Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6: (171 commits)
  Blackfin arch: fix bug - BF527 0.2 silicon has different CPUID (DSPID) value
  Blackfin arch: Enlarge flash partition for kenel for bf533/bf537 boards
  Blackfin arch: fix bug: kernel crash when enable SDIO host driver
  Blackfin arch: Print FP at level KERN_NOTICE
  Blackfin arch: drop ad73311 test code
  Blackfin arch: update board default configs
  Blackfin arch: Set PB4 as the default irq for bf548 board v1.4+.
  Blackfin arch: fix typo in early printk bit size processing
  Blackfin arch: enable reprogram cclk and sclk for bf518f-ezbrd
  Blackfin arch: add SDIO host driver platform data
  Blackfin arch: fix bug - kernel stops at initial console
  Blackfin arch: fix bug - kernel crash after config IP for ethernet port
  Blackfin arch: add sdh support for bf518f-ezbrd
  Blackfin arch: fix bug - kernel detects BF532 incorrectly
  Blackfin arch: add () to avoid warnings from gcc
  Blackfin arch: change HWTRACE Kconfig and set it on default
  Blackfin arch: Clean oprofile build path for blackfin
  Blackfin arch: remove hardware PM code, oprofile not use it
  Blackfin arch: rewrite get_sclk()/get_vco()
  Blackfin arch: cleanup and unify the ins functions
  ...

9 files changed, 158 insertions, 552 deletions

diff --git a/arch/blackfin/mach-bf527/include/mach/anomaly.h b/arch/blackfin/mach-bf527/include/mach/anomaly.h
index 62373e61c585..035e8d835058 100644
--- a/arch/blackfin/mach-bf527/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf527/include/mach/anomaly.h
@@ -28,7 +28,7 @@
 /* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot2 Not Supported */
 #define ANOMALY_05000074 (1)
 /* DMA_RUN Bit Is Not Valid after a Peripheral Receive Channel DMA Stops */
-#define ANOMALY_05000119 (1)
+#define ANOMALY_05000119 (1)    /* note: brokenness is noted in documentation, not anomaly sheet */
 /* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */
 #define ANOMALY_05000122 (1)
 /* Spurious Hardware Error from an Access in the Shadow of a Conditional Branch */
@@ -37,8 +37,6 @@
 #define ANOMALY_05000265 (1)
 /* False Hardware Errors Caused by Fetches at the Boundary of Reserved Memory */
 #define ANOMALY_05000310 (1)
-/* Errors when SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */
-#define ANOMALY_05000312 (ANOMALY_BF527)
 /* PPI Is Level-Sensitive on First Transfer In Single Frame Sync Modes */
 #define ANOMALY_05000313 (__SILICON_REVISION__ < 2)
 /* Incorrect Access of OTP_STATUS During otp_write() Function */
@@ -153,6 +151,10 @@
 #define ANOMALY_05000430 (ANOMALY_BF527 && __SILICON_REVISION__ > 1)
 /* bfrom_SysControl() Does Not Clear SIC_IWR1 Before Executing PLL Programming Sequence */
 #define ANOMALY_05000432 (ANOMALY_BF526)
+/* Certain SIC Registers are not Reset After Soft or Core Double Fault Reset */
+#define ANOMALY_05000435 ((ANOMALY_BF526 && __SILICON_REVISION__ < 1) || ANOMALY_BF527)
+/* IFLUSH Instruction at End of Hardware Loop Causes Infinite Stall */
+#define ANOMALY_05000443 (1)
 
 /* Anomalies that don't exist on this proc */
 #define ANOMALY_05000125 (0)
@@ -168,7 +170,9 @@
 #define ANOMALY_05000285 (0)
 #define ANOMALY_05000307 (0)
 #define ANOMALY_05000311 (0)
+#define ANOMALY_05000312 (0)
 #define ANOMALY_05000323 (0)
 #define ANOMALY_05000363 (0)
+#define ANOMALY_05000412 (0)
 
 #endif
diff --git a/arch/blackfin/mach-bf527/include/mach/bf527.h b/arch/blackfin/mach-bf527/include/mach/bf527.h
index 144f08d3f8ea..3832aab11e9a 100644
--- a/arch/blackfin/mach-bf527/include/mach/bf527.h
+++ b/arch/blackfin/mach-bf527/include/mach/bf527.h
@@ -110,7 +110,7 @@
 
 #ifdef CONFIG_BF527
 #define CPU "BF527"
-#define CPUID 0x27e4
+#define CPUID 0x27e0
 #endif
 #ifdef CONFIG_BF526
 #define CPU "BF526"
@@ -118,7 +118,7 @@
 #endif
 #ifdef CONFIG_BF525
 #define CPU "BF525"
-#define CPUID 0x27e4
+#define CPUID 0x27e0
 #endif
 #ifdef CONFIG_BF524
 #define CPU "BF524"
@@ -126,7 +126,7 @@
 #endif
 #ifdef CONFIG_BF523
 #define CPU "BF523"
-#define CPUID 0x27e4
+#define CPUID 0x27e0
 #endif
 #ifdef CONFIG_BF522
 #define CPU "BF522"
@@ -134,7 +134,7 @@
 #endif
 
 #ifndef CPU
-#error Unknown CPU type - This kernel doesn't seem to be configured properly
+#error "Unknown CPU type - This kernel doesn't seem to be configured properly"
 #endif
 
 #endif                          /* __MACH_BF527_H__  */
diff --git a/arch/blackfin/mach-bf527/include/mach/bfin_sir.h b/arch/blackfin/mach-bf527/include/mach/bfin_sir.h
deleted file mode 100644
index cfd8ad4f1f2c..000000000000
--- a/arch/blackfin/mach-bf527/include/mach/bfin_sir.h
+++ /dev/null
@@ -1,142 +0,0 @@
-/*
- * Blackfin Infra-red Driver
- *
- * Copyright 2006-2008 Analog Devices Inc.
- *
- * Enter bugs at http://blackfin.uclinux.org/
- *
- * Licensed under the GPL-2 or later.
- *
- */
-
-#include <linux/serial.h>
-#include <asm/dma.h>
-#include <asm/portmux.h>
-
-#define SIR_UART_GET_CHAR(port)   bfin_read16((port)->membase + OFFSET_RBR)
-#define SIR_UART_GET_DLL(port)    bfin_read16((port)->membase + OFFSET_DLL)
-#define SIR_UART_GET_IER(port)    bfin_read16((port)->membase + OFFSET_IER)
-#define SIR_UART_GET_DLH(port)    bfin_read16((port)->membase + OFFSET_DLH)
-#define SIR_UART_GET_IIR(port)    bfin_read16((port)->membase + OFFSET_IIR)
-#define SIR_UART_GET_LCR(port)    bfin_read16((port)->membase + OFFSET_LCR)
-#define SIR_UART_GET_GCTL(port)   bfin_read16((port)->membase + OFFSET_GCTL)
-
-#define SIR_UART_PUT_CHAR(port, v) bfin_write16(((port)->membase + OFFSET_THR), v)
-#define SIR_UART_PUT_DLL(port, v)  bfin_write16(((port)->membase + OFFSET_DLL), v)
-#define SIR_UART_PUT_IER(port, v)  bfin_write16(((port)->membase + OFFSET_IER), v)
-#define SIR_UART_PUT_DLH(port, v)  bfin_write16(((port)->membase + OFFSET_DLH), v)
-#define SIR_UART_PUT_LCR(port, v)  bfin_write16(((port)->membase + OFFSET_LCR), v)
-#define SIR_UART_PUT_GCTL(port, v) bfin_write16(((port)->membase + OFFSET_GCTL), v)
-
-#ifdef CONFIG_SIR_BFIN_DMA
-struct dma_rx_buf {
-        char *buf;
-        int head;
-        int tail;
-        };
-#endif /* CONFIG_SIR_BFIN_DMA */
-
-struct bfin_sir_port {
-        unsigned char __iomem   *membase;
-        unsigned int            irq;
-        unsigned int            lsr;
-        unsigned long           clk;
-        struct net_device       *dev;
-#ifdef CONFIG_SIR_BFIN_DMA
-        int                     tx_done;
-        struct dma_rx_buf       rx_dma_buf;
-        struct timer_list       rx_dma_timer;
-        int                     rx_dma_nrows;
-#endif /* CONFIG_SIR_BFIN_DMA */
-        unsigned int            tx_dma_channel;
-        unsigned int            rx_dma_channel;
-};
-
-struct bfin_sir_port sir_ports[BFIN_UART_NR_PORTS];
-
-struct bfin_sir_port_res {
-        unsigned long   base_addr;
-        int             irq;
-        unsigned int    rx_dma_channel;
-        unsigned int    tx_dma_channel;
-};
-
-struct bfin_sir_port_res bfin_sir_port_resource[] = {
-#ifdef CONFIG_BFIN_SIR0
-        {
-        0xFFC00400,
-        IRQ_UART0_RX,
-        CH_UART0_RX,
-        CH_UART0_TX,
-        },
-#endif
-#ifdef CONFIG_BFIN_SIR1
-        {
-        0xFFC02000,
-        IRQ_UART1_RX,
-        CH_UART1_RX,
-        CH_UART1_TX,
-        },
-#endif
-};
-
-int nr_sirs = ARRAY_SIZE(bfin_sir_port_resource);
-
-struct bfin_sir_self {
-        struct bfin_sir_port    *sir_port;
-        spinlock_t              lock;
-        unsigned int            open;
-        int                     speed;
-        int                     newspeed;
-
-        struct sk_buff          *txskb;
-        struct sk_buff          *rxskb;
-        struct net_device_stats stats;
-        struct device           *dev;
-        struct irlap_cb         *irlap;
-        struct qos_info         qos;
-
-        iobuff_t                tx_buff;
-        iobuff_t                rx_buff;
-
-        struct work_struct      work;
-        int                     mtt;
-};
-
-static inline unsigned int SIR_UART_GET_LSR(struct bfin_sir_port *port)
-{
-        unsigned int lsr = bfin_read16(port->membase + OFFSET_LSR);
-        port->lsr |= (lsr & (BI|FE|PE|OE));
-        return lsr | port->lsr;
-}
-
-static inline void SIR_UART_CLEAR_LSR(struct bfin_sir_port *port)
-{
-        port->lsr = 0;
-        bfin_read16(port->membase + OFFSET_LSR);
-}
-
-#define DRIVER_NAME "bfin_sir"
-
-static int bfin_sir_hw_init(void)
-{
-        int ret = -ENODEV;
-#ifdef CONFIG_BFIN_SIR0
-        ret = peripheral_request(P_UART0_TX, DRIVER_NAME);
-        if (ret)
-                return ret;
-        ret = peripheral_request(P_UART0_RX, DRIVER_NAME);
-        if (ret)
-                return ret;
-#endif
-
-#ifdef CONFIG_BFIN_SIR1
-        ret = peripheral_request(P_UART1_TX, DRIVER_NAME);
-        if (ret)
-                return ret;
-        ret = peripheral_request(P_UART1_RX, DRIVER_NAME);
-        if (ret)
-                return ret;
-#endif
-        return ret;
-}
diff --git a/arch/blackfin/mach-bf527/include/mach/cdefBF52x_base.h b/arch/blackfin/mach-bf527/include/mach/cdefBF52x_base.h
index 9a814b9a12b9..1fe76d8e0403 100644
--- a/arch/blackfin/mach-bf527/include/mach/cdefBF52x_base.h
+++ b/arch/blackfin/mach-bf527/include/mach/cdefBF52x_base.h
@@ -31,7 +31,6 @@
 #ifndef _CDEF_BF52X_H
 #define _CDEF_BF52X_H
 
-#include <asm/system.h>
 #include <asm/blackfin.h>
 
 #include "defBF52x_base.h"
@@ -43,57 +42,9 @@
 
 /* Clock and System Control     (0xFFC00000 - 0xFFC000FF)                                                               */
 #define bfin_read_PLL_CTL()                     bfin_read16(PLL_CTL)
-/* Writing to PLL_CTL initiates a PLL relock sequence. */
-static __inline__ void bfin_write_PLL_CTL(unsigned int val)
-{
-        unsigned long flags, iwr0, iwr1;
-
-        if (val == bfin_read_PLL_CTL())
-                return;
-
-        local_irq_save(flags);
-        /* Enable the PLL Wakeup bit in SIC IWR */
-        iwr0 = bfin_read32(SIC_IWR0);
-        iwr1 = bfin_read32(SIC_IWR1);
-        /* Only allow PPL Wakeup) */
-        bfin_write32(SIC_IWR0, IWR_ENABLE(0));
-        bfin_write32(SIC_IWR1, 0);
-
-        bfin_write16(PLL_CTL, val);
-        SSYNC();
-        asm("IDLE;");
-
-        bfin_write32(SIC_IWR0, iwr0);
-        bfin_write32(SIC_IWR1, iwr1);
-        local_irq_restore(flags);
-}
 #define bfin_read_PLL_DIV()                     bfin_read16(PLL_DIV)
 #define bfin_write_PLL_DIV(val)                 bfin_write16(PLL_DIV, val)
 #define bfin_read_VR_CTL()                      bfin_read16(VR_CTL)
-/* Writing to VR_CTL initiates a PLL relock sequence. */
-static __inline__ void bfin_write_VR_CTL(unsigned int val)
-{
-        unsigned long flags, iwr0, iwr1;
-
-        if (val == bfin_read_VR_CTL())
-                return;
-
-        local_irq_save(flags);
-        /* Enable the PLL Wakeup bit in SIC IWR */
-        iwr0 = bfin_read32(SIC_IWR0);
-        iwr1 = bfin_read32(SIC_IWR1);
-        /* Only allow PPL Wakeup) */
-        bfin_write32(SIC_IWR0, IWR_ENABLE(0));
-        bfin_write32(SIC_IWR1, 0);
-
-        bfin_write16(VR_CTL, val);
-        SSYNC();
-        asm("IDLE;");
-
-        bfin_write32(SIC_IWR0, iwr0);
-        bfin_write32(SIC_IWR1, iwr1);
-        local_irq_restore(flags);
-}
 #define bfin_read_PLL_STAT()                    bfin_read16(PLL_STAT)
 #define bfin_write_PLL_STAT(val)                bfin_write16(PLL_STAT, val)
 #define bfin_read_PLL_LOCKCNT()                 bfin_read16(PLL_LOCKCNT)
@@ -1201,4 +1152,57 @@ static __inline__ void bfin_write_VR_CTL(unsigned int val)
 #define bfin_read_NFC_DATA_RD()                 bfin_read16(NFC_DATA_RD)
 #define bfin_write_NFC_DATA_RD(val)             bfin_write16(NFC_DATA_RD, val)
 
+/* These need to be last due to the cdef/linux inter-dependencies */
+#include <asm/irq.h>
+
+/* Writing to PLL_CTL initiates a PLL relock sequence. */
+static __inline__ void bfin_write_PLL_CTL(unsigned int val)
+{
+        unsigned long flags, iwr0, iwr1;
+
+        if (val == bfin_read_PLL_CTL())
+                return;
+
+        local_irq_save_hw(flags);
+        /* Enable the PLL Wakeup bit in SIC IWR */
+        iwr0 = bfin_read32(SIC_IWR0);
+        iwr1 = bfin_read32(SIC_IWR1);
+        /* Only allow PPL Wakeup) */
+        bfin_write32(SIC_IWR0, IWR_ENABLE(0));
+        bfin_write32(SIC_IWR1, 0);
+
+        bfin_write16(PLL_CTL, val);
+        SSYNC();
+        asm("IDLE;");
+
+        bfin_write32(SIC_IWR0, iwr0);
+        bfin_write32(SIC_IWR1, iwr1);
+        local_irq_restore_hw(flags);
+}
+
+/* Writing to VR_CTL initiates a PLL relock sequence. */
+static __inline__ void bfin_write_VR_CTL(unsigned int val)
+{
+        unsigned long flags, iwr0, iwr1;
+
+        if (val == bfin_read_VR_CTL())
+                return;
+
+        local_irq_save_hw(flags);
+        /* Enable the PLL Wakeup bit in SIC IWR */
+        iwr0 = bfin_read32(SIC_IWR0);
+        iwr1 = bfin_read32(SIC_IWR1);
+        /* Only allow PPL Wakeup) */
+        bfin_write32(SIC_IWR0, IWR_ENABLE(0));
+        bfin_write32(SIC_IWR1, 0);
+
+        bfin_write16(VR_CTL, val);
+        SSYNC();
+        asm("IDLE;");
+
+        bfin_write32(SIC_IWR0, iwr0);
+        bfin_write32(SIC_IWR1, iwr1);
+        local_irq_restore_hw(flags);
+}
+
 #endif /* _CDEF_BF52X_H */
diff --git a/arch/blackfin/mach-bf527/include/mach/dma.h b/arch/blackfin/mach-bf527/include/mach/dma.h
index 49dd693223e8..eb287da101a2 100644
--- a/arch/blackfin/mach-bf527/include/mach/dma.h
+++ b/arch/blackfin/mach-bf527/include/mach/dma.h
@@ -1,38 +1,14 @@
-/*
- * file:        include/asm-blackfin/mach-bf527/dma.h
- * based on:    include/asm-blackfin/mach-bf537/dma.h
- * author:      Michael Hennerich (michael.hennerich@analog.com)
+/* mach/dma.h - arch-specific DMA defines
  *
- * created:
- * description:
- *      system DMA map
- * rev:
+ * Copyright 2004-2008 Analog Devices Inc.
  *
- * modified:
- *
- *
- * bugs:         enter bugs at http://blackfin.uclinux.org/
- *
- * this program is free software; you can redistribute it and/or modify
- * it under the terms of the gnu general public license as published by
- * the free software foundation; either version 2, or (at your option)
- * any later version.
- *
- * this program is distributed in the hope that it will be useful,
- * but without any warranty; without even the implied warranty of
- * merchantability or fitness for a particular purpose.  see the
- * gnu general public license for more details.
- *
- * you should have received a copy of the gnu general public license
- * along with this program; see the file copying.
- * if not, write to the free software foundation,
- * 59 temple place - suite 330, boston, ma 02111-1307, usa.
+ * Licensed under the GPL-2 or later.
  */
 
 #ifndef _MACH_DMA_H_
 #define _MACH_DMA_H_
 
-#define MAX_BLACKFIN_DMA_CHANNEL 16
+#define MAX_DMA_CHANNELS 16
 
 #define CH_PPI                  0       /* PPI receive/transmit or NFC */
 #define CH_EMAC_RX              1       /* Ethernet MAC receive or HOSTDP */
diff --git a/arch/blackfin/mach-bf527/include/mach/gpio.h b/arch/blackfin/mach-bf527/include/mach/gpio.h
new file mode 100644
index 000000000000..06b6eebf0d49
--- /dev/null
+++ b/arch/blackfin/mach-bf527/include/mach/gpio.h
@@ -0,0 +1,68 @@
+/*
+ * File: arch/blackfin/mach-bf527/include/mach/gpio.h
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * Copyright (C) 2008 Analog Devices Inc.
+ * Licensed under the GPL-2 or later.
+ */
+
+
+#ifndef _MACH_GPIO_H_
+#define _MACH_GPIO_H_
+
+#define MAX_BLACKFIN_GPIOS 48
+
+#define GPIO_PF0        0
+#define GPIO_PF1        1
+#define GPIO_PF2        2
+#define GPIO_PF3        3
+#define GPIO_PF4        4
+#define GPIO_PF5        5
+#define GPIO_PF6        6
+#define GPIO_PF7        7
+#define GPIO_PF8        8
+#define GPIO_PF9        9
+#define GPIO_PF10       10
+#define GPIO_PF11       11
+#define GPIO_PF12       12
+#define GPIO_PF13       13
+#define GPIO_PF14       14
+#define GPIO_PF15       15
+#define GPIO_PG0        16
+#define GPIO_PG1        17
+#define GPIO_PG2        18
+#define GPIO_PG3        19
+#define GPIO_PG4        20
+#define GPIO_PG5        21
+#define GPIO_PG6        22
+#define GPIO_PG7        23
+#define GPIO_PG8        24
+#define GPIO_PG9        25
+#define GPIO_PG10       26
+#define GPIO_PG11       27
+#define GPIO_PG12       28
+#define GPIO_PG13       29
+#define GPIO_PG14       30
+#define GPIO_PG15       31
+#define GPIO_PH0        32
+#define GPIO_PH1        33
+#define GPIO_PH2        34
+#define GPIO_PH3        35
+#define GPIO_PH4        36
+#define GPIO_PH5        37
+#define GPIO_PH6        38
+#define GPIO_PH7        39
+#define GPIO_PH8        40
+#define GPIO_PH9        41
+#define GPIO_PH10       42
+#define GPIO_PH11       43
+#define GPIO_PH12       44
+#define GPIO_PH13       45
+#define GPIO_PH14       46
+#define GPIO_PH15       47
+
+#define PORT_F GPIO_PF0
+#define PORT_G GPIO_PG0
+#define PORT_H GPIO_PH0
+
+#endif /* _MACH_GPIO_H_ */
diff --git a/arch/blackfin/mach-bf527/include/mach/irq.h b/arch/blackfin/mach-bf527/include/mach/irq.h
index 4e2b3f2020e5..8ea660d8151f 100644
--- a/arch/blackfin/mach-bf527/include/mach/irq.h
+++ b/arch/blackfin/mach-bf527/include/mach/irq.h
@@ -96,14 +96,14 @@
 #define IRQ_MAC_TX              BFIN_IRQ(30)    /* DMA2 Channel (MAC TX/NAND) */
 #define IRQ_NFC                 BFIN_IRQ(30)    /* DMA2 Channel (MAC TX/NAND) */
 #define IRQ_PORTH_INTB          BFIN_IRQ(31)    /* Port H Interrupt B */
-#define IRQ_TMR0                BFIN_IRQ(32)    /* Timer 0 */
-#define IRQ_TMR1                BFIN_IRQ(33)    /* Timer 1 */
-#define IRQ_TMR2                BFIN_IRQ(34)    /* Timer 2 */
-#define IRQ_TMR3                BFIN_IRQ(35)    /* Timer 3 */
-#define IRQ_TMR4                BFIN_IRQ(36)    /* Timer 4 */
-#define IRQ_TMR5                BFIN_IRQ(37)    /* Timer 5 */
-#define IRQ_TMR6                BFIN_IRQ(38)    /* Timer 6 */
-#define IRQ_TMR7                BFIN_IRQ(39)    /* Timer 7 */
+#define IRQ_TIMER0              BFIN_IRQ(32)    /* Timer 0 */
+#define IRQ_TIMER1              BFIN_IRQ(33)    /* Timer 1 */
+#define IRQ_TIMER2              BFIN_IRQ(34)    /* Timer 2 */
+#define IRQ_TIMER3              BFIN_IRQ(35)    /* Timer 3 */
+#define IRQ_TIMER4              BFIN_IRQ(36)    /* Timer 4 */
+#define IRQ_TIMER5              BFIN_IRQ(37)    /* Timer 5 */
+#define IRQ_TIMER6              BFIN_IRQ(38)    /* Timer 6 */
+#define IRQ_TIMER7              BFIN_IRQ(39)    /* Timer 7 */
 #define IRQ_PORTG_INTA          BFIN_IRQ(40)    /* Port G Interrupt A */
 #define IRQ_PORTG_INTB          BFIN_IRQ(41)    /* Port G Interrupt B */
 #define IRQ_MEM_DMA0            BFIN_IRQ(42)    /* MDMA Stream 0 */
@@ -227,14 +227,14 @@
 #define IRQ_PORTH_INTB_POS      28
 
 /* IAR4 BIT FIELDS */
-#define IRQ_TMR0_POS            0
-#define IRQ_TMR1_POS            4
-#define IRQ_TMR2_POS            8
-#define IRQ_TMR3_POS            12
-#define IRQ_TMR4_POS            16
-#define IRQ_TMR5_POS            20
-#define IRQ_TMR6_POS            24
-#define IRQ_TMR7_POS            28
+#define IRQ_TIMER0_POS          0
+#define IRQ_TIMER1_POS          4
+#define IRQ_TIMER2_POS          8
+#define IRQ_TIMER3_POS          12
+#define IRQ_TIMER4_POS          16
+#define IRQ_TIMER5_POS          20
+#define IRQ_TIMER6_POS          24
+#define IRQ_TIMER7_POS          28
 
 /* IAR5 BIT FIELDS */
 #define IRQ_PORTG_INTA_POS      0
diff --git a/arch/blackfin/mach-bf527/include/mach/mem_init.h b/arch/blackfin/mach-bf527/include/mach/mem_init.h
deleted file mode 100644
index cbe03f4a5698..000000000000
--- a/arch/blackfin/mach-bf527/include/mach/mem_init.h
+++ /dev/null
@@ -1,310 +0,0 @@
-/*
- * File:         include/asm-blackfin/mach-bf527/mem_init.h
- * Based on:
- * Author:
- *
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- *               Copyright 2004-2007 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- */
-
-#if (CONFIG_MEM_MT48LC16M16A2TG_75 || CONFIG_MEM_MT48LC64M4A2FB_7E || CONFIG_MEM_MT48LC16M8A2TG_75 || CONFIG_MEM_GENERIC_BOARD || CONFIG_MEM_MT48LC32M8A2_75 || CONFIG_MEM_MT48LC32M16A2TG_75)
-#if (CONFIG_SCLK_HZ > 119402985)
-#define SDRAM_tRP       TRP_2
-#define SDRAM_tRP_num   2
-#define SDRAM_tRAS      TRAS_7
-#define SDRAM_tRAS_num  7
-#define SDRAM_tRCD      TRCD_2
-#define SDRAM_tWR       TWR_2
-#endif
-#if (CONFIG_SCLK_HZ > 104477612) && (CONFIG_SCLK_HZ <= 119402985)
-#define SDRAM_tRP       TRP_2
-#define SDRAM_tRP_num   2
-#define SDRAM_tRAS      TRAS_6
-#define SDRAM_tRAS_num  6
-#define SDRAM_tRCD      TRCD_2
-#define SDRAM_tWR       TWR_2
-#endif
-#if (CONFIG_SCLK_HZ > 89552239) && (CONFIG_SCLK_HZ <= 104477612)
-#define SDRAM_tRP       TRP_2
-#define SDRAM_tRP_num   2
-#define SDRAM_tRAS      TRAS_5
-#define SDRAM_tRAS_num  5
-#define SDRAM_tRCD      TRCD_2
-#define SDRAM_tWR       TWR_2
-#endif
-#if (CONFIG_SCLK_HZ > 74626866) && (CONFIG_SCLK_HZ <= 89552239)
-#define SDRAM_tRP       TRP_2
-#define SDRAM_tRP_num   2
-#define SDRAM_tRAS      TRAS_4
-#define SDRAM_tRAS_num  4
-#define SDRAM_tRCD      TRCD_2
-#define SDRAM_tWR       TWR_2
-#endif
-#if (CONFIG_SCLK_HZ > 66666667) && (CONFIG_SCLK_HZ <= 74626866)
-#define SDRAM_tRP       TRP_2
-#define SDRAM_tRP_num   2
-#define SDRAM_tRAS      TRAS_3
-#define SDRAM_tRAS_num  3
-#define SDRAM_tRCD      TRCD_2
-#define SDRAM_tWR       TWR_2
-#endif
-#if (CONFIG_SCLK_HZ > 59701493) && (CONFIG_SCLK_HZ <= 66666667)
-#define SDRAM_tRP       TRP_1
-#define SDRAM_tRP_num   1
-#define SDRAM_tRAS      TRAS_4
-#define SDRAM_tRAS_num  3
-#define SDRAM_tRCD      TRCD_1
-#define SDRAM_tWR       TWR_2
-#endif
-#if (CONFIG_SCLK_HZ > 44776119) && (CONFIG_SCLK_HZ <= 59701493)
-#define SDRAM_tRP       TRP_1
-#define SDRAM_tRP_num   1
-#define SDRAM_tRAS      TRAS_3
-#define SDRAM_tRAS_num  3
-#define SDRAM_tRCD      TRCD_1
-#define SDRAM_tWR       TWR_2
-#endif
-#if (CONFIG_SCLK_HZ > 29850746) && (CONFIG_SCLK_HZ <= 44776119)
-#define SDRAM_tRP       TRP_1
-#define SDRAM_tRP_num   1
-#define SDRAM_tRAS      TRAS_2
-#define SDRAM_tRAS_num  2
-#define SDRAM_tRCD      TRCD_1
-#define SDRAM_tWR       TWR_2
-#endif
-#if (CONFIG_SCLK_HZ <= 29850746)
-#define SDRAM_tRP       TRP_1
-#define SDRAM_tRP_num   1
-#define SDRAM_tRAS      TRAS_1
-#define SDRAM_tRAS_num  1
-#define SDRAM_tRCD      TRCD_1
-#define SDRAM_tWR       TWR_2
-#endif
-#endif
-
-#if (CONFIG_MEM_MT48LC16M16A2TG_75)
-  /*SDRAM INFORMATION: */
-#define SDRAM_Tref  64          /* Refresh period in milliseconds   */
-#define SDRAM_NRA   8192        /* Number of row addresses in SDRAM */
-#define SDRAM_CL    CL_3
-#endif
-
-#if (CONFIG_MEM_MT48LC16M8A2TG_75)
-  /*SDRAM INFORMATION: */
-#define SDRAM_Tref  64          /* Refresh period in milliseconds   */
-#define SDRAM_NRA   4096        /* Number of row addresses in SDRAM */
-#define SDRAM_CL    CL_3
-#endif
-
-#if (CONFIG_MEM_MT48LC32M8A2_75)
-  /*SDRAM INFORMATION: */
-#define SDRAM_Tref  64          /* Refresh period in milliseconds   */
-#define SDRAM_NRA   8192        /* Number of row addresses in SDRAM */
-#define SDRAM_CL    CL_3
-#endif
-
-#if (CONFIG_MEM_MT48LC64M4A2FB_7E)
-  /*SDRAM INFORMATION: */
-#define SDRAM_Tref  64          /* Refresh period in milliseconds   */
-#define SDRAM_NRA   8192        /* Number of row addresses in SDRAM */
-#define SDRAM_CL    CL_3
-#endif
-
-#if (CONFIG_MEM_GENERIC_BOARD)
-  /*SDRAM INFORMATION: Modify this for your board */
-#define SDRAM_Tref  64          /* Refresh period in milliseconds   */
-#define SDRAM_NRA   8192        /* Number of row addresses in SDRAM */
-#define SDRAM_CL    CL_3
-#endif
-
-#if (CONFIG_MEM_MT48LC32M16A2TG_75)
-  /*SDRAM INFORMATION: */
-#define SDRAM_Tref  64          /* Refresh period in milliseconds   */
-#define SDRAM_NRA   8192        /* Number of row addresses in SDRAM */
-#define SDRAM_CL    CL_3
-#endif
-
-/* Equation from section 17 (p17-46) of BF533 HRM */
-#define mem_SDRRC       (((CONFIG_SCLK_HZ / 1000) * SDRAM_Tref) / SDRAM_NRA) - (SDRAM_tRAS_num + SDRAM_tRP_num)
-
-/* Enable SCLK Out */
-#define mem_SDGCTL        (SCTLE | SDRAM_CL | SDRAM_tRAS | SDRAM_tRP | SDRAM_tRCD | SDRAM_tWR | PSS)
-
-#if defined CONFIG_CLKIN_HALF
-#define CLKIN_HALF       1
-#else
-#define CLKIN_HALF       0
-#endif
-
-#if defined CONFIG_PLL_BYPASS
-#define PLL_BYPASS      1
-#else
-#define PLL_BYPASS       0
-#endif
-
-/***************************************Currently Not Being Used *********************************/
-#define flash_EBIU_AMBCTL_WAT  ((CONFIG_FLASH_SPEED_BWAT * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1
-#define flash_EBIU_AMBCTL_RAT  ((CONFIG_FLASH_SPEED_BRAT * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1
-#define flash_EBIU_AMBCTL_HT   ((CONFIG_FLASH_SPEED_BHT  * 4) / (4000000000 / CONFIG_SCLK_HZ))
-#define flash_EBIU_AMBCTL_ST   ((CONFIG_FLASH_SPEED_BST  * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1
-#define flash_EBIU_AMBCTL_TT   ((CONFIG_FLASH_SPEED_BTT  * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1
-
-#if (flash_EBIU_AMBCTL_TT > 3)
-#define flash_EBIU_AMBCTL0_TT   B0TT_4
-#endif
-#if (flash_EBIU_AMBCTL_TT == 3)
-#define flash_EBIU_AMBCTL0_TT   B0TT_3
-#endif
-#if (flash_EBIU_AMBCTL_TT == 2)
-#define flash_EBIU_AMBCTL0_TT   B0TT_2
-#endif
-#if (flash_EBIU_AMBCTL_TT < 2)
-#define flash_EBIU_AMBCTL0_TT   B0TT_1
-#endif
-
-#if (flash_EBIU_AMBCTL_ST > 3)
-#define flash_EBIU_AMBCTL0_ST   B0ST_4
-#endif
-#if (flash_EBIU_AMBCTL_ST == 3)
-#define flash_EBIU_AMBCTL0_ST   B0ST_3
-#endif
-#if (flash_EBIU_AMBCTL_ST == 2)
-#define flash_EBIU_AMBCTL0_ST   B0ST_2
-#endif
-#if (flash_EBIU_AMBCTL_ST < 2)
-#define flash_EBIU_AMBCTL0_ST   B0ST_1
-#endif
-
-#if (flash_EBIU_AMBCTL_HT > 2)
-#define flash_EBIU_AMBCTL0_HT   B0HT_3
-#endif
-#if (flash_EBIU_AMBCTL_HT == 2)
-#define flash_EBIU_AMBCTL0_HT   B0HT_2
-#endif
-#if (flash_EBIU_AMBCTL_HT == 1)
-#define flash_EBIU_AMBCTL0_HT   B0HT_1
-#endif
-#if (flash_EBIU_AMBCTL_HT == 0 && CONFIG_FLASH_SPEED_BHT == 0)
-#define flash_EBIU_AMBCTL0_HT   B0HT_0
-#endif
-#if (flash_EBIU_AMBCTL_HT == 0 && CONFIG_FLASH_SPEED_BHT != 0)
-#define flash_EBIU_AMBCTL0_HT   B0HT_1
-#endif
-
-#if (flash_EBIU_AMBCTL_WAT > 14)
-#define flash_EBIU_AMBCTL0_WAT  B0WAT_15
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 14)
-#define flash_EBIU_AMBCTL0_WAT  B0WAT_14
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 13)
-#define flash_EBIU_AMBCTL0_WAT  B0WAT_13
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 12)
-#define flash_EBIU_AMBCTL0_WAT  B0WAT_12
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 11)
-#define flash_EBIU_AMBCTL0_WAT  B0WAT_11
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 10)
-#define flash_EBIU_AMBCTL0_WAT  B0WAT_10
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 9)
-#define flash_EBIU_AMBCTL0_WAT  B0WAT_9
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 8)
-#define flash_EBIU_AMBCTL0_WAT  B0WAT_8
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 7)
-#define flash_EBIU_AMBCTL0_WAT  B0WAT_7
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 6)
-#define flash_EBIU_AMBCTL0_WAT  B0WAT_6
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 5)
-#define flash_EBIU_AMBCTL0_WAT  B0WAT_5
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 4)
-#define flash_EBIU_AMBCTL0_WAT  B0WAT_4
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 3)
-#define flash_EBIU_AMBCTL0_WAT  B0WAT_3
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 2)
-#define flash_EBIU_AMBCTL0_WAT  B0WAT_2
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 1)
-#define flash_EBIU_AMBCTL0_WAT  B0WAT_1
-#endif
-
-#if (flash_EBIU_AMBCTL_RAT > 14)
-#define flash_EBIU_AMBCTL0_RAT  B0RAT_15
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 14)
-#define flash_EBIU_AMBCTL0_RAT  B0RAT_14
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 13)
-#define flash_EBIU_AMBCTL0_RAT  B0RAT_13
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 12)
-#define flash_EBIU_AMBCTL0_RAT  B0RAT_12
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 11)
-#define flash_EBIU_AMBCTL0_RAT  B0RAT_11
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 10)
-#define flash_EBIU_AMBCTL0_RAT  B0RAT_10
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 9)
-#define flash_EBIU_AMBCTL0_RAT  B0RAT_9
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 8)
-#define flash_EBIU_AMBCTL0_RAT  B0RAT_8
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 7)
-#define flash_EBIU_AMBCTL0_RAT  B0RAT_7
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 6)
-#define flash_EBIU_AMBCTL0_RAT  B0RAT_6
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 5)
-#define flash_EBIU_AMBCTL0_RAT  B0RAT_5
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 4)
-#define flash_EBIU_AMBCTL0_RAT  B0RAT_4
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 3)
-#define flash_EBIU_AMBCTL0_RAT  B0RAT_3
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 2)
-#define flash_EBIU_AMBCTL0_RAT  B0RAT_2
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 1)
-#define flash_EBIU_AMBCTL0_RAT  B0RAT_1
-#endif
-
-#define flash_EBIU_AMBCTL0  \
-        (flash_EBIU_AMBCTL0_WAT | flash_EBIU_AMBCTL0_RAT | flash_EBIU_AMBCTL0_HT | \
-         flash_EBIU_AMBCTL0_ST | flash_EBIU_AMBCTL0_TT | CONFIG_FLASH_SPEED_RDYEN)
diff --git a/arch/blackfin/mach-bf527/include/mach/mem_map.h b/arch/blackfin/mach-bf527/include/mach/mem_map.h
index ef46dc991cd4..019e0017ad81 100644
--- a/arch/blackfin/mach-bf527/include/mach/mem_map.h
+++ b/arch/blackfin/mach-bf527/include/mach/mem_map.h
@@ -99,4 +99,10 @@
 #define L1_SCRATCH_START        0xFFB00000
 #define L1_SCRATCH_LENGTH       0x1000
 
+#define GET_PDA_SAFE(preg)              \
+        preg.l = _cpu_pda;              \
+        preg.h = _cpu_pda;
+
+#define GET_PDA(preg, dreg)     GET_PDA_SAFE(preg)
+
 #endif                          /* _MEM_MAP_527_H_ */