aboutsummaryrefslogtreecommitdiffstats
path: root/arch/blackfin/mach-bf533
diff options
context:
space:
mode:
authorBryan Wu <bryan.wu@analog.com>2007-05-06 17:50:22 -0400
committerLinus Torvalds <torvalds@woody.linux-foundation.org>2007-05-07 15:12:58 -0400
commit1394f03221790a988afc3e4b3cb79f2e477246a9 (patch)
tree2c1963c9a4f2d84a5e021307fde240c5d567cf70 /arch/blackfin/mach-bf533
parent73243284463a761e04d69d22c7516b2be7de096c (diff)
blackfin architecture
This adds support for the Analog Devices Blackfin processor architecture, and currently supports the BF533, BF532, BF531, BF537, BF536, BF534, and BF561 (Dual Core) devices, with a variety of development platforms including those avaliable from Analog Devices (BF533-EZKit, BF533-STAMP, BF537-STAMP, BF561-EZKIT), and Bluetechnix! Tinyboards. The Blackfin architecture was jointly developed by Intel and Analog Devices Inc. (ADI) as the Micro Signal Architecture (MSA) core and introduced it in December of 2000. Since then ADI has put this core into its Blackfin processor family of devices. The Blackfin core has the advantages of a clean, orthogonal,RISC-like microprocessor instruction set. It combines a dual-MAC (Multiply/Accumulate), state-of-the-art signal processing engine and single-instruction, multiple-data (SIMD) multimedia capabilities into a single instruction-set architecture. The Blackfin architecture, including the instruction set, is described by the ADSP-BF53x/BF56x Blackfin Processor Programming Reference http://blackfin.uclinux.org/gf/download/frsrelease/29/2549/Blackfin_PRM.pdf The Blackfin processor is already supported by major releases of gcc, and there are binary and source rpms/tarballs for many architectures at: http://blackfin.uclinux.org/gf/project/toolchain/frs There is complete documentation, including "getting started" guides available at: http://docs.blackfin.uclinux.org/ which provides links to the sources and patches you will need in order to set up a cross-compiling environment for bfin-linux-uclibc This patch, as well as the other patches (toolchain, distribution, uClibc) are actively supported by Analog Devices Inc, at: http://blackfin.uclinux.org/ We have tested this on LTP, and our test plan (including pass/fails) can be found at: http://docs.blackfin.uclinux.org/doku.php?id=testing_the_linux_kernel [m.kozlowski@tuxland.pl: balance parenthesis in blackfin header files] Signed-off-by: Bryan Wu <bryan.wu@analog.com> Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: Aubrey Li <aubrey.li@analog.com> Signed-off-by: Jie Zhang <jie.zhang@analog.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Diffstat (limited to 'arch/blackfin/mach-bf533')
-rw-r--r--arch/blackfin/mach-bf533/Kconfig92
-rw-r--r--arch/blackfin/mach-bf533/Makefile9
-rw-r--r--arch/blackfin/mach-bf533/boards/Makefile8
-rw-r--r--arch/blackfin/mach-bf533/boards/cm_bf533.c267
-rw-r--r--arch/blackfin/mach-bf533/boards/ezkit.c224
-rw-r--r--arch/blackfin/mach-bf533/boards/generic_board.c95
-rw-r--r--arch/blackfin/mach-bf533/boards/stamp.c321
-rw-r--r--arch/blackfin/mach-bf533/cpu.c161
-rw-r--r--arch/blackfin/mach-bf533/head.S774
-rw-r--r--arch/blackfin/mach-bf533/ints-priority.c65
10 files changed, 2016 insertions, 0 deletions
diff --git a/arch/blackfin/mach-bf533/Kconfig b/arch/blackfin/mach-bf533/Kconfig
new file mode 100644
index 000000000000..14297b3ed5c3
--- /dev/null
+++ b/arch/blackfin/mach-bf533/Kconfig
@@ -0,0 +1,92 @@
1if (BF533 || BF532 || BF531)
2
3menu "BF533/2/1 Specific Configuration"
4
5comment "Interrupt Priority Assignment"
6menu "Priority"
7
8config UART_ERROR
9 int "UART ERROR"
10 default 7
11config SPORT0_ERROR
12 int "SPORT0 ERROR"
13 default 7
14config SPI_ERROR
15 int "SPI ERROR"
16 default 7
17config SPORT1_ERROR
18 int "SPORT1 ERROR"
19 default 7
20config PPI_ERROR
21 int "PPI ERROR"
22 default 7
23config DMA_ERROR
24 int "DMA ERROR"
25 default 7
26config PLLWAKE_ERROR
27 int "PLL WAKEUP ERROR"
28 default 7
29
30config RTC_ERROR
31 int "RTC ERROR"
32 default 8
33config DMA0_PPI
34 int "DMA0 PPI"
35 default 8
36
37config DMA1_SPORT0RX
38 int "DMA1 (SPORT0 RX)"
39 default 9
40config DMA2_SPORT0TX
41 int "DMA2 (SPORT0 TX)"
42 default 9
43config DMA3_SPORT1RX
44 int "DMA3 (SPORT1 RX)"
45 default 9
46config DMA4_SPORT1TX
47 int "DMA4 (SPORT1 TX)"
48 default 9
49config DMA5_SPI
50 int "DMA5 (SPI)"
51 default 10
52config DMA6_UARTRX
53 int "DMA6 (UART0 RX)"
54 default 10
55config DMA7_UARTTX
56 int "DMA7 (UART0 TX)"
57 default 10
58config TIMER0
59 int "TIMER0"
60 default 11
61config TIMER1
62 int "TIMER1"
63 default 11
64config TIMER2
65 int "TIMER2"
66 default 11
67config PFA
68 int "PF Interrupt A"
69 default 12
70config PFB
71 int "PF Interrupt B"
72 default 12
73config MEMDMA0
74 int "MEMORY DMA0"
75 default 13
76config MEMDMA1
77 int "MEMORY DMA1"
78 default 13
79config WDTIMER
80 int "WATCH DOG TIMER"
81 default 13
82
83 help
84 Enter the priority numbers between 7-13 ONLY. Others are Reserved.
85 This applies to all the above. It is not recommended to assign the
86 highest priority number 7 to UART or any other device.
87
88endmenu
89
90endmenu
91
92endif
diff --git a/arch/blackfin/mach-bf533/Makefile b/arch/blackfin/mach-bf533/Makefile
new file mode 100644
index 000000000000..76d2c2b8579a
--- /dev/null
+++ b/arch/blackfin/mach-bf533/Makefile
@@ -0,0 +1,9 @@
1#
2# arch/blackfin/mach-bf533/Makefile
3#
4
5extra-y := head.o
6
7obj-y := ints-priority.o
8
9obj-$(CONFIG_CPU_FREQ_BF533) += cpu.o
diff --git a/arch/blackfin/mach-bf533/boards/Makefile b/arch/blackfin/mach-bf533/boards/Makefile
new file mode 100644
index 000000000000..12a631ab389d
--- /dev/null
+++ b/arch/blackfin/mach-bf533/boards/Makefile
@@ -0,0 +1,8 @@
1#
2# arch/blackfin/mach-bf533/boards/Makefile
3#
4
5obj-$(CONFIG_GENERIC_BOARD) += generic_board.o
6obj-$(CONFIG_BFIN533_STAMP) += stamp.o
7obj-$(CONFIG_BFIN533_EZKIT) += ezkit.o
8obj-$(CONFIG_BFIN533_BLUETECHNIX_CM) += cm_bf533.o
diff --git a/arch/blackfin/mach-bf533/boards/cm_bf533.c b/arch/blackfin/mach-bf533/boards/cm_bf533.c
new file mode 100644
index 000000000000..23a7f607df3f
--- /dev/null
+++ b/arch/blackfin/mach-bf533/boards/cm_bf533.c
@@ -0,0 +1,267 @@
1/*
2 * File: arch/blackfin/mach-bf533/boards/cm_bf533.c
3 * Based on: arch/blackfin/mach-bf533/boards/ezkit.c
4 * Author: Aidan Williams <aidan@nicta.com.au> Copright 2005
5 *
6 * Created: 2005
7 * Description: Board description file
8 *
9 * Modified:
10 * Copyright 2004-2006 Analog Devices Inc.
11 *
12 * Bugs: Enter bugs at http://blackfin.uclinux.org/
13 *
14 * This program is free software; you can redistribute it and/or modify
15 * it under the terms of the GNU General Public License as published by
16 * the Free Software Foundation; either version 2 of the License, or
17 * (at your option) any later version.
18 *
19 * This program is distributed in the hope that it will be useful,
20 * but WITHOUT ANY WARRANTY; without even the implied warranty of
21 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
22 * GNU General Public License for more details.
23 *
24 * You should have received a copy of the GNU General Public License
25 * along with this program; if not, see the file COPYING, or write
26 * to the Free Software Foundation, Inc.,
27 * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
28 */
29
30#include <linux/device.h>
31#include <linux/platform_device.h>
32#include <linux/mtd/mtd.h>
33#include <linux/mtd/partitions.h>
34#include <linux/spi/spi.h>
35#include <linux/spi/flash.h>
36#include <linux/usb_isp1362.h>
37#include <asm/irq.h>
38#include <asm/bfin5xx_spi.h>
39
40/*
41 * Name the Board for the /proc/cpuinfo
42 */
43char *bfin_board_name = "Bluetechnix CM BF533";
44
45#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
46/* all SPI peripherals info goes here */
47
48static struct mtd_partition bfin_spi_flash_partitions[] = {
49 {
50 .name = "bootloader",
51 .size = 0x00020000,
52 .offset = 0,
53 .mask_flags = MTD_CAP_ROM
54 },{
55 .name = "kernel",
56 .size = 0xe0000,
57 .offset = 0x20000
58 },{
59 .name = "file system",
60 .size = 0x700000,
61 .offset = 0x00100000,
62 }
63};
64
65static struct flash_platform_data bfin_spi_flash_data = {
66 .name = "m25p80",
67 .parts = bfin_spi_flash_partitions,
68 .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
69 .type = "m25p64",
70};
71
72/* SPI flash chip (m25p64) */
73static struct bfin5xx_spi_chip spi_flash_chip_info = {
74 .enable_dma = 0, /* use dma transfer with this chip*/
75 .bits_per_word = 8,
76};
77
78/* SPI ADC chip */
79static struct bfin5xx_spi_chip spi_adc_chip_info = {
80 .enable_dma = 1, /* use dma transfer with this chip*/
81 .bits_per_word = 16,
82};
83
84#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
85static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
86 .enable_dma = 0,
87 .bits_per_word = 16,
88};
89#endif
90
91static struct spi_board_info bfin_spi_board_info[] __initdata = {
92 {
93 /* the modalias must be the same as spi device driver name */
94 .modalias = "m25p80", /* Name of spi_driver for this device */
95 .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
96 .bus_num = 1, /* Framework bus number */
97 .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
98 .platform_data = &bfin_spi_flash_data,
99 .controller_data = &spi_flash_chip_info,
100 .mode = SPI_MODE_3,
101 },{
102 .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
103 .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */
104 .bus_num = 1, /* Framework bus number */
105 .chip_select = 2, /* Framework chip select. */
106 .platform_data = NULL, /* No spi_driver specific config */
107 .controller_data = &spi_adc_chip_info,
108 },
109#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
110 {
111 .modalias = "ad1836-spi",
112 .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
113 .bus_num = 1,
114 .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
115 .controller_data = &ad1836_spi_chip_info,
116 },
117#endif
118};
119
120/* SPI controller data */
121static struct bfin5xx_spi_master spi_bfin_master_info = {
122 .num_chipselect = 8,
123 .enable_dma = 1, /* master has the ability to do dma transfer */
124};
125
126static struct platform_device spi_bfin_master_device = {
127 .name = "bfin-spi-master",
128 .id = 1, /* Bus number */
129 .dev = {
130 .platform_data = &spi_bfin_master_info, /* Passed to driver */
131 },
132};
133#endif /* spi master and devices */
134
135#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
136static struct platform_device rtc_device = {
137 .name = "rtc-bfin",
138 .id = -1,
139};
140#endif
141
142#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
143static struct resource smc91x_resources[] = {
144 {
145 .start = 0x20200300,
146 .end = 0x20200300 + 16,
147 .flags = IORESOURCE_MEM,
148 },{
149 .start = IRQ_PF0,
150 .end = IRQ_PF0,
151 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
152 },
153};
154static struct platform_device smc91x_device = {
155 .name = "smc91x",
156 .id = 0,
157 .num_resources = ARRAY_SIZE(smc91x_resources),
158 .resource = smc91x_resources,
159};
160#endif
161
162#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
163static struct resource bfin_uart_resources[] = {
164 {
165 .start = 0xFFC00400,
166 .end = 0xFFC004FF,
167 .flags = IORESOURCE_MEM,
168 },
169};
170
171static struct platform_device bfin_uart_device = {
172 .name = "bfin-uart",
173 .id = 1,
174 .num_resources = ARRAY_SIZE(bfin_uart_resources),
175 .resource = bfin_uart_resources,
176};
177#endif
178
179#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
180static struct platform_device bfin_sport0_uart_device = {
181 .name = "bfin-sport-uart",
182 .id = 0,
183};
184
185static struct platform_device bfin_sport1_uart_device = {
186 .name = "bfin-sport-uart",
187 .id = 1,
188};
189#endif
190
191#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
192static struct resource isp1362_hcd_resources[] = {
193 {
194 .start = 0x20308000,
195 .end = 0x20308000,
196 .flags = IORESOURCE_MEM,
197 },{
198 .start = 0x20308004,
199 .end = 0x20308004,
200 .flags = IORESOURCE_MEM,
201 },{
202 .start = IRQ_PF4,
203 .end = IRQ_PF4,
204 .flags = IORESOURCE_IRQ,
205 },
206};
207
208static struct isp1362_platform_data isp1362_priv = {
209 .sel15Kres = 1,
210 .clknotstop = 0,
211 .oc_enable = 0,
212 .int_act_high = 0,
213 .int_edge_triggered = 0,
214 .remote_wakeup_connected = 0,
215 .no_power_switching = 1,
216 .power_switching_mode = 0,
217};
218
219static struct platform_device isp1362_hcd_device = {
220 .name = "isp1362-hcd",
221 .id = 0,
222 .dev = {
223 .platform_data = &isp1362_priv,
224 },
225 .num_resources = ARRAY_SIZE(isp1362_hcd_resources),
226 .resource = isp1362_hcd_resources,
227};
228#endif
229
230static struct platform_device *cm_bf533_devices[] __initdata = {
231#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
232 &bfin_uart_device,
233#endif
234
235#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
236 &bfin_sport0_uart_device,
237 &bfin_sport1_uart_device,
238#endif
239
240#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
241 &rtc_device,
242#endif
243
244#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
245 &isp1362_hcd_device,
246#endif
247
248#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
249 &smc91x_device,
250#endif
251
252#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
253 &spi_bfin_master_device,
254#endif
255};
256
257static int __init cm_bf533_init(void)
258{
259 printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__);
260 platform_add_devices(cm_bf533_devices, ARRAY_SIZE(cm_bf533_devices));
261#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
262 spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
263#endif
264 return 0;
265}
266
267arch_initcall(cm_bf533_init);
diff --git a/arch/blackfin/mach-bf533/boards/ezkit.c b/arch/blackfin/mach-bf533/boards/ezkit.c
new file mode 100644
index 000000000000..747298ea907b
--- /dev/null
+++ b/arch/blackfin/mach-bf533/boards/ezkit.c
@@ -0,0 +1,224 @@
1/*
2 * File: arch/blackfin/mach-bf533/ezkit.c
3 * Based on: Orginal Work
4 * Author: Aidan Williams <aidan@nicta.com.au>
5 *
6 * Created: 2005
7 * Description:
8 *
9 * Modified: Robin Getz <rgetz@blackfin.uclinux.org> - Named the boards
10 * Copyright 2005 National ICT Australia (NICTA)
11 * Copyright 2004-2006 Analog Devices Inc.
12 *
13 * Bugs: Enter bugs at http://blackfin.uclinux.org/
14 *
15 * This program is free software; you can redistribute it and/or modify
16 * it under the terms of the GNU General Public License as published by
17 * the Free Software Foundation; either version 2 of the License, or
18 * (at your option) any later version.
19 *
20 * This program is distributed in the hope that it will be useful,
21 * but WITHOUT ANY WARRANTY; without even the implied warranty of
22 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
23 * GNU General Public License for more details.
24 *
25 * You should have received a copy of the GNU General Public License
26 * along with this program; if not, see the file COPYING, or write
27 * to the Free Software Foundation, Inc.,
28 * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
29 */
30
31#include <linux/device.h>
32#include <linux/platform_device.h>
33#include <linux/mtd/mtd.h>
34#include <linux/mtd/partitions.h>
35#include <linux/spi/spi.h>
36#include <linux/spi/flash.h>
37#include <linux/usb_isp1362.h>
38#include <asm/irq.h>
39#include <asm/bfin5xx_spi.h>
40
41/*
42 * Name the Board for the /proc/cpuinfo
43 */
44char *bfin_board_name = "ADDS-BF533-EZKIT";
45
46#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
47static struct platform_device rtc_device = {
48 .name = "rtc-bfin",
49 .id = -1,
50};
51#endif
52
53/*
54 * USB-LAN EzExtender board
55 * Driver needs to know address, irq and flag pin.
56 */
57#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
58static struct resource smc91x_resources[] = {
59 {
60 .name = "smc91x-regs",
61 .start = 0x20310300,
62 .end = 0x20310300 + 16,
63 .flags = IORESOURCE_MEM,
64 },{
65 .start = IRQ_PF9,
66 .end = IRQ_PF9,
67 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
68 },
69};
70static struct platform_device smc91x_device = {
71 .name = "smc91x",
72 .id = 0,
73 .num_resources = ARRAY_SIZE(smc91x_resources),
74 .resource = smc91x_resources,
75};
76#endif
77
78#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
79/* all SPI peripherals info goes here */
80
81#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
82static struct mtd_partition bfin_spi_flash_partitions[] = {
83 {
84 .name = "bootloader",
85 .size = 0x00020000,
86 .offset = 0,
87 .mask_flags = MTD_CAP_ROM
88 },{
89 .name = "kernel",
90 .size = 0xe0000,
91 .offset = 0x20000
92 },{
93 .name = "file system",
94 .size = 0x700000,
95 .offset = 0x00100000,
96 }
97};
98
99static struct flash_platform_data bfin_spi_flash_data = {
100 .name = "m25p80",
101 .parts = bfin_spi_flash_partitions,
102 .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
103 .type = "m25p64",
104};
105
106/* SPI flash chip (m25p64) */
107static struct bfin5xx_spi_chip spi_flash_chip_info = {
108 .enable_dma = 0, /* use dma transfer with this chip*/
109 .bits_per_word = 8,
110};
111#endif
112
113#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
114/* SPI ADC chip */
115static struct bfin5xx_spi_chip spi_adc_chip_info = {
116 .enable_dma = 1, /* use dma transfer with this chip*/
117 .bits_per_word = 16,
118};
119#endif
120
121#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
122static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
123 .enable_dma = 0,
124 .bits_per_word = 16,
125};
126#endif
127
128static struct spi_board_info bfin_spi_board_info[] __initdata = {
129#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
130 {
131 /* the modalias must be the same as spi device driver name */
132 .modalias = "m25p80", /* Name of spi_driver for this device */
133 .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
134 .bus_num = 1, /* Framework bus number */
135 .chip_select = 2, /* Framework chip select. On STAMP537 it is SPISSEL2*/
136 .platform_data = &bfin_spi_flash_data,
137 .controller_data = &spi_flash_chip_info,
138 .mode = SPI_MODE_3,
139 },
140#endif
141
142#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
143 {
144 .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
145 .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */
146 .bus_num = 1, /* Framework bus number */
147 .chip_select = 1, /* Framework chip select. */
148 .platform_data = NULL, /* No spi_driver specific config */
149 .controller_data = &spi_adc_chip_info,
150 },
151#endif
152
153#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
154 {
155 .modalias = "ad1836-spi",
156 .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
157 .bus_num = 1,
158 .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
159 .controller_data = &ad1836_spi_chip_info,
160 },
161#endif
162};
163
164/* SPI controller data */
165static struct bfin5xx_spi_master spi_bfin_master_info = {
166 .num_chipselect = 8,
167 .enable_dma = 1, /* master has the ability to do dma transfer */
168};
169
170static struct platform_device spi_bfin_master_device = {
171 .name = "bfin-spi-master",
172 .id = 1, /* Bus number */
173 .dev = {
174 .platform_data = &spi_bfin_master_info, /* Passed to driver */
175 },
176};
177#endif /* spi master and devices */
178
179#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
180static struct resource bfin_uart_resources[] = {
181 {
182 .start = 0xFFC00400,
183 .end = 0xFFC004FF,
184 .flags = IORESOURCE_MEM,
185 },
186};
187
188static struct platform_device bfin_uart_device = {
189 .name = "bfin-uart",
190 .id = 1,
191 .num_resources = ARRAY_SIZE(bfin_uart_resources),
192 .resource = bfin_uart_resources,
193};
194#endif
195
196static struct platform_device *ezkit_devices[] __initdata = {
197#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
198 &smc91x_device,
199#endif
200
201#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
202 &spi_bfin_master_device,
203#endif
204
205#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
206 &rtc_device,
207#endif
208
209#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
210 &bfin_uart_device,
211#endif
212};
213
214static int __init ezkit_init(void)
215{
216 printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__);
217 platform_add_devices(ezkit_devices, ARRAY_SIZE(ezkit_devices));
218#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
219 spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
220#endif
221 return 0;
222}
223
224arch_initcall(ezkit_init);
diff --git a/arch/blackfin/mach-bf533/boards/generic_board.c b/arch/blackfin/mach-bf533/boards/generic_board.c
new file mode 100644
index 000000000000..c0f43ccfbfb5
--- /dev/null
+++ b/arch/blackfin/mach-bf533/boards/generic_board.c
@@ -0,0 +1,95 @@
1/*
2 * File: arch/blackfin/mach-bf533/generic_board.c
3 * Based on: arch/blackfin/mach-bf533/ezkit.c
4 * Author: Aidan Williams <aidan@nicta.com.au>
5 *
6 * Created: 2005
7 * Description:
8 *
9 * Modified:
10 * Copyright 2005 National ICT Australia (NICTA)
11 * Copyright 2004-2006 Analog Devices Inc.
12 *
13 * Bugs: Enter bugs at http://blackfin.uclinux.org/
14 *
15 * This program is free software; you can redistribute it and/or modify
16 * it under the terms of the GNU General Public License as published by
17 * the Free Software Foundation; either version 2 of the License, or
18 * (at your option) any later version.
19 *
20 * This program is distributed in the hope that it will be useful,
21 * but WITHOUT ANY WARRANTY; without even the implied warranty of
22 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
23 * GNU General Public License for more details.
24 *
25 * You should have received a copy of the GNU General Public License
26 * along with this program; if not, see the file COPYING, or write
27 * to the Free Software Foundation, Inc.,
28 * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
29 */
30
31#include <linux/device.h>
32#include <linux/platform_device.h>
33#include <asm/irq.h>
34
35/*
36 * Name the Board for the /proc/cpuinfo
37 */
38char *bfin_board_name = "UNKNOWN BOARD";
39
40#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
41static struct platform_device rtc_device = {
42 .name = "rtc-bfin",
43 .id = -1,
44};
45#endif
46
47/*
48 * Driver needs to know address, irq and flag pin.
49 */
50#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
51static struct resource smc91x_resources[] = {
52 {
53 .start = 0x20300300,
54 .end = 0x20300300 + 16,
55 .flags = IORESOURCE_MEM,
56 },{
57 .start = IRQ_PROG_INTB,
58 .end = IRQ_PROG_INTB,
59 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
60 },{
61 /*
62 * denotes the flag pin and is used directly if
63 * CONFIG_IRQCHIP_DEMUX_GPIO is defined.
64 */
65 .start = IRQ_PF7,
66 .end = IRQ_PF7,
67 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
68 },
69};
70
71static struct platform_device smc91x_device = {
72 .name = "smc91x",
73 .id = 0,
74 .num_resources = ARRAY_SIZE(smc91x_resources),
75 .resource = smc91x_resources,
76};
77#endif
78
79static struct platform_device *generic_board_devices[] __initdata = {
80#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
81 &rtc_device,
82#endif
83
84#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
85 &smc91x_device,
86#endif
87};
88
89static int __init generic_board_init(void)
90{
91 printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__);
92 return platform_add_devices(generic_board_devices, ARRAY_SIZE(generic_board_devices));
93}
94
95arch_initcall(generic_board_init);
diff --git a/arch/blackfin/mach-bf533/boards/stamp.c b/arch/blackfin/mach-bf533/boards/stamp.c
new file mode 100644
index 000000000000..d7b3a5d74e8c
--- /dev/null
+++ b/arch/blackfin/mach-bf533/boards/stamp.c
@@ -0,0 +1,321 @@
1/*
2 * File: arch/blackfin/mach-bf533/stamp.c
3 * Based on: arch/blackfin/mach-bf533/ezkit.c
4 * Author: Aidan Williams <aidan@nicta.com.au>
5 *
6 * Created: 2005
7 * Description: Board Info File for the BF533-STAMP
8 *
9 * Modified:
10 * Copyright 2005 National ICT Australia (NICTA)
11 * Copyright 2004-2006 Analog Devices Inc.
12 *
13 * Bugs: Enter bugs at http://blackfin.uclinux.org/
14 *
15 * This program is free software; you can redistribute it and/or modify
16 * it under the terms of the GNU General Public License as published by
17 * the Free Software Foundation; either version 2 of the License, or
18 * (at your option) any later version.
19 *
20 * This program is distributed in the hope that it will be useful,
21 * but WITHOUT ANY WARRANTY; without even the implied warranty of
22 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
23 * GNU General Public License for more details.
24 *
25 * You should have received a copy of the GNU General Public License
26 * along with this program; if not, see the file COPYING, or write
27 * to the Free Software Foundation, Inc.,
28 * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
29 */
30
31#include <linux/device.h>
32#include <linux/platform_device.h>
33#include <linux/mtd/mtd.h>
34#include <linux/mtd/partitions.h>
35#include <linux/spi/spi.h>
36#include <linux/spi/flash.h>
37#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
38#include <linux/usb_isp1362.h>
39#endif
40#include <asm/irq.h>
41#include <asm/bfin5xx_spi.h>
42
43/*
44 * Name the Board for the /proc/cpuinfo
45 */
46char *bfin_board_name = "ADDS-BF533-STAMP";
47
48#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
49static struct platform_device rtc_device = {
50 .name = "rtc-bfin",
51 .id = -1,
52};
53#endif
54
55/*
56 * Driver needs to know address, irq and flag pin.
57 */
58#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
59static struct resource smc91x_resources[] = {
60 {
61 .name = "smc91x-regs",
62 .start = 0x20300300,
63 .end = 0x20300300 + 16,
64 .flags = IORESOURCE_MEM,
65 },{
66 .start = IRQ_PF7,
67 .end = IRQ_PF7,
68 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
69 },
70};
71
72static struct platform_device smc91x_device = {
73 .name = "smc91x",
74 .id = 0,
75 .num_resources = ARRAY_SIZE(smc91x_resources),
76 .resource = smc91x_resources,
77};
78#endif
79
80#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
81static struct resource net2272_bfin_resources[] = {
82 {
83 .start = 0x20300000,
84 .end = 0x20300000 + 0x100,
85 .flags = IORESOURCE_MEM,
86 },{
87 .start = IRQ_PF10,
88 .end = IRQ_PF10,
89 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
90 },
91};
92
93static struct platform_device net2272_bfin_device = {
94 .name = "net2272",
95 .id = -1,
96 .num_resources = ARRAY_SIZE(net2272_bfin_resources),
97 .resource = net2272_bfin_resources,
98};
99#endif
100
101#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
102/* all SPI peripherals info goes here */
103
104#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
105static struct mtd_partition bfin_spi_flash_partitions[] = {
106 {
107 .name = "bootloader",
108 .size = 0x00020000,
109 .offset = 0,
110 .mask_flags = MTD_CAP_ROM
111 },{
112 .name = "kernel",
113 .size = 0xe0000,
114 .offset = 0x20000
115 },{
116 .name = "file system",
117 .size = 0x700000,
118 .offset = 0x00100000,
119 }
120};
121
122static struct flash_platform_data bfin_spi_flash_data = {
123 .name = "m25p80",
124 .parts = bfin_spi_flash_partitions,
125 .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
126 .type = "m25p64",
127};
128
129/* SPI flash chip (m25p64) */
130static struct bfin5xx_spi_chip spi_flash_chip_info = {
131 .enable_dma = 0, /* use dma transfer with this chip*/
132 .bits_per_word = 8,
133};
134#endif
135
136#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
137/* SPI ADC chip */
138static struct bfin5xx_spi_chip spi_adc_chip_info = {
139 .enable_dma = 1, /* use dma transfer with this chip*/
140 .bits_per_word = 16,
141};
142#endif
143
144#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
145static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
146 .enable_dma = 0,
147 .bits_per_word = 16,
148};
149#endif
150
151#if defined(CONFIG_PBX)
152static struct bfin5xx_spi_chip spi_si3xxx_chip_info = {
153 .ctl_reg = 0x4, /* send zero */
154 .enable_dma = 0,
155 .bits_per_word = 8,
156 .cs_change_per_word = 1,
157};
158#endif
159
160#if defined(CONFIG_AD5304) || defined(CONFIG_AD5304_MODULE)
161static struct bfin5xx_spi_chip ad5304_chip_info = {
162 .enable_dma = 0,
163 .bits_per_word = 16,
164};
165#endif
166
167static struct spi_board_info bfin_spi_board_info[] __initdata = {
168#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
169 {
170 /* the modalias must be the same as spi device driver name */
171 .modalias = "m25p80", /* Name of spi_driver for this device */
172 .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
173 .bus_num = 1, /* Framework bus number */
174 .chip_select = 2, /* Framework chip select. On STAMP537 it is SPISSEL2*/
175 .platform_data = &bfin_spi_flash_data,
176 .controller_data = &spi_flash_chip_info,
177 .mode = SPI_MODE_3,
178 },
179#endif
180
181#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
182 {
183 .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
184 .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */
185 .bus_num = 1, /* Framework bus number */
186 .chip_select = 1, /* Framework chip select. */
187 .platform_data = NULL, /* No spi_driver specific config */
188 .controller_data = &spi_adc_chip_info,
189 },
190#endif
191
192#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
193 {
194 .modalias = "ad1836-spi",
195 .max_speed_hz = 31250000, /* max spi clock (SCK) speed in HZ */
196 .bus_num = 1,
197 .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
198 .controller_data = &ad1836_spi_chip_info,
199 },
200#endif
201
202#if defined(CONFIG_PBX)
203 {
204 .modalias = "fxs-spi",
205 .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */
206 .bus_num = 1,
207 .chip_select = 3,
208 .controller_data= &spi_si3xxx_chip_info,
209 .mode = SPI_MODE_3,
210 },
211 {
212 .modalias = "fxo-spi",
213 .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */
214 .bus_num = 1,
215 .chip_select = 2,
216 .controller_data= &spi_si3xxx_chip_info,
217 .mode = SPI_MODE_3,
218 },
219#endif
220
221#if defined(CONFIG_AD5304) || defined(CONFIG_AD5304_MODULE)
222 {
223 .modalias = "ad5304_spi",
224 .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */
225 .bus_num = 1,
226 .chip_select = 2,
227 .platform_data = NULL,
228 .controller_data = &ad5304_chip_info,
229 .mode = SPI_MODE_2,
230 },
231#endif
232};
233
234/* SPI controller data */
235static struct bfin5xx_spi_master spi_bfin_master_info = {
236 .num_chipselect = 8,
237 .enable_dma = 1, /* master has the ability to do dma transfer */
238};
239
240static struct platform_device spi_bfin_master_device = {
241 .name = "bfin-spi-master",
242 .id = 1, /* Bus number */
243 .dev = {
244 .platform_data = &spi_bfin_master_info, /* Passed to driver */
245 },
246};
247#endif /* spi master and devices */
248
249#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
250static struct platform_device bfin_fb_device = {
251 .name = "bf537-fb",
252};
253#endif
254
255#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
256static struct resource bfin_uart_resources[] = {
257 {
258 .start = 0xFFC00400,
259 .end = 0xFFC004FF,
260 .flags = IORESOURCE_MEM,
261 },
262};
263
264static struct platform_device bfin_uart_device = {
265 .name = "bfin-uart",
266 .id = 1,
267 .num_resources = ARRAY_SIZE(bfin_uart_resources),
268 .resource = bfin_uart_resources,
269};
270#endif
271
272#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
273static struct platform_device bfin_sport0_uart_device = {
274 .name = "bfin-sport-uart",
275 .id = 0,
276};
277
278static struct platform_device bfin_sport1_uart_device = {
279 .name = "bfin-sport-uart",
280 .id = 1,
281};
282#endif
283
284static struct platform_device *stamp_devices[] __initdata = {
285#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
286 &rtc_device,
287#endif
288
289#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
290 &smc91x_device,
291#endif
292
293#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
294 &net2272_bfin_device,
295#endif
296
297#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
298 &spi_bfin_master_device,
299#endif
300
301#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
302 &bfin_uart_device,
303#endif
304
305#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
306 &bfin_sport0_uart_device,
307 &bfin_sport1_uart_device,
308#endif
309};
310
311static int __init stamp_init(void)
312{
313 printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__);
314 platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
315#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
316 spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
317#endif
318 return 0;
319}
320
321arch_initcall(stamp_init);
diff --git a/arch/blackfin/mach-bf533/cpu.c b/arch/blackfin/mach-bf533/cpu.c
new file mode 100644
index 000000000000..99547c4c290e
--- /dev/null
+++ b/arch/blackfin/mach-bf533/cpu.c
@@ -0,0 +1,161 @@
1/*
2 * File: arch/blackfin/mach-bf533/cpu.c
3 * Based on:
4 * Author: michael.kang@analog.com
5 *
6 * Created:
7 * Description: clock scaling for the bf533
8 *
9 * Modified:
10 * Copyright 2004-2006 Analog Devices Inc.
11 *
12 * Bugs: Enter bugs at http://blackfin.uclinux.org/
13 *
14 * This program is free software; you can redistribute it and/or modify
15 * it under the terms of the GNU General Public License as published by
16 * the Free Software Foundation; either version 2 of the License, or
17 * (at your option) any later version.
18 *
19 * This program is distributed in the hope that it will be useful,
20 * but WITHOUT ANY WARRANTY; without even the implied warranty of
21 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
22 * GNU General Public License for more details.
23 *
24 * You should have received a copy of the GNU General Public License
25 * along with this program; if not, see the file COPYING, or write
26 * to the Free Software Foundation, Inc.,
27 * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
28 */
29
30#include <linux/kernel.h>
31#include <linux/types.h>
32#include <linux/init.h>
33#include <linux/cpufreq.h>
34#include <asm/dpmc.h>
35#include <linux/fs.h>
36#include <asm/bfin-global.h>
37
38/* CONFIG_CLKIN_HZ=11059200 */
39#define VCO5 (CONFIG_CLKIN_HZ*45) /*497664000 */
40#define VCO4 (CONFIG_CLKIN_HZ*36) /*398131200 */
41#define VCO3 (CONFIG_CLKIN_HZ*27) /*298598400 */
42#define VCO2 (CONFIG_CLKIN_HZ*18) /*199065600 */
43#define VCO1 (CONFIG_CLKIN_HZ*9) /*99532800 */
44#define VCO(x) VCO##x
45
46#define FREQ(x) {VCO(x),VCO(x)/4},{VCO(x),VCO(x)/2},{VCO(x),VCO(x)}
47/* frequency */
48static struct cpufreq_frequency_table bf533_freq_table[] = {
49 FREQ(1),
50 FREQ(3),
51 {VCO4, VCO4 / 2}, {VCO4, VCO4},
52 FREQ(5),
53 {0, CPUFREQ_TABLE_END},
54};
55
56/*
57 * dpmc_fops->ioctl()
58 * static int dpmc_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
59 */
60static int bf533_getfreq(unsigned int cpu)
61{
62 unsigned long cclk_mhz, vco_mhz;
63
64 /* The driver only support single cpu */
65 if (cpu == 0)
66 dpmc_fops.ioctl(NULL, NULL, IOCTL_GET_CORECLOCK, &cclk_mhz);
67 else
68 cclk_mhz = -1;
69 return cclk_mhz;
70}
71
72static int bf533_target(struct cpufreq_policy *policy,
73 unsigned int target_freq, unsigned int relation)
74{
75 unsigned long cclk_mhz;
76 unsigned long vco_mhz;
77 unsigned long flags;
78 unsigned int index, vco_index;
79 int i;
80
81 struct cpufreq_freqs freqs;
82 if (cpufreq_frequency_table_target
83 (policy, bf533_freq_table, target_freq, relation, &index))
84 return -EINVAL;
85 cclk_mhz = bf533_freq_table[index].frequency;
86 vco_mhz = bf533_freq_table[index].index;
87
88 dpmc_fops.ioctl(NULL, NULL, IOCTL_CHANGE_FREQUENCY, &vco_mhz);
89 freqs.old = bf533_getfreq(0);
90 freqs.new = cclk_mhz;
91 freqs.cpu = 0;
92
93 pr_debug("cclk begin change to cclk %d,vco=%d,index=%d,target=%d,oldfreq=%d\n",
94 cclk_mhz, vco_mhz, index, target_freq, freqs.old);
95
96 cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
97 local_irq_save(flags);
98 dpmc_fops.ioctl(NULL, NULL, IOCTL_SET_CCLK, &cclk_mhz);
99 local_irq_restore(flags);
100 cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
101
102 vco_mhz = get_vco();
103 cclk_mhz = get_cclk();
104 return 0;
105}
106
107/* make sure that only the "userspace" governor is run -- anything else wouldn't make sense on
108 * this platform, anyway.
109 */
110static int bf533_verify_speed(struct cpufreq_policy *policy)
111{
112 return cpufreq_frequency_table_verify(policy, &bf533_freq_table);
113}
114
115static int __init __bf533_cpu_init(struct cpufreq_policy *policy)
116{
117 int result;
118
119 if (policy->cpu != 0)
120 return -EINVAL;
121
122 policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
123
124 policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
125 /*Now ,only support one cpu */
126 policy->cur = bf533_getfreq(0);
127 cpufreq_frequency_table_get_attr(bf533_freq_table, policy->cpu);
128 return cpufreq_frequency_table_cpuinfo(policy, bf533_freq_table);
129}
130
131static struct freq_attr *bf533_freq_attr[] = {
132 &cpufreq_freq_attr_scaling_available_freqs,
133 NULL,
134};
135
136static struct cpufreq_driver bf533_driver = {
137 .verify = bf533_verify_speed,
138 .target = bf533_target,
139 .get = bf533_getfreq,
140 .init = __bf533_cpu_init,
141 .name = "bf533",
142 .owner = THIS_MODULE,
143 .attr = bf533_freq_attr,
144};
145
146static int __init bf533_cpu_init(void)
147{
148 return cpufreq_register_driver(&bf533_driver);
149}
150
151static void __exit bf533_cpu_exit(void)
152{
153 cpufreq_unregister_driver(&bf533_driver);
154}
155
156MODULE_AUTHOR("Mickael Kang");
157MODULE_DESCRIPTION("cpufreq driver for BF533 CPU");
158MODULE_LICENSE("GPL");
159
160module_init(bf533_cpu_init);
161module_exit(bf533_cpu_exit);
diff --git a/arch/blackfin/mach-bf533/head.S b/arch/blackfin/mach-bf533/head.S
new file mode 100644
index 000000000000..4808edb0680f
--- /dev/null
+++ b/arch/blackfin/mach-bf533/head.S
@@ -0,0 +1,774 @@
1/*
2 * File: arch/blackfin/mach-bf533/head.S
3 * Based on:
4 * Author: Jeff Dionne <jeff@uclinux.org> COPYRIGHT 1998 D. Jeff Dionne
5 *
6 * Created: 1998
7 * Description: bf533 startup file
8 *
9 * Modified:
10 * Copyright 2004-2006 Analog Devices Inc.
11 *
12 * Bugs: Enter bugs at http://blackfin.uclinux.org/
13 *
14 * This program is free software; you can redistribute it and/or modify
15 * it under the terms of the GNU General Public License as published by
16 * the Free Software Foundation; either version 2 of the License, or
17 * (at your option) any later version.
18 *
19 * This program is distributed in the hope that it will be useful,
20 * but WITHOUT ANY WARRANTY; without even the implied warranty of
21 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
22 * GNU General Public License for more details.
23 *
24 * You should have received a copy of the GNU General Public License
25 * along with this program; if not, see the file COPYING, or write
26 * to the Free Software Foundation, Inc.,
27 * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
28 */
29
30#include <linux/linkage.h>
31#include <asm/blackfin.h>
32#if CONFIG_BFIN_KERNEL_CLOCK
33#include <asm/mach/mem_init.h>
34#endif
35#if CONFIG_DEBUG_KERNEL_START
36#include <asm/mach-common/def_LPBlackfin.h>
37#endif
38
39.global __rambase
40.global __ramstart
41.global __ramend
42.extern ___bss_stop
43.extern ___bss_start
44.extern _bf53x_relocate_l1_mem
45
46#define INITIAL_STACK 0xFFB01000
47
48.text
49
50ENTRY(__start)
51ENTRY(__stext)
52 /* R0: argument of command line string, passed from uboot, save it */
53 R7 = R0;
54 /* Set the SYSCFG register */
55 R0 = 0x36;
56 /*Enable Cycle Counter and Nesting Of Interrupts(3rd Bit)*/
57 SYSCFG = R0;
58 R0 = 0;
59
60 /*Clear Out All the data and pointer Registers*/
61 R1 = R0;
62 R2 = R0;
63 R3 = R0;
64 R4 = R0;
65 R5 = R0;
66 R6 = R0;
67
68 P0 = R0;
69 P1 = R0;
70 P2 = R0;
71 P3 = R0;
72 P4 = R0;
73 P5 = R0;
74
75 LC0 = r0;
76 LC1 = r0;
77 L0 = r0;
78 L1 = r0;
79 L2 = r0;
80 L3 = r0;
81
82 /* Clear Out All the DAG Registers*/
83 B0 = r0;
84 B1 = r0;
85 B2 = r0;
86 B3 = r0;
87
88 I0 = r0;
89 I1 = r0;
90 I2 = r0;
91 I3 = r0;
92
93 M0 = r0;
94 M1 = r0;
95 M2 = r0;
96 M3 = r0;
97
98#if CONFIG_DEBUG_KERNEL_START
99
100/*
101 * Set up a temporary Event Vector Table, so if something bad happens before
102 * the kernel is fully started, it doesn't vector off into the bootloaders
103 * table
104 */
105 P0.l = lo(EVT2);
106 P0.h = hi(EVT2);
107 P1.l = lo(EVT15);
108 P1.h = hi(EVT15);
109 P2.l = debug_kernel_start_trap;
110 P2.h = debug_kernel_start_trap;
111
112 RTS = P2;
113 RTI = P2;
114 RTX = P2;
115 RTN = P2;
116 RTE = P2;
117
118.Lfill_temp_vector_table:
119 [P0++] = P2; /* Core Event Vector Table */
120 CC = P0 == P1;
121 if !CC JUMP .Lfill_temp_vector_table
122 P0 = r0;
123 P1 = r0;
124 P2 = r0;
125
126#endif
127
128 p0.h = hi(FIO_MASKA_C);
129 p0.l = lo(FIO_MASKA_C);
130 r0 = 0xFFFF(Z);
131 w[p0] = r0.L; /* Disable all interrupts */
132 ssync;
133
134 p0.h = hi(FIO_MASKB_C);
135 p0.l = lo(FIO_MASKB_C);
136 r0 = 0xFFFF(Z);
137 w[p0] = r0.L; /* Disable all interrupts */
138 ssync;
139
140 /* Turn off the icache */
141 p0.l = (IMEM_CONTROL & 0xFFFF);
142 p0.h = (IMEM_CONTROL >> 16);
143 R1 = [p0];
144 R0 = ~ENICPLB;
145 R0 = R0 & R1;
146
147 /* Anomaly 05000125 */
148#ifdef ANOMALY_05000125
149 CLI R2;
150 SSYNC;
151#endif
152 [p0] = R0;
153 SSYNC;
154#ifdef ANOMALY_05000125
155 STI R2;
156#endif
157
158 /* Turn off the dcache */
159 p0.l = (DMEM_CONTROL & 0xFFFF);
160 p0.h = (DMEM_CONTROL >> 16);
161 R1 = [p0];
162 R0 = ~ENDCPLB;
163 R0 = R0 & R1;
164
165 /* Anomaly 05000125 */
166#ifdef ANOMALY_05000125
167 CLI R2;
168 SSYNC;
169#endif
170 [p0] = R0;
171 SSYNC;
172#ifdef ANOMALY_05000125
173 STI R2;
174#endif
175
176 /* Initialise UART */
177 p0.h = hi(UART_LCR);
178 p0.l = lo(UART_LCR);
179 r0 = 0x0(Z);
180 w[p0] = r0.L; /* To enable DLL writes */
181 ssync;
182
183 p0.h = hi(UART_DLL);
184 p0.l = lo(UART_DLL);
185 r0 = 0x0(Z);
186 w[p0] = r0.L;
187 ssync;
188
189 p0.h = hi(UART_DLH);
190 p0.l = lo(UART_DLH);
191 r0 = 0x00(Z);
192 w[p0] = r0.L;
193 ssync;
194
195 p0.h = hi(UART_GCTL);
196 p0.l = lo(UART_GCTL);
197 r0 = 0x0(Z);
198 w[p0] = r0.L; /* To enable UART clock */
199 ssync;
200
201 /* Initialize stack pointer */
202 sp.l = lo(INITIAL_STACK);
203 sp.h = hi(INITIAL_STACK);
204 fp = sp;
205 usp = sp;
206
207 /* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */
208 call _bf53x_relocate_l1_mem;
209#if CONFIG_BFIN_KERNEL_CLOCK
210 call _start_dma_code;
211#endif
212
213 /* Code for initializing Async memory banks */
214
215 p2.h = hi(EBIU_AMBCTL1);
216 p2.l = lo(EBIU_AMBCTL1);
217 r0.h = hi(AMBCTL1VAL);
218 r0.l = lo(AMBCTL1VAL);
219 [p2] = r0;
220 ssync;
221
222 p2.h = hi(EBIU_AMBCTL0);
223 p2.l = lo(EBIU_AMBCTL0);
224 r0.h = hi(AMBCTL0VAL);
225 r0.l = lo(AMBCTL0VAL);
226 [p2] = r0;
227 ssync;
228
229 p2.h = hi(EBIU_AMGCTL);
230 p2.l = lo(EBIU_AMGCTL);
231 r0 = AMGCTLVAL;
232 w[p2] = r0;
233 ssync;
234
235 /* This section keeps the processor in supervisor mode
236 * during kernel boot. Switches to user mode at end of boot.
237 * See page 3-9 of Hardware Reference manual for documentation.
238 */
239
240 /* EVT15 = _real_start */
241
242 p0.l = lo(EVT15);
243 p0.h = hi(EVT15);
244 p1.l = _real_start;
245 p1.h = _real_start;
246 [p0] = p1;
247 csync;
248
249 p0.l = lo(IMASK);
250 p0.h = hi(IMASK);
251 p1.l = IMASK_IVG15;
252 p1.h = 0x0;
253 [p0] = p1;
254 csync;
255
256 raise 15;
257 p0.l = .LWAIT_HERE;
258 p0.h = .LWAIT_HERE;
259 reti = p0;
260#if defined(ANOMALY_05000281)
261 nop; nop; nop;
262#endif
263 rti;
264
265.LWAIT_HERE:
266 jump .LWAIT_HERE;
267
268ENTRY(_real_start)
269 [ -- sp ] = reti;
270 p0.l = lo(WDOG_CTL);
271 p0.h = hi(WDOG_CTL);
272 r0 = 0xAD6(z);
273 w[p0] = r0; /* watchdog off for now */
274 ssync;
275
276 /* Code update for BSS size == 0
277 * Zero out the bss region.
278 */
279
280 p1.l = ___bss_start;
281 p1.h = ___bss_start;
282 p2.l = ___bss_stop;
283 p2.h = ___bss_stop;
284 r0 = 0;
285 p2 -= p1;
286 lsetup (.L_clear_bss, .L_clear_bss) lc0 = p2;
287.L_clear_bss:
288 B[p1++] = r0;
289
290 /* In case there is a NULL pointer reference
291 * Zero out region before stext
292 */
293
294 p1.l = 0x0;
295 p1.h = 0x0;
296 r0.l = __stext;
297 r0.h = __stext;
298 r0 = r0 >> 1;
299 p2 = r0;
300 r0 = 0;
301 lsetup (.L_clear_zero, .L_clear_zero) lc0 = p2;
302.L_clear_zero:
303 W[p1++] = r0;
304
305/* pass the uboot arguments to the global value command line */
306 R0 = R7;
307 call _cmdline_init;
308
309 p1.l = __rambase;
310 p1.h = __rambase;
311 r0.l = __sdata;
312 r0.h = __sdata;
313 [p1] = r0;
314
315 p1.l = __ramstart;
316 p1.h = __ramstart;
317 p3.l = ___bss_stop;
318 p3.h = ___bss_stop;
319
320 r1 = p3;
321 [p1] = r1;
322
323 /*
324 * load the current thread pointer and stack
325 */
326 r1.l = _init_thread_union;
327 r1.h = _init_thread_union;
328
329 r2.l = 0x2000;
330 r2.h = 0x0000;
331 r1 = r1 + r2;
332 sp = r1;
333 usp = sp;
334 fp = sp;
335 call _start_kernel;
336.L_exit:
337 jump.s .L_exit;
338
339.section .l1.text
340#if CONFIG_BFIN_KERNEL_CLOCK
341ENTRY(_start_dma_code)
342 p0.h = hi(SIC_IWR);
343 p0.l = lo(SIC_IWR);
344 r0.l = 0x1;
345 r0.h = 0x0;
346 [p0] = r0;
347 SSYNC;
348
349 /*
350 * Set PLL_CTL
351 * - [14:09] = MSEL[5:0] : CLKIN / VCO multiplication factors
352 * - [8] = BYPASS : BYPASS the PLL, run CLKIN into CCLK/SCLK
353 * - [7] = output delay (add 200ps of delay to mem signals)
354 * - [6] = input delay (add 200ps of input delay to mem signals)
355 * - [5] = PDWN : 1=All Clocks off
356 * - [3] = STOPCK : 1=Core Clock off
357 * - [1] = PLL_OFF : 1=Disable Power to PLL
358 * - [0] = DF : 1=Pass CLKIN/2 to PLL / 0=Pass CLKIN to PLL
359 * all other bits set to zero
360 */
361
362 p0.h = hi(PLL_LOCKCNT);
363 p0.l = lo(PLL_LOCKCNT);
364 r0 = 0x300(Z);
365 w[p0] = r0.l;
366 ssync;
367
368 P2.H = hi(EBIU_SDGCTL);
369 P2.L = lo(EBIU_SDGCTL);
370 R0 = [P2];
371 BITSET (R0, 24);
372 [P2] = R0;
373 SSYNC;
374
375 r0 = CONFIG_VCO_MULT & 63; /* Load the VCO multiplier */
376 r0 = r0 << 9; /* Shift it over, */
377 r1 = CLKIN_HALF; /* Do we need to divide CLKIN by 2?*/
378 r0 = r1 | r0;
379 r1 = PLL_BYPASS; /* Bypass the PLL? */
380 r1 = r1 << 8; /* Shift it over */
381 r0 = r1 | r0; /* add them all together */
382
383 p0.h = hi(PLL_CTL);
384 p0.l = lo(PLL_CTL); /* Load the address */
385 cli r2; /* Disable interrupts */
386 ssync;
387 w[p0] = r0.l; /* Set the value */
388 idle; /* Wait for the PLL to stablize */
389 sti r2; /* Enable interrupts */
390
391.Lcheck_again:
392 p0.h = hi(PLL_STAT);
393 p0.l = lo(PLL_STAT);
394 R0 = W[P0](Z);
395 CC = BITTST(R0,5);
396 if ! CC jump .Lcheck_again;
397
398 /* Configure SCLK & CCLK Dividers */
399 r0 = (CONFIG_CCLK_ACT_DIV | CONFIG_SCLK_DIV);
400 p0.h = hi(PLL_DIV);
401 p0.l = lo(PLL_DIV);
402 w[p0] = r0.l;
403 ssync;
404
405 p0.l = lo(EBIU_SDRRC);
406 p0.h = hi(EBIU_SDRRC);
407 r0 = mem_SDRRC;
408 w[p0] = r0.l;
409 ssync;
410
411 p0.l = (EBIU_SDBCTL & 0xFFFF);
412 p0.h = (EBIU_SDBCTL >> 16); /* SDRAM Memory Bank Control Register */
413 r0 = mem_SDBCTL;
414 w[p0] = r0.l;
415 ssync;
416
417 P2.H = hi(EBIU_SDGCTL);
418 P2.L = lo(EBIU_SDGCTL);
419 R0 = [P2];
420 BITCLR (R0, 24);
421 p0.h = hi(EBIU_SDSTAT);
422 p0.l = lo(EBIU_SDSTAT);
423 r2.l = w[p0];
424 cc = bittst(r2,3);
425 if !cc jump .Lskip;
426 NOP;
427 BITSET (R0, 23);
428.Lskip:
429 [P2] = R0;
430 SSYNC;
431
432 R0.L = lo(mem_SDGCTL);
433 R0.H = hi(mem_SDGCTL);
434 R1 = [p2];
435 R1 = R1 | R0;
436 [P2] = R1;
437 SSYNC;
438
439 p0.h = hi(SIC_IWR);
440 p0.l = lo(SIC_IWR);
441 r0.l = lo(IWR_ENABLE_ALL)
442 r0.h = hi(IWR_ENABLE_ALL)
443 [p0] = r0;
444 SSYNC;
445
446 RTS;
447#endif /* CONFIG_BFIN_KERNEL_CLOCK */
448
449ENTRY(_bfin_reset)
450 /* No more interrupts to be handled*/
451 CLI R6;
452 SSYNC;
453
454#if defined(CONFIG_BFIN_SHARED_FLASH_ENET)
455 p0.h = hi(FIO_INEN);
456 p0.l = lo(FIO_INEN);
457 r0.l = ~(1 << CONFIG_ENET_FLASH_PIN);
458 w[p0] = r0.l;
459
460 p0.h = hi(FIO_DIR);
461 p0.l = lo(FIO_DIR);
462 r0.l = (1 << CONFIG_ENET_FLASH_PIN);
463 w[p0] = r0.l;
464
465 p0.h = hi(FIO_FLAG_C);
466 p0.l = lo(FIO_FLAG_C);
467 r0.l = (1 << CONFIG_ENET_FLASH_PIN);
468 w[p0] = r0.l;
469#endif
470
471 /* Clear the bits 13-15 in SWRST if they werent cleared */
472 p0.h = hi(SWRST);
473 p0.l = lo(SWRST);
474 csync;
475 r0.l = w[p0];
476
477 /* Clear the IMASK register */
478 p0.h = hi(IMASK);
479 p0.l = lo(IMASK);
480 r0 = 0x0;
481 [p0] = r0;
482
483 /* Clear the ILAT register */
484 p0.h = hi(ILAT);
485 p0.l = lo(ILAT);
486 r0 = [p0];
487 [p0] = r0;
488 SSYNC;
489
490 /* Disable the WDOG TIMER */
491 p0.h = hi(WDOG_CTL);
492 p0.l = lo(WDOG_CTL);
493 r0.l = 0xAD6;
494 w[p0] = r0.l;
495 SSYNC;
496
497 /* Clear the sticky bit incase it is already set */
498 p0.h = hi(WDOG_CTL);
499 p0.l = lo(WDOG_CTL);
500 r0.l = 0x8AD6;
501 w[p0] = r0.l;
502 SSYNC;
503
504 /* Program the count value */
505 R0.l = 0x100;
506 R0.h = 0x0;
507 P0.h = hi(WDOG_CNT);
508 P0.l = lo(WDOG_CNT);
509 [P0] = R0;
510 SSYNC;
511
512 /* Program WDOG_STAT if necessary */
513 P0.h = hi(WDOG_CTL);
514 P0.l = lo(WDOG_CTL);
515 R0 = W[P0](Z);
516 CC = BITTST(R0,1);
517 if !CC JUMP .LWRITESTAT;
518 CC = BITTST(R0,2);
519 if !CC JUMP .LWRITESTAT;
520 JUMP .LSKIP_WRITE;
521
522.LWRITESTAT:
523 /* When watch dog timer is enabled, a write to STAT will load the contents of CNT to STAT */
524 R0 = 0x0000(z);
525 P0.h = hi(WDOG_STAT);
526 P0.l = lo(WDOG_STAT)
527 [P0] = R0;
528 SSYNC;
529
530.LSKIP_WRITE:
531 /* Enable the reset event */
532 P0.h = hi(WDOG_CTL);
533 P0.l = lo(WDOG_CTL);
534 R0 = W[P0](Z);
535 BITCLR(R0,1);
536 BITCLR(R0,2);
537 W[P0] = R0.L;
538 SSYNC;
539 NOP;
540
541 /* Enable the wdog counter */
542 R0 = W[P0](Z);
543 BITCLR(R0,4);
544 W[P0] = R0.L;
545 SSYNC;
546
547 IDLE;
548
549 RTS;
550
551#if CONFIG_DEBUG_KERNEL_START
552debug_kernel_start_trap:
553 /* Set up a temp stack in L1 - SDRAM might not be working */
554 P0.L = lo(L1_DATA_A_START + 0x100);
555 P0.H = hi(L1_DATA_A_START + 0x100);
556 SP = P0;
557
558 /* Make sure the Clocks are the way I think they should be */
559 r0 = CONFIG_VCO_MULT & 63; /* Load the VCO multiplier */
560 r0 = r0 << 9; /* Shift it over, */
561 r1 = CLKIN_HALF; /* Do we need to divide CLKIN by 2?*/
562 r0 = r1 | r0;
563 r1 = PLL_BYPASS; /* Bypass the PLL? */
564 r1 = r1 << 8; /* Shift it over */
565 r0 = r1 | r0; /* add them all together */
566
567 p0.h = hi(PLL_CTL);
568 p0.l = lo(PLL_CTL); /* Load the address */
569 cli r2; /* Disable interrupts */
570 ssync;
571 w[p0] = r0.l; /* Set the value */
572 idle; /* Wait for the PLL to stablize */
573 sti r2; /* Enable interrupts */
574
575.Lcheck_again1:
576 p0.h = hi(PLL_STAT);
577 p0.l = lo(PLL_STAT);
578 R0 = W[P0](Z);
579 CC = BITTST(R0,5);
580 if ! CC jump .Lcheck_again1;
581
582 /* Configure SCLK & CCLK Dividers */
583 r0 = (CONFIG_CCLK_ACT_DIV | CONFIG_SCLK_DIV);
584 p0.h = hi(PLL_DIV);
585 p0.l = lo(PLL_DIV);
586 w[p0] = r0.l;
587 ssync;
588
589 /* Make sure UART is enabled - you can never be sure */
590
591/*
592 * Setup for console. Argument comes from the menuconfig
593 */
594
595#ifdef CONFIG_BAUD_9600
596#define CONSOLE_BAUD_RATE 9600
597#elif CONFIG_BAUD_19200
598#define CONSOLE_BAUD_RATE 19200
599#elif CONFIG_BAUD_38400
600#define CONSOLE_BAUD_RATE 38400
601#elif CONFIG_BAUD_57600
602#define CONSOLE_BAUD_RATE 57600
603#elif CONFIG_BAUD_115200
604#define CONSOLE_BAUD_RATE 115200
605#endif
606
607 p0.h = hi(UART_GCTL);
608 p0.l = lo(UART_GCTL);
609 r0 = 0x00(Z);
610 w[p0] = r0.L; /* To Turn off UART clocks */
611 ssync;
612
613 p0.h = hi(UART_LCR);
614 p0.l = lo(UART_LCR);
615 r0 = 0x83(Z);
616 w[p0] = r0.L; /* To enable DLL writes */
617 ssync;
618
619 R1 = (((CONFIG_CLKIN_HZ * CONFIG_VCO_MULT) / CONFIG_SCLK_DIV) / (CONSOLE_BAUD_RATE * 16));
620
621 p0.h = hi(UART_DLL);
622 p0.l = lo(UART_DLL);
623 r0 = 0xFF(Z);
624 r0 = R1 & R0;
625 w[p0] = r0.L;
626 ssync;
627
628 p0.h = hi(UART_DLH);
629 p0.l = lo(UART_DLH);
630 r1 >>= 8 ;
631 w[p0] = r1.L;
632 ssync;
633
634 p0.h = hi(UART_GCTL);
635 p0.l = lo(UART_GCTL);
636 r0 = 0x0(Z);
637 w[p0] = r0.L; /* To enable UART clock */
638 ssync;
639
640 p0.h = hi(UART_LCR);
641 p0.l = lo(UART_LCR);
642 r0 = 0x03(Z);
643 w[p0] = r0.L; /* To Turn on UART */
644 ssync;
645
646 p0.h = hi(UART_GCTL);
647 p0.l = lo(UART_GCTL);
648 r0 = 0x01(Z);
649 w[p0] = r0.L; /* To Turn on UART Clocks */
650 ssync;
651
652 P0.h = hi(UART_THR);
653 P0.l = lo(UART_THR);
654 P1.h = hi(UART_LSR);
655 P1.l = lo(UART_LSR);
656
657 R0.L = 'K';
658 call .Lwait_char;
659 R0.L='e';
660 call .Lwait_char;
661 R0.L='r';
662 call .Lwait_char;
663 R0.L='n'
664 call .Lwait_char;
665 R0.L='e'
666 call .Lwait_char;
667 R0.L='l';
668 call .Lwait_char;
669 R0.L=' ';
670 call .Lwait_char;
671 R0.L='c';
672 call .Lwait_char;
673 R0.L='r';
674 call .Lwait_char;
675 R0.L='a';
676 call .Lwait_char;
677 R0.L='s';
678 call .Lwait_char;
679 R0.L='h';
680 call .Lwait_char;
681 R0.L='\r';
682 call .Lwait_char;
683 R0.L='\n';
684 call .Lwait_char;
685
686 R0.L='S';
687 call .Lwait_char;
688 R0.L='E';
689 call .Lwait_char;
690 R0.L='Q'
691 call .Lwait_char;
692 R0.L='S'
693 call .Lwait_char;
694 R0.L='T';
695 call .Lwait_char;
696 R0.L='A';
697 call .Lwait_char;
698 R0.L='T';
699 call .Lwait_char;
700 R0.L='=';
701 call .Lwait_char;
702 R2 = SEQSTAT;
703 call .Ldump_reg;
704
705 R0.L=' ';
706 call .Lwait_char;
707 R0.L='R';
708 call .Lwait_char;
709 R0.L='E'
710 call .Lwait_char;
711 R0.L='T'
712 call .Lwait_char;
713 R0.L='X';
714 call .Lwait_char;
715 R0.L='=';
716 call .Lwait_char;
717 R2 = RETX;
718 call .Ldump_reg;
719
720 R0.L='\r';
721 call .Lwait_char;
722 R0.L='\n';
723 call .Lwait_char;
724
725.Ldebug_kernel_start_trap_done:
726 JUMP .Ldebug_kernel_start_trap_done;
727.Ldump_reg:
728 R3 = 32;
729 R4 = 0x0F;
730 R5 = ':'; /* one past 9 */
731
732.Ldump_reg2:
733 R0 = R2;
734 R3 += -4;
735 R0 >>>= R3;
736 R0 = R0 & R4;
737 R0 += 0x30;
738 CC = R0 <= R5;
739 if CC JUMP .Ldump_reg1;
740 R0 += 7;
741
742.Ldump_reg1:
743 R1.l = W[P1];
744 CC = BITTST(R1, 5);
745 if !CC JUMP .Ldump_reg1;
746 W[P0] = r0;
747
748 CC = R3 == 0;
749 if !CC JUMP .Ldump_reg2
750 RTS;
751
752.Lwait_char:
753 R1.l = W[P1];
754 CC = BITTST(R1, 5);
755 if !CC JUMP .Lwait_char;
756 W[P0] = r0;
757 RTS;
758
759#endif /* CONFIG_DEBUG_KERNEL_START */
760
761.data
762
763/*
764 * Set up the usable of RAM stuff. Size of RAM is determined then
765 * an initial stack set up at the end.
766 */
767
768.align 4
769__rambase:
770.long 0
771__ramstart:
772.long 0
773__ramend:
774.long 0
diff --git a/arch/blackfin/mach-bf533/ints-priority.c b/arch/blackfin/mach-bf533/ints-priority.c
new file mode 100644
index 000000000000..36a693345204
--- /dev/null
+++ b/arch/blackfin/mach-bf533/ints-priority.c
@@ -0,0 +1,65 @@
1/*
2 * File: arch/blackfin/mach-bf533/ints-priority.c
3 * Based on:
4 * Author: Michael Hennerich
5 *
6 * Created: ?
7 * Description: Set up the interupt priorities
8 *
9 * Modified:
10 * Copyright 2004-2006 Analog Devices Inc.
11 *
12 * Bugs: Enter bugs at http://blackfin.uclinux.org/
13 *
14 * This program is free software; you can redistribute it and/or modify
15 * it under the terms of the GNU General Public License as published by
16 * the Free Software Foundation; either version 2 of the License, or
17 * (at your option) any later version.
18 *
19 * This program is distributed in the hope that it will be useful,
20 * but WITHOUT ANY WARRANTY; without even the implied warranty of
21 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
22 * GNU General Public License for more details.
23 *
24 * You should have received a copy of the GNU General Public License
25 * along with this program; if not, see the file COPYING, or write
26 * to the Free Software Foundation, Inc.,
27 * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
28 */
29
30#include <linux/module.h>
31#include <asm/blackfin.h>
32#include <asm/irq.h>
33
34void program_IAR(void)
35{
36 /* Program the IAR0 Register with the configured priority */
37 bfin_write_SIC_IAR0(((CONFIG_PLLWAKE_ERROR - 7) << PLLWAKE_ERROR_POS) |
38 ((CONFIG_DMA_ERROR - 7) << DMA_ERROR_POS) |
39 ((CONFIG_PPI_ERROR - 7) << PPI_ERROR_POS) |
40 ((CONFIG_SPORT0_ERROR - 7) << SPORT0_ERROR_POS) |
41 ((CONFIG_SPI_ERROR - 7) << SPI_ERROR_POS) |
42 ((CONFIG_SPORT1_ERROR - 7) << SPORT1_ERROR_POS) |
43 ((CONFIG_UART_ERROR - 7) << UART_ERROR_POS) |
44 ((CONFIG_RTC_ERROR - 7) << RTC_ERROR_POS));
45
46 bfin_write_SIC_IAR1(((CONFIG_DMA0_PPI - 7) << DMA0_PPI_POS) |
47 ((CONFIG_DMA1_SPORT0RX - 7) << DMA1_SPORT0RX_POS) |
48 ((CONFIG_DMA2_SPORT0TX - 7) << DMA2_SPORT0TX_POS) |
49 ((CONFIG_DMA3_SPORT1RX - 7) << DMA3_SPORT1RX_POS) |
50 ((CONFIG_DMA4_SPORT1TX - 7) << DMA4_SPORT1TX_POS) |
51 ((CONFIG_DMA5_SPI - 7) << DMA5_SPI_POS) |
52 ((CONFIG_DMA6_UARTRX - 7) << DMA6_UARTRX_POS) |
53 ((CONFIG_DMA7_UARTTX - 7) << DMA7_UARTTX_POS));
54
55 bfin_write_SIC_IAR2(((CONFIG_TIMER0 - 7) << TIMER0_POS) |
56 ((CONFIG_TIMER1 - 7) << TIMER1_POS) |
57 ((CONFIG_TIMER2 - 7) << TIMER2_POS) |
58 ((CONFIG_PFA - 7) << PFA_POS) |
59 ((CONFIG_PFB - 7) << PFB_POS) |
60 ((CONFIG_MEMDMA0 - 7) << MEMDMA0_POS) |
61 ((CONFIG_MEMDMA1 - 7) << MEMDMA1_POS) |
62 ((CONFIG_WDTIMER - 7) << WDTIMER_POS));
63
64 SSYNC();
65}
generated by cgit v1.2.2 (git 2.25.0) at 2025-01-01 15:08:31 -0500