Blackfin: bf548-ezkit/bf537-stamp: add resources for ADXL345/346

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>

1 files changed, 44 insertions, 0 deletions

diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c
index f56289a66ff2..dfb5036f8a6b 100644
--- a/arch/blackfin/mach-bf537/boards/stamp.c
+++ b/arch/blackfin/mach-bf537/boards/stamp.c
@@ -607,6 +607,43 @@ static const struct ad7879_platform_data bfin_ad7879_ts_info = {
 };
 #endif
 
+#if defined(CONFIG_INPUT_ADXL34X) || defined(CONFIG_INPUT_ADXL34X_MODULE)
+#include <linux/input.h>
+#include <linux/spi/adxl34x.h>
+static const struct adxl34x_platform_data adxl34x_info = {
+        .x_axis_offset = 0,
+        .y_axis_offset = 0,
+        .z_axis_offset = 0,
+        .tap_threshold = 0x31,
+        .tap_duration = 0x10,
+        .tap_latency = 0x60,
+        .tap_window = 0xF0,
+        .tap_axis_control = ADXL_TAP_X_EN | ADXL_TAP_Y_EN | ADXL_TAP_Z_EN,
+        .act_axis_control = 0xFF,
+        .activity_threshold = 5,
+        .inactivity_threshold = 3,
+        .inactivity_time = 4,
+        .free_fall_threshold = 0x7,
+        .free_fall_time = 0x20,
+        .data_rate = 0x8,
+        .data_range = ADXL_FULL_RES,
+
+        .ev_type = EV_ABS,
+        .ev_code_x = ABS_X,             /* EV_REL */
+        .ev_code_y = ABS_Y,             /* EV_REL */
+        .ev_code_z = ABS_Z,             /* EV_REL */
+
+        .ev_code_tap_x = BTN_TOUCH,             /* EV_KEY */
+        .ev_code_tap_y = BTN_TOUCH,             /* EV_KEY */
+        .ev_code_tap_z = BTN_TOUCH,             /* EV_KEY */
+
+/*      .ev_code_ff = KEY_F,*/          /* EV_KEY */
+/*      .ev_code_act_inactivity = KEY_A,*/      /* EV_KEY */
+        .power_mode = ADXL_AUTO_SLEEP | ADXL_LINK,
+        .fifo_mode = ADXL_FIFO_STREAM,
+};
+#endif
+
 #if defined(CONFIG_TOUCHSCREEN_AD7879_SPI) || defined(CONFIG_TOUCHSCREEN_AD7879_SPI_MODULE)
 static struct bfin5xx_spi_chip spi_ad7879_chip_info = {
         .enable_dma = 0,
@@ -1312,6 +1349,13 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
                 .platform_data = (void *)&adp5520_pdev_data,
         },
 #endif
+#if defined(CONFIG_INPUT_ADXL34X_I2C) || defined(CONFIG_INPUT_ADXL34X_I2C_MODULE)
+        {
+                I2C_BOARD_INFO("adxl34x", 0x53),
+                .irq = IRQ_PG3,
+                .platform_data = (void *)&adxl34x_info,
+        },
+#endif
 };
 
 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)