Blackfin: move SPORT UART resources to boards files

Rather than keeping the pins in the actual driver and worrying about a
mess of Kconfig options, declare all the desired pin resources in the
boards file.  This lets people easily select the specific pins/ports for
the normal emulated UART as well as GPIOs for CTS/RTS.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>

1 files changed, 63 insertions, 0 deletions

diff --git a/arch/blackfin/mach-bf533/boards/blackstamp.c b/arch/blackfin/mach-bf533/boards/blackstamp.c
index 50ce3ecfdcb2..4d9294642f10 100644
--- a/arch/blackfin/mach-bf533/boards/blackstamp.c
+++ b/arch/blackfin/mach-bf533/boards/blackstamp.c
@@ -270,16 +270,75 @@ static struct platform_device bfin_sir0_device = {
 #endif
 
 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+static struct resource bfin_sport0_uart_resources[] = {
+        {
+                .start = SPORT0_TCR1,
+                .end = SPORT0_MRCS3+4,
+                .flags = IORESOURCE_MEM,
+        },
+        {
+                .start = IRQ_SPORT0_RX,
+                .end = IRQ_SPORT0_RX+1,
+                .flags = IORESOURCE_IRQ,
+        },
+        {
+                .start = IRQ_SPORT0_ERROR,
+                .end = IRQ_SPORT0_ERROR,
+                .flags = IORESOURCE_IRQ,
+        },
+};
+
+unsigned short bfin_sport0_peripherals[] = {
+        P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
+        P_SPORT0_DRPRI, P_SPORT0_RSCLK, P_SPORT0_DRSEC, P_SPORT0_DTSEC, 0
+};
+
 static struct platform_device bfin_sport0_uart_device = {
         .name = "bfin-sport-uart",
         .id = 0,
+        .num_resources = ARRAY_SIZE(bfin_sport0_uart_resources),
+        .resource = bfin_sport0_uart_resources,
+        .dev = {
+                .platform_data = &bfin_sport0_peripherals, /* Passed to driver */
+        },
+};
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+static struct resource bfin_sport1_uart_resources[] = {
+        {
+                .start = SPORT1_TCR1,
+                .end = SPORT1_MRCS3+4,
+                .flags = IORESOURCE_MEM,
+        },
+        {
+                .start = IRQ_SPORT1_RX,
+                .end = IRQ_SPORT1_RX+1,
+                .flags = IORESOURCE_IRQ,
+        },
+        {
+                .start = IRQ_SPORT1_ERROR,
+                .end = IRQ_SPORT1_ERROR,
+                .flags = IORESOURCE_IRQ,
+        },
+};
+
+unsigned short bfin_sport1_peripherals[] = {
+        P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS,
+        P_SPORT1_DRPRI, P_SPORT1_RSCLK, P_SPORT1_DRSEC, P_SPORT1_DTSEC, 0
 };
 
 static struct platform_device bfin_sport1_uart_device = {
         .name = "bfin-sport-uart",
         .id = 1,
+        .num_resources = ARRAY_SIZE(bfin_sport1_uart_resources),
+        .resource = bfin_sport1_uart_resources,
+        .dev = {
+                .platform_data = &bfin_sport1_peripherals, /* Passed to driver */
+        },
 };
 #endif
+#endif
 
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
 #include <linux/input.h>
@@ -385,9 +444,13 @@ static struct platform_device *stamp_devices[] __initdata = {
 #endif
 
 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
         &bfin_sport0_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
         &bfin_sport1_uart_device,
 #endif
+#endif
 
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
         &bfin_device_gpiokeys,