Blackfin arch: update platform driver resource information to all board files

Signed-off-by: Bryan Wu <bryan.wu@analog.com>

4 files changed, 569 insertions, 110 deletions

diff --git a/arch/blackfin/mach-bf537/boards/cm_bf537.c b/arch/blackfin/mach-bf537/boards/cm_bf537.c
index a8f947b72754..44dea05e1d03 100644
--- a/arch/blackfin/mach-bf537/boards/cm_bf537.c
+++ b/arch/blackfin/mach-bf537/boards/cm_bf537.c
@@ -35,7 +35,9 @@
 #include <linux/spi/spi.h>
 #include <linux/spi/flash.h>
 #include <linux/usb_isp1362.h>
+#include <linux/pata_platform.h>
 #include <linux/irq.h>
+#include <asm/dma.h>
 #include <asm/bfin5xx_spi.h>
 
 /*
@@ -113,7 +115,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
                 /* the modalias must be the same as spi device driver name */
                 .modalias = "m25p80", /* Name of spi_driver for this device */
                 .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
-                .bus_num = 1, /* Framework bus number */
+                .bus_num = 0, /* Framework bus number */
                 .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
                 .platform_data = &bfin_spi_flash_data,
                 .controller_data = &spi_flash_chip_info,
@@ -125,7 +127,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
         {
                 .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
                 .max_speed_hz = 6250000,     /* max spi clock (SCK) speed in HZ */
-                .bus_num = 1, /* Framework bus number */
+                .bus_num = 0, /* Framework bus number */
                 .chip_select = 1, /* Framework chip select. */
                 .platform_data = NULL, /* No spi_driver specific config */
                 .controller_data = &spi_adc_chip_info,
@@ -136,7 +138,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
         {
                 .modalias = "ad1836-spi",
                 .max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
-                .bus_num = 1,
+                .bus_num = 0,
                 .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
                 .controller_data = &ad1836_spi_chip_info,
         },
@@ -146,7 +148,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
         {
                 .modalias = "ad9960-spi",
                 .max_speed_hz = 10000000,     /* max spi clock (SCK) speed in HZ */
-                .bus_num = 1,
+                .bus_num = 0,
                 .chip_select = 1,
                 .controller_data = &ad9960_spi_chip_info,
         },
@@ -156,7 +158,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
         {
                 .modalias = "spi_mmc_dummy",
                 .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
-                .bus_num = 1,
+                .bus_num = 0,
                 .chip_select = 7,
                 .platform_data = NULL,
                 .controller_data = &spi_mmc_chip_info,
@@ -165,7 +167,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
         {
                 .modalias = "spi_mmc",
                 .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
-                .bus_num = 1,
+                .bus_num = 0,
                 .chip_select = CONFIG_SPI_MMC_CS_CHAN,
                 .platform_data = NULL,
                 .controller_data = &spi_mmc_chip_info,
@@ -174,17 +176,33 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 #endif
 };
 
+/* SPI (0) */
+static struct resource bfin_spi0_resource[] = {
+        [0] = {
+                .start = SPI0_REGBASE,
+                .end   = SPI0_REGBASE + 0xFF,
+                .flags = IORESOURCE_MEM,
+                },
+        [1] = {
+                .start = CH_SPI,
+                .end   = CH_SPI,
+                .flags = IORESOURCE_IRQ,
+        }
+};
+
 /* SPI controller data */
-static struct bfin5xx_spi_master spi_bfin_master_info = {
+static struct bfin5xx_spi_master bfin_spi0_info = {
         .num_chipselect = 8,
         .enable_dma = 1,  /* master has the ability to do dma transfer */
 };
 
-static struct platform_device spi_bfin_master_device = {
-        .name = "bfin-spi-master",
-        .id = 1, /* Bus number */
+static struct platform_device bfin_spi0_device = {
+        .name = "bfin-spi",
+        .id = 0, /* Bus number */
+        .num_resources = ARRAY_SIZE(bfin_spi0_resource),
+        .resource = bfin_spi0_resource,
         .dev = {
-                .platform_data = &spi_bfin_master_info, /* Passed to driver */
+                .platform_data = &bfin_spi0_info, /* Passed to driver */
         },
 };
 #endif  /* spi master and devices */
@@ -316,6 +334,43 @@ static struct platform_device bfin_mac_device = {
 };
 #endif
 
+#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+#define PATA_INT        64
+
+static struct pata_platform_info bfin_pata_platform_data = {
+        .ioport_shift = 2,
+        .irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED,
+};
+
+static struct resource bfin_pata_resources[] = {
+        {
+                .start = 0x2030C000,
+                .end = 0x2030C01F,
+                .flags = IORESOURCE_MEM,
+        },
+        {
+                .start = 0x2030D018,
+                .end = 0x2030D01B,
+                .flags = IORESOURCE_MEM,
+        },
+        {
+                .start = PATA_INT,
+                .end = PATA_INT,
+                .flags = IORESOURCE_IRQ,
+        },
+};
+
+static struct platform_device bfin_pata_device = {
+        .name = "pata_platform",
+        .id = -1,
+        .num_resources = ARRAY_SIZE(bfin_pata_resources),
+        .resource = bfin_pata_resources,
+        .dev = {
+                .platform_data = &bfin_pata_platform_data,
+        }
+};
+#endif
+
 static struct platform_device *cm_bf537_devices[] __initdata = {
 #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
         &rtc_device,
@@ -347,7 +402,11 @@ static struct platform_device *cm_bf537_devices[] __initdata = {
 #endif
 
 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
-        &spi_bfin_master_device,
+        &bfin_spi0_device,
+#endif
+
+#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+        &bfin_pata_device,
 #endif
 };
 
@@ -358,6 +417,10 @@ static int __init cm_bf537_init(void)
 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
         spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
 #endif
+
+#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+        irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
+#endif
         return 0;
 }
 
diff --git a/arch/blackfin/mach-bf537/boards/generic_board.c b/arch/blackfin/mach-bf537/boards/generic_board.c
index 648d984e98d6..5e9d09eb8579 100644
--- a/arch/blackfin/mach-bf537/boards/generic_board.c
+++ b/arch/blackfin/mach-bf537/boards/generic_board.c
@@ -8,7 +8,7 @@
  *
  * Modified:
  *               Copyright 2005 National ICT Australia (NICTA)
- *               Copyright 2004-2006 Analog Devices Inc.
+ *               Copyright 2004-2007 Analog Devices Inc.
  *
  * Bugs:         Enter bugs at http://blackfin.uclinux.org/
  *
@@ -34,20 +34,74 @@
 #include <linux/mtd/partitions.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/flash.h>
+#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
 #include <linux/usb_isp1362.h>
+#endif
+#include <linux/pata_platform.h>
 #include <linux/irq.h>
+#include <linux/interrupt.h>
 #include <linux/usb_sl811.h>
+#include <asm/dma.h>
 #include <asm/bfin5xx_spi.h>
+#include <asm/reboot.h>
+#include <linux/spi/ad7877.h>
 
 /*
  * Name the Board for the /proc/cpuinfo
  */
-char *bfin_board_name = "UNKNOWN BOARD";
+char *bfin_board_name = "GENERIC Board";
 
 /*
  *  Driver needs to know address, irq and flag pin.
  */
 
+#define ISP1761_BASE       0x203C0000
+#define ISP1761_IRQ        IRQ_PF7
+
+#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
+static struct resource bfin_isp1761_resources[] = {
+        [0] = {
+                .name   = "isp1761-regs",
+                .start  = ISP1761_BASE + 0x00000000,
+                .end    = ISP1761_BASE + 0x000fffff,
+                .flags  = IORESOURCE_MEM,
+        },
+        [1] = {
+                .start  = ISP1761_IRQ,
+                .end    = ISP1761_IRQ,
+                .flags  = IORESOURCE_IRQ,
+        },
+};
+
+static struct platform_device bfin_isp1761_device = {
+        .name           = "isp1761",
+        .id             = 0,
+        .num_resources  = ARRAY_SIZE(bfin_isp1761_resources),
+        .resource       = bfin_isp1761_resources,
+};
+
+static struct platform_device *bfin_isp1761_devices[] = {
+        &bfin_isp1761_device,
+};
+
+int __init bfin_isp1761_init(void)
+{
+        unsigned int num_devices = ARRAY_SIZE(bfin_isp1761_devices);
+
+        printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__);
+        set_irq_type(ISP1761_IRQ, IRQF_TRIGGER_FALLING);
+
+        return platform_add_devices(bfin_isp1761_devices, num_devices);
+}
+
+void __exit bfin_isp1761_exit(void)
+{
+        platform_device_unregister(&bfin_isp1761_device);
+}
+
+arch_initcall(bfin_isp1761_init);
+#endif
+
 #if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
 static struct resource bfin_pcmcia_cf_resources[] = {
         {
@@ -59,10 +113,6 @@ static struct resource bfin_pcmcia_cf_resources[] = {
                 .end = 0x20311FFF,
                 .flags = IORESOURCE_MEM,
         }, {
-                .start = IRQ_PROG_INTA,
-                .end = IRQ_PROG_INTA,
-                .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
-        }, {
                 .start = IRQ_PF4,
                 .end = IRQ_PF4,
                 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
@@ -96,14 +146,7 @@ static struct resource smc91x_resources[] = {
                 .end = 0x20300300 + 16,
                 .flags = IORESOURCE_MEM,
         }, {
-                .start = IRQ_PROG_INTB,
-                .end = IRQ_PROG_INTB,
-                .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
-        }, {
-                /*
-                 *  denotes the flag pin and is used directly if
-                 *  CONFIG_IRQCHIP_DEMUX_GPIO is defined.
-                 */
+
                 .start = IRQ_PF7,
                 .end = IRQ_PF7,
                 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
@@ -117,6 +160,28 @@ static struct platform_device smc91x_device = {
 };
 #endif
 
+#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
+static struct resource dm9000_resources[] = {
+        [0] = {
+                .start  = 0x203FB800,
+                .end    = 0x203FB800 + 8,
+                .flags  = IORESOURCE_MEM,
+        },
+        [1] = {
+                .start  = IRQ_PF9,
+                .end    = IRQ_PF9,
+                .flags  = (IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE),
+        },
+};
+
+static struct platform_device dm9000_device = {
+        .name           = "dm9000",
+        .id             = -1,
+        .num_resources  = ARRAY_SIZE(dm9000_resources),
+        .resource       = dm9000_resources,
+};
+#endif
+
 #if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE)
 static struct resource sl811_hcd_resources[] = {
         {
@@ -128,12 +193,8 @@ static struct resource sl811_hcd_resources[] = {
                 .end = 0x20340004,
                 .flags = IORESOURCE_MEM,
         }, {
-                .start = IRQ_PROG_INTA,
-                .end = IRQ_PROG_INTA,
-                .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
-        }, {
-                .start = IRQ_PF0 + CONFIG_USB_SL811_BFIN_GPIO,
-                .end = IRQ_PF0 + CONFIG_USB_SL811_BFIN_GPIO,
+                .start = CONFIG_USB_SL811_BFIN_IRQ,
+                .end = CONFIG_USB_SL811_BFIN_IRQ,
                 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
         },
 };
@@ -141,21 +202,19 @@ static struct resource sl811_hcd_resources[] = {
 #if defined(CONFIG_USB_SL811_BFIN_USE_VBUS)
 void sl811_port_power(struct device *dev, int is_on)
 {
-        unsigned short mask = (1<<CONFIG_USB_SL811_BFIN_GPIO_VBUS);
-
-        bfin_write_PORT_FER(bfin_read_PORT_FER() & ~mask);
-        bfin_write_FIO_DIR(bfin_read_FIO_DIR() | mask);
+        gpio_request(CONFIG_USB_SL811_BFIN_GPIO_VBUS, "usb:SL811_VBUS");
+        gpio_direction_output(CONFIG_USB_SL811_BFIN_GPIO_VBUS);
 
         if (is_on)
-                bfin_write_FIO_FLAG_S(mask);
+                gpio_set_value(CONFIG_USB_SL811_BFIN_GPIO_VBUS, 1);
         else
-                bfin_write_FIO_FLAG_C(mask);
+                gpio_set_value(CONFIG_USB_SL811_BFIN_GPIO_VBUS, 0);
 }
 #endif
 
 static struct sl811_platform_data sl811_priv = {
         .potpg = 10,
-        .power = 250,           /* == 500mA */
+        .power = 250,       /* == 500mA */
 #if defined(CONFIG_USB_SL811_BFIN_USE_VBUS)
         .port_power = &sl811_port_power,
 #endif
@@ -170,7 +229,6 @@ static struct platform_device sl811_hcd_device = {
         .num_resources = ARRAY_SIZE(sl811_hcd_resources),
         .resource = sl811_hcd_resources,
 };
-
 #endif
 
 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
@@ -184,13 +242,9 @@ static struct resource isp1362_hcd_resources[] = {
                 .end = 0x20360004,
                 .flags = IORESOURCE_MEM,
         }, {
-                .start = IRQ_PROG_INTA,
-                .end = IRQ_PROG_INTA,
+                .start = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ,
+                .end = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ,
                 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
-        }, {
-                .start = IRQ_PF0 + CONFIG_USB_ISP1362_BFIN_GPIO,
-                .end = IRQ_PF0 + CONFIG_USB_ISP1362_BFIN_GPIO,
-                .flags = IORESOURCE_IRQ,
         },
 };
 
@@ -246,7 +300,8 @@ static struct platform_device net2272_bfin_device = {
 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
 /* all SPI peripherals info goes here */
 
-#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
+#if defined(CONFIG_MTD_M25P80) \
+        || defined(CONFIG_MTD_M25P80_MODULE)
 static struct mtd_partition bfin_spi_flash_partitions[] = {
         {
                 .name = "bootloader",
@@ -302,70 +357,198 @@ static struct bfin5xx_spi_chip ad9960_spi_chip_info = {
 };
 #endif
 
+#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+static struct bfin5xx_spi_chip spi_mmc_chip_info = {
+        .enable_dma = 1,
+        .bits_per_word = 8,
+};
+#endif
+
+#if defined(CONFIG_PBX)
+static struct bfin5xx_spi_chip spi_si3xxx_chip_info = {
+        .ctl_reg        = 0x4, /* send zero */
+        .enable_dma     = 0,
+        .bits_per_word  = 8,
+        .cs_change_per_word = 1,
+};
+#endif
+
+#if defined(CONFIG_AD5304) || defined(CONFIG_AD5304_MODULE)
+static struct bfin5xx_spi_chip ad5304_chip_info = {
+        .enable_dma = 0,
+        .bits_per_word = 16,
+};
+#endif
+
+#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
+static struct bfin5xx_spi_chip spi_ad7877_chip_info = {
+        .enable_dma = 0,
+        .bits_per_word = 16,
+};
+
+static const struct ad7877_platform_data bfin_ad7877_ts_info = {
+        .model                  = 7877,
+        .vref_delay_usecs       = 50,   /* internal, no capacitor */
+        .x_plate_ohms           = 419,
+        .y_plate_ohms           = 486,
+        .pressure_max           = 1000,
+        .pressure_min           = 0,
+        .stopacq_polarity       = 1,
+        .first_conversion_delay = 3,
+        .acquisition_time       = 1,
+        .averaging              = 1,
+        .pen_down_acc_interval  = 1,
+};
+#endif
+
 static struct spi_board_info bfin_spi_board_info[] __initdata = {
-#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
+#if defined(CONFIG_MTD_M25P80) \
+        || defined(CONFIG_MTD_M25P80_MODULE)
         {
                 /* the modalias must be the same as spi device driver name */
                 .modalias = "m25p80", /* Name of spi_driver for this device */
                 .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
-                .bus_num = 1, /* Framework bus number */
-                .chip_select = 2, /* Framework chip select. On STAMP537 it is SPISSEL1*/
+                .bus_num = 0, /* Framework bus number */
+                .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
                 .platform_data = &bfin_spi_flash_data,
                 .controller_data = &spi_flash_chip_info,
                 .mode = SPI_MODE_3,
         },
 #endif
 
-#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_SPI_ADC_BF533) \
+        || defined(CONFIG_SPI_ADC_BF533_MODULE)
         {
                 .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
                 .max_speed_hz = 6250000,     /* max spi clock (SCK) speed in HZ */
-                .bus_num = 1, /* Framework bus number */
+                .bus_num = 0, /* Framework bus number */
                 .chip_select = 1, /* Framework chip select. */
                 .platform_data = NULL, /* No spi_driver specific config */
                 .controller_data = &spi_adc_chip_info,
         },
 #endif
 
-#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+#if defined(CONFIG_SND_BLACKFIN_AD1836) \
+        || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
         {
                 .modalias = "ad1836-spi",
                 .max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
-                .bus_num = 1,
+                .bus_num = 0,
                 .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
                 .controller_data = &ad1836_spi_chip_info,
         },
 #endif
-
 #if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)
         {
                 .modalias = "ad9960-spi",
                 .max_speed_hz = 10000000,     /* max spi clock (SCK) speed in HZ */
-                .bus_num = 1,
+                .bus_num = 0,
                 .chip_select = 1,
                 .controller_data = &ad9960_spi_chip_info,
         },
 #endif
+#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+        {
+                .modalias = "spi_mmc_dummy",
+                .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
+                .bus_num = 0,
+                .chip_select = 0,
+                .platform_data = NULL,
+                .controller_data = &spi_mmc_chip_info,
+                .mode = SPI_MODE_3,
+        },
+        {
+                .modalias = "spi_mmc",
+                .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
+                .bus_num = 0,
+                .chip_select = CONFIG_SPI_MMC_CS_CHAN,
+                .platform_data = NULL,
+                .controller_data = &spi_mmc_chip_info,
+                .mode = SPI_MODE_3,
+        },
+#endif
+#if defined(CONFIG_PBX)
+        {
+                .modalias = "fxs-spi",
+                .max_speed_hz = 12500000,     /* max spi clock (SCK) speed in HZ */
+                .bus_num = 0,
+                .chip_select = 8 - CONFIG_J11_JUMPER,
+                .controller_data = &spi_si3xxx_chip_info,
+                .mode = SPI_MODE_3,
+        },
+        {
+                .modalias = "fxo-spi",
+                .max_speed_hz = 12500000,     /* max spi clock (SCK) speed in HZ */
+                .bus_num = 0,
+                .chip_select = 8 - CONFIG_J19_JUMPER,
+                .controller_data = &spi_si3xxx_chip_info,
+                .mode = SPI_MODE_3,
+        },
+#endif
+#if defined(CONFIG_AD5304) || defined(CONFIG_AD5304_MODULE)
+        {
+                .modalias = "ad5304_spi",
+                .max_speed_hz = 1250000,     /* max spi clock (SCK) speed in HZ */
+                .bus_num = 0,
+                .chip_select = 2,
+                .platform_data = NULL,
+                .controller_data = &ad5304_chip_info,
+                .mode = SPI_MODE_2,
+        },
+#endif
+#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
+        {
+                .modalias               = "ad7877",
+                .platform_data          = &bfin_ad7877_ts_info,
+                .irq                    = IRQ_PF6,
+                .max_speed_hz   = 12500000,     /* max spi clock (SCK) speed in HZ */
+                .bus_num        = 1,
+                .chip_select  = 1,
+                .controller_data = &spi_ad7877_chip_info,
+        },
+#endif
 };
 
 /* SPI controller data */
-static struct bfin5xx_spi_master spi_bfin_master_info = {
+static struct bfin5xx_spi_master bfin_spi0_info = {
         .num_chipselect = 8,
         .enable_dma = 1,  /* master has the ability to do dma transfer */
 };
 
-static struct platform_device spi_bfin_master_device = {
-        .name = "bfin-spi-master",
-        .id = 1, /* Bus number */
+/* SPI (0) */
+static struct resource bfin_spi0_resource[] = {
+        [0] = {
+                .start = SPI0_REGBASE,
+                .end   = SPI0_REGBASE + 0xFF,
+                .flags = IORESOURCE_MEM,
+                },
+        [1] = {
+                .start = CH_SPI,
+                .end   = CH_SPI,
+                .flags = IORESOURCE_IRQ,
+        },
+};
+
+static struct platform_device bfin_spi0_device = {
+        .name = "bfin-spi",
+        .id = 0, /* Bus number */
+        .num_resources = ARRAY_SIZE(bfin_spi0_resource),
+        .resource = bfin_spi0_resource,
         .dev = {
-                .platform_data = &spi_bfin_master_info, /* Passed to driver */
+                .platform_data = &bfin_spi0_info, /* Passed to driver */
         },
 };
 #endif  /* spi master and devices */
 
 #if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
 static struct platform_device bfin_fb_device = {
-        .name = "bf537-fb",
+        .name = "bf537-lq035",
+};
+#endif
+
+#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
+static struct platform_device bfin_fb_adv7393_device = {
+        .name = "bfin-adv7393",
 };
 #endif
 
@@ -390,15 +573,86 @@ static struct platform_device bfin_uart_device = {
 };
 #endif
 
-static struct platform_device *stamp_devices[] __initdata = {
-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
-        &rtc_device,
+#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+static struct resource bfin_twi0_resource[] = {
+        [0] = {
+                .start = TWI0_REGBASE,
+                .end   = TWI0_REGBASE + 0xFF,
+                .flags = IORESOURCE_MEM,
+        },
+        [1] = {
+                .start = IRQ_TWI,
+                .end   = IRQ_TWI,
+                .flags = IORESOURCE_IRQ,
+        },
+};
+
+static struct platform_device i2c_bfin_twi_device = {
+        .name = "i2c-bfin-twi",
+        .id = 0,
+        .num_resources = ARRAY_SIZE(bfin_twi0_resource),
+        .resource = bfin_twi0_resource,
+};
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+static struct platform_device bfin_sport0_uart_device = {
+        .name = "bfin-sport-uart",
+        .id = 0,
+};
+
+static struct platform_device bfin_sport1_uart_device = {
+        .name = "bfin-sport-uart",
+        .id = 1,
+};
+#endif
+
+#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+#define PATA_INT        55
+
+static struct pata_platform_info bfin_pata_platform_data = {
+        .ioport_shift = 1,
+        .irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED,
+};
+
+static struct resource bfin_pata_resources[] = {
+        {
+                .start = 0x20314020,
+                .end = 0x2031403F,
+                .flags = IORESOURCE_MEM,
+        },
+        {
+                .start = 0x2031401C,
+                .end = 0x2031401F,
+                .flags = IORESOURCE_MEM,
+        },
+        {
+                .start = PATA_INT,
+                .end = PATA_INT,
+                .flags = IORESOURCE_IRQ,
+        },
+};
+
+static struct platform_device bfin_pata_device = {
+        .name = "pata_platform",
+        .id = -1,
+        .num_resources = ARRAY_SIZE(bfin_pata_resources),
+        .resource = bfin_pata_resources,
+        .dev = {
+                .platform_data = &bfin_pata_platform_data,
+        }
+};
 #endif
 
+static struct platform_device *stamp_devices[] __initdata = {
 #if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
         &bfin_pcmcia_cf_device,
 #endif
 
+#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+        &rtc_device,
+#endif
+
 #if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE)
         &sl811_hcd_device,
 #endif
@@ -411,6 +665,10 @@ static struct platform_device *stamp_devices[] __initdata = {
         &smc91x_device,
 #endif
 
+#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
+        &dm9000_device,
+#endif
+
 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
         &bfin_mac_device,
 #endif
@@ -420,16 +678,33 @@ static struct platform_device *stamp_devices[] __initdata = {
 #endif
 
 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
-        &spi_bfin_master_device,
+        &bfin_spi0_device,
 #endif
 
 #if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
         &bfin_fb_device,
 #endif
 
+#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
+        &bfin_fb_adv7393_device,
+#endif
+
 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
         &bfin_uart_device,
 #endif
+
+#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+        &i2c_bfin_twi_device,
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+        &bfin_sport0_uart_device,
+        &bfin_sport1_uart_device,
+#endif
+
+#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+        &bfin_pata_device,
+#endif
 };
 
 static int __init stamp_init(void)
@@ -437,9 +712,21 @@ static int __init stamp_init(void)
         printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__);
         platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
-        spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
+        spi_register_board_info(bfin_spi_board_info,
+                                ARRAY_SIZE(bfin_spi_board_info));
+#endif
+
+#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+        irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
 #endif
         return 0;
 }
 
 arch_initcall(stamp_init);
+
+void native_machine_restart(char *cmd)
+{
+        /* workaround reboot hang when booting from SPI */
+        if ((bfin_read_SYSCR() & 0x7) == 0x3)
+                bfin_gpio_reset_spi0_ssel1();
+}
diff --git a/arch/blackfin/mach-bf537/boards/pnav10.c b/arch/blackfin/mach-bf537/boards/pnav10.c
index 8806f1230f2d..20507e92a3a4 100644
--- a/arch/blackfin/mach-bf537/boards/pnav10.c
+++ b/arch/blackfin/mach-bf537/boards/pnav10.c
@@ -38,6 +38,7 @@
 #include <linux/usb_isp1362.h>
 #endif
 #include <linux/irq.h>
+#include <asm/dma.h>
 #include <asm/bfin5xx_spi.h>
 #include <linux/usb_sl811.h>
 
@@ -130,15 +131,13 @@ static struct resource sl811_hcd_resources[] = {
 #if defined(CONFIG_USB_SL811_BFIN_USE_VBUS)
 void sl811_port_power(struct device *dev, int is_on)
 {
-        unsigned short mask = (1 << CONFIG_USB_SL811_BFIN_GPIO_VBUS);
-
-        bfin_write_PORT_FER(bfin_read_PORT_FER() & ~mask);
-        bfin_write_FIO_DIR(bfin_read_FIO_DIR() | mask);
+        gpio_request(CONFIG_USB_SL811_BFIN_GPIO_VBUS, "usb:SL811_VBUS");
+        gpio_direction_output(CONFIG_USB_SL811_BFIN_GPIO_VBUS);
 
         if (is_on)
-                bfin_write_FIO_FLAG_S(mask);
+                gpio_set_value(CONFIG_USB_SL811_BFIN_GPIO_VBUS, 1);
         else
-                bfin_write_FIO_FLAG_C(mask);
+                gpio_set_value(CONFIG_USB_SL811_BFIN_GPIO_VBUS, 0);
 }
 #endif
 
@@ -323,7 +322,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
                 /* the modalias must be the same as spi device driver name */
                 .modalias = "m25p80", /* Name of spi_driver for this device */
                 .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
-                .bus_num = 1, /* Framework bus number */
+                .bus_num = 0, /* Framework bus number */
                 .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
                 .platform_data = &bfin_spi_flash_data,
                 .controller_data = &spi_flash_chip_info,
@@ -336,7 +335,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
         {
                 .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
                 .max_speed_hz = 6250000,     /* max spi clock (SCK) speed in HZ */
-                .bus_num = 1, /* Framework bus number */
+                .bus_num = 0, /* Framework bus number */
                 .chip_select = 1, /* Framework chip select. */
                 .platform_data = NULL, /* No spi_driver specific config */
                 .controller_data = &spi_adc_chip_info,
@@ -348,7 +347,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
         {
                 .modalias = "ad1836-spi",
                 .max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
-                .bus_num = 1,
+                .bus_num = 0,
                 .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
                 .controller_data = &ad1836_spi_chip_info,
         },
@@ -357,7 +356,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
         {
                 .modalias = "ad9960-spi",
                 .max_speed_hz = 10000000,     /* max spi clock (SCK) speed in HZ */
-                .bus_num = 1,
+                .bus_num = 0,
                 .chip_select = 1,
                 .controller_data = &ad9960_spi_chip_info,
         },
@@ -366,7 +365,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
         {
                 .modalias = "spi_mmc_dummy",
                 .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
-                .bus_num = 1,
+                .bus_num = 0,
                 .chip_select = 7,
                 .platform_data = NULL,
                 .controller_data = &spi_mmc_chip_info,
@@ -375,7 +374,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
         {
                 .modalias = "spi_mmc",
                 .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
-                .bus_num = 1,
+                .bus_num = 0,
                 .chip_select = CONFIG_SPI_MMC_CS_CHAN,
                 .platform_data = NULL,
                 .controller_data = &spi_mmc_chip_info,
@@ -396,24 +395,40 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 
 };
 
+/* SPI (0) */
+static struct resource bfin_spi0_resource[] = {
+        [0] = {
+                .start = SPI0_REGBASE,
+                .end   = SPI0_REGBASE + 0xFF,
+                .flags = IORESOURCE_MEM,
+                },
+        [1] = {
+                .start = CH_SPI,
+                .end   = CH_SPI,
+                .flags = IORESOURCE_IRQ,
+        }
+};
+
 /* SPI controller data */
-static struct bfin5xx_spi_master spi_bfin_master_info = {
+static struct bfin5xx_spi_master bfin_spi0_info = {
         .num_chipselect = 8,
         .enable_dma = 1,  /* master has the ability to do dma transfer */
 };
 
-static struct platform_device spi_bfin_master_device = {
-        .name = "bfin-spi-master",
-        .id = 1, /* Bus number */
+static struct platform_device bfin_spi0_device = {
+        .name = "bfin-spi",
+        .id = 0, /* Bus number */
+        .num_resources = ARRAY_SIZE(bfin_spi0_resource),
+        .resource = bfin_spi0_resource,
         .dev = {
-                .platform_data = &spi_bfin_master_info, /* Passed to driver */
+                .platform_data = &bfin_spi0_info, /* Passed to driver */
         },
 };
 #endif  /* spi master and devices */
 
 #if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
 static struct platform_device bfin_fb_device = {
-        .name = "bf537-fb",
+        .name = "bf537-lq035",
 };
 #endif
 
@@ -469,7 +484,7 @@ static struct platform_device *stamp_devices[] __initdata = {
 #endif
 
 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
-        &spi_bfin_master_device,
+        &bfin_spi0_device,
 #endif
 
 #if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c
index 9c43d7756510..47d7d4a0e73d 100644
--- a/arch/blackfin/mach-bf537/boards/stamp.c
+++ b/arch/blackfin/mach-bf537/boards/stamp.c
@@ -37,10 +37,13 @@
 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
 #include <linux/usb_isp1362.h>
 #endif
+#include <linux/pata_platform.h>
 #include <linux/irq.h>
 #include <linux/interrupt.h>
 #include <linux/usb_sl811.h>
+#include <asm/dma.h>
 #include <asm/bfin5xx_spi.h>
+#include <asm/reboot.h>
 #include <linux/spi/ad7877.h>
 
 /*
@@ -199,15 +202,13 @@ static struct resource sl811_hcd_resources[] = {
 #if defined(CONFIG_USB_SL811_BFIN_USE_VBUS)
 void sl811_port_power(struct device *dev, int is_on)
 {
-        unsigned short mask = (1 << CONFIG_USB_SL811_BFIN_GPIO_VBUS);
-
-        bfin_write_PORT_FER(bfin_read_PORT_FER() & ~mask);
-        bfin_write_FIO_DIR(bfin_read_FIO_DIR() | mask);
+        gpio_request(CONFIG_USB_SL811_BFIN_GPIO_VBUS, "usb:SL811_VBUS");
+        gpio_direction_output(CONFIG_USB_SL811_BFIN_GPIO_VBUS);
 
         if (is_on)
-                bfin_write_FIO_FLAG_S(mask);
+                gpio_set_value(CONFIG_USB_SL811_BFIN_GPIO_VBUS, 1);
         else
-                bfin_write_FIO_FLAG_C(mask);
+                gpio_set_value(CONFIG_USB_SL811_BFIN_GPIO_VBUS, 0);
 }
 #endif
 
@@ -407,7 +408,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
                 /* the modalias must be the same as spi device driver name */
                 .modalias = "m25p80", /* Name of spi_driver for this device */
                 .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
-                .bus_num = 1, /* Framework bus number */
+                .bus_num = 0, /* Framework bus number */
                 .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
                 .platform_data = &bfin_spi_flash_data,
                 .controller_data = &spi_flash_chip_info,
@@ -420,7 +421,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
         {
                 .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
                 .max_speed_hz = 6250000,     /* max spi clock (SCK) speed in HZ */
-                .bus_num = 1, /* Framework bus number */
+                .bus_num = 0, /* Framework bus number */
                 .chip_select = 1, /* Framework chip select. */
                 .platform_data = NULL, /* No spi_driver specific config */
                 .controller_data = &spi_adc_chip_info,
@@ -432,7 +433,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
         {
                 .modalias = "ad1836-spi",
                 .max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
-                .bus_num = 1,
+                .bus_num = 0,
                 .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
                 .controller_data = &ad1836_spi_chip_info,
         },
@@ -441,7 +442,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
         {
                 .modalias = "ad9960-spi",
                 .max_speed_hz = 10000000,     /* max spi clock (SCK) speed in HZ */
-                .bus_num = 1,
+                .bus_num = 0,
                 .chip_select = 1,
                 .controller_data = &ad9960_spi_chip_info,
         },
@@ -450,7 +451,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
         {
                 .modalias = "spi_mmc_dummy",
                 .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
-                .bus_num = 1,
+                .bus_num = 0,
                 .chip_select = 0,
                 .platform_data = NULL,
                 .controller_data = &spi_mmc_chip_info,
@@ -459,7 +460,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
         {
                 .modalias = "spi_mmc",
                 .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
-                .bus_num = 1,
+                .bus_num = 0,
                 .chip_select = CONFIG_SPI_MMC_CS_CHAN,
                 .platform_data = NULL,
                 .controller_data = &spi_mmc_chip_info,
@@ -470,16 +471,16 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
         {
                 .modalias = "fxs-spi",
                 .max_speed_hz = 12500000,     /* max spi clock (SCK) speed in HZ */
-                .bus_num = 1,
-                .chip_select = 3,
+                .bus_num = 0,
+                .chip_select = 8 - CONFIG_J11_JUMPER,
                 .controller_data = &spi_si3xxx_chip_info,
                 .mode = SPI_MODE_3,
         },
         {
                 .modalias = "fxo-spi",
                 .max_speed_hz = 12500000,     /* max spi clock (SCK) speed in HZ */
-                .bus_num = 1,
-                .chip_select = 2,
+                .bus_num = 0,
+                .chip_select = 8 - CONFIG_J19_JUMPER,
                 .controller_data = &spi_si3xxx_chip_info,
                 .mode = SPI_MODE_3,
         },
@@ -488,7 +489,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
         {
                 .modalias = "ad5304_spi",
                 .max_speed_hz = 1250000,     /* max spi clock (SCK) speed in HZ */
-                .bus_num = 1,
+                .bus_num = 0,
                 .chip_select = 2,
                 .platform_data = NULL,
                 .controller_data = &ad5304_chip_info,
@@ -509,23 +510,45 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 };
 
 /* SPI controller data */
-static struct bfin5xx_spi_master spi_bfin_master_info = {
+static struct bfin5xx_spi_master bfin_spi0_info = {
         .num_chipselect = 8,
         .enable_dma = 1,  /* master has the ability to do dma transfer */
 };
 
-static struct platform_device spi_bfin_master_device = {
-        .name = "bfin-spi-master",
-        .id = 1, /* Bus number */
+/* SPI (0) */
+static struct resource bfin_spi0_resource[] = {
+        [0] = {
+                .start = SPI0_REGBASE,
+                .end   = SPI0_REGBASE + 0xFF,
+                .flags = IORESOURCE_MEM,
+                },
+        [1] = {
+                .start = CH_SPI,
+                .end   = CH_SPI,
+                .flags = IORESOURCE_IRQ,
+        },
+};
+
+static struct platform_device bfin_spi0_device = {
+        .name = "bfin-spi",
+        .id = 0, /* Bus number */
+        .num_resources = ARRAY_SIZE(bfin_spi0_resource),
+        .resource = bfin_spi0_resource,
         .dev = {
-                .platform_data = &spi_bfin_master_info, /* Passed to driver */
+                .platform_data = &bfin_spi0_info, /* Passed to driver */
         },
 };
 #endif  /* spi master and devices */
 
 #if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
 static struct platform_device bfin_fb_device = {
-        .name = "bf537-fb",
+        .name = "bf537-lq035",
+};
+#endif
+
+#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
+static struct platform_device bfin_fb_adv7393_device = {
+        .name = "bfin-adv7393",
 };
 #endif
 
@@ -551,9 +574,24 @@ static struct platform_device bfin_uart_device = {
 #endif
 
 #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+static struct resource bfin_twi0_resource[] = {
+        [0] = {
+                .start = TWI0_REGBASE,
+                .end   = TWI0_REGBASE,
+                .flags = IORESOURCE_MEM,
+        },
+        [1] = {
+                .start = IRQ_TWI,
+                .end   = IRQ_TWI,
+                .flags = IORESOURCE_IRQ,
+        },
+};
+
 static struct platform_device i2c_bfin_twi_device = {
         .name = "i2c-bfin-twi",
         .id = 0,
+        .num_resources = ARRAY_SIZE(bfin_twi0_resource),
+        .resource = bfin_twi0_resource,
 };
 #endif
 
@@ -569,6 +607,43 @@ static struct platform_device bfin_sport1_uart_device = {
 };
 #endif
 
+#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+#define PATA_INT        55
+
+static struct pata_platform_info bfin_pata_platform_data = {
+        .ioport_shift = 1,
+        .irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED,
+};
+
+static struct resource bfin_pata_resources[] = {
+        {
+                .start = 0x20314020,
+                .end = 0x2031403F,
+                .flags = IORESOURCE_MEM,
+        },
+        {
+                .start = 0x2031401C,
+                .end = 0x2031401F,
+                .flags = IORESOURCE_MEM,
+        },
+        {
+                .start = PATA_INT,
+                .end = PATA_INT,
+                .flags = IORESOURCE_IRQ,
+        },
+};
+
+static struct platform_device bfin_pata_device = {
+        .name = "pata_platform",
+        .id = -1,
+        .num_resources = ARRAY_SIZE(bfin_pata_resources),
+        .resource = bfin_pata_resources,
+        .dev = {
+                .platform_data = &bfin_pata_platform_data,
+        }
+};
+#endif
+
 static struct platform_device *stamp_devices[] __initdata = {
 #if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
         &bfin_pcmcia_cf_device,
@@ -603,13 +678,17 @@ static struct platform_device *stamp_devices[] __initdata = {
 #endif
 
 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
-        &spi_bfin_master_device,
+        &bfin_spi0_device,
 #endif
 
 #if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
         &bfin_fb_device,
 #endif
 
+#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
+        &bfin_fb_adv7393_device,
+#endif
+
 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
         &bfin_uart_device,
 #endif
@@ -622,6 +701,10 @@ static struct platform_device *stamp_devices[] __initdata = {
         &bfin_sport0_uart_device,
         &bfin_sport1_uart_device,
 #endif
+
+#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+        &bfin_pata_device,
+#endif
 };
 
 static int __init stamp_init(void)
@@ -632,7 +715,18 @@ static int __init stamp_init(void)
         spi_register_board_info(bfin_spi_board_info,
                                 ARRAY_SIZE(bfin_spi_board_info));
 #endif
+
+#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+        irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
+#endif
         return 0;
 }
 
 arch_initcall(stamp_init);
+
+void native_machine_restart(char *cmd)
+{
+        /* workaround reboot hang when booting from SPI */
+        if ((bfin_read_SYSCR() & 0x7) == 0x3)
+                bfin_gpio_reset_spi0_ssel1();
+}