-#endif
-
-static struct platform_device *stamp_devices[] __initdata = {
-#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
-        &bfin_pcmcia_cf_device,
-#endif
-
-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
-        &rtc_device,
-#endif
-
-#if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE)
-        &sl811_hcd_device,
-#endif
-
-#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
-        &isp1362_hcd_device,
-#endif
-
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
-        &smc91x_device,
-#endif
-
-#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
-        &dm9000_device,
-#endif
-
-#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
-        &bfin_mii_bus,
-        &bfin_mac_device,
-#endif
-
-#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
-        &net2272_bfin_device,
-#endif
-
-#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
-        &bfin_isp1760_device,
-#endif
-
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
-        &bfin_spi0_device,
-#endif
-
-#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
-        &bfin_fb_device,
-#endif
-
-#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
-        &bfin_fb_adv7393_device,
-#endif
-
-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
-        &bfin_uart_device,
-#endif
-
-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
-#ifdef CONFIG_BFIN_SIR0
-        &bfin_sir0_device,
-#endif
-#ifdef CONFIG_BFIN_SIR1
-        &bfin_sir1_device,
-#endif
-#endif
-
-#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
-        &i2c_bfin_twi_device,
-#endif
-
-#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
-        &bfin_sport0_uart_device,
-        &bfin_sport1_uart_device,
-#endif
-};
-
-static int __init generic_init(void)
-{
-        printk(KERN_INFO "%s(): registering device resources\n", __func__);
-        platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
-        spi_register_board_info(bfin_spi_board_info,
-                                ARRAY_SIZE(bfin_spi_board_info));
-#endif
-
-        return 0;
-}
-
-arch_initcall(generic_init);
-
-void native_machine_restart(char *cmd)
-{
-        /* workaround reboot hang when booting from SPI */
-        if ((bfin_read_SYSCR() & 0x7) == 0x3)
-                bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS);
-}
-
-#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
-void bfin_get_ether_addr(char *addr)
-{
-        random_ether_addr(addr);
-        printk(KERN_WARNING "%s:%s: Setting Ethernet MAC to a random one\n", __FILE__, __func__);
-}
-EXPORT_SYMBOL(bfin_get_ether_addr);
-#endif
diff --git a/arch/blackfin/mach-bf537/boards/minotaur.c b/arch/blackfin/mach-bf537/boards/minotaur.c
index db7d3a385e4b..3c159819e555 100644
--- a/arch/blackfin/mach-bf537/boards/minotaur.c
+++ b/arch/blackfin/mach-bf537/boards/minotaur.c
@@ -134,9 +134,9 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-static struct bfin5xx_spi_chip spi_mmc_chip_info = {
-        .enable_dma = 1,
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+static struct bfin5xx_spi_chip mmc_spi_chip_info = {
+        .enable_dma = 0,
         .bits_per_word = 8,
 };
 #endif
@@ -156,23 +156,13 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
         },
 #endif
 
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
         {
-                .modalias = "spi_mmc_dummy",
+                .modalias = "mmc_spi",
                 .max_speed_hz = 5000000,     /* max spi clock (SCK) speed in HZ */
                 .bus_num = 0,
-                .chip_select = 0,
-                .platform_data = NULL,
-                .controller_data = &spi_mmc_chip_info,
-                .mode = SPI_MODE_3,
-        },
-        {
-                .modalias = "spi_mmc",
-                .max_speed_hz = 5000000,     /* max spi clock (SCK) speed in HZ */
-                .bus_num = 0,
-                .chip_select = CONFIG_SPI_MMC_CS_CHAN,
-                .platform_data = NULL,
-                .controller_data = &spi_mmc_chip_info,
+                .chip_select = 5,
+                .controller_data = &mmc_spi_chip_info,
                 .mode = SPI_MODE_3,
         },
 #endif
diff --git a/arch/blackfin/mach-bf537/boards/pnav10.c b/arch/blackfin/mach-bf537/boards/pnav10.c
index 590eb3a139b7..4e1de1e53f89 100644
--- a/arch/blackfin/mach-bf537/boards/pnav10.c
+++ b/arch/blackfin/mach-bf537/boards/pnav10.c
@@ -289,9 +289,9 @@ static struct bfin5xx_spi_chip ad9960_spi_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-static struct bfin5xx_spi_chip spi_mmc_chip_info = {
-        .enable_dma = 1,
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+static struct bfin5xx_spi_chip mmc_spi_chip_info = {
+        .enable_dma = 0,
         .bits_per_word = 8,
 };
 #endif
@@ -364,23 +364,13 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
                 .controller_data = &ad9960_spi_chip_info,
         },
 #endif
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-        {
-                .modalias = "spi_mmc_dummy",
-                .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
-                .bus_num = 0,
-                .chip_select = 7,
-                .platform_data = NULL,
-                .controller_data = &spi_mmc_chip_info,
-                .mode = SPI_MODE_3,
-        },
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
         {
-                .modalias = "spi_mmc",
+                .modalias = "mmc_spi",
                 .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
                 .bus_num = 0,
-                .chip_select = CONFIG_SPI_MMC_CS_CHAN,
-                .platform_data = NULL,
-                .controller_data = &spi_mmc_chip_info,
+                .chip_select = 5,
+                .controller_data = &mmc_spi_chip_info,
                 .mode = SPI_MODE_3,
         },
 #endif
diff --git a/arch/blackfin/mach-bf537/boards/tcm_bf537.c b/arch/blackfin/mach-bf537/boards/tcm_bf537.c
index 3f4f203a06ec..53ad10f3cd76 100644
--- a/arch/blackfin/mach-bf537/boards/tcm_bf537.c
+++ b/arch/blackfin/mach-bf537/boards/tcm_bf537.c
@@ -108,9 +108,9 @@ static struct bfin5xx_spi_chip ad9960_spi_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-static struct bfin5xx_spi_chip spi_mmc_chip_info = {
-        .enable_dma = 1,
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+static struct bfin5xx_spi_chip mmc_spi_chip_info = {
+        .enable_dma = 0,
         .bits_per_word = 8,
 };
 #endif
@@ -160,23 +160,13 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
         },
 #endif
 
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-        {
-                .modalias = "spi_mmc_dummy",
-                .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
-                .bus_num = 0,
-                .chip_select = 7,
-                .platform_data = NULL,
-                .controller_data = &spi_mmc_chip_info,
-                .mode = SPI_MODE_3,
-        },
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
         {
-                .modalias = "spi_mmc",
+                .modalias = "mmc_spi",
                 .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
                 .bus_num = 0,
-                .chip_select = CONFIG_SPI_MMC_CS_CHAN,
-                .platform_data = NULL,
-                .controller_data = &spi_mmc_chip_info,
+                .chip_select = 5,
+                .controller_data = &mmc_spi_chip_info,
                 .mode = SPI_MODE_3,
         },
 #endif
diff --git a/arch/blackfin/mach-bf537/include/mach/anomaly.h b/arch/blackfin/mach-bf537/include/mach/anomaly.h
index 9cb39121d1cb..1bfd80c26c90 100644
--- a/arch/blackfin/mach-bf537/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf537/include/mach/anomaly.h
@@ -2,7 +2,7 @@
  * File: include/asm-blackfin/mach-bf537/anomaly.h
  * Bugs: Enter bugs at http://blackfin.uclinux.org/
  *
- * Copyright (C) 2004-2008 Analog Devices Inc.
+ * Copyright (C) 2004-2009 Analog Devices Inc.
  * Licensed under the GPL-2 or later.
  */
 
@@ -110,7 +110,7 @@
 #define ANOMALY_05000301 (1)
 /* SSYNCs After Writes To CAN/DMA MMR Registers Are Not Always Handled Correctly */
 #define ANOMALY_05000304 (__SILICON_REVISION__ < 3)
-/* New Feature: Additional Hysteresis on SPORT Input Pins (Not Available On Older Silicon) */
+/* SPORT_HYS Bit in PLL_CTL Register Is Not Functional */
 #define ANOMALY_05000305 (__SILICON_REVISION__ < 3)
 /* SCKELOW Bit Does Not Maintain State Through Hibernate */
 #define ANOMALY_05000307 (__SILICON_REVISION__ < 3)
@@ -168,9 +168,12 @@
 #define ANOMALY_05000323 (0)
 #define ANOMALY_05000353 (1)
 #define ANOMALY_05000363 (0)
+#define ANOMALY_05000380 (0)
 #define ANOMALY_05000386 (1)
 #define ANOMALY_05000412 (0)
 #define ANOMALY_05000432 (0)
 #define ANOMALY_05000435 (0)
+#define ANOMALY_05000447 (0)
+#define ANOMALY_05000448 (0)
 
 #endif
diff --git a/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h
index b3f87e1d16a2..9e34700844a2 100644
--- a/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h
@@ -144,7 +144,7 @@ struct bfin_serial_res bfin_serial_resource[] = {
         CH_UART0_TX,
         CH_UART0_RX,
 #endif
-#ifdef CONFIG_BFIN_UART0_CTSRTS
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
         CONFIG_UART0_CTS_PIN,
         CONFIG_UART0_RTS_PIN,
 #endif
@@ -158,7 +158,7 @@ struct bfin_serial_res bfin_serial_resource[] = {
         CH_UART1_TX,
         CH_UART1_RX,
 #endif
-#ifdef CONFIG_BFIN_UART1_CTSRTS
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
         CONFIG_UART1_CTS_PIN,
         CONFIG_UART1_RTS_PIN,
 #endif
diff --git a/arch/blackfin/mach-bf538/include/mach/anomaly.h b/arch/blackfin/mach-bf538/include/mach/anomaly.h
index e130b4f8a05d..3a5699827363 100644
--- a/arch/blackfin/mach-bf538/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf538/include/mach/anomaly.h
@@ -2,7 +2,7 @@
  * File: include/asm-blackfin/mach-bf538/anomaly.h
  * Bugs: Enter bugs at http://blackfin.uclinux.org/
  *
- * Copyright (C) 2004-2008 Analog Devices Inc.
+ * Copyright (C) 2004-2009 Analog Devices Inc.
  * Licensed under the GPL-2 or later.
  */
 
@@ -120,13 +120,17 @@
 #define ANOMALY_05000198 (0)
 #define ANOMALY_05000230 (0)
 #define ANOMALY_05000263 (0)
+#define ANOMALY_05000305 (0)
 #define ANOMALY_05000311 (0)
 #define ANOMALY_05000323 (0)
 #define ANOMALY_05000353 (1)
 #define ANOMALY_05000363 (0)
+#define ANOMALY_05000380 (0)
 #define ANOMALY_05000386 (1)
 #define ANOMALY_05000412 (0)
 #define ANOMALY_05000432 (0)
 #define ANOMALY_05000435 (0)
+#define ANOMALY_05000447 (0)
+#define ANOMALY_05000448 (0)
 
 #endif
diff --git a/arch/blackfin/mach-bf538/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf538/include/mach/bfin_serial_5xx.h
index 40503b6b89a3..3c2811ebecdd 100644
--- a/arch/blackfin/mach-bf538/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf538/include/mach/bfin_serial_5xx.h
@@ -144,7 +144,7 @@ struct bfin_serial_res bfin_serial_resource[] = {
         CH_UART0_TX,
         CH_UART0_RX,
 #endif
-#ifdef CONFIG_BFIN_UART0_CTSRTS
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
         CONFIG_UART0_CTS_PIN,
         CONFIG_UART0_RTS_PIN,
 #endif
@@ -158,7 +158,7 @@ struct bfin_serial_res bfin_serial_resource[] = {
         CH_UART1_TX,
         CH_UART1_RX,
 #endif
-#ifdef CONFIG_BFIN_UART1_CTSRTS
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
         CONFIG_UART1_CTS_PIN,
         CONFIG_UART1_RTS_PIN,
 #endif
diff --git a/arch/blackfin/mach-bf548/include/mach/anomaly.h b/arch/blackfin/mach-bf548/include/mach/anomaly.h
index 23d03c52f4b4..882e40ccf0d1 100644
--- a/arch/blackfin/mach-bf548/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf548/include/mach/anomaly.h
@@ -2,12 +2,12 @@
  * File: include/asm-blackfin/mach-bf548/anomaly.h
  * Bugs: Enter bugs at http://blackfin.uclinux.org/
  *
- * Copyright (C) 2004-2008 Analog Devices Inc.
+ * Copyright (C) 2004-2009 Analog Devices Inc.
  * Licensed under the GPL-2 or later.
  */
 
 /* This file shoule be up to date with:
- *  - Revision G, 08/07/2008; ADSP-BF542/BF544/BF547/BF548/BF549 Blackfin Processor Anomaly List
+ *  - Revision H, 01/16/2009; ADSP-BF542/BF544/BF547/BF548/BF549 Blackfin Processor Anomaly List
  */
 
 #ifndef _MACH_ANOMALY_H_
@@ -91,8 +91,6 @@
 #define ANOMALY_05000371 (__SILICON_REVISION__ < 2)
 /* USB DP/DM Data Pins May Lose State When Entering Hibernate */
 #define ANOMALY_05000372 (__SILICON_REVISION__ < 1)
-/* Mobile DDR Operation Not Functional */
-#define ANOMALY_05000377 (1)
 /* Security/Authentication Speedpath Causes Authentication To Fail To Initiate */
 #define ANOMALY_05000378 (__SILICON_REVISION__ < 2)
 /* 16-Bit NAND FLASH Boot Mode Is Not Functional */
@@ -157,8 +155,22 @@
 #define ANOMALY_05000429 (__SILICON_REVISION__ < 2)
 /* Software System Reset Corrupts PLL_LOCKCNT Register */
 #define ANOMALY_05000430 (__SILICON_REVISION__ >= 2)
+/* Incorrect Use of Stack in Lockbox Firmware During Authentication */
+#define ANOMALY_05000431 (__SILICON_REVISION__ < 3)
+/* OTP Write Accesses Not Supported */
+#define ANOMALY_05000442 (__SILICON_REVISION__ < 1)
 /* IFLUSH Instruction at End of Hardware Loop Causes Infinite Stall */
 #define ANOMALY_05000443 (1)
+/* CDMAPRIO and L2DMAPRIO Bits in the SYSCR Register Are Not Functional */
+#define ANOMALY_05000446 (1)
+/* UART IrDA Receiver Fails on Extended Bit Pulses */
+#define ANOMALY_05000447 (1)
+/* DDR Clock Duty Cycle Spec Violation (tCH, tCL) */
+#define ANOMALY_05000448 (__SILICON_REVISION__ == 1)
+/* Reduced Timing Margins on DDR Output Setup and Hold (tDS and tDH) */
+#define ANOMALY_05000449 (__SILICON_REVISION__ == 1)
+/* USB DMA Mode 1 Short Packet Data Corruption */
+#define ANOMALY_05000450 (1
 
 /* Anomalies that don't exist on this proc */
 #define ANOMALY_05000125 (0)
@@ -171,6 +183,8 @@
 #define ANOMALY_05000263 (0)
 #define ANOMALY_05000266 (0)
 #define ANOMALY_05000273 (0)
+#define ANOMALY_05000278 (0)
+#define ANOMALY_05000305 (0)
 #define ANOMALY_05000307 (0)
 #define ANOMALY_05000311 (0)
 #define ANOMALY_05000323 (0)
diff --git a/arch/blackfin/mach-bf548/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf548/include/mach/bfin_serial_5xx.h
index e4cf35e7ab9f..c05e79cba257 100644
--- a/arch/blackfin/mach-bf548/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf548/include/mach/bfin_serial_5xx.h
@@ -63,7 +63,7 @@
 #define UART_ENABLE_INTS(x, v) UART_SET_IER(x, v)
 #define UART_DISABLE_INTS(x) UART_CLEAR_IER(x, 0xF)
 
-#if defined(CONFIG_BFIN_UART0_CTSRTS) || defined(CONFIG_BFIN_UART1_CTSRTS)
+#if defined(CONFIG_BFIN_UART0_CTSRTS) || defined(CONFIG_BFIN_UART2_CTSRTS)
 # define CONFIG_SERIAL_BFIN_CTSRTS
 
 # ifndef CONFIG_UART0_CTS_PIN
@@ -74,12 +74,12 @@
 #  define CONFIG_UART0_RTS_PIN -1
 # endif
 
-# ifndef CONFIG_UART1_CTS_PIN
-#  define CONFIG_UART1_CTS_PIN -1
+# ifndef CONFIG_UART2_CTS_PIN
+#  define CONFIG_UART2_CTS_PIN -1
 # endif
 
-# ifndef CONFIG_UART1_RTS_PIN
-#  define CONFIG_UART1_RTS_PIN -1
+# ifndef CONFIG_UART2_RTS_PIN
+#  define CONFIG_UART2_RTS_PIN -1
 # endif
 #endif
 
@@ -130,7 +130,7 @@ struct bfin_serial_res bfin_serial_resource[] = {
         CH_UART0_TX,
         CH_UART0_RX,
 #endif
-#ifdef CONFIG_BFIN_UART0_CTSRTS
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
         CONFIG_UART0_CTS_PIN,
         CONFIG_UART0_RTS_PIN,
 #endif
@@ -144,6 +144,10 @@ struct bfin_serial_res bfin_serial_resource[] = {
         CH_UART1_TX,
         CH_UART1_RX,
 #endif
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
+        0,
+        0,
+#endif
         },
 #endif
 #ifdef CONFIG_SERIAL_BFIN_UART2
@@ -154,7 +158,7 @@ struct bfin_serial_res bfin_serial_resource[] = {
         CH_UART2_TX,
         CH_UART2_RX,
 #endif
-#ifdef CONFIG_BFIN_UART2_CTSRTS
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
         CONFIG_UART2_CTS_PIN,
         CONFIG_UART2_RTS_PIN,
 #endif
@@ -168,6 +172,10 @@ struct bfin_serial_res bfin_serial_resource[] = {
         CH_UART3_TX,
         CH_UART3_RX,
 #endif
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
+        0,
+        0,
+#endif
         },
 #endif
 };
diff --git a/arch/blackfin/mach-bf548/include/mach/irq.h b/arch/blackfin/mach-bf548/include/mach/irq.h
index 60299a71e090..f194625f6821 100644
--- a/arch/blackfin/mach-bf548/include/mach/irq.h
+++ b/arch/blackfin/mach-bf548/include/mach/irq.h
@@ -123,8 +123,8 @@ Events         (highest priority)  EMU         0
 #define IRQ_MXVR_ERROR          BFIN_IRQ(51)    /* MXVR Status (Error) Interrupt */
 #define IRQ_MXVR_MSG            BFIN_IRQ(52)    /* MXVR Message Interrupt */
 #define IRQ_MXVR_PKT            BFIN_IRQ(53)    /* MXVR Packet Interrupt */
-#define IRQ_EPP1_ERROR          BFIN_IRQ(54)    /* EPPI1 Error Interrupt */
-#define IRQ_EPP2_ERROR          BFIN_IRQ(55)    /* EPPI2 Error Interrupt */
+#define IRQ_EPPI1_ERROR         BFIN_IRQ(54)    /* EPPI1 Error Interrupt */
+#define IRQ_EPPI2_ERROR         BFIN_IRQ(55)    /* EPPI2 Error Interrupt */
 #define IRQ_UART3_ERROR         BFIN_IRQ(56)    /* UART3 Status (Error) Interrupt */
 #define IRQ_HOST_ERROR          BFIN_IRQ(57)    /* HOST Status (Error) Interrupt */
 #define IRQ_PIXC_ERROR          BFIN_IRQ(59)    /* PIXC Status (Error) Interrupt */
@@ -361,8 +361,8 @@ Events         (highest priority)  EMU         0
 #define IRQ_UART2_ERR           IRQ_UART2_ERROR
 #define IRQ_CAN0_ERR            IRQ_CAN0_ERROR
 #define IRQ_MXVR_ERR            IRQ_MXVR_ERROR
-#define IRQ_EPP1_ERR            IRQ_EPP1_ERROR
-#define IRQ_EPP2_ERR            IRQ_EPP2_ERROR
+#define IRQ_EPPI1_ERR           IRQ_EPPI1_ERROR
+#define IRQ_EPPI2_ERR           IRQ_EPPI2_ERROR
 #define IRQ_UART3_ERR           IRQ_UART3_ERROR
 #define IRQ_HOST_ERR            IRQ_HOST_ERROR
 #define IRQ_PIXC_ERR            IRQ_PIXC_ERROR
diff --git a/arch/blackfin/mach-bf561/boards/Kconfig b/arch/blackfin/mach-bf561/boards/Kconfig
index e41a67b1fb53..e4bc6d7c5a6a 100644
--- a/arch/blackfin/mach-bf561/boards/Kconfig
+++ b/arch/blackfin/mach-bf561/boards/Kconfig
@@ -19,9 +19,4 @@ config BFIN561_BLUETECHNIX_CM
         help
           CM-BF561 support for EVAL- and DEV-Board.
 
-config GENERIC_BF561_BOARD
-        bool "Generic"
-        help
-          Generic or Custom board support.
-
 endchoice
diff --git a/arch/blackfin/mach-bf561/boards/Makefile b/arch/blackfin/mach-bf561/boards/Makefile
index 04add010b568..3a152559e957 100644
--- a/arch/blackfin/mach-bf561/boards/Makefile
+++ b/arch/blackfin/mach-bf561/boards/Makefile
@@ -2,7 +2,6 @@
 # arch/blackfin/mach-bf561/boards/Makefile
 #
 
-obj-$(CONFIG_GENERIC_BF561_BOARD)      += generic_board.o
 obj-$(CONFIG_BFIN561_BLUETECHNIX_CM)   += cm_bf561.o
 obj-$(CONFIG_BFIN561_EZKIT)            += ezkit.o
 obj-$(CONFIG_BFIN561_TEPLA)            += tepla.o
diff --git a/arch/blackfin/mach-bf561/boards/cm_bf561.c b/arch/blackfin/mach-bf561/boards/cm_bf561.c
index 6880d1ebfe60..f623c6b0719f 100644
--- a/arch/blackfin/mach-bf561/boards/cm_bf561.c
+++ b/arch/blackfin/mach-bf561/boards/cm_bf561.c
@@ -105,9 +105,9 @@ static struct bfin5xx_spi_chip ad9960_spi_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-static struct bfin5xx_spi_chip spi_mmc_chip_info = {
-        .enable_dma = 1,
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+static struct bfin5xx_spi_chip mmc_spi_chip_info = {
+        .enable_dma = 0,
         .bits_per_word = 8,
 };
 #endif
@@ -155,14 +155,13 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
                 .controller_data = &ad9960_spi_chip_info,
         },
 #endif
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
         {
-                .modalias = "spi_mmc",
+                .modalias = "mmc_spi",
                 .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
                 .bus_num = 0,
-                .chip_select = CONFIG_SPI_MMC_CS_CHAN,
-                .platform_data = NULL,
-                .controller_data = &spi_mmc_chip_info,
+                .chip_select = 5,
+                .controller_data = &mmc_spi_chip_info,
                 .mode = SPI_MODE_3,
         },
 #endif
diff --git a/arch/blackfin/mach-bf561/boards/generic_board.c b/arch/blackfin/mach-bf561/boards/generic_board.c
deleted file mode 100644
index 0ba366a0e696..000000000000
--- a/arch/blackfin/mach-bf561/boards/generic_board.c
+++ /dev/null
@@ -1,113 +0,0 @@
-/*
- * File:         arch/blackfin/mach-bf561/generic_board.c
- * Based on:     arch/blackfin/mach-bf533/ezkit.c
- * Author:       Aidan Williams <aidan@nicta.com.au>
- *
- * Created:
- * Description:
- *
- * Modified:
- *               Copyright 2005 National ICT Australia (NICTA)
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <linux/irq.h>
-
-const char bfin_board_name[] = "UNKNOWN BOARD";
-
-/*
- *  Driver needs to know address, irq and flag pin.
- */
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
-static struct resource smc91x_resources[] = {
-        {
-                .start = 0x2C010300,
-                .end = 0x2C010300 + 16,
-                .flags = IORESOURCE_MEM,
-        }, {
-                .start = IRQ_PROG_INTB,
-                .end = IRQ_PROG_INTB,
-                .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
-        }, {
-                .start = IRQ_PF9,
-                .end = IRQ_PF9,
-                .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
-        },
-};
-
-static struct platform_device smc91x_device = {
-        .name = "smc91x",
-        .id = 0,
-        .num_resources = ARRAY_SIZE(smc91x_resources),
-        .resource = smc91x_resources,
-};
-#endif
-
-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
-#ifdef CONFIG_BFIN_SIR0
-static struct resource bfin_sir0_resources[] = {
-        {
-                .start = 0xFFC00400,
-                .end = 0xFFC004FF,
-                .flags = IORESOURCE_MEM,
-        },
-        {
-                .start = IRQ_UART0_RX,
-                .end = IRQ_UART0_RX+1,
-                .flags = IORESOURCE_IRQ,
-        },
-        {
-                .start = CH_UART0_RX,
-                .end = CH_UART0_RX+1,
-                .flags = IORESOURCE_DMA,
-        },
-};
-
-static struct platform_device bfin_sir0_device = {
-        .name = "bfin_sir",
-        .id = 0,
-        .num_resources = ARRAY_SIZE(bfin_sir0_resources),
-        .resource = bfin_sir0_resources,
-};
-#endif
-#endif
-
-static struct platform_device *generic_board_devices[] __initdata = {
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
-        &smc91x_device,
-#endif
-
-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
-#ifdef CONFIG_BFIN_SIR0
-        &bfin_sir0_device,
-#endif
-#endif
-};
-
-static int __init generic_board_init(void)
-{
-        printk(KERN_INFO "%s(): registering device resources\n", __func__);
-        return platform_add_devices(generic_board_devices,
-                                    ARRAY_SIZE(generic_board_devices));
-}
-
-arch_initcall(generic_board_init);
diff --git a/arch/blackfin/mach-bf561/include/mach/anomaly.h b/arch/blackfin/mach-bf561/include/mach/anomaly.h
index 1a9e17562821..d0b0b3506440 100644
--- a/arch/blackfin/mach-bf561/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf561/include/mach/anomaly.h
@@ -2,7 +2,7 @@
  * File: include/asm-blackfin/mach-bf561/anomaly.h
  * Bugs: Enter bugs at http://blackfin.uclinux.org/
  *
- * Copyright (C) 2004-2008 Analog Devices Inc.
+ * Copyright (C) 2004-2009 Analog Devices Inc.
  * Licensed under the GPL-2 or later.
  */
 
@@ -224,7 +224,7 @@
 #define ANOMALY_05000301 (1)
 /* SSYNCs After Writes To DMA MMR Registers May Not Be Handled Correctly */
 #define ANOMALY_05000302 (1)
-/* New Feature: Additional Hysteresis on SPORT Input Pins (Not Available On Older Silicon) */
+/* SPORT_HYS Bit in PLL_CTL Register Is Not Functional */
 #define ANOMALY_05000305 (__SILICON_REVISION__ < 5)
 /* SCKELOW Bit Does Not Maintain State Through Hibernate */
 #define ANOMALY_05000307 (__SILICON_REVISION__ < 5)
@@ -283,8 +283,11 @@
 #define ANOMALY_05000273 (0)
 #define ANOMALY_05000311 (0)
 #define ANOMALY_05000353 (1)
+#define ANOMALY_05000380 (0)
 #define ANOMALY_05000386 (1)
 #define ANOMALY_05000432 (0)
 #define ANOMALY_05000435 (0)
+#define ANOMALY_05000447 (0)
+#define ANOMALY_05000448 (0)
 
 #endif
diff --git a/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h
index 043bfcf26c52..ca8c5f645209 100644
--- a/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h
@@ -134,7 +134,7 @@ struct bfin_serial_res bfin_serial_resource[] = {
         CH_UART_TX,
         CH_UART_RX,
 #endif
-#ifdef CONFIG_BFIN_UART0_CTSRTS
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
         CONFIG_UART0_CTS_PIN,
         CONFIG_UART0_RTS_PIN,
 #endif
diff --git a/arch/blackfin/mach-common/arch_checks.c b/arch/blackfin/mach-common/arch_checks.c
index 98133b968f7b..80d39b2f9db2 100644
--- a/arch/blackfin/mach-common/arch_checks.c
+++ b/arch/blackfin/mach-common/arch_checks.c
@@ -62,3 +62,12 @@
 #if (CONFIG_BOOT_LOAD & 0x3)
 # error "The kernel load address must be 4 byte aligned"
 #endif
+
+/* The entire kernel must be able to make a 24bit pcrel call to start of L1 */
+#if ((0xffffffff - L1_CODE_START + 1) + CONFIG_BOOT_LOAD) > 0x1000000
+# error "The kernel load address is too high; keep it below 10meg for safety"
+#endif
+
+#if ANOMALY_05000448
+# error You are using a part with anomaly 05000448, this issue causes random memory read/write failures - that means random crashes.
+#endif
diff --git a/arch/blackfin/mach-common/cache.S b/arch/blackfin/mach-common/cache.S
index 3c98dacbf289..aa0648c6a9fe 100644
--- a/arch/blackfin/mach-common/cache.S
+++ b/arch/blackfin/mach-common/cache.S
@@ -66,11 +66,33 @@
 
 /* Invalidate all instruction cache lines assocoiated with this memory area */
 ENTRY(_blackfin_icache_flush_range)
+/*
+ * Walkaround to avoid loading wrong instruction after invalidating icache
+ * and following sequence is met.
+ *
+ * 1) One instruction address is cached in the instruction cache.
+ * 2) This instruction in SDRAM is changed.
+ * 3) IFLASH[P0] is executed only once in blackfin_icache_flush_range().
+ * 4) This instruction is executed again, but the old one is loaded.
+ */
+        P0 = R0;
+        IFLUSH[P0];
         do_flush IFLUSH, , nop
 ENDPROC(_blackfin_icache_flush_range)
 
 /* Flush all cache lines assocoiated with this area of memory. */
 ENTRY(_blackfin_icache_dcache_flush_range)
+/*
+ * Walkaround to avoid loading wrong instruction after invalidating icache
+ * and following sequence is met.
+ *
+ * 1) One instruction address is cached in the instruction cache.
+ * 2) This instruction in SDRAM is changed.
+ * 3) IFLASH[P0] is executed only once in blackfin_icache_flush_range().
+ * 4) This instruction is executed again, but the old one is loaded.
+ */
+        P0 = R0;
+        IFLUSH[P0];
         do_flush FLUSH, IFLUSH
 ENDPROC(_blackfin_icache_dcache_flush_range)
 
diff --git a/arch/blackfin/mach-common/clocks-init.c b/arch/blackfin/mach-common/clocks-init.c
index 9dddb6f8cc85..35393651359b 100644
--- a/arch/blackfin/mach-common/clocks-init.c
+++ b/arch/blackfin/mach-common/clocks-init.c
@@ -17,7 +17,7 @@
 #define SDGCTL_WIDTH (1 << 31)  /* SDRAM external data path width */
 #define PLL_CTL_VAL \
         (((CONFIG_VCO_MULT & 63) << 9) | CLKIN_HALF | \
-         (PLL_BYPASS << 8) | (ANOMALY_05000265 ? 0x8000 : 0))
+         (PLL_BYPASS << 8) | (ANOMALY_05000305 ? 0 : 0x8000))
 
 __attribute__((l1_text))
 static void do_sync(void)
diff --git a/arch/blackfin/mach-common/dpmc_modes.S b/arch/blackfin/mach-common/dpmc_modes.S
index 4da50bcd9300..8009a512fb11 100644
--- a/arch/blackfin/mach-common/dpmc_modes.S
+++ b/arch/blackfin/mach-common/dpmc_modes.S
@@ -376,10 +376,22 @@ ENTRY(_do_hibernate)
 #endif
 
 #ifdef PINT0_ASSIGN
+        PM_SYS_PUSH(PINT0_MASK_SET)
+        PM_SYS_PUSH(PINT1_MASK_SET)
+        PM_SYS_PUSH(PINT2_MASK_SET)
+        PM_SYS_PUSH(PINT3_MASK_SET)
         PM_SYS_PUSH(PINT0_ASSIGN)
         PM_SYS_PUSH(PINT1_ASSIGN)
         PM_SYS_PUSH(PINT2_ASSIGN)
         PM_SYS_PUSH(PINT3_ASSIGN)
+        PM_SYS_PUSH(PINT0_INVERT_SET)
+        PM_SYS_PUSH(PINT1_INVERT_SET)
+        PM_SYS_PUSH(PINT2_INVERT_SET)
+        PM_SYS_PUSH(PINT3_INVERT_SET)
+        PM_SYS_PUSH(PINT0_EDGE_SET)
+        PM_SYS_PUSH(PINT1_EDGE_SET)
+        PM_SYS_PUSH(PINT2_EDGE_SET)
+        PM_SYS_PUSH(PINT3_EDGE_SET)
 #endif
 
         PM_SYS_PUSH(EBIU_AMBCTL0)
@@ -714,10 +726,22 @@ ENTRY(_do_hibernate)
         PM_SYS_POP(EBIU_AMBCTL0)
 
 #ifdef PINT0_ASSIGN
+        PM_SYS_POP(PINT3_EDGE_SET)
+        PM_SYS_POP(PINT2_EDGE_SET)
+        PM_SYS_POP(PINT1_EDGE_SET)
+        PM_SYS_POP(PINT0_EDGE_SET)
+        PM_SYS_POP(PINT3_INVERT_SET)
+        PM_SYS_POP(PINT2_INVERT_SET)
+        PM_SYS_POP(PINT1_INVERT_SET)
+        PM_SYS_POP(PINT0_INVERT_SET)
         PM_SYS_POP(PINT3_ASSIGN)
         PM_SYS_POP(PINT2_ASSIGN)
         PM_SYS_POP(PINT1_ASSIGN)
         PM_SYS_POP(PINT0_ASSIGN)
+        PM_SYS_POP(PINT3_MASK_SET)
+        PM_SYS_POP(PINT2_MASK_SET)
+        PM_SYS_POP(PINT1_MASK_SET)
+        PM_SYS_POP(PINT0_MASK_SET)
 #endif
 
 #ifdef SICA_IWR1
diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S
index 88de053bbe8e..21e65a339a22 100644
--- a/arch/blackfin/mach-common/entry.S
+++ b/arch/blackfin/mach-common/entry.S
@@ -600,6 +600,19 @@ ENTRY(_system_call)
         p2 = [p2];
 
         [p2+(TASK_THREAD+THREAD_KSP)] = sp;
+#ifdef CONFIG_IPIPE
+        r0 = sp;
+        SP += -12;
+        call ___ipipe_syscall_root;
+        SP += 12;
+        cc = r0 == 1;
+        if cc jump .Lsyscall_really_exit;
+        cc = r0 == -1;
+        if cc jump .Lresume_userspace;
+        r3 = [sp + PT_R3];
+        r4 = [sp + PT_R4];
+        p0 = [sp + PT_ORIG_P0];
+#endif /* CONFIG_IPIPE */
 
         /* Check the System Call */
         r7 = __NR_syscall;
@@ -654,6 +667,17 @@ ENTRY(_system_call)
         r7 =  r7 & r4;
 
 .Lsyscall_resched:
+#ifdef CONFIG_IPIPE
+        cc = BITTST(r7, TIF_IRQ_SYNC);
+        if !cc jump .Lsyscall_no_irqsync;
+        [--sp] = reti;
+        r0 = [sp++];
+        SP += -12;
+        call ___ipipe_sync_root;
+        SP += 12;
+        jump .Lresume_userspace_1;
+.Lsyscall_no_irqsync:
+#endif
         cc = BITTST(r7, TIF_NEED_RESCHED);
         if !cc jump .Lsyscall_sigpending;
 
@@ -685,6 +709,10 @@ ENTRY(_system_call)
 .Lsyscall_really_exit:
         r5 = [sp + PT_RESERVED];
         rets = r5;
+#ifdef CONFIG_IPIPE
+        [--sp] = reti;
+        r5 = [sp++];
+#endif /* CONFIG_IPIPE */
         rts;
 ENDPROC(_system_call)
 
@@ -771,6 +799,15 @@ _new_old_task:
 ENDPROC(_resume)
 
 ENTRY(_ret_from_exception)
+#ifdef CONFIG_IPIPE
+        [--sp] = rets;
+        SP += -12;
+        call ___ipipe_check_root
+        SP += 12
+        rets = [sp++];
+        cc = r0 == 0;
+        if cc jump 4f;                /* not on behalf of Linux, get out */
+#endif /* CONFIG_IPIPE */
         p2.l = lo(IPEND);
         p2.h = hi(IPEND);
 
@@ -827,6 +864,28 @@ ENTRY(_ret_from_exception)
         rts;
 ENDPROC(_ret_from_exception)
 
+#ifdef CONFIG_IPIPE
+
+_sync_root_irqs:
+        [--sp] = reti;          /* Reenable interrupts */
+        r0 = [sp++];
+        jump.l ___ipipe_sync_root
+
+_resume_kernel_from_int:
+        r0.l = _sync_root_irqs
+        r0.h = _sync_root_irqs
+        [--sp] = rets;
+        [--sp] = ( r7:4, p5:3 );
+        SP += -12;
+        call ___ipipe_call_irqtail
+        SP += 12;
+        ( r7:4, p5:3 ) = [sp++];
+        rets = [sp++];
+        rts
+#else
+#define _resume_kernel_from_int  2f
+#endif
+
 ENTRY(_return_from_int)
         /* If someone else already raised IRQ 15, do nothing.  */
         csync;
@@ -848,7 +907,7 @@ ENTRY(_return_from_int)
         r1 = r0 - r1;
         r2 = r0 & r1;
         cc = r2 == 0;
-        if !cc jump 2f;
+        if !cc jump _resume_kernel_from_int;
 
         /* Lower the interrupt level to 15.  */
         p0.l = lo(EVT15);
diff --git a/arch/blackfin/mach-common/interrupt.S b/arch/blackfin/mach-common/interrupt.S
index 43c4eb9acb65..0069c2dd4625 100644
--- a/arch/blackfin/mach-common/interrupt.S
+++ b/arch/blackfin/mach-common/interrupt.S
@@ -235,6 +235,7 @@ ENDPROC(_evt_system_call)
 
 #ifdef CONFIG_IPIPE
 ENTRY(___ipipe_call_irqtail)
+        p0 = r0;
         r0.l = 1f;
         r0.h = 1f;
         reti = r0;
@@ -242,9 +243,6 @@ ENTRY(___ipipe_call_irqtail)
 1:
         [--sp] = rets;
         [--sp] = ( r7:4, p5:3 );
-        p0.l = ___ipipe_irq_tail_hook;
-        p0.h = ___ipipe_irq_tail_hook;
-        p0 = [p0];
         sp += -12;
         call (p0);
         sp += 12;
@@ -259,7 +257,7 @@ ENTRY(___ipipe_call_irqtail)
         p0.h = hi(EVT14);
         [p0] = r0;
         csync;
-        r0 = 0x401f;
+        r0 = 0x401f (z);
         sti r0;
         raise 14;
         [--sp] = reti;          /* IRQs on. */
@@ -277,11 +275,7 @@ ENTRY(___ipipe_call_irqtail)
         p0.h = _bfin_irq_flags;
         r0 = [p0];
         sti r0;
-#if 0 /* FIXME: this actually raises scheduling latencies */
-        /* Reenable interrupts */
-        [--sp] = reti;
-        r0 = [sp++];
-#endif
         rts;
 ENDPROC(___ipipe_call_irqtail)
+
 #endif /* CONFIG_IPIPE */
diff --git a/arch/blackfin/mach-common/ints-priority.c b/arch/blackfin/mach-common/ints-priority.c
index 202494568c6c..a7d7b2dd4059 100644
--- a/arch/blackfin/mach-common/ints-priority.c
+++ b/arch/blackfin/mach-common/ints-priority.c
@@ -161,11 +161,15 @@ static void bfin_core_unmask_irq(unsigned int irq)
 
 static void bfin_internal_mask_irq(unsigned int irq)
 {
+        unsigned long flags;
+
 #ifdef CONFIG_BF53x
+        local_irq_save_hw(flags);
         bfin_write_SIC_IMASK(bfin_read_SIC_IMASK() &
                              ~(1 << SIC_SYSIRQ(irq)));
 #else
         unsigned mask_bank, mask_bit;
+        local_irq_save_hw(flags);
         mask_bank = SIC_SYSIRQ(irq) / 32;
         mask_bit = SIC_SYSIRQ(irq) % 32;
         bfin_write_SIC_IMASK(mask_bank, bfin_read_SIC_IMASK(mask_bank) &
@@ -175,15 +179,20 @@ static void bfin_internal_mask_irq(unsigned int irq)
                              ~(1 << mask_bit));
 #endif
 #endif
+        local_irq_restore_hw(flags);
 }
 
 static void bfin_internal_unmask_irq(unsigned int irq)
 {
+        unsigned long flags;
+
 #ifdef CONFIG_BF53x
+        local_irq_save_hw(flags);
         bfin_write_SIC_IMASK(bfin_read_SIC_IMASK() |
                              (1 << SIC_SYSIRQ(irq)));
 #else
         unsigned mask_bank, mask_bit;
+        local_irq_save_hw(flags);
         mask_bank = SIC_SYSIRQ(irq) / 32;
         mask_bit = SIC_SYSIRQ(irq) % 32;
         bfin_write_SIC_IMASK(mask_bank, bfin_read_SIC_IMASK(mask_bank) |
@@ -193,6 +202,7 @@ static void bfin_internal_unmask_irq(unsigned int irq)
                              (1 << mask_bit));
 #endif
 #endif
+        local_irq_restore_hw(flags);
 }
 
 #ifdef CONFIG_PM
@@ -390,7 +400,7 @@ static void bfin_demux_error_irq(unsigned int int_err_irq,
 static inline void bfin_set_irq_handler(unsigned irq, irq_flow_handler_t handle)
 {
 #ifdef CONFIG_IPIPE
-        _set_irq_handler(irq, handle_edge_irq);
+        _set_irq_handler(irq, handle_level_irq);
 #else
         struct irq_desc *desc = irq_desc + irq;
         /* May not call generic set_irq_handler() due to spinlock
@@ -1055,13 +1065,18 @@ int __init init_arch_irq(void)
 #endif
                 default:
 #ifdef CONFIG_IPIPE
-        /*
-         * We want internal interrupt sources to be masked, because
-         * ISRs may trigger interrupts recursively (e.g. DMA), but
-         * interrupts are _not_ masked at CPU level. So let's handle
-         * them as level interrupts.
-         */
-                        set_irq_handler(irq, handle_level_irq);
+                        /*
+                         * We want internal interrupt sources to be
+                         * masked, because ISRs may trigger interrupts
+                         * recursively (e.g. DMA), but interrupts are
+                         * _not_ masked at CPU level. So let's handle
+                         * most of them as level interrupts, except
+                         * the timer interrupt which is special.
+                         */
+                        if (irq == IRQ_SYSTMR || irq == IRQ_CORETMR)
+                                set_irq_handler(irq, handle_simple_irq);
+                        else
+                                set_irq_handler(irq, handle_level_irq);
 #else /* !CONFIG_IPIPE */
                         set_irq_handler(irq, handle_simple_irq);
 #endif /* !CONFIG_IPIPE */
@@ -1123,9 +1138,8 @@ int __init init_arch_irq(void)
 
 #ifdef CONFIG_IPIPE
         for (irq = 0; irq < NR_IRQS; irq++) {
-                struct irq_desc *desc = irq_desc + irq;
+                struct irq_desc *desc = irq_to_desc(irq);
                 desc->ic_prio = __ipipe_get_irq_priority(irq);
-                desc->thr_prio = __ipipe_get_irqthread_priority(irq);
         }
 #endif /* CONFIG_IPIPE */
 
@@ -1208,76 +1222,21 @@ int __ipipe_get_irq_priority(unsigned irq)
         return IVG15;
 }
 
-int __ipipe_get_irqthread_priority(unsigned irq)
-{
-        int ient, prio;
-        int demux_irq;
-
-        /* The returned priority value is rescaled to [0..IVG13+1]
-         * with 0 being the lowest effective priority level. */
-
-        if (irq <= IRQ_CORETMR)
-                return IVG13 - irq + 1;
-
-        /* GPIO IRQs are given the priority of the demux
-         * interrupt. */
-        if (IS_GPIOIRQ(irq)) {
-#if defined(CONFIG_BF54x)
-                u32 bank = PINT_2_BANK(irq2pint_lut[irq - SYS_IRQS]);
-                demux_irq = (bank == 0 ? IRQ_PINT0 :
-                                bank == 1 ? IRQ_PINT1 :
-                                bank == 2 ? IRQ_PINT2 :
-                                IRQ_PINT3);
-#elif defined(CONFIG_BF561)
-                demux_irq = (irq >= IRQ_PF32 ? IRQ_PROG2_INTA :
-                                irq >= IRQ_PF16 ? IRQ_PROG1_INTA :
-                                IRQ_PROG0_INTA);
-#elif defined(CONFIG_BF52x)
-                demux_irq = (irq >= IRQ_PH0 ? IRQ_PORTH_INTA :
-                                irq >= IRQ_PG0 ? IRQ_PORTG_INTA :
-                                IRQ_PORTF_INTA);
-#else
-                demux_irq = irq;
-#endif
-                return IVG13 - PRIO_GPIODEMUX(demux_irq) + 1;
-        }
-
-        /* The GPIO demux interrupt is given a lower priority
-         * than the GPIO IRQs, so that its threaded handler
-         * unmasks the interrupt line after the decoded IRQs
-         * have been processed. */
-        prio = PRIO_GPIODEMUX(irq);
-        /* demux irq? */
-        if (prio != -1)
-                return IVG13 - prio;
-
-        for (ient = 0; ient < NR_PERI_INTS; ient++) {
-                struct ivgx *ivg = ivg_table + ient;
-                if (ivg->irqno == irq) {
-                        for (prio = 0; prio <= IVG13-IVG7; prio++) {
-                                if (ivg7_13[prio].ifirst <= ivg &&
-                                    ivg7_13[prio].istop > ivg)
-                                        return IVG7 - prio;
-                        }
-                }
-        }
-
-        return 0;
-}
-
 /* Hw interrupts are disabled on entry (check SAVE_CONTEXT). */
 #ifdef CONFIG_DO_IRQ_L1
 __attribute__((l1_text))
 #endif
 asmlinkage int __ipipe_grab_irq(int vec, struct pt_regs *regs)
 {
+        struct ipipe_percpu_domain_data *p = ipipe_root_cpudom_ptr();
+        struct ipipe_domain *this_domain = ipipe_current_domain;
         struct ivgx *ivg_stop = ivg7_13[vec-IVG7].istop;
         struct ivgx *ivg = ivg7_13[vec-IVG7].ifirst;
-        int irq;
+        int irq, s;
 
         if (likely(vec == EVT_IVTMR_P)) {
                 irq = IRQ_CORETMR;
-                goto handle_irq;
+                goto core_tick;
         }
 
         SSYNC();
@@ -1319,24 +1278,39 @@ asmlinkage int __ipipe_grab_irq(int vec, struct pt_regs *regs)
         irq = ivg->irqno;
 
         if (irq == IRQ_SYSTMR) {
+#ifdef CONFIG_GENERIC_CLOCKEVENTS
+core_tick:
+#else
                 bfin_write_TIMER_STATUS(1); /* Latch TIMIL0 */
+#endif
                 /* This is basically what we need from the register frame. */
                 __raw_get_cpu_var(__ipipe_tick_regs).ipend = regs->ipend;
                 __raw_get_cpu_var(__ipipe_tick_regs).pc = regs->pc;
-                if (!ipipe_root_domain_p)
-                        __raw_get_cpu_var(__ipipe_tick_regs).ipend |= 0x10;
-                else
+                if (this_domain != ipipe_root_domain)
                         __raw_get_cpu_var(__ipipe_tick_regs).ipend &= ~0x10;
+                else
+                        __raw_get_cpu_var(__ipipe_tick_regs).ipend |= 0x10;
         }
 
-handle_irq:
+#ifndef CONFIG_GENERIC_CLOCKEVENTS
+core_tick:
+#endif
+        if (this_domain == ipipe_root_domain) {
+                s = __test_and_set_bit(IPIPE_SYNCDEFER_FLAG, &p->status);
+                barrier();
+        }
 
         ipipe_trace_irq_entry(irq);
         __ipipe_handle_irq(irq, regs);
-       ipipe_trace_irq_exit(irq);
+        ipipe_trace_irq_exit(irq);
 
-       if (ipipe_root_domain_p)
-                return !test_bit(IPIPE_STALL_FLAG, &ipipe_root_cpudom_var(status));
+        if (this_domain == ipipe_root_domain) {
+                set_thread_flag(TIF_IRQ_SYNC);
+                if (!s) {
+                        __clear_bit(IPIPE_SYNCDEFER_FLAG, &p->status);
+                        return !test_bit(IPIPE_STALL_FLAG, &p->status);
+                }
+        }
 
        return 0;
 }
diff --git a/arch/blackfin/mach-common/smp.c b/arch/blackfin/mach-common/smp.c
index 77c992847094..93eab6146079 100644
--- a/arch/blackfin/mach-common/smp.c
+++ b/arch/blackfin/mach-common/smp.c
@@ -158,10 +158,14 @@ static irqreturn_t ipi_handler(int irq, void *dev_instance)
                         kfree(msg);
                         break;
                 case BFIN_IPI_CALL_FUNC:
+                        spin_unlock(&msg_queue->lock);
                         ipi_call_function(cpu, msg);
+                        spin_lock(&msg_queue->lock);
                         break;
                 case BFIN_IPI_CPU_STOP:
+                        spin_unlock(&msg_queue->lock);
                         ipi_cpu_stop(cpu);
+                        spin_lock(&msg_queue->lock);
                         kfree(msg);
                         break;
                 default:
@@ -457,7 +461,7 @@ void smp_icache_flush_range_others(unsigned long start, unsigned long end)
         smp_flush_data.start = start;
         smp_flush_data.end = end;
 
-        if (smp_call_function(&ipi_flush_icache, &smp_flush_data, 1))
+        if (smp_call_function(&ipi_flush_icache, &smp_flush_data, 0))
                 printk(KERN_WARNING "SMP: failed to run I-cache flush request on other CPUs\n");
 }
 EXPORT_SYMBOL_GPL(smp_icache_flush_range_others);
diff --git a/arch/blackfin/mm/init.c b/arch/blackfin/mm/init.c
index d0532b72bba5..9c3629b9a689 100644
--- a/arch/blackfin/mm/init.c
+++ b/arch/blackfin/mm/init.c
@@ -104,7 +104,7 @@ void __init paging_init(void)
         }
 }
 
-asmlinkage void init_pda(void)
+asmlinkage void __init init_pda(void)
 {
         unsigned int cpu = raw_smp_processor_id();