[Blackfin] arch: Apply Bluetechnix vendor patch

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>

3 files changed, 627 insertions, 0 deletions

diff --git a/arch/blackfin/mach-bf548/boards/Kconfig b/arch/blackfin/mach-bf548/boards/Kconfig
index 057129064037..d38e52671853 100644
--- a/arch/blackfin/mach-bf548/boards/Kconfig
+++ b/arch/blackfin/mach-bf548/boards/Kconfig
@@ -8,5 +8,11 @@ config BFIN548_EZKIT
         bool "BF548-EZKIT"
         help
           BFIN548-EZKIT board support.
+          
+config BFIN548_BLUETECHNIX_CM
+        bool "Bluetechnix CM-BF548"
+        depends on (BF548)
+        help
+          CM-BF548 support for DEV-Board.         
 
 endchoice
diff --git a/arch/blackfin/mach-bf548/boards/Makefile b/arch/blackfin/mach-bf548/boards/Makefile
index a444cc739578..eed161dd7845 100644
--- a/arch/blackfin/mach-bf548/boards/Makefile
+++ b/arch/blackfin/mach-bf548/boards/Makefile
@@ -3,3 +3,4 @@
 #
 
 obj-$(CONFIG_BFIN548_EZKIT)            += ezkit.o led.o
+obj-$(CONFIG_BFIN548_BLUETECHNIX_CM)   += cm_bf548.o
diff --git a/arch/blackfin/mach-bf548/boards/cm_bf548.c b/arch/blackfin/mach-bf548/boards/cm_bf548.c
new file mode 100644
index 000000000000..1aa3c1b86bcf
--- /dev/null
+++ b/arch/blackfin/mach-bf548/boards/cm_bf548.c
@@ -0,0 +1,620 @@
+/*
+ * File:         arch/blackfin/mach-bf548/boards/cm_bf548.c
+ * Based on:     arch/blackfin/mach-bf537/boards/ezkit.c
+ * Author:       Aidan Williams <aidan@nicta.com.au>
+ *
+ * Created:
+ * Description:
+ *
+ * Modified:
+ *               Copyright 2005 National ICT Australia (NICTA)
+ *               Copyright 2004-2008 Analog Devices Inc.
+ *
+ * Bugs:         Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/usb/musb.h>
+#include <asm/bfin5xx_spi.h>
+#include <asm/cplb.h>
+#include <asm/dma.h>
+#include <asm/gpio.h>
+#include <asm/nand.h>
+#include <asm/portmux.h>
+#include <asm/mach/bf54x_keys.h>
+#include <linux/input.h>
+#include <linux/spi/ad7877.h>
+
+/*
+ * Name the Board for the /proc/cpuinfo
+ */
+const char bfin_board_name[] = "Bluetechnix CM-BF548";
+
+/*
+ *  Driver needs to know address, irq and flag pin.
+ */
+
+#if defined(CONFIG_FB_BF54X_LQ043) || defined(CONFIG_FB_BF54X_LQ043_MODULE)
+
+#include <asm/mach/bf54x-lq043.h>
+
+static struct bfin_bf54xfb_mach_info bf54x_lq043_data = {
+        .width =        480,
+        .height =       272,
+        .xres =         {480, 480, 480},
+        .yres =         {272, 272, 272},
+        .bpp =          {24, 24, 24},
+        .disp =         GPIO_PE3,
+};
+
+static struct resource bf54x_lq043_resources[] = {
+        {
+                .start = IRQ_EPPI0_ERR,
+                .end = IRQ_EPPI0_ERR,
+                .flags = IORESOURCE_IRQ,
+        },
+};
+
+static struct platform_device bf54x_lq043_device = {
+        .name           = "bf54x-lq043",
+        .id             = -1,
+        .num_resources  = ARRAY_SIZE(bf54x_lq043_resources),
+        .resource       = bf54x_lq043_resources,
+        .dev            = {
+                .platform_data = &bf54x_lq043_data,
+        },
+};
+#endif
+
+#if defined(CONFIG_KEYBOARD_BFIN) || defined(CONFIG_KEYBOARD_BFIN_MODULE)
+static unsigned int bf548_keymap[] = {
+        KEYVAL(0, 0, KEY_ENTER),
+        KEYVAL(0, 1, KEY_HELP),
+        KEYVAL(0, 2, KEY_0),
+        KEYVAL(0, 3, KEY_BACKSPACE),
+        KEYVAL(1, 0, KEY_TAB),
+        KEYVAL(1, 1, KEY_9),
+        KEYVAL(1, 2, KEY_8),
+        KEYVAL(1, 3, KEY_7),
+        KEYVAL(2, 0, KEY_DOWN),
+        KEYVAL(2, 1, KEY_6),
+        KEYVAL(2, 2, KEY_5),
+        KEYVAL(2, 3, KEY_4),
+        KEYVAL(3, 0, KEY_UP),
+        KEYVAL(3, 1, KEY_3),
+        KEYVAL(3, 2, KEY_2),
+        KEYVAL(3, 3, KEY_1),
+};
+
+static struct bfin_kpad_platform_data bf54x_kpad_data = {
+        .rows                   = 4,
+        .cols                   = 4,
+        .keymap                 = bf548_keymap,
+        .keymapsize             = ARRAY_SIZE(bf548_keymap),
+        .repeat                 = 0,
+        .debounce_time          = 5000, /* ns (5ms) */
+        .coldrive_time          = 1000, /* ns (1ms) */
+        .keyup_test_interval    = 50, /* ms (50ms) */
+};
+
+static struct resource bf54x_kpad_resources[] = {
+        {
+                .start = IRQ_KEY,
+                .end = IRQ_KEY,
+                .flags = IORESOURCE_IRQ,
+        },
+};
+
+static struct platform_device bf54x_kpad_device = {
+        .name           = "bf54x-keys",
+        .id             = -1,
+        .num_resources  = ARRAY_SIZE(bf54x_kpad_resources),
+        .resource       = bf54x_kpad_resources,
+        .dev            = {
+                .platform_data = &bf54x_kpad_data,
+        },
+};
+#endif
+
+#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+static struct platform_device rtc_device = {
+        .name = "rtc-bfin",
+        .id   = -1,
+};
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+static struct resource bfin_uart_resources[] = {
+#ifdef CONFIG_SERIAL_BFIN_UART0
+        {
+                .start = 0xFFC00400,
+                .end = 0xFFC004FF,
+                .flags = IORESOURCE_MEM,
+        },
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+        {
+                .start = 0xFFC02000,
+                .end = 0xFFC020FF,
+                .flags = IORESOURCE_MEM,
+        },
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART2
+        {
+                .start = 0xFFC02100,
+                .end = 0xFFC021FF,
+                .flags = IORESOURCE_MEM,
+        },
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART3
+        {
+                .start = 0xFFC03100,
+                .end = 0xFFC031FF,
+        },
+#endif
+};
+
+static struct platform_device bfin_uart_device = {
+        .name = "bfin-uart",
+        .id = 1,
+        .num_resources = ARRAY_SIZE(bfin_uart_resources),
+        .resource = bfin_uart_resources,
+};
+#endif
+
+#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
+static struct resource smsc911x_resources[] = {
+        {
+                .name = "smsc911x-memory",
+                .start = 0x24000000,
+                .end = 0x24000000 + 0xFF,
+                .flags = IORESOURCE_MEM,
+        },
+        {
+                .start = IRQ_PE6,
+                .end = IRQ_PE6,
+                .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
+        },
+};
+static struct platform_device smsc911x_device = {
+        .name = "smsc911x",
+        .id = 0,
+        .num_resources = ARRAY_SIZE(smsc911x_resources),
+        .resource = smsc911x_resources,
+};
+#endif
+
+#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
+static struct resource musb_resources[] = {
+        [0] = {
+                .start  = 0xFFC03C00,
+                .end    = 0xFFC040FF,
+                .flags  = IORESOURCE_MEM,
+        },
+        [1] = { /* general IRQ */
+                .start  = IRQ_USB_INT0,
+                .end    = IRQ_USB_INT0,
+                .flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+        },
+        [2] = { /* DMA IRQ */
+                .start  = IRQ_USB_DMA,
+                .end    = IRQ_USB_DMA,
+                .flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+        },
+};
+
+static struct musb_hdrc_platform_data musb_plat = {
+#if defined(CONFIG_USB_MUSB_OTG)
+        .mode           = MUSB_OTG,
+#elif defined(CONFIG_USB_MUSB_HDRC_HCD)
+        .mode           = MUSB_HOST,
+#elif defined(CONFIG_USB_GADGET_MUSB_HDRC)
+        .mode           = MUSB_PERIPHERAL,
+#endif
+        .multipoint     = 0,
+};
+
+static u64 musb_dmamask = ~(u32)0;
+
+static struct platform_device musb_device = {
+        .name           = "musb_hdrc",
+        .id             = 0,
+        .dev = {
+                .dma_mask               = &musb_dmamask,
+                .coherent_dma_mask      = 0xffffffff,
+                .platform_data          = &musb_plat,
+        },
+        .num_resources  = ARRAY_SIZE(musb_resources),
+        .resource       = musb_resources,
+};
+#endif
+
+#if defined(CONFIG_PATA_BF54X) || defined(CONFIG_PATA_BF54X_MODULE)
+static struct resource bfin_atapi_resources[] = {
+        {
+                .start = 0xFFC03800,
+                .end = 0xFFC0386F,
+                .flags = IORESOURCE_MEM,
+        },
+        {
+                .start = IRQ_ATAPI_ERR,
+                .end = IRQ_ATAPI_ERR,
+                .flags = IORESOURCE_IRQ,
+        },
+};
+
+static struct platform_device bfin_atapi_device = {
+        .name = "pata-bf54x",
+        .id = -1,
+        .num_resources = ARRAY_SIZE(bfin_atapi_resources),
+        .resource = bfin_atapi_resources,
+};
+#endif
+
+#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
+static struct mtd_partition partition_info[] = {
+        {
+                .name = "Linux Kernel",
+                .offset = 0,
+                .size = 4 * SIZE_1M,
+        },
+        {
+                .name = "File System",
+                .offset = 4 * SIZE_1M,
+                .size = (256 - 4) * SIZE_1M,
+        },
+};
+
+static struct bf5xx_nand_platform bf5xx_nand_platform = {
+        .page_size = NFC_PG_SIZE_256,
+        .data_width = NFC_NWIDTH_8,
+        .partitions = partition_info,
+        .nr_partitions = ARRAY_SIZE(partition_info),
+        .rd_dly = 3,
+        .wr_dly = 3,
+};
+
+static struct resource bf5xx_nand_resources[] = {
+        {
+                .start = 0xFFC03B00,
+                .end = 0xFFC03B4F,
+                .flags = IORESOURCE_MEM,
+        },
+        {
+                .start = CH_NFC,
+                .end = CH_NFC,
+                .flags = IORESOURCE_IRQ,
+        },
+};
+
+static struct platform_device bf5xx_nand_device = {
+        .name = "bf5xx-nand",
+        .id = 0,
+        .num_resources = ARRAY_SIZE(bf5xx_nand_resources),
+        .resource = bf5xx_nand_resources,
+        .dev = {
+                .platform_data = &bf5xx_nand_platform,
+        },
+};
+#endif
+
+#if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN_MODULE)
+static struct platform_device bf54x_sdh_device = {
+        .name = "bfin-sdh",
+        .id = 0,
+};
+#endif
+
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+/* all SPI peripherals info goes here */
+#if defined(CONFIG_MTD_M25P80) \
+        || defined(CONFIG_MTD_M25P80_MODULE)
+/* SPI flash chip (m25p16) */
+static struct mtd_partition bfin_spi_flash_partitions[] = {
+        {
+                .name = "bootloader",
+                .size = 0x00040000,
+                .offset = 0,
+                .mask_flags = MTD_CAP_ROM
+        }, {
+                .name = "linux kernel",
+                .size = 0x1c0000,
+                .offset = 0x40000
+        }
+};
+
+static struct flash_platform_data bfin_spi_flash_data = {
+        .name = "m25p80",
+        .parts = bfin_spi_flash_partitions,
+        .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
+        .type = "m25p16",
+};
+
+static struct bfin5xx_spi_chip spi_flash_chip_info = {
+        .enable_dma = 0,         /* use dma transfer with this chip*/
+        .bits_per_word = 8,
+        .cs_change_per_word = 0,
+};
+#endif
+
+#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
+static struct bfin5xx_spi_chip spi_ad7877_chip_info = {
+        .cs_change_per_word = 0,
+        .enable_dma = 0,
+        .bits_per_word = 16,
+};
+
+static const struct ad7877_platform_data bfin_ad7877_ts_info = {
+        .model                  = 7877,
+        .vref_delay_usecs       = 50,   /* internal, no capacitor */
+        .x_plate_ohms           = 419,
+        .y_plate_ohms           = 486,
+        .pressure_max           = 1000,
+        .pressure_min           = 0,
+        .stopacq_polarity       = 1,
+        .first_conversion_delay = 3,
+        .acquisition_time       = 1,
+        .averaging              = 1,
+        .pen_down_acc_interval  = 1,
+};
+#endif
+
+#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
+static struct bfin5xx_spi_chip spidev_chip_info = {
+        .enable_dma = 0,
+        .bits_per_word = 8,
+};
+#endif
+
+static struct spi_board_info bf54x_spi_board_info[] __initdata = {
+#if defined(CONFIG_MTD_M25P80) \
+        || defined(CONFIG_MTD_M25P80_MODULE)
+        {
+                /* the modalias must be the same as spi device driver name */
+                .modalias = "m25p80", /* Name of spi_driver for this device */
+                .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
+                .bus_num = 0, /* Framework bus number */
+                .chip_select = 1, /* SPI_SSEL1*/
+                .platform_data = &bfin_spi_flash_data,
+                .controller_data = &spi_flash_chip_info,
+                .mode = SPI_MODE_3,
+        },
+#endif
+#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
+{
+        .modalias               = "ad7877",
+        .platform_data          = &bfin_ad7877_ts_info,
+        .irq                    = IRQ_PJ11,
+        .max_speed_hz           = 12500000,     /* max spi clock (SCK) speed in HZ */
+        .bus_num                = 0,
+        .chip_select            = 2,
+        .controller_data = &spi_ad7877_chip_info,
+},
+#endif
+#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
+        {
+                .modalias = "spidev",
+                .max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
+                .bus_num = 0,
+                .chip_select = 1,
+                .controller_data = &spidev_chip_info,
+        },
+#endif
+};
+
+/* SPI (0) */
+static struct resource bfin_spi0_resource[] = {
+        [0] = {
+                .start = SPI0_REGBASE,
+                .end   = SPI0_REGBASE + 0xFF,
+                .flags = IORESOURCE_MEM,
+        },
+        [1] = {
+                .start = CH_SPI0,
+                .end   = CH_SPI0,
+                .flags = IORESOURCE_IRQ,
+        }
+};
+
+/* SPI (1) */
+static struct resource bfin_spi1_resource[] = {
+        [0] = {
+                .start = SPI1_REGBASE,
+                .end   = SPI1_REGBASE + 0xFF,
+                .flags = IORESOURCE_MEM,
+        },
+        [1] = {
+                .start = CH_SPI1,
+                .end   = CH_SPI1,
+                .flags = IORESOURCE_IRQ,
+        }
+};
+
+/* SPI controller data */
+static struct bfin5xx_spi_master bf54x_spi_master_info0 = {
+        .num_chipselect = 8,
+        .enable_dma = 1,  /* master has the ability to do dma transfer */
+        .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
+};
+
+static struct platform_device bf54x_spi_master0 = {
+        .name = "bfin-spi",
+        .id = 0, /* Bus number */
+        .num_resources = ARRAY_SIZE(bfin_spi0_resource),
+        .resource = bfin_spi0_resource,
+        .dev = {
+                .platform_data = &bf54x_spi_master_info0, /* Passed to driver */
+                },
+};
+
+static struct bfin5xx_spi_master bf54x_spi_master_info1 = {
+        .num_chipselect = 8,
+        .enable_dma = 1,  /* master has the ability to do dma transfer */
+        .pin_req = {P_SPI1_SCK, P_SPI1_MISO, P_SPI1_MOSI, 0},
+};
+
+static struct platform_device bf54x_spi_master1 = {
+        .name = "bfin-spi",
+        .id = 1, /* Bus number */
+        .num_resources = ARRAY_SIZE(bfin_spi1_resource),
+        .resource = bfin_spi1_resource,
+        .dev = {
+                .platform_data = &bf54x_spi_master_info1, /* Passed to driver */
+                },
+};
+#endif  /* spi master and devices */
+
+#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+static struct resource bfin_twi0_resource[] = {
+        [0] = {
+                .start = TWI0_REGBASE,
+                .end   = TWI0_REGBASE + 0xFF,
+                .flags = IORESOURCE_MEM,
+        },
+        [1] = {
+                .start = IRQ_TWI0,
+                .end   = IRQ_TWI0,
+                .flags = IORESOURCE_IRQ,
+        },
+};
+
+static struct platform_device i2c_bfin_twi0_device = {
+        .name = "i2c-bfin-twi",
+        .id = 0,
+        .num_resources = ARRAY_SIZE(bfin_twi0_resource),
+        .resource = bfin_twi0_resource,
+};
+
+#if !defined(CONFIG_BF542)      /* The BF542 only has 1 TWI */
+static struct resource bfin_twi1_resource[] = {
+        [0] = {
+                .start = TWI1_REGBASE,
+                .end   = TWI1_REGBASE + 0xFF,
+                .flags = IORESOURCE_MEM,
+        },
+        [1] = {
+                .start = IRQ_TWI1,
+                .end   = IRQ_TWI1,
+                .flags = IORESOURCE_IRQ,
+        },
+};
+
+static struct platform_device i2c_bfin_twi1_device = {
+        .name = "i2c-bfin-twi",
+        .id = 1,
+        .num_resources = ARRAY_SIZE(bfin_twi1_resource),
+        .resource = bfin_twi1_resource,
+};
+#endif
+#endif
+
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+#include <linux/gpio_keys.h>
+
+static struct gpio_keys_button bfin_gpio_keys_table[] = {
+        {BTN_0, GPIO_PH7, 1, "gpio-keys: BTN0"},
+};
+
+static struct gpio_keys_platform_data bfin_gpio_keys_data = {
+        .buttons        = bfin_gpio_keys_table,
+        .nbuttons       = ARRAY_SIZE(bfin_gpio_keys_table),
+};
+
+static struct platform_device bfin_device_gpiokeys = {
+        .name      = "gpio-keys",
+        .dev = {
+                .platform_data = &bfin_gpio_keys_data,
+        },
+};
+#endif
+
+static struct platform_device *cm_bf548_devices[] __initdata = {
+#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+        &rtc_device,
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+        &bfin_uart_device,
+#endif
+
+#if defined(CONFIG_FB_BF54X_LQ043) || defined(CONFIG_FB_BF54X_LQ043_MODULE)
+        &bf54x_lq043_device,
+#endif
+
+#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
+        &smsc911x_device,
+#endif
+
+#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
+        &musb_device,
+#endif
+
+#if defined(CONFIG_PATA_BF54X) || defined(CONFIG_PATA_BF54X_MODULE)
+        &bfin_atapi_device,
+#endif
+
+#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
+        &bf5xx_nand_device,
+#endif
+
+#if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN_MODULE)
+        &bf54x_sdh_device,
+#endif
+
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+        &bf54x_spi_master0,
+        &bf54x_spi_master1,
+#endif
+
+#if defined(CONFIG_KEYBOARD_BFIN) || defined(CONFIG_KEYBOARD_BFIN_MODULE)
+        &bf54x_kpad_device,
+#endif
+
+#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+/*      &i2c_bfin_twi0_device, */
+#if !defined(CONFIG_BF542)
+        &i2c_bfin_twi1_device,
+#endif
+#endif
+
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+        &bfin_device_gpiokeys,
+#endif
+};
+
+static int __init cm_bf548_init(void)
+{
+        printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__);
+        platform_add_devices(cm_bf548_devices, ARRAY_SIZE(cm_bf548_devices));
+
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+        spi_register_board_info(bf54x_spi_board_info,
+                        ARRAY_SIZE(bf54x_spi_board_info));
+#endif
+
+        return 0;
+}
+
+arch_initcall(cm_bf548_init);